Inputs of antifouling paint-derived dichlorodiphenyltrichloroethanes (DDTs) to a typical mariculture zone (South China): potential impact on aquafarming environment

Existing evidence indicated that dichlorodiphenyltrichloroethane (DDT)-containing antifouling paints were an important source of DDT residues to mariculture zones. However, the magnitude of the impact on aquafarming environment has remained largely unknown. In the present study, the concentrations of DDT and its metabolites (designated as DDXs) were determined in harbor sediment and antifouling paint samples collected from a typical mariculture zone in South China. Compositional and concentration correlation analyses implicated the DDT-containing antifouling paints for fishing boat maintenance as an important source of DDT in the mariculture zone. The annual emission of DDXs to the study region was estimated at 0.58 tons/yr. Furthermore, a comparison of the expected DDT loadings in pelagic fish and field measurements indicated that fish feed especially trash fish was a major source of DDTs in the fish body. Nevertheless, the use of DDT-containing antifouling paints should be limited to prevent further deterioration in aquafarming environment.     

Photodegradation of the antifouling compounds Irgarol 1051 and Diuron released from a commercial antifouling paint

The antifouling compound Irgarol 1051 and its degradation product M1 (also known as GS26575), along with another antifouling compound Diuron, have recently been found in Japanese coastal waters. This study was undertaken to find the origin of these chemicals and investigate their aquatic fate. Five glass plates, each coated with 1 g of antifouling paint containing Irgarol and Diuron, were submerged in 250 ml of five different test waters and the plates removed after several months. The aqueous solutions were divided into two groups: one exposed to natural sunlight, and the other kept in the dark as a control. Irgarol and Diuron were detected in all aqueous solutions, suggesting leaching from antifouling paints is the origin of these antifouling biocides found in Japanese coastal waters. Under sunlight conditions, Irgarol underwent a rapid degradation to produce M1, which remained even after Irgarol had disappeared from the system. These compounds were persistent in any aqueous solutions tested under dark conditions, indicating high stability to hydrolysis. Diuron and M1 were more persistent than Irgarol under sunlight irradiation. Since these compounds have high herbicidal activities, their ultimate impact on aquatic ecosystems is closely related to their aquatic fate.     

Bioassays and selected chemical analysis of biocide-free antifouling coatings

Over the years several types of biocide-free antifouling paints have entered the market. The prohibition of biocidal antifouling paints in special areas of some European countries such as Sweden, Denmark and Germany has favoured the introduction of these paints to the market.

Several types of biocide-free antifouling paints were subjected to bioassays and selected chemical analysis of leachate and incorporated substances. Both non-eroding coatings (silicones, fibre coats, epoxies, polyurethane, polyvinyl) and eroding coatings (SPCs, ablative) were tested to exclude the presence of active biocides and dangerous compounds. The paints were subjected to the luminescent bacteria test and the cypris larvae settlement assay, the latter delivering information on toxicity as well as on efficacy.

The following chemical analyses of selected compounds of dry-film were performed:

• leaching-rate of organotin compounds from silicones and of nonylphenol and bisphenol A from epoxy and vinyl based coatings,

• concentration and leaching rate of selected organic compounds in polyurethane,

• concentration of heavy metals in eroding coatings.

The results of the bioassays indicated that none of the coatings analysed contained leachable biocides. Nevertheless, some products contained or leached dangerous compounds. The analyses revealed leaching of nonylphenol (up to 74.7 ng/cm²/d after 48 h) and bisphenol A (up to 2.77 ng/cm²/d after 24 h) from epoxy resins used as substitutes for antifouling paints. The heavy metal, zinc, was measured in dry paint film in quantities up to 576 000 ppm in erodable coatings, not incorporated as a biocide but to control the rate of erosion. Values for TBT in silicone elutriates were mostly below the detection limit of 0.005 mg/kg. Values for DBT ranged between <0.005 and 6.28 mg/kg, deriving from catalysts used as curing agents. Some biocide-free paints contained leachable, toxic and dangerous compounds in the dry film, some of which may act as substitutes for biocides or are incorporated as plasticizers or catalysts. Implications to environmental requirements and legislation are discussed.     

