共查询到20条相似文献，搜索用时 0 毫秒
1.
AbstractObjective: The objective of this study was to examine the influence of bicycle design and speed on the head impact when suffering from a single-bicycle crash, and the possibility to study this using crash tests. Methods: Simulations of single-bicycle crashes were performed in the VTI crash safety laboratory. Two bicycle crash scenarios were simulated: “a sudden stop” and “sideways dislocation of the front wheel”; using four different bicycle types: a “lady’s bicycle”, a commuter bicycle, a recumbent bicycle and a pedelec; at two speeds: 15 and 25?km/h. In addition, sideway falls were performed with the bicycles standing still. All tests were done with a Hybrid II 50 th percentile crash test dummy placed in the saddle of the bicycles, with acceleration measurements in the head. Results: The crash tests showed that a sudden stop, e.g. a stick or bag in the front wheel, will result in a falling motion over the handle bars causing a forceful head impact while a sideways dislocation of the front wheel will result in a falling motion to the side causing a more moderate head impact. The falling motion varies between the different bicycle types depending on crash test scenario and speed. The pedelec had a clearly different falling motion from the other bicycle types, especially at a sudden stop. Conclusions: The study implies that it is possible to examine single-bicycle crashes using crash tests, even though the setup is sensitive to minor input differences and the random variation in the resulting head impact values can be large. Sideway falls with the bicycles standing still were easier to perform with a good repeatability and indicated an influence of seating height on the head impact. 相似文献
2.
Objective: Distinguished from the traditional perspectives in crash analyses, which examined the effects of geometric design features, traffic factors, and other relevant attributes on the crash frequencies of roadway entities, our study focuses on exploring the effects of highway safety laws, as well as sociocultural characteristics, on fatal crashes across states. Methods: Law and regulation related data were collected from the Insurance Institute for Highway Safety, State Highway Safety Offices, and Governors Highway Safety Association. A variety of sociodemographic characteristics were obtained from the U.S. Census Bureau. In addition, cultural factors and other attributes from a variety of resources are considered and incorporated in the modeling process. These data and fatal crash counts were collected for the 50 U.S. states and the District of Columbia and were analyzed using zero-truncated negative binomial (ZTNB) regression models. Results: The results show that, in law and regulation–related factors, the use of speed cameras, no handheld cell phone ban, limited handheld cell phone ban, and no text messaging ban are found to have significant effects on fatal crashes. Regarding sociocultural characteristics, married couples with both husband and wife in the labor force are found to be associated with lower crash frequencies, the ratios of workers traveling to work by carpool, those driving alone, workers working outside the county of residence, language other than English and limited English fluency, and the number of licensed drivers are found to be associated with higher crash frequencies. Conclusions: Through reviewing and modeling existing state highway safety laws and sociocultural characteristics, the results reveal new insights that could influence policy making. In addition, the results would benefit amending existing laws and regulations and provide testimony about highway safety issues before lawmakers consider new legislation. 相似文献
3.
Objective: Traffic fatalities in Brazil still rank among the highest worldwide, with an overall rate of 23.4 deaths/100,000 inhabitants/year. Although alcohol and drug use play an important role in traffic accidents, national data about their relative influence are scarce. Drug screening is not routinely performed by traffic agents because alcohol is the only substance regularly investigated in roadblocks. Therefore, we aimed to describe the initial traffic agent user experience for 4 handheld point-of-collection oral fluid drug testing devices used in routine roadblocks in Brazil, focusing on usage perceptions in hopes of generalizing this approach for other developing countries. Methods: Four different oral fluid collection devices were evaluated: The DDS2, the DOA MultiScreen, the Dräger DrugTest 5000, and the Multi-Drug Multi-Line Twist Screen Device. Fourteen trained traffic agents obtained oral fluid from 164 drivers and performed 37 qualitative evaluations of the devices. Traffic agents filled out a questionnaire focusing on 9 feasibility criteria: Overall simplicity for roadside operation; operational success; saliva sample collection time; sample analysis time; ease of sample preparation and analysis; agreement with observed clinical signs; overall hygiene and safety; sufficient operating instructions; and hygiene of saliva collection. These were weighted based on an expert panel and yielded an overall composite device experience score that ranged from 1 (poor) to 100 (excellent). Results: Ease of use, operational success, and acceptable collection and analysis time were considered the most important criteria by the expert panel. The results ranged from 27.3 to 88.9% for simplicity of use; 45.5 to 100.0% for operational success; 27.3 to 100% for acceptable collection time; and 36.4 to 100.0% for acceptable analysis time. The final device scores, based on the agents’ user experiences, ranked as follows: DOA MultiScreen: 49.3/100; Dräger DrugTest 5000: 82.4/100; Multi-Drug Multi-Line Twist Screen Device: 84.3/100; DDS2: 88.4/100. Conclusion: Based on the selected criteria, 3 of the 4 devices were considered useful by traffic agents in routine roadblock operations. The weighted evaluations suggest that their ease of use (handling, sampling analysis, and reliability), as well as their agreement with findings obtained by other means, defined their utility to traffic agents, although such appraisals must be further analyzed in future studies. 相似文献
4.
