Effect of electric arc furnace dust (EAFD) on properties of asphalt cement mixture

Electric arc furnace dust (EAFD) is one of the by-products of steelmaking industry which has been classified as hazardous due to containing some heavy metals such as Zinc, Cobalt, Copper, Lead or Cadmium. This research aims at solving the problem of this hazardous waste by solidification/stabilization through mixing it with asphalt cement to be used for road construction. EAFD was used as an additive to the asphalt concrete mixtures with five percentages (0%, 5%, 10%, 15% and 20%) by volume of binder. Penetration, ductility, specific gravity, softening point, flash point, fire point and rotational viscosity were analyzed. It was found that while the penetration and ductility were decreasing with the increase of EAFD concentration in the binder, specific gravity, softening point, flash point, fire point and rotational viscosity were increasing. Finally it has been concluded that the results are promising for dual achievement (1) to solve an environmental problem and (2) to use the EAFD for road construction.     

Overview of non-hazardous solid waste in the small island state of Mauritius

In Mauritius, solid waste disposal has been a cause for concern since the 1980s. Currently, there is no segregation of waste and some 1200 tonnes of solid waste are generated daily by the 1.24 million inhabitants of the island. As processes such as recycling and composting are still in their infancy stage, most of the waste generated have to be disposed of at the sole landfill. The solid waste management practices of 1980s and early 1990s are no longer compatible with the changing composition and quantity of wastes now generated. As a result, there is an urgency to review the whole waste management system and come forward with sustainable solutions.This paper presents an overview of the disposal of non-hazardous solid waste in Mauritius and provides recommendations for improving the current disposal system.     

Mix proportions and properties of CLSC made from thin film transition liquid crystal display optical waste glass

In this study, controlled low-strength concrete (CLSC) is mixed using different water-to-binder (W/B) ratios (1.1, 1.3 and 1.5) and various percentages of sand substituted by waste LCD glass sand (0%, 10%, 20% and 30%). The properties of the fresh concrete, including compressive strength, electrical resistivity, ultrasonic pulse velocity, permeability ratio and shrinking of the CLSC, are examined. Results show that increases in amount of waste glass added result in better slump and slump flow, longer initial setting time and smaller unit weight. Compressive strength decreases with increasing W/B ratio and greater amounts of waste glass added. Both electrical resistivity and ultrasonic pulse velocity increase with increases in amount of waste glass and decreases in W/B ratio. On the contrary, the permeability ratio increases with increases in W/B ratio, but decreases with greater amounts of waste glass added. CLSC specimens cured for different durations show little changes in length with shrinkage below 0.025%. Our findings reveal that CLSC mixed using waste LCD glass in place of sand can meet design requirements. Recycling of waste LCD glass not only offers an economical substitute for aggregates, but also an ecological alternative for waste management.     

Assessment of Cobalt-Rich Manganese Crusts in the Hawaiian, Johnston and Palmyra Islands' Exclusive Economic Zones

Cobalt-rich manganese crusts occurring within the 200 mile Exclusive Economic Zones (EEZs) of Pacific island nations may be of long-term strategic importance to the major industrialized nations and represent an important long-term development option for Pacific island nations.
A resource assessment methodology is described and used to estimate the resource potential of cobalt, copper, nickel and manganese within the EEZs of the Hawaiian Archipelago, Johnston and Palmyra Islands. Results of this study indicate a resource of roughly 10 million tons of cobalt, 6 million tons of nickel, 1 million tons of copper and 300 million tons of manganese within the study area.
Available data on manganese crusts and ocean bottom topography is inadequate for undertaking a full assessment of the resource potential of crusts within the EEZs of most Pacific island nations. Therefore it is recommended that to evaluate the potential of these nations a comprehensive research programme should be developed and implemented.     

Low energy buildings in Taiwan mountain areas: A weather data analysis

The energy consumption of buildings is influenced by the climates tremendously. Taiwan is an island covered with high mountains. Crossed by the tropic of cancer, the basic climates zones include tropical and subtropical climates. In this research, the degree day and degree hour methods were used to analyze 37 weather stations data in mid and high elevation regions of Taiwan collected over 10 years. The WRF model were used to predict summer cooling hours using 26, 28, 30°C as the base temperatures. The research showed that Taiwan has complicated climate zones due to the variations of the elevation. The low air-conditioning load areas in the mid and high elevation regions will be the most suitable areas to design low energy consumption buildings in Taiwan.     

