Investigation of Child Restraint System (CRS) Compatibility in the Vehicle Seat Environment

Objective: Child restraint system (CRS) misuse is common and can have serious consequences to child safety. Physical incompatibilities between CRS and vehicles can complicate the installation process and may worsen CRS misuse rates. This study aims to identify the most common sources of incompatibility between representative groups of CRS and vehicles.

Methods: Detailed dimensional data were collected from 59 currently marketed CRS and 61 late model vehicles. Key dimensions were compared across all 3,599 theoretical CRS/vehicle combinations and the most common predicted incompatibilities were determined. A subset of 34 physical installations was analyzed to validate the results.

Results: Only 58.2% of rear-facing (RF) CRS/vehicle combinations were predicted to have proper agreement between the vehicle's seat pan angle and the CRS manufacturers’ required base angle. The width of the base of the CRS was predicted to fit snugly between the vehicle's seat pan bolsters in 63.3% of RF CRS/vehicle combinations and 62.2% of forward-facing (FF) CRS/vehicle combinations. FF CRS were predicted to be free of interaction with the vehicle's head restraint in 66.4% of combinations. Roughly 90.0% of RF CRS/vehicle combinations were predicted to have enough horizontal clearance space to set the front seat in the middle its fore/aft slider track. Compatibility rates were above 98% regarding the length of the CRS base compared to the length of the vehicle seat pan and the ability of the top tether to reach the tether anchor. Validation studies revealed that the predictions of RF CRS base angle range vs. seat pan angle compatibility were accurate within 6%, and head restraint interference and front row clearance incompatibilities may be more common than the dimensional analysis approach has predicted.

Conclusions: The results of this study indicate that RF CRS base angles and front row clearance space, as well as FF CRS head restraint interference, are frequent compatibility concerns. These results enable manufacturers, researchers, and consumers to focus their attention on the most relevant CRS/vehicle incompatibility issues in today's market.     

Evaluating the Effect of a Mechanical Adjunct to Improve the Installation of Child Restraint Systems to Vehicles

Objectives: We explored if an alternative CRS design that utilized a mechanical adjunct to amplify the force applied to the adult seat belt (intervention CRS) results in more accurate and secure attachment between the CRS and the vehicle compared to similar CRS models that use LATCH or the existing adult seat belt. We conducted three separate studies to address this question and additionally explored: (1) the contribution of prior CRS installation experience (Study 1), (2) the value-added of CRS labeling (Study 2), and (3) paper-based vs. video instructions (Study 3).

Methods: In Studies 1 and 2 we assessed a forward facing combination CRS design (intervention CRS) compared to a commercially available LATCH equipped model (control CRS) and in Study 3 we conducted a similar study using a convertible model of both the intervention and control CRS. Participants installed both CRS in a contemporary minivan and could choose which type of attachment to use for the control CRS (LATCH or seat belt); order of installation was counter-balanced. Evaluators systematically examined installations for accuracy and security.

Results: Study 1: A greater proportion of participants in both the experienced and inexperienced groups was able to securely install the intervention CRS compared to the control CRS: (45% vs. 16%, p =.0001 for experienced) and (37% vs. 6%, p =.003 for inexperienced). No differences between the CRS were observed for accuracy of installation in either user group. Study 2: A greater proportion of participants were able to securely install the enhanced intervention CRS compared to the control CRS: (62% vs. 9%, p =.001). The intervention CRS demonstrated reduced installation accuracy: (30% vs. 61%, p =.001). Study 3: A greater proportion of participants was able to securely install the intervention CRS compared to the control CRS: 79% vs. 66% p =.03, but this effect was smaller than in the previous studies. Participants were less likely to achieve an accurate installation with the intervention CRS compared to the control CRS: 54% vs. 79%, p =.004. Common accuracy errors in each study included twisting or misrouting the seatbelt when installing the intervention CRS.

Conclusions: Our results suggest that novel CRS designs that utilize mechanical advantage to facilitate attachment of the CRS to the vehicle result in a tighter installation compared to LATCH equipped models, but an increase in accuracy errors occurred.     

Posture and belt fit in reclined passenger seats

Abstract

Objective: Highly reclined postures may be common among passengers in future automated vehicles. A laboratory study was conducted to address the need for posture and belt fit in these seating configurations.

Methods: In a laboratory vehicle mockup, the postures of 24 men and women with a wide range of body size were measured in a typical front vehicle seat at seat back angles of 23°, 33°, 43°, and 53°. Data were gathered with and without a sitter-adjusted headrest. Posture was characterized by the locations of skeletal joint centers estimated from digitized surface landmarks.