Production and use of DDT containing antifouling paint resulted in high DDTs residue in three paint factory sites and two shipyard sites, China

This study provides the first intensive investigation of Dichlorodiphenyltrichloroethanes (DDT) distribution in typical paint factories and shipyards in China where DDT containing antifouling paint were mass produced and used respectively. DDTs were analyzed in soil, sludge and sediment samples collected from three major paint factories and two shipyards. The results showed that the total DDTs concentrations detected in paint factory and shipyard sites ranged from 0.06 to 8387.24 mg kg⁻¹. In comparison with paint factory sites, the shipyard sites were much more seriously contaminated. However, for both kinds of sites, the DDTs level was found to be largely affected by history and capacity of production and use of DDT containing antifouling paint. (DDE + DDD)/DDT ratios indicated that DDT containing antifouling paint could serve as important fresh input sources for DDTs. It can be seen that most samples in shipyards were in ranges where heavy contamination and potential ecological risk were identified.     

A new simple method with high precision for determining the toxicity of antifouling paints on brine shrimp larvae (Artemia): first results

The use of antifouling paints is the only truly effective method for the protection of underwater structures from the development of fouling organisms. In the present study, the surface to volume concept constitutes the basis for the development of a new and improved method for determining the toxicity of antifouling paints on marine organisms. Particular emphasis is placed on the attainment of a standardized uniformity of coated surfaces. Failure to control the thickness of the coat of paint in previous studies of this type, has led to inaccurate evaluation of the relative toxicity of samples. Herein, an attempt is made to solve this problem using a simple technique which gives completely uniform and smooth surfaces. The effectiveness of this technique is assessed through two series of experiments using two different types of test containers: 50 ml modified syringes and 7 ml multiwells. The results of the toxicity experiments follow a normal distribution around the average value which allows to consider these values as reliable for comparison of the level of toxic effect detected with the two types of test containers. The mean lethal concentration L(S/V)(50) in the test series conducted in the multiwells (20.38 mm(2)ml(-1)) does not differ significantly from that obtained in the test series using modified syringes (20.065 mm(2)ml(-1)). It can thus be concluded from this preliminary study that the new method and the two different ways of exposing the test organisms to the antifouling paints and their leachates gave reliable and replicable results.     

Comparative environmental assessment of biocides used in antifouling paints

In response to increasing scientific evidence on the toxicity and persistence of organotin residues from antifouling paints in the aquatic environment, the use of triorganotin antifouling products was banned on boats of less than 25 m length in many countries during 1987. Alternatives to tributyltin (TBT) paint are mainly copper based coatings containing organic booster biocides to improve the efficacy of the formulation, and have been utilised on small boats for the last 10 years. With policies encouraging a total ban on TBT, it is expected that these biocides will be used to a greater extent in the future. Limited data and information are available on the environmental occurrence, fate, toxicity, and persistence of these biocides, and thus any decisions on policies regulating antifoulants cannot be fully informed. In this study, a multicriteria comparison of alternative biocides, based on a general assessment of available information in the literature, provided support for the use of the precautionary principle with respect to policies on antifouling products. This assessment was validated by a more detailed comparison of four selected biocides and TBT. Results indicate that TCMS pyridine and TCMTB demonstrate environmental characteristics similar to TBT and thus detail risk assessments are needed before their use is permitted. The widespread use of the other biocides should be allowed only after research to fill the gaps in knowledge with respect to their toxicity and persistence in aquatic environments.     

Monitoring of the booster biocide dichlofluanid in water and marine sediment of Greek marinas

Dichlofluanid (N-dichlorofluoromethylthio-N'-dimethyl-N-phenylsulphamide) is used as booster biocide in antifouling paints. The occurrence of dichlofluanid and its metabolite DMSA (N'-dimethyl-N-phenyl-sulphamide) was monitored in seawater and marine sediment from three Greek marinas. Seawater and sediment samples were collected at three representative positions and one suspected hotspot in each marina and shipped to the laboratory for chemical analysis. As part of the project, an analytical method had been developed and validated. Furthermore, some additional experiments were carried out to investigate the potential contribution of paint particle bound dichlofluanid on the total concentration in the sediment. As expected, given its known high hydrolytic degradation rate, no detectable concentrations of dichlofluanid were measured in any of the seawater samples. DMSA was detected in seawater samples at very low concentrations varying from <3 ng l(-1) (LOD) to 36 ng l(-1). During method validation, it had already been demonstrated that dichlofluanid is unstable in sediment and can therefore only be determined as its metabolite DMSA. In a separate experiment, in which marine sediment was spiked with artificial paint particles containing dichlofluanid and then analysed according to the validated method, it was demonstrated that if there is any dichlofluanid originating from paint particles, this would be determined as DMSA. No DMSA was detected in any of the sediment samples. It could therefore be concluded that there were no significant concentrations of dichlofluanid in the sediment samples.     