Recycling of an industrial sludge and marine clay as light-weight aggregates

The geographical limitations of Singapore, its restricted natural resources and voluminous municipal and industrial waste streams, make environmental management a major challenge for the island state. In an attempt to find ways to reduce importation of raw materials and the waste sent to landfill, light weight aggregates were produced from marine clay and a CaF(2)-rich semiconductor industry sludge. Aggregates were produced in a bench-scale rotary kiln with three clay/sludge loadings (90/10, 70/30 and 50/50%). All three mixtures showed good bloating behavior during firing and the ceramic pellets (1-1.5cm diameter) had densities well below that required for light-weight aggregates. In the initial tests, the pore sizes of the aggregates were in general too large resulting in high water absorption. Comparisons between the composition of the two waste products and the aggregates showed a significant loss of fluorine (40-60%) during processing; a problem which may require flue gas treatment. Leach testing showed that the formed aggregates would not pose a human or environmental hazard in terms of fluorine mobilization.     

过滤捕集法处理含DEP雾废气的研究

为了探讨玻璃纤维过滤器处理含DEP雾废气的效率问题,在实验室进行了DEP雾去除实验。考查了不同气体入口浓度、过滤流速下玻璃纤维过滤捕集装置对含DEP雾废气的净化能力,结果表明:利用玻璃纤维过滤器去除DEP雾,在DEP雾粒径主要分布为0.48～3.4μm之间,DEP雾浓度小于220 mg/m3,过滤流速小于10 cm/s情况下,玻璃纤维过滤器对DEP雾的去除率大于99%,最大气体流量下的压力降小于1610Pa;同时对含油(酸)雾废气除雾效果好,特别是对于粒径特别细微的油(酸)雾,捕集效率也很高,还可回收利用,不会产生二次污染。     

Study on recycled asphalt concrete for use in surface course in airport pavement

This research investigated the possibility of using recycled asphalt concrete as surface course in airport pavement. The basic properties of recycled asphalt binder after short- and long-term aging were firstly tested and compared with those of the virgin asphalt. Then, a series of laboratory tests were performed to evaluate the performance of recycled asphalt concrete (containing 40% and 70% RAP), in which the HMA mixture without RAP was used as a control. Furthermore, an experimental pavement consisting of three sections (corresponding to 0%, 40% and 70% RAP content) was constructed to verify the laboratory test results. These results indicated that the recycled asphalt could achieve the similar properties against long-term aging as virgin asphalt. Recycled asphalt concrete containing 40% RAP could be used as surface course in airport pavement as it exhibited similar performance as control mixture both from the laboratory and experimental pavement test results. On the contrary, recycled asphalt concrete containing 70% RAP was not recommended as its fatigue property was much poorer compared with that of virgin asphalt mixture.     

Packaging waste measurement—A key element in digital's total quality program

Measurement of packaging waste is a key element of the Total Quality Management program at Digital Equipment Corporation. This case study shows how the company uses measurement techniques to set priorities for which areas of packaging waste should be addressed first and to track improvements over time. To date, an 1,800-ton annual reduction in packaging waste has been achieved, with associated annual savings of $2.7 million.     

Municipal solid waste management in China: Status,problems and challenges

This paper presents an examination of MSW generation and composition in China, providing an overview of the current state of MSW management, an analysis of existing problems in MSW collection, separation, recycling and disposal, and some suggestions for improving MSW systems in the future. In China, along with urbanization, population growth and industrialization, the quantity of municipal solid waste (MSW) generation has been increasing rapidly. The total MSW amount increased from 31.3 million tonnes in 1980 to 212 million tonnes in 2006, and the waste generation rate increased from 0.50 kg/capita/day in 1980 to 0.98 kg/capita/year in 2006. Currently, waste composition in China is dominated by a high organic and moisture content, since the concentration of kitchen waste in urban solid waste makes up the highest proportion (at approximately 60%) of the waste stream. The total amount of MSW collected and transported was 148 million tonnes in 2006, of which 91.4% was landfilled, 6.4% was incinerated and 2.2% was composted. The overall MSW treatment rate in China was approximately 62% in 2007. In 2007, there were 460 facilities, including 366 landfill sites, 17 composing plants, and 66 incineration plants. This paper also considers the challenges faced and opportunities for MSW management in China, and a number of recommendations are made aimed at improving the MSW management system.     