Results: Regression analysis demonstrated that the pelvis rotated rearward and lumbar spine flexion decreased with increasing recline. The lap portion of the 3-point belt was more rearward relative to the pelvis in more-reclined postures, and the torso portion crossed the clavicle closer to the midline of the body. Regression equations were developed to predict posture and belt fit variables as a function of passenger characteristics, seat back angle, and the use of the headrest.

Conclusions: Spine posture changes as the torso reclines in an automotive seat, and belt fit is altered by the change in posture. The results can be used to accurately position crash test dummies and computation human models and to guide the design of belt restraints.     

Use of child safety seats and booster seats in the United States: A comparison of parent/caregiver-reported and observed use estimates

Background: Motor-vehicles crashes are a leading cause of death among children. Age- and size-appropriate restraint use can prevent crash injuries and deaths among children. Strategies to increase child restraint use should be informed by reliable estimates of restraint use practices. Objective: Compare parent/caregiver-reported and observed child restraint use estimates from the FallStyles and Estilos surveys with the National Survey of the Use of Booster Seats (NSUBS). Methods: Estimates of child restraint use from two online, cross-sectional surveys—FallStyles, a survey of U.S. adults, and Estilos, a survey of U.S. Hispanic adults—were compared with observed data collected in NSUBS. Parents/caregivers of children aged ≤ 12 years were asked about the child’s restraint use behaviors in FallStyles and Estilos, while restraint use was observed in NSUBS. Age-appropriate restraint use was defined as rear-facing child safety seat (CSS) use for children aged 0–4 years, forward-facing CSS use for children aged 2–7 years, booster seat use for children aged 5–12 years, and seat belt use for children aged 9–12 years. Age-appropriate restraint users are described by demographic characteristics and seat row, with weighted prevalence and corresponding 95% confidence intervals (CI) calculated. Results: Overall, child restraint use as reported by parents/caregivers was 90.8% (CI: 87.5–94.1) (FallStyles) and 89.4% (CI: 85.5–93.4) for observed use (NSUBS). Among Hispanic children, reported restraint use was 82.6% (CI: 73.9–91.3) (Estilos) and 84.4% (CI: 79.0–88.6) for observed use (NSUBS, Hispanic children only). For age-appropriate restraint use, estimates ranged from 74.3% (CI: 69.7–79.0) (FallStyles) to 59.7% (CI: 55.0–64.4) (NSUBS), and for Hispanic children, from 71.5% (CI: 62.1–81.0) (Estilos) to 57.2% (CI: 51.2–63.2) (NSUBS, Hispanic children only). Conclusion and Practical Application: Overall estimates of parent/caregiver-reported and observed child restraint use were similar. However, for age-appropriate restraint use, reported use was higher than observed use for most age groups.     

Coverage of motor vehicle crashes with injuries in U.S. newspapers, 1999-2002

Problem

The aims of the study were to evaluate information on motor-vehicle crashes with injuries provided in newspaper reports and to assess the frequency of thematic and episodic reporting of motor-vehicle crashes.

Method

The study used Fatal Analysis Reporting System (FARS) derived variables to code a nationally representative sample of U.S. newspaper reports of motor-vehicle crashes from 1999-2002. A total of 473 newspaper reports of motor-vehicle crashes with injuries were included. Information on the crash event, people involved, and vehicles was extracted. The reports were coded for episodic and thematic news framing.

Results

A majority of newspaper reports used episodic framing. The majority of reports included information on the type of crash, but characteristics about people and vehicles were rarely reported.

Discussion

Lack of information in newspapers makes them an incomplete source from which to influence public perceptions and attitudes.

Impact on industry

This provides an opportunity for news print media to improve public health content.

Impact on industry

Newspapers represent an important source of public information; they are, however, an incomplete source [Voight, B., Lapidus, G., Zavoski, R., & Banco, L. (1998). Injury reporting in Connecticut newspapers. Injury Prevention, 4, 292-294.; Baullinger, J., Quan, L., Bennett, E., Cummings, P., & Williams, K. (2001). Use of Washington state newspaper for submersion injury surveillance. Injury Prevention, 7, 339-342]. To increase the accuracy of information provided to the public through media sources, there is a need for increased communication between public health professionals and reporters.The results of this study raise concerns about the contents of motor-vehicle crash information provided in newspapers and suggest that newspapers do not provide information to allow public perception to be in accord with the importance of motor-vehicle crash injuries and health promoting actions to reduce risk of injury. More balanced and detailed information in newspapers would provide an opportunity for news print media to improve public health programs and public perception about the impact of motor-vehicle crashes on safety for all.     