The effect of resuspending sediment contaminated with antifouling paint particles containing Irgarol 1051 on the marine macrophyte Ulva intestinalis

The effect of resuspending sediment contaminated with Irgarol 1051 based antifouling paint particles on the green macroalga Ulva intestinalis was examined. U. intestinalis was also exposed to sediment spiked with Irgarol 1051. The macroalga were exposed over 21 days to the resuspension of sediments containing 61.2 mg kg(-1) of antifouling paint particles containing Irgarol 1051 that provided aqueous Irgarol 1051 concentrations of approximately 0.3 microg l(-1), Irgarol 1051 and appropriate controls. The growth response was compared with that for 'clean' sediment. Resuspension of sediment was associated with reduced growth when compared to seawater alone. Resuspension of sediment spiked with Irgarol 1051 was associated with a greater reduction in growth, with growth being significantly reduced when sediment containing antifouling paint particles was resuspended. The data suggest that the prolonged disturbance of sediments containing antifouling paint particles in marinas represents a potential and as yet unquantified hazard to photosynthetic organisms.     

Increased persistence of antifouling paint biocides when associated with paint particles

Current regulatory risk assessment procedures only assess the impact of antifouling paint biocides that are released through leaching from a painted surface. Hull cleaning activities can lead to particles of antifouling paint containing biocides to enter the environment. Comparative pseudo-first order anaerobic degradation rate constants and half-lives were determined for a selection of common antifouling paint booster biocides, their degradation products, and associated with paint particles. Anaerobic half-lives of <0.5 days were calculated for chlorothalonil, dichlofluanid, and SeaNine 211, between 1 and 3 days for DCPMU and DCPU, between 14 and 35 days for diuron and CPDU, and over 226 days for GS26575 and Irgarol 1051. Increased persistence was observed when the compounds were introduced to sediments associated with antifouling paint particles. When present as antifouling paint particles, an increased half-life of 9.9 days for SeaNine 211 and 1.4 days was calculated for dichlofluanid, no significant degradation was observed for diuron. It is suspected that this is due to much of the biocide being initially bound within the matrix of the paint particle that is slowly released through dissolution processes into the sediment pore water prior to degradation. The release of booster biocides associated with paint particles into marinas has the potential to lead to their accumulation unless activities such as hull cleaning are strictly regulated.     

Risk assessment of biocides in roof paint

BACKGROUND, AIM AND SCOPE: Many surface coatings, including roof paints, contain biocides. It is generally not known to what extent roof paint biocides leach from the paint, and consequently, what concentration the biocide may attain in a rainwater collection system. To this end the leaching of specific biocides from a variety of German roof paints was investigated and the resulting concentrations in collected rain water were estimated. MATERIALS AND METHODS: A laboratory simulation was used to determine the time dependant leaching rate of the biocide from the paint into synthetic rainwater. The concentrations of biocide in the leachate were quantified using HPLC. The course of the leachate concentrations over time was fitted using a simple mathematical model. This was then used to estimate concentrations of biocides in a typical household rainwater collection system over time. RESULTS: Surprisingly, the biocides found in the paints did not always concur with the declared biocides. Concerning the modelling of runoff concentrations, it was found that--under the model assumptions--the rain intensity and cumulative raining time after application are the dominant factors influencing the concentration of the biocide. At the highest modelled rain intensity of 40 mm/hour it only takes about 2 hours to reach peak concentrations lower than 0.1 mg/L, at 0.3 mm/hour it takes about 10 hours to reach peak concentrations of 1.3, 0.9, 5.2 and 1.1 mg/L for terbutryn from Emalux paint, terbutryn from Südwest paint, carbendazim from Emalux paint, and carbendazim from MIPA paint, respectively. DISCUSSION: The results confirm that biocides leached from roof paint will be present in roof runoff. The highest estimated peak concentrations are close to the water solubility of the respective biocides. This indicates that the model assumption of a concentration independent leaching rate will tendentially lead to an overestimation of the leached concentrations under these circumstances. However, under most circumstances such as higher rain intensities, and longer time after peak concentrations have been reached, the runoff concentrations are far from the solubility limit, and therefore it is proposed that the model assumptions are tenable. CONCLUSIONS: The leaching of biocides from roof paints can be roughly assessed using a relatively simple approach. The declaration of biocidal ingredients in roof paints should be improved and information on their biocide leaching behaviour should be made available. Furthermore, the estimations should be evaluated by a field study. RECOMMENDATIONS AND PERSPECTIVES: The leaching study indicated that the concentrations of selected biocides can reach significant levels, especially after low intensity rainfall. Taking into account the inherent biological activity of the substances under scrutiny, it can already be concluded that it is not advisable to use runoff water from roofs freshly painted with biocide containing roof paints. These results have been complemented by a literature search of biological effects of the investigated biocides, ecotoxicological tests with several species and a risk analysis for organisms exposed to runoff water. This will be presented in Part 2 of this contribution.     