炼化企业热媒水低温余热回收利用方案

对典型炼化企业热媒水的温度、压力、流量及气分、伴热装置的蒸汽使用情况等进行调研,根据低温余热的利用原则,简化低温余热回收利用系统建立步骤,提出适合本企业、有针对性的低温余热回收利用方案。方案实施后,可为企业节省各类蒸汽3.6×105 t/a,年增加经济效益近4 000万元。     

沥青废气燃烧处理技术

在不同温度、不同沥青废气与天然气混合比及不同催化剂的条件下,用燃烧法对沥青熔化中产生的废气进行处理,研究其最佳处理效果,降低沥青废气排放浓度和废气中有害物质的浓度,解决了沥青废气严重污染环境的问题。     

Recycling for small island tourism developments: Food waste composting at Sandals Emerald Bay,Exuma, Bahamas

The ability for small islands to meet sustainability goals is exacerbated by the costs of transporting goods on, and then, wastes off the islands. At small scales, recycling can be prohibitive and complicated by labor costs; the need to profitably recycle and manage solid waste output from tourism is complicated by scale and available technologies. A multi-year study documents the amount of solid waste generated on Great Exuma (Exuma), The Commonwealth of The Bahamas since 2010 with one year of benchmarking, then limited recycling of food waste generation by an all-inclusive resort, Sandals Emerald Bay (SEB). For the island of Exuma, the rapid increase in the rate of accumulation of solid waste associated with a large destination resort has led to an increase in pests such as rats and flies, along with an increased occurrence of fires associated with unburied solid waste. Solid waste has accumulated faster than the island solid waste management can absorb. SEB kitchen and hotel operations contributes an estimated 36% of all solid waste generated on the island, about 1752 t¹ out of a total of 4841 t generated on the island in 2013 (exclusive of vegetation waste). Based on 4 weeks of benchmarking, 48.5% of all the waste coming out of the SEB resort is compostable, organic waste, but waste composition varies widely over time. Exuma Waste Management (EWM) and Recycle Exuma (RE), both privately-held Bahamian businesses, worked for one year (2012–2013) with SEB resort to implement a benchmarking and pilot recycling project to meet Earth Check green resort certification requirements. This paper outlines the costs and resources required for food waste recycling and some barriers to implementing more effective solid waste management for the tourism industry on small islands.     

Refuse-derived fuel as a secondary energy in Taiwan—Using Hotelling space allocation model

Most Taiwanese farmers usually blend rice straws into the soil after harvest. However, rice straws possess great thermal energy, which can be used to produce refuse-derived fuel (RDF-5). As Taiwan faces energy shortage, the development benefits of the RDF-5 industry are tempting. This study employs the Hotelling model to design the locations and the optimal numbers of RDF-5 plants. From the technology and material supply point of view, turning waste rice straws into RDF-5 is feasible in Taiwan. Nevertheless, from the business operation perspective, even if the RDF-5 plant is willing to lower its profit rate, its selling price is still hard to compete with imported RDF-5. If the Taiwanese government decides to pursue RDF-5 as an alternative energy, they might need to take a step further to subsidize entrepreneurs or provide appropriate tax benefits. Otherwise, the RDF-5 industry is hard to survive in Taiwan.     

Health-care waste management in India.

Health-care waste management in India is receiving greater attention due to recent regulations (the Biomedical Wastes (Management & Handling) Rules, 1998). The prevailing situation is analysed covering various issues like quantities and proportion of different constituents of wastes, handling, treatment and disposal methods in various health-care units (HCUs). The waste generation rate ranges between 0.5 and 2.0 kg bed-1 day-1. It is estimated that annually about 0.33 million tonnes of waste are generated in India. The solid waste from the hospitals consists of bandages, linen and other infectious waste (30-35%), plastics (7-10%), disposable syringes (0.3-0.5%), glass (3-5%) and other general wastes including food (40-45%). In general, the wastes are collected in a mixed form, transported and disposed of along with municipal solid wastes. At many places, authorities are failing to install appropriate systems for a variety of reasons, such as non-availability of appropriate technologies, inadequate financial resources and absence of professional training on waste management. Hazards associated with health-care waste management and shortcomings in the existing system are identified. The rules for management and handling of biomedical wastes are summarised, giving the categories of different wastes, suggested storage containers including colour-coding and treatment options. Existing and proposed systems of health-care waste management are described. A waste-management plan for health-care establishments is also proposed, which includes institutional arrangements, appropriate technologies, operational plans, financial management and the drawing up of appropriate staff training programmes.     

The availability of primary nickel from the market economy countries

The US Bureau of Mines has determined the potential availability of nickel from 36 deposits or districts in 16 market economy countries (MECs). More than 95% of production in MECs was analysed. The study indicates the quantity of nickel available in resources and potential annual production at net production costs and on a total cost basis with a 0% and a 10% discounted cash flow rate of return (DCFROR). The properties included in this study contain approximately 33 million tonnes of recoverable nickel. About 26 million tonnes of nickel is potentially recoverable from nickel laterite deposits, of which 4.5 million tonnes can be produced at $2.50/lb or less with a 0% DCFROR. Approximately 7 million tonnes of nickel is potentially recoverable from nickel sulphide deposits of which about 6.3 million tonnes could be produced at $2.50/lb or less at a 0% DCFROR. Sensitivity studies indicate that the total cost of producing nickel from laterite deposits is most sensitive to increases in energy costs, and that the total costs of producing nickel from sulphide deposits is most sensitive to increases in labour costs and by changes in byproduct revenues.     