Factors affecting use and nonuse of child safety car seats in Gorgan,Iran

Objective: Motor vehicle accidents, which are among the main causes of child mortality in Iran and the Middle East, impose staggering costs for the community. Ignoring use of safety devices for children in most motor vehicle crashes will lead to death or serious injury. Because few studies have been performed on effective and predictive factors regarding use of child safety seats, the purpose of this study was to examine the factors affecting the use and nonuse of child safety seats, along with the factors that can facilitate how a child safety seat is used.

Method: This study was conducted in the urban area of Gorgan using a questionnaire. Through random selection, 204 parents with at least one child, aged 8?years or younger, reported their knowledge about the benefits of using a child safety seat.

Results: The results showed that 80% of parents never use a child safety seat, and 13% always use a child safety seat. More than 93% thought that it was necessary to make usage of the child safety seat obligatory. In addition, 80% of parents believed that a child safety seat prevents children from injury in crashes. In addition, 38% of parents were not aware of child safety devices and child safety, less than 20% said that they did not use a child safety seat because their spouse did not support its use, and 28% of them thought that a child safety seat does not affect the safety of the child. In general, 91% of parents reported that if child safety seat use were mandated, the frequency of use would increase. A law on the use of child safety seats is a very important variable in their use, which can enhance the chance of using a child safety seat by 6.5 times.

Conclusion: Special instructions should be developed to create incentive strategies for using a child safety seat. Mandating the use of a child safety seat, equipping cars with a child safety seat, encouraging children to use it, and providing continuous education and training are important factors for increasing the use of child safety seats.     

Effects of LATCH versus Available Seatbelt Installation of Rear Facing Child Restraint Systems on Head Injury Criteria for 6 Month Old Infants in Rear End Collisions

Objective: The Lower Anchor and Tethers for CHildren (LATCH) system was introduced in vehicles made after September 1, 2002 and intended to make installation of rear and forward-facing child safety seats easier. Due to the lack of rear impact testing of RFCRS required per the Federal Motor Vehicle Safety Standards (FMVSS), the purpose of this study was to explore the effects, if any, of installation method of RFCRS on the performance of commonly purchased makes and models of RFCRS. Specifically, we hypothesize that in a 48 km/h (29.8 MPH) rear-end collision, installation of RFCRS using the LATCH system will result in higher Head Injury Criteria (HIC) values when compared to using the available lap/shoulder seatbelt (Emergency Locking Retractor - ELR or Automatic Locking Retractor - ALR).

Methods: The test matrix included 36 rear impact sled tests conducted using 3 installation methods on 3 models of RFCRS: the Graco SnugRide® with and without the base, the Britax Chaperone with base-mounted anti-rebound bar, and the Evenflo Tribute®, a model of convertible rearward/forward facing restraint system used in the rearward facing mode. The seats were installed using the LATCH system, ELR lap/shoulder belts, or ALR lap/shoulder belts in seating positions 4 and 6 on a vehicle buck mounted to the sled test base. The infant seat and 6 month old CRABI anthropometric test device (ATD) installation methods were in accordance with standards set forth in the National Highway Traffic Safety Administration's (NHTSA) FMVSS No. 213, Child Restraint Systems. All tests were conducted on pneumatic controlled acceleration sled (HYGE, Inc., PA, USA) at 48 km/h.

Results: Installation of infant seat type RFCRS using the LATCH system resulted in higher HIC₁₅ values when compared to using the available lap/shoulder seatbelt (ELR or ALR). The mean HIC₁₅ values were most severe when infant seat type RFCRS were installed using LATCH (Graco SnugRide® HIC₁₅ = 394 and Britax Chaperone HIC₁₅ = 133) compared to using either ELR lap/shoulder belts (Graco SnugRide® HIC₁₅ = 218 and Britax Chaperone HIC₁₅ = 65) or ALR lap/shoulder belts (Graco SnugRide® HIC₁₅ = 194 and Britax Chaperone HIC₁₅ = 78). The installation method did not result in a statistically significant difference in HIC for the convertible type RFCRS (Evenflo Tribute®). In many of the tests, the ATD's head struck the seatback in which the RFCRS was installed. These head strikes resulted in the higher HIC₁₅ scores recorded throughout the testing.