Toxicity of anti-fouling paints for use on ships and leisure boats to non-target organisms representing three trophic levels

Leachates of anti-fouling paints for use on ships and leisure boats are examined for their ecotoxicological potential. Paint leachates were produced in both 7‰ artificial (ASW) and natural seawater (NSW) and tested on three organisms, the bacterium Vibrio fischeri, the macroalga Ceramium tenuicorne, and the crustacean Nitocra spinipes. Generally, leaching in ASW produced a more toxic leachate and was up to 12 times more toxic to the organisms than was the corresponding NSW leachate. The toxicity could be explained by elevated concentrations of Cu and Zn in the ASW leachates. Of the NSW leachates, those from the ship paints were more toxic than those from leisure boat paints. The most toxic paint was the biocide-free leisure boat paint Micron Eco. This implies that substances other than added active agents (biocides) were responsible for the observed toxicity, which would not have been discovered without the use of biological tests.     

Source profiles of volatile organic compounds associated with solvent use in Beijing,China

Compositions of volatile organic compound (VOC) emissions from painting applications and printing processes were sampled and measured by gas chromatography–mass spectrometry/flame ionization detection (GC–MS/FID) in Beijing. Toluene and C8 aromatics were the most abundant species, accounting for 76% of the total VOCs emitted from paint applications. The major species in printing emissions included heavier alkanes and aromatics, such as n-nonane, n-decane, n-undecane, toluene, and m/p-xylene. Measurements of VOCs obtained from furniture paint emissions in 2003 and 2007 suggest a quick decline in benzene levels associated with formulation changes in furniture paints during these years. A comparison of VOC source profiles for painting and printing between Beijing and other parts of the world showed significant region-specific discrepancies, probably because of different market demands and environmental standards. We conducted the evaluation of the source reactivities for various VOC emission sources. The ozone formation potential (OFP) for unit mass of VOCs source emissions is the highest for paint applications. Substituting solvent-based paints by water-based in Beijing will lead to an OFP reduction of 152,000 tons per year, which is more than 1/4 of the OFPs for VOCs emissions from vehicle exhaust in the city.     

Mercury (Hg) and lead (Pb) in interior and exterior New Orleans house paint films

Pre-1992, latex paint was formulated with mercury (Hg) as phenylmercuric acetate (PMA). Hg vaporizes reducing its content, and lead (Pb) is stable and remains unchanged. The objective of this study is to describe the content of Hg and Pb in existing paint coatings. Forty paint chip samples were collected from both interior and exterior surfaces of homes in metropolitan New Orleans and analyzed for Hg and Pb. The median Hg in exterior paints is 26.9 mg kg(-1) (0.8-214.0) compared with 7.1 mg kg(-1) (0.03-39.2) for interior paints. The median Pb content is 76603 mg kg(-1) (464-317151) and 416 mg kg(-1) (24-63313) respectively, for exterior and interior paints. The Spearman correlation coefficients for Hg and Pb are -0.312 (P=0.13) and -0.471 (P=0.07) respectively, in exterior and interior samples. Hg and Pb vary independently with each other in paint films. Median Hg in exterior paints is four times larger than for interior paints. Median Pb in exterior paints is 184 times larger than interior paints. The Pb and Hg content in exterior and interior paint chips are significantly different (Mann-Whitney Rank Sum Test, P0.001 and P=0.006, respectively). Only 1 of the 25 exterior paints contained less than the current 5000 mg kg(-1) US standard for Pb, the criteria for exemption from the power-sanding restrictions of the New Orleans Lead Ordinance. Prior to banning PMA in paint, Hg poisonings presented as acrodynia were reported for children living in homes freshly painted with latex paint. Because of the affinity of Hg and Pb for sulfur-containing amino acid proteins, their presence in paint coatings poses an increased hazard when released as dust.     