IntroductionHighway crash occurrence is a leading cause of unnatural deaths, and highway agencies continually seek to identify engineering measures to reduce crashes and to assess the efficacy of such measures. Most past studies on the effectiveness of roadway improvements in terms of crash reduction considered all rural two-lane sections as a single category of roads. However, it may be hypothesized that the differences in the mobility and accessibility characteristics that are reflected in (and due to) the different design standards between different functional subclasses in the rural two-lane highway system can lead to differences in efficacies of safety improvements at these subclasses. This paper investigates the efficacy of roadway improvements, in terms of crash reduction, at the various subclasses of rural two-lane highways. MethodsAn empirical analysis of safety performance at each of the three subclasses of rural two-lane highways was carried out using the negative binomial modeling technique. For each subclass, crash prediction models were developed separately for the three levels of crash severity: property-damage only, injury, and fatal/injury. The crash factors that were considered include lane width, shoulder width, pavement surface friction, pavement condition, and horizontal and vertical alignments. After having developed the safety performance functions, the effectiveness (in terms of the extent of crash reduction, for different levels of crash severity) of highway safety enhancements at each highway subclass were determined using the theoretical concepts established in past literature. These enhancements include widening lanes, widening shoulders, enhancing pavement surface friction, and improving the vertical or horizontal alignment. Results and ConclusionThe study found that there is empirical evidence to justify the decomposition of the family of rural two-lane roads into its constituent subclasses for purposes of analyzing the effectiveness of safety enhancement projects and thus to avoid underestimation or overestimation of benefits of safety improvements at this class of highways. 相似文献
5.
Objectives: An airbag system for motorcycle applications was developed and marketed in 2006 followed by many research projects on the system. In the airbag system, the bag should be supported during the kinetic energy–absorbing period of a rider in a collision. The previously developed system employed a configuration in which motorcycle structures support the airbag, such as a gauge unit and/or a steering structure. The supporting structure functions to receive the reaction force to hold the airbag during a crash to properly absorb the rider's kinetic energy. However, the previous system requires a larger area for this reaction structure and is applicable only to the motorcycles that can provide that area. To overcome this limitation, we propose an airbag system employing another concept. In this concept, the airbag does not use its vehicle structures as a reaction structure but uses the structures of an opposing vehicle, such as doors and/or pillars of an opposing vehicle. In this project, we aim to verify the effectiveness of the proposed system when installed in a motorcycle that cannot provide a larger area for the reaction structure. Methods: In the system with this concept, it is assumed that the occupant protection performance is largely affected depending on impact configurations. Accordingly, full-scale motorcycle-to-car crash tests using 125 cm 3 scooter-type models with and without the proposed system were conducted in various impact configurations. The 7 impact configurations specified in ISO 13232 were selected as the test configurations. Injury variables and injury indices of head, neck, chest, and abdomen were evaluated with the motorcyclist dummy. Results: Injury variables and indices obtained from the crash tests with the airbag were compared to those of the baseline tests. In 2 impact configurations, the airbags were supported by the side structures of the opposing vehicle and performed to reduce the injury variable of head and/or chest compared to that of the baseline test. Conclusion: Through the crash tests, beneficial protection effects of the airbag system were confirmed in particular impact configurations. No significant risk for the occupant due to the airbag was observed in the conducted crash tests. It was concluded that the proposed airbag system has feasibility to reduce rider injury in a collision of a motorcycle without sufficient reaction structure. 相似文献
6.