Conclusions: The results of this study suggest that LATCH does not offer equal protection to lap/shoulder belts from head injuries in rear impacts when used with infant seat type RFCRS.     

车对车侧面碰撞兼容性影响因素分析

汽车碰撞兼容性由于能更好地反映真实交通事故,已发展成为被动安全研究领域中最具安全技术潜力的新技术。针对侧面冲击载荷作用下车对车的碰撞兼容性问题,从理论分析和仿真分析角度出发,研究了主要影响因素:两车质量比、汽车前端刚度特性、汽车几何特征对两车碰撞兼容性的影响。结果表明:质量比是影响两车兼容性好坏的关键因素,通过降低汽车前端变形吸能刚度和主吸能位置、提高两车碰撞接触面积等可以提高被撞击车的耐撞性和降低撞击车的攻击性,从而降低所有涉案人员损伤,提高车对车侧面碰撞兼容性。     

Characterizing the child passenger safety workforce in Michigan: A statewide survey in 2015

Objective: In this study, we assessed the number of child passenger safety technicians (CPSTs) in Michigan over 4 years and characterized the CPST workforce in 2015 to identify factors associated with high productivity and longevity in the field.

Methods: We determined the number of CPSTs and those newly certified using lists from the Michigan Office of Highway Safety Planning (OHSP) from 2012 to 2015. We conducted a statewide survey of Michigan CPSTs in October 2015. Analyses were conducted in 2016. The survey assessed demographic characteristics, reasons to enter the field and maintain certification, and motivations to conduct seat checks. We used CPST-reported time devoted to seat checks and average number of seats checked per month to create a composite “activity level” variable. We examined activity levels across several characteristics.

Results: The number of CPSTs ranged from 941 to 980 over the study period, with approximately 200 new certifications annually. In 2015, surveys were started by 496 of 962 eligible CPSTs and 427 submitted complete responses. CPST-instructors had a higher response rate than CPSTs in general (89 vs. 49%, P < .0001). The majority of respondents were women (71%) and self-identified as white (88%). More than one third were 35–44 years old. Just 7% were comfortable checking seats using a language other than English. “Personal reasons” were most often cited motivation for becoming a CPST and maintaining certification. Natural fit/job enhancement were more common reasons to maintain certification than become a CPST. Time and distance had the greatest influence on seat check participation. Perceived need, appointments vs. drop-in, and employer factors were very influential for 10–15% of CPSTs. Few CPSTs considered free food and payments/giveaways very influential. About 40% of respondents were considered high-activity (>24 seats checked/year), one third medium-activity (5 to 24 seats checked/year), and one quarter low-activity (<5 seats checked/year). High-activity CPSTs most commonly reported both being paid and volunteering their time to check seats, worked with a Safe Kids coalition, worked in law enforcement or social services, and had recertified at least once. Motivation to participate in seat checks did not vary with activity level.

Conclusions: Understanding the demographic characteristics and motivations of CPSTs can help Michigan OHSP recruit and retain a workforce dedicated to increasing the safety of child passengers. Agencies hosting seat checks can use these results to align the strategies they employ to incentivize CPSTs to serve in their communities with the factors that have the greatest influence on CPST participation.     

Restraint use in the Eastern Province of the Kingdom of Saudi Arabia

Objectives: This study set out to examine seat belt and child restraint use in the Dammam Municipality of the Kingdom of Saudi Arabia, based on the premise that an increase in seat belt use would significantly reduce personal injury in traffic crashes. It was expected that local data would help identify intervention strategies necessary to improve seat belt use in the region.

Methods: The research involved 2 methodologies. First, 1,389 face-to-face interviews were conducted with male and female adults in regional shopping plazas regarding their own and their children's restraint use in their vehicles and reasons for these attitudes and beliefs. Second, 2 on-road observation studies of adult and child restraint use were conducted by trained observers. Occupants of approximately 5,000 passenger vehicles were observed while stopped at representative signalized traffic intersections.

Results: The findings showed front seat belt use rates of between 43 and 47% for drivers and 26 to 30% for front seat passengers; rear seat belt use rates were lower. While there seemed to be some knowledge about the purpose and reasons for restraining both adults and children in suitable restraints, this failed to be confirmed in the on-road observations.

Conclusions: Reasons for these rates and findings are discussed fully, and recommendations for improving seat belt use in the Dammam Municipality are included.     