Modeling materials flow of waste concrete from construction and demolition wastes in Taiwan

Material flows of concrete from construction and demolition (C&D) waste in Taiwan have grown considerably over the last two decades, Hsiao et al. (2001). This increased flow puts pressure on limited national disposal capacity and has indirectly caused ecological damage to domestic riparian zones used as sources of natural aggregate. Using existing statistics and literature sources for C&D waste generation in Taiwan we have developed a dynamic model of domestic material flows of concrete waste and employ statistical analyses to obtain projections of future material flows. Our major findings are: (1) Taiwan’s rate of waste concrete generation in 2001 for the residential and commercial construction industry was approximately 2.4 Million Metric Tons (MMT) per year, averaging 0.11 metric tons of waste concrete generated annually by each Taiwanese; (2) Around the year 2009, the national rate will more than triple to exceed the spike in C&D concrete waste generation that occurred after the Chi Chi earthquake 9/21/99, 8.5 MMT. (3) Aside from pilot-scale development of waste concrete utilization technology, nationwide recycling rates remain negligible. Without resource recovery, the volume of C&D waste generation by 2009 is projected to occupy nearly 7% of all existing and planned domestic landfill capacity. A target is established to raise resource recovery rates for waste concrete to 50% by 2005 and a 100% nationwide recycling rate by 2009.     

Carbon storage potential in natural fiber composites

The environmental performance of hemp based natural fiber mat thermoplastic (NMT) has been evaluated in this study by quantifying carbon storage potential and CO₂ emissions and comparing the results with commercially available glass fiber composites. Non-woven mats of hemp fiber and polypropylene matrix were used to make NMT samples by film-stacking method without using any binder aid. The results showed that hemp based NMT have compatible or even better strength properties as compared to conventional flax based thermoplastics. A value of 63 MPa for flexural strength is achieved at 64% fiber content by weight. Similarly, impact energy values (84–154 J/m) are also promising. The carbon sequestration and storage by hemp crop through photosynthesis is estimated by quantifying dry biomass of fibers based on one metric ton of NMT. A value of 325 kg carbon per metric ton of hemp based composite is estimated which can be stored by the product during its useful life. An extra 22% carbon storage can be achieved by increasing the compression ratio by 13% while maintaining same flexural strength. Further, net carbon sequestration by industrial hemp crop is estimated as 0.67 ton/h/year, which is compatible to all USA urban trees and very close to naturally, regenerated forests. A comparative life cycle analysis focused on non-renewable energy consumption of natural and glass fiber composites shows that a net saving of 50 000 MJ (3 ton CO₂ emissions) per ton of thermoplastic can be achieved by replacing 30% glass fiber reinforcement with 65% hemp fiber. It is further estimated that 3.07 million ton CO₂ emissions (4.3% of total USA industrial emissions) and 1.19 million m³ crude oil (1.0% of total Canadian oil consumption) can be saved by substituting 50% fiber glass plastics with natural fiber composites in North American auto applications. However, to compete with glass fiber effectively, further research is needed to improve natural fiber processing, interfacial bonding and control moisture sensitivity in longer run.     

A model recycling program for Alabama

Solid waste disposal is becoming a difficult problem for many states. Since 1960, the amount of municipal solid waste (MSW) has been increasing at a rate of 1% per year. More than 75% of the waste is comprised of recyclable materials. Several states have mandated recycling to decrease the volume of waste intended for disposal. Those mandated programs are very popular, but depend on many political, social, and economic factors for success. While Alabama has the manufacturing infrastructure to support a mandated recycling program, no recycling legislation has been promulgated. At this time recycling is only being done on a voluntary basis. A mandatory program with the proper support, education and funding could allow Alabama to recycle much of the 5.2 million tons of waste that are generated within its borders each year.     

建筑废弃物再生利用的可行性技术研究综述

建材行业的发展为城市化建设提供了重要保障,在我国城市化快速发展、建筑材料需求旺盛的带动下,建材行业发展强劲,但大多属于高能耗高污染行业,加之城市拆迁改造产生大量建筑废弃物,环境压力十分巨大,必须加强建筑废弃物的环境管理。对建筑废弃物再利用、再循环以及减少建筑废弃物是解决建筑行业环境问题的重要方式,实施这些仍有很大的提升空间。本文回顾了近年来建筑废弃物再生利用方面的各种可行性技术。主要是针对沥青、砖、混凝土、金属、玻璃等几种物质再生利用的可行性技术进行综述,为未来建筑废弃物再生利用领域提供参考。