为了建立汽车及公路护栏组成的复杂系统的耐撞性分析模型,基于VPG与LS-DYNA软件平台,应用标准化建模方法,即通过设定建模原则,在充分利用VPG内置的标准模型数据库如悬挂、轮胎、假人、安全带等各种模型的基础上,采用分块建模法,分别建立汽车、护栏、座椅模型,定义好各自内部的接触;并利用VPG的\"export\"功能,生成各自的DYN文件;再利用生成的DYN文件,就可组合出汽车-护栏系统耐撞性研究的各种中间环节的有限元模型,最终实现\"汽车-护栏-乘员-座椅-安全带\"系统模型的一体化.仿真分析与试验结果的对比表明,笔者建立的模型具有足够的可信度,适合工程应用,并给出了一个应用示例. 相似文献
7.
IntroductionA common contention is that the construction of highway bypasses negatively impacts the economy of local communities by reducing pass-by traffic for businesses. However, as access to specific business' account records is limited, this impact is difficult to quantify. Another common contention is that bypasses contribute to a reduction in overall crashes in the community and in the surrounding areas. Even though a large number of bypasses have been constructed in the State of Iowa over the past several years, their actual impact in terms of traffic safety has not been quantified. ObjectivesThis study seeks answers to the following questions: (a) Are bypasses in Iowa associated with a reduction in crash frequencies and crash rates on the bypassed highway? (b) Do bypasses in Iowa introduce a reduction of overall crash frequencies and rates or do they merely shift crashes from the highways through the communities to the bypasses with no significant overall reduction? MethodWe obtained crash information from the Iowa DOT at 19 sites on which a bypass was constructed sometime during the past 23 years. We also obtained the same information at six sites used as comparison sites on which no bypasses were constructed at least until 2005. We them employed a Bayesian approach to estimating the association between the construction of the bypass and crash rates, while also accounting for other factors. ResultsThe construction of bypasses in Iowa is associated with a significant increase in traffic safety both on the main road through town and on the combined main road and bypass roadway. 相似文献
8.
Objective: Several studies have evaluated the correlation between U.S. or Euro New Car Assessment Program (NCAP) ratings and injury risk to front seat occupants, in particular driver injuries. Conversely, little is known about whether NCAP 5-star ratings predict real-world risk of injury to restrained rear seat occupants. The NHTSA has identified rear seat occupant protection as a specific area under consideration for improvements to its NCAP. In order to inform NHTSA's efforts, we examined how NCAP's current 5-star rating system predicts risk of moderate or greater injury among restrained rear seat occupants in real-world crashes. Methods: We identified crash-involved vehicles, model year 2004–2013, in NASS-CDS (2003–2012) with known make and model and nonmissing occupant information. We manually matched these vehicles to their NCAP star ratings using data on make, model, model year, body type, and other identifying information. The resultant linked NASS-CDS and NCAP database was analyzed to examine associations between vehicle ratings and rear seat occupant injury risk; risk to front seat occupants was also estimated for comparison. Data were limited to restrained occupants and occupant injuries were defined as any injury with a maximum Abbreviated Injury Scale (AIS) score of 2 or greater. Results: We linked 95% of vehicles in NASS-CDS to a specific vehicle in NCAP. The 18,218 vehicles represented an estimated 6 million vehicles with over 9 million occupants. Rear seat passengers accounted for 12.4% of restrained occupants. The risk of injury in all crashes for restrained rear seat occupants was lower in vehicles with a 5-star driver rating in frontal impact tests (1.4%) than with 4 or fewer stars (2.6%, P =.015); results were similar for the frontal impact passenger rating (1.3% vs. 2.4%, P =.024). Conversely, side impact driver and passenger crash tests were not associated with rear seat occupant injury risk (driver test: 1.7% for 5-star vs. 1.8% for 1–4 stars; passenger test: 1.6% for 5 stars vs 1.8% for 1–4 stars). Conclusions: Current frontal impact test procedures provide some degree of discrimination in real-world rear seat injury risk among vehicles with 5 compared to fewer than 5 stars. However, there is no evidence that vehicles with a 5-star side impact passenger rating, which is the only crash test procedure to include an anthropomorphic test dummy (ATD) in the rear, demonstrate lower risks of injury in the rear than vehicles with fewer than 5 stars. These results support prioritizing modifications to the NCAP program that specifically evaluate rear seat injury risk to restrained occupants of all ages. 相似文献
9.