Bioaccessibility of metals in soils and dusts contaminated by marine antifouling paint particles

Fragments of antifouling paint and environmental geosolids have been sampled from the island of Malta and analysed for total and bioaccessible metals. Total concentrations of Ba, Cd, Cu, Pb, Sn and Zn were two to three orders of magnitude higher in spent antifouling composites relative to respective values in background soils and road dusts. Paint fragments were visible in geosolids taken from the immediate vicinity of boat maintenance facilities and mass balance calculations, based on Ba as a paint tracer, suggested that the most contaminated soils, road dusts and boatyard dusts contained about 1%, 7% and 9%, respectively, of antifouling particles. Human bioaccessibilities of metals were evaluated in selected samples using a physiologically based extraction technique. Accessibilities of Cd, Cu, Pb and Zn in the most contaminated solids were sufficient to be cause for concern for individuals working in the boat repair industry and to the wider, local community.     

Organotins in North Sea brown shrimp (Crangon crangon L.) after implementation of the TBT ban

The organotin (OT) compounds tributyltin (TBT) and triphenyltin (TPhT) are potent biocides that have been used ubiquitously in antifouling paints and pesticides since the mid-1970s. These biocides are extremely toxic to marine life, particularly marine gastropod populations. The European Union therefore took measures to reduce the use of TBT-based antifouling paints on ships and ultimately banned these paints in 2003. Despite sufficient data on OT concentrations in marine gastropods, data are scarce for other species such as the North Sea brown shrimp (Crangon crangon), a dominant crustacean species in North Sea inshore benthic communities. The present study provides the first spatial overview of OT concentrations in North Sea brown shrimp. We have compared these data with historical concentrations in shrimp as well as with sediment concentrations. We have also addressed the effect on the shrimp stock and any human health risks associated with the OT concentrations found. TBT and TPhT in shrimp tail muscle ranged from 4 to 124 and from 1 to 24 μg kg⁻¹ DW, respectively. High levels are accumulated in estuarine areas and are clearly related with sediment concentrations (biota-sediment accumulation factor ∼10). Levels have decreased approximately 10-fold since the ban took effect, coinciding with a recovery of the shrimp stock after 30 years of gradual regression. Furthermore, the OT levels found in brown shrimp no longer present a human health risk.     

Coral skeletal tin and copper concentrations at Pohnpei, Micronesia: possible index for marine pollution by toxic anti-biofouling paints

We present 40 year-long skeletal chronologies of tin (Sn) and copper (Cu) from an annually-banded coral (Porites sp.) collected from Pohnpei Island, Micronesia (western equatorial Pacific). Both the elements are present in antifouling marine paints and are released inadvertently into ambient seawater. Especially, Sn has often been used in the form of tributyltin (TBT). Based on a stepwise pretreatment examination, Sn and Cu both inside and outside the aragonite lattice of the coral skeleton show a potential for providing marine pollution indicators. High values of extra-skeletal Cu/Ca and Sn/Ca atomic ratios were found between late 1960s and late 1980s during a period of active use of TBT-based antifouling paints worldwide. However, a significant decrease in both the ratios in the beginning of 1990s can be attributed to regulation of the use of TBT on cargo ships by countries such as the USA, Japan and Australia.     

Survey for the occurrence of antifouling paint booster biocides in the aquatic environment of Greece

Since the restriction imposed by European Union regulations on the use of TBT-based antifouling paints on boats below 25 m in length, new terms have been introduced in the 'small boat' market. Replacement products are generally based on copper metal oxides and organic biocides. Several studies have demonstrated the presence of these biocides in European ports and marinas of Spain, France, Germany and the United Kingdom. An extended survey of the antifouling biocides chlorothalonil, dichlofluanid, irgarol 1051 and sea-nine 211 was carried out in Greek ports and marinas of high boating activities from October 1999 to September 2000. The sampling sites were: Piraeus, Elefsina, Thessaloniki, Patras, Chalkida, Igoumenitsa, and Preveza (Aktio). The extraction of these compounds from the seawater samples was performed off-line with C18 solid phase extraction (SPE) disks while the determination was carried out with gas chromatography coupled to electron capture (ECD), thermionic (FTD) and mass spectroscopy (MS) detectors. The concentration levels of biocides were higher during the period from April to October. This seasonal impact depends on the application time of antifouling paints and mimic trends in the seasonal distribution of biocides in other European sites.     