Parental awareness and perception for correct use of child restraint systems and airbags in Brazil

Objective: The objective of this study was to obtain information about the current knowledge and habits of parents who transport children in cars in Brazil.

Methods: A cross-sectional survey was conducted using specifically designed self-report questionnaires to parents of children attending a private pediatric office in a town in southwest Brazil. Data were collected regarding children's age, gender, height, and weight and possession of an automobile child restraint system (CRS), its type, frequency and adequacy of use, and reasons for not possessing or not using the devices. Parents were asked whether their cars were equipped with airbags and about the use of the restraints in seats with airbags.

Results: We interviewed parents of 293 children transported in cars who met the criteria for use of a CRS. Children were younger than 1 year in 15.3% of the cases, between 1 and 4 years in 38.6%, and older than 4 in 46.1%. Cars were equipped with CRS in 78.5% of the cases, but in only 58% of the cases was the device proper for child's age and adequately installed in the seat. Among owners of the devices, 84.3% reported that they always used it. Reasons for infrequency were forgetting the device at home or in another car (6.4%), the child disliking the device (3.2%), or the false impression that the child was grown enough not to use it (3.2%)l 87.1% did not justify why they did not always use the CRS. Considering type of CRS, correct installation of the seat, and frequency of use, only 44.4% of children under 1 year, 69.9% of those 1 to 4 years, and 52.6% over age 4 were protected. Only 28.6% of the parents knew that children should never be positioned in a seat with active airbags.

Conclusion: Considering appropriateness for age, correctness of installation (in the back seat in the correct orientation), and frequency of use, only 50.85% (149/293) of the children were reported as always protected with a CRS. Children between 1 and 4 years were more likely to always use a CRS in this Brazilian survey. We were also able to identify an important gap in the knowledge about airbags among parents. Further efforts are needed to correct those distortions.     

厂内机动车辆运输安全管理

为了保障厂内机动车辆运输安全,防止人员伤害事故的发生,对驾驶人员、厂工、道路及车车辆技术状态等提出了具体要求,并着重提出加强对厂内机动车辆的安全使用管理。     

Driving self-regulation and ride service utilization in a multicommunity,multistate sample of U.S. older adults

Objectives: This study examined a multicommunity alternative transportation program available 24 hours a day, 7 days a week, for any purpose, offering door-through-door service in private automobiles to members who either do not drive or are transitioning away from driving. Specific aims were to describe the characteristics of members by driving status and ride service usage of these members.

Methods: Data came from administrative records maintained by a nonprofit ride service program and include 2,661 individuals aged 65+ residing in 14 states who joined the program between April 1, 2010, and November 8, 2013. Latent class analysis was used to group current drivers into 3 classes of driving status of low, medium, and high self-regulation, based on their self-reported avoidance of certain driving situations and weekly driving frequency. Demographics and ride service use rate for rides taken through March 31, 2014, by type of ride (e.g., medical, social, etc.) were calculated for nondrivers and drivers in each driving status class.

Results: The majority of ride service users were female (77%) and aged 65–74 years (82%). The primary method of getting around when enrolling for the transportation service was by riding with a friend or family member (60%). Among the 67,883 rides given, nondrivers took the majority (69%) of rides. Medical rides were the most common, accounting for 40% of all rides.

Conclusions: Reported ride usage suggests that older adults are willing to use such ride services for a variety of trips when these services are not limited to specific types (e.g., medical). Further research can help tailor strategies to encourage both nondrivers and drivers to make better use of alternative transportation that meets the special needs of older people.     

Validation of not-at-fault driver representativeness assumption for quasi-induced exposure using U.S. national traffic databases

Introduction:The quasi-induced exposure (QIE) method has been widely implemented into traffic safety research. One of the key assumptions of QIE method is that not-at-fault drivers represent the driving population at the time of a crash. Recent studies have validated the QIE representative assumption using not-at-fault drivers from three-or-more vehicle crashes (excluding the first not-at-fault drivers; D3_other) as the reference group in single state crash databases. However, it is unclear if the QIE representativeness assumption is valid on a national scale and is a representative sample of driving population in the United States. The aims of this study were to assess the QIE representativeness assumption on a national scale and to evaluate if D3_other could serve as a representative sample of the U.S. driving population. Method: Using the Fatality Analysis Reporting System (FARS) and the National Occupant Protection Use Survey (NOPUS), distributions of driver gender, age, vehicle type, time, and roadway