Objective: The goal of this study was to evaluate how well an in-laboratory rollover crash test methodology that constrains vehicle motion can reproduce the dynamics of unconstrained full-scale steering-induced rollover crash tests in sand. Methods: Data from previously-published unconstrained steering-induced rollover crash tests using a full-size pickup and mid-sized sedan were analyzed to determine vehicle-to-ground impact conditions and kinematic response of the vehicles throughout the tests. Then, a pair of replicate vehicles were prepared to match the inertial properties of the steering-induced test vehicles and configured to record dynamic roof structure deformations and kinematic response. Results: Both vehicles experienced greater increases in roll-axis angular velocities in the unconstrained tests than in the constrained tests; however, the increases that occurred during the trailing side roof interaction were nearly identical between tests for both vehicles. Both vehicles experienced linear accelerations in the constrained tests that were similar to those in the unconstrained tests, but the pickup, in particular, had accelerations that were matched in magnitude, timing, and duration very closely between the two test types. Deformations in the truck test were higher in the constrained than the unconstrained, and deformations in the sedan were greater in the unconstrained than the constrained as a result of constraints of the test fixture, and differences in impact velocity for the trailing side. Conclusions: The results of the current study suggest that in-laboratory rollover tests can be used to simulate the injury-causing portions of unconstrained rollover crashes. To date, such a demonstration has not yet been published in the open literature. This study did, however, show that road surface can affect vehicle response in a way that may not be able to be mimicked in the laboratory. Lastly, this study showed that configuring the in-laboratory tests to match the leading-side touchdown conditions could result in differences in the trailing side impact conditions. 相似文献
10.
从石油井架风灾害分析人手,客观分析了油田在役钻机井架不能正常工作或倾倒的根本原因。基于相似理论和基本假设,建立了石油井架计算机有限元模型,进行了结构有限元分析,并以JJ160／41-K型井架为例进行了现场实测。结果表明,基于有限元理论建立的石油井架安全检测与评价技术,能够满足当前石油勘探开发对在役石油钻机井架安全评价的基本需要。 相似文献
11.
Risk compensation denotes offsetting behavioral responses to safety improvements. Theoretical arguments suggest that, when drivers are required to drive safer cars or drive in a safer manner, they will tend to increase their driving speed or drive in some other risky manner. The purpose of this paper is to review critically the theory and evidence on risk compensation. Our general conclusion is that the application of risk compensation theory, especially to some types of regulations, is questionable, and the empirical support for significant offsetting behavior is weak. Specifically—(1) the role of limitations in processing information is not appreciated, especially regarding risk perceptions and the learning component associated with new regulations; (2) the types of regulations and types of driving behavior are not adequately distinguished; and (3) the empirical studies haves mixed results and are subject to important limitations. 相似文献
12.
为探索适合我国的事故数据深度采集标准,并分析城市道路交通事故特征及致因,基于《道路交通事故深度调查信息采集表》(简称采集表),调查人员随交警赴事故现场随机详细调查87起城市道路交通事故.借鉴“Haddon Matrix”思想建立致因分析矩阵系统,分析事故的致因.发现采集表对事故地点、事故形态及原因项分类更加具体、明确,女性驾驶员的事故发生率略低于男性驾驶员,驾驶员年龄超过60岁后,发生事故的危险性显著提高,“交叉口影响区”事故50％由变更车道引起,非机动车驾驶员未戴安全头盔是造成严重伤害的重要原因. 相似文献
13.