Polymer coating of copper oxide nanoparticles increases nanoparticles uptake and toxicity in the green alga Chlamydomonas reinhardtii

Copper oxide nanoparticles (CuO NPs) are frequently used in a polymer-coated form, to be included in paints or fabrics for antimicrobial properties. Their application in antifouling paints may lead to the contamination of aquatic ecosystems. However, the toxicological risk of NPs in the environment is hard to evaluate due to a lack of knowledge on the mechanisms of NP interaction with biological systems. In this study, we investigated the effect of polymer coating on CuO NP toxicity in the green alga Chlamydomonas reinhardtii by comparing bare and polymer-coated CuO NPs prepared from the same CuO nanopowder. Both CuO NP suspensions were toxic to C. reinhardtii after 6 h treatment to concentrations of 0.005-0.04 g L⁻¹. Bare and polymer-coated CuO NPs induced a decrease of Photosystem II activity and the formation of reactive oxygen species. Polymer-coated CuO NP was found to be more toxic than the uncoated CuO NP. The higher toxicity of CS-CuO NP was mainly associated with the increased capacity of polymer-coated CuO NP to penetrate the cell compared to bare CuO NPs. These results indicates that the high toxicity of polymer-coated CuO NPs in algal cells results of intracellular interactions between NPs and the cellular system.     

Characterization of Emissions of Volatile Organic Compounds from Interior Alkyd Paint

ABSTRACT

Alkyd paint continues to be used indoors for application to wood trim, cabinet surfaces, and some kitchen and bathroom walls. Alkyd paint may represent a significant source of volatile organic compounds (VOCs) indoors because of the frequency of use and amount of surface painted. The U.S. Environmental Protection Agency (EPA) is conducting research to characterize VOC emissions from paint and to develop source emission models that can be used for exposure assessment and risk management. The technical approach for this research involves both analysis of the liquid paint to identify and quantify the VOC contents and dynamic small chamber emissions tests to characterize the VOC emissions after application. The predominant constituents of the primer and two alkyd paints selected for testing were straight-chain alkanes (C9–C12); C8–C9 aromatics were minor constituents. Branched chain alkanes were the predominant VOCs in a third paint. A series of tests were performed to evaluate factors that may affect emissions following application of the coatings. The type of substrate (glass, wallboard, or pine board) did not have a substantial impact on the emissions with respect to peak concentrations, the emissions profile, or the amount of VOC mass emitted from the paint. Peak concentrations of total volatile organic compounds (TVOCs) as high as 10,000 mg/m³ were measured during small chamber emissions tests at 0.5 air exchanges per hour (ACH). Over 90% of the VOCs were emitted from the primer and paints during the first 10 hr following application. Emissions were similar from paint applied to bare pine board, a primed board, or a board previously painted with the same paint. The impact of other variables, including film thickness, air velocity at the surface, and air-exchange rate (AER) were consistent with theoretical predictions for gas-phase, mass transfer-controlled emissions. In addition to the alkanes and aromatics, aldehydes were detected in the emissions during paint drying. Hexanal, the predominant aldehyde in the emissions, was not detected in the liquid paint and was apparently an oxidation product formed during drying. This paper summarizes the results of the product analyses and a series of small chamber emissions tests. It also describes the use of a mass balance approach to evaluate the impact of test variables and to assess the quality of the emissions data.     

Incorporating bioavailability into management limits for copper in sediments contaminated by antifouling paint used in aquaculture

Although now well embedded within many risk-based sediment quality guideline (SQG) frameworks, contaminant bioavailability is still often overlooked in assessment and management of contaminated sediments. To optimise management limits for metal contaminated sediments, we assess the appropriateness of a range methods for modifying SQGs based on bioavailability considerations. The impairment of reproduction of the amphipod, Melita plumulosa, and harpacticoid copepod, Nitocra spinipes, was assessed for sediments contaminated with copper from antifouling paint, located below aquaculture cages. The measurement of dilute acid-extractable copper (AE-Cu) was found to provide the most useful means for monitoring the risks posed by sediment copper and setting management limits. Acid-volatile sulfide was found to be ineffective as a SQG-modifying factor as these organisms live mostly at the more oxidised sediment water interface. SQGs normalised to %-silt/organic carbon were effective, but the benefits gained were too small to justify this approach. The effectiveness of SQGs based on AE-Cu was attributed to a small portion of the total copper being present in potentially bioavailable forms (typically <10% of the total). Much of the non-bioavailable form of copper was likely present as paint flakes in the form of copper (I) oxide, the active ingredient of the antifoulant formulation. While the concentrations of paint-associated copper are very high in some sediments, as the transformation of this form of copper to AE-Cu appears slow, monitoring and management limits should assess the more bioavailable AE-Cu forms, and further efforts be made to limit the release of paint particles into the environment.