Objective: This study aimed to explore the relationship between crash types and different freeway segments and identify the factors contributing to crashes on different freeway segments. Unlike most of the previous studies on freeway segments, this study separately investigates basic freeway segments, single ramp influence segments, and multiple ramp influence segments. Methods: Nonlinear canonical correlation analysis (NLCCA) and proportionality test were used to identify the relationship between crash types and different freeway segments. The data sets for the different freeway segments accumulated for this study consist of 9,867 crash samples with complete information on all 22 chosen variables. A multinomial logit model (MNL) was used to estimate the influence of crash factors on different freeway segments. Results: The results show that weaving and diverge overlap influence segments (WD) are more likely to have injury or fatal crashes; diverge and diverge overlap influence segments (DD) are more likely to have property damage–only (PDO) crashes; merge and merge overlap influence segments (MM) are more likely to have sideswipe crashes; and WD have non-sideswipe crashes; WD and weaving overlap influence segments (MW) are more likely to have rear end crashes; and MM segments are less likely to have hit object crashes. The contributing factors are identified by MNL and the results show that different traffic variables, environmental variables, vehicle variables, driver variables, and geometric variables significantly affected the likelihood of crashes on different freeway segments. Conclusions: Investigation of crash types and factors contributing to crashes on different freeway segments is based on multiple ramp influence segments, which can promote a better understanding of the safety performance of various freeway segments. 相似文献
14.
ProblemPrevious research indicated that conversions of intersections into roundabouts appear to increase the number of injury crashes with bicyclists. However, it was assumed that the effectiveness of roundabouts could vary according to some differences in design types of cycle, facilities and other geometrical factors. MethodRegression analyses on effectiveness-indices resulting from a before-and-after study of injury crashes with bicyclists at 90 roundabouts in Flanders, Belgium. ResultsRegarding all injury crashes with bicyclists, roundabouts with cycle lanes appear to perform significantly worse compared to three other design types (mixed traffic, separate cycle paths, and grade-separated cycle paths). Nevertheless, an increase of the severest crashes was noticed, regardless of the design type of the cycle facilities. Roundabouts that are replacing signal-controlled intersections seem to have had a worse evolution compared to roundabouts on other types of intersections. Impact on industryThe results might affect design guidelines for roundabouts, particularly for the accommodation of bicyclists. 相似文献
15.
Objective: Vehicle safety rating systems aim firstly to inform consumers about safe vehicle choices and, secondly, to encourage vehicle manufacturers to aspire to safer levels of vehicle performance. Primary rating systems (that measure the ability of a vehicle to assist the driver in avoiding crashes) have not been developed for a variety of reasons, mainly associated with the difficult task of disassociating driver behavior and vehicle exposure characteristics from the estimation of crash involvement risk specific to a given vehicle. The aim of the current study was to explore different approaches to primary safety estimation, identifying which approaches (if any) may be most valid and most practical, given typical data that may be available for producing ratings. Methods: Data analyzed consisted of crash data and motor vehicle registration data for the period 2003 to 2012: 21,643,864 observations (representing vehicle-years) and 135,578 crashed vehicles. Various logistic models were tested as a means to estimate primary safety: Conditional models (conditioning on the vehicle owner over all vehicles owned); full models not conditioned on the owner, with all available owner and vehicle data; reduced models with few variables; induced exposure models; and models that synthesised elements from the latter two models. Results: It was found that excluding young drivers (aged 25 and under) from all primary safety estimates attenuated some high risks estimated for make/model combinations favored by young people. The conditional model had clear biases that made it unsuitable. Estimates from a reduced model based just on crash rates per year (but including an owner location variable) produced estimates that were generally similar to the full model, although there was more spread in the estimates. The best replication of the full model estimates was generated by a synthesis of the reduced model and an induced exposure model. Conclusions: This study compared approaches to estimating primary safety that could mimic an analysis based on a very rich data set, using variables that are commonly available when registered fleet data are linked to crash data. This exploratory study has highlighted promising avenues for developing primary safety rating systems for vehicle makes and models. 相似文献
16.
Objective: Motorcycle riders are involved in significantly more crashes per kilometer driven than passenger car drivers. Nonetheless, the development and implementation of motorcycle safety systems lags far behind that of passenger cars. This research addresses the identification of the most effective motorcycle safety solutions in the context of different countries. Methods: A knowledge-based system of motorcycle safety (KBMS) was developed to assess the potential for various safety solutions to mitigate or avoid motorcycle crashes. First, a set of 26 common crash scenarios was identified from the analysis of multiple crash databases. Second, the relative effectiveness of 10 safety solutions was assessed for the 26 crash scenarios by a panel of experts. Third, relevant information about crashes was used to weigh the importance of each crash scenario in the region studied. The KBMS method was applied with an Italian database, with a total of more than 1 million motorcycle crashes in the period 2000–2012. Results: When applied to the Italian context, the KBMS suggested that automatic systems designed to compensate for riders' or drivers' errors of commission or omission are the potentially most effective safety solution. The KBMS method showed an effective way to compare the potential of various safety solutions, through a scored list with the expected effectiveness of each safety solution for the region to which the crash data belong. A comparison of our results with a previous study that attempted a systematic prioritization of safety systems for motorcycles (PISa project) showed an encouraging agreement. Conclusions: Current results revealed that automatic systems have the greatest potential to improve motorcycle safety. Accumulating and encoding expertise in crash analysis from a range of disciplines into a scalable and reusable analytical tool, as proposed with the use of KBMS, has the potential to guide research and development of effective safety systems. As the expert assessment of the crash scenarios is decoupled from the regional crash database, the expert assessment may be reutilized, thereby allowing rapid reanalysis when new crash data become available. In addition, the KBMS methodology has potential application to injury forecasting, driver/rider training strategies, and redesign of existing road infrastructure. 相似文献
17.
Objective: The aim of the study was to compare the safety effects of studded and unstudded winter tires based on fatal road accidents. Methods: The data included 958 road accidents involving a passenger car or van that occurred in Finland from November to March between 1997 and 2012. Results: Comparing the proportions of winter tire type in accidents and in general traffic showed that the overall effect of tire type on the number of accidents was not significant, although studded tires reduced fatal accidents by 10–15%. Compared to unstudded tires, studded tires reduced accidents significantly only on bald ice in 2005–2012. Drivers using unstudded tires were more experienced and their profession was more frequently related to driving. In addition, the vehicle age was lower for vehicles with unstudded tires. On the other hand, the state of repair was less pertinent for unstudded than for studded tires. These confounding factors offset their effects to some degree. Conclusions: The risk of fatal road accidents in winter between studded and unstudded tires does not differ significantly. However, the accident risk has recently been substantially higher on bald ice for unstudded than for studded tires. The magnitude of this risk difference is difficult to determine without specific information on exposure by road surface. 相似文献
18.
Objective: The Lower Anchor and Tethers for CHildren (LATCH) system was introduced in vehicles made after September 1, 2002 and intended to make installation of rear and forward-facing child safety seats easier. Due to the lack of rear impact testing of RFCRS required per the Federal Motor Vehicle Safety Standards (FMVSS), the purpose of this study was to explore the effects, if any, of installation method of RFCRS on the performance of commonly purchased makes and models of RFCRS. Specifically, we hypothesize that in a 48 km/h (29.8 MPH) rear-end collision, installation of RFCRS using the LATCH system will result in higher Head Injury Criteria (HIC) values when compared to using the available lap/shoulder seatbelt (Emergency Locking Retractor - ELR or Automatic Locking Retractor - ALR). Methods: The test matrix included 36 rear impact sled tests conducted using 3 installation methods on 3 models of RFCRS: the Graco SnugRide® with and without the base, the Britax Chaperone with base-mounted anti-rebound bar, and the Evenflo Tribute®, a model of convertible rearward/forward facing restraint system used in the rearward facing mode. The seats were installed using the LATCH system, ELR lap/shoulder belts, or ALR lap/shoulder belts in seating positions 4 and 6 on a vehicle buck mounted to the sled test base. The infant seat and 6 month old CRABI anthropometric test device (ATD) installation methods were in accordance with standards set forth in the National Highway Traffic Safety Administration's (NHTSA) FMVSS No. 213, Child Restraint Systems. All tests were conducted on pneumatic controlled acceleration sled (HYGE, Inc., PA, USA) at 48 km/h. Results: Installation of infant seat type RFCRS using the LATCH system resulted in higher HIC 15 values when compared to using the available lap/shoulder seatbelt (ELR or ALR). The mean HIC 15 values were most severe when infant seat type RFCRS were installed using LATCH ( Graco SnugRide® HIC 15 = 394 and Britax Chaperone HIC 15 = 133) compared to using either ELR lap/shoulder belts ( Graco SnugRide® HIC 15 = 218 and Britax Chaperone HIC 15 = 65) or ALR lap/shoulder belts ( Graco SnugRide® HIC 15 = 194 and Britax Chaperone HIC 15 = 78). The installation method did not result in a statistically significant difference in HIC for the convertible type RFCRS ( Evenflo Tribute®). In many of the tests, the ATD's head struck the seatback in which the RFCRS was installed. These head strikes resulted in the higher HIC 15 scores recorded throughout the testing. Conclusions: The results of this study suggest that LATCH does not offer equal protection to lap/shoulder belts from head injuries in rear impacts when used with infant seat type RFCRS. 相似文献
19.
Objectives: Multiple sclerosis (MS) is a neurological disease that commonly results in physical and cognitive dysfunction. Accordingly, MS might impact the ability to safely cross the street. The purpose of this study was to examine the feasibility of a simulated street-crossing task in persons with MS and to determine differences in street-crossing performance between persons with MS and non-MS controls. Methods: 26 participants with MS (median Expanded Disability Status Scale [EDSS] score = 3.5) and 19 controls completed 40 trials of a virtual street-crossing task. There were 2 crossing conditions (i.e., no distraction and phone conversation), and participants performed 20 trials per condition. Participants were instructed that the goal of the task was to cross the street successfully (i.e., without being hit be a vehicle). The primary outcome was task feasibility, assessed as completion and adverse events. Secondary outcomes were measures of street-crossing performance. Results: Overall, the simulated street-crossing task was feasible (i.e., 90% completion, no adverse events) in participants with MS. Participants with MS waited longer and were less attentive to traffic before entering the street compared with controls (all P < .05). Participants with MS also took longer to cross the street and were closer to oncoming vehicles when exiting the street compared to controls (all P < .05). When distracted, all participants took longer to initiate crossing, took longer to cross the street, and made more head turns while crossing (all P < .05). There were no significant group by condition interaction effects (all P > .05). Conclusions: A virtual street-crossing task is feasible for studying street-crossing behavior in persons with mild MS and most individuals with moderate MS. Virtual street-crossing performance is impaired in persons with MS compared to controls; however, persons with MS do not appear to be more vulnerable to a distracting condition. The virtual reality environment presents a safe and useful setting for understanding pedestrian behavior in persons with MS. 相似文献
20.
Objective: Though autonomous emergency braking (AEB) systems for car-to-cyclist collisions have been under development, an estimate of the benefit of AEB systems based on an analysis of accident data is needed for further enhancing their development. Compared to the data available from in-depth accident data files, data provided by drive recorders can be used to reconstruct car-to-cyclist collisions with greater accuracy because the position of cyclists can be observed from the videos. In this study, using data from drive recorders, the performance and limitations of AEB systems were investigated. Method: Data of drive recorders involving taxi-to-cyclist collisions were collected. Using the images collected from the drive recorders of those taxis, 40 cases of 90° car-to-cyclist intersection collisions were reconstructed using PC-Crash. Then, the collisions were reconstructed again utilizing car models with AEB systems installed while changing the sensor’s field of view (FOV) and the delay time of initiating vehicle deceleration. Results: The angle of FOV has a significant influence on avoiding car-to-cyclist collisions. Using a 50° FOV with a braking delay time of 0.5?s resulted in avoiding 6 collisions, and using a 90° FOV resulted in avoiding an additional 14 collisions. Even when installing an ideal AEB system providing 360° FOV and no delay time for braking, 8 collisions were not avoided, though the impact velocities were reduced for all of these remaining collisions. These collisions were caused by the cyclists’ sudden appearance in front of cars, and the time-to-collision (TTC) when the cyclists appeared was less than 0.9?s. Conclusion: The AEB systems were effective for mitigating collisions that occurred due to driver perception delay. Because cyclists have a traveling velocity, a wide-angle FOV is effective for reduction of car-to-cyclist intersection collisions. The reduction of delay time in braking can reduce the number of collisions that are close to the braking performance limit. The collisions that remained even with an ideal AEB system in the PC-Crash simulation indicate that such collisions could still occur for autonomous cars if the traffic environment does not change. 相似文献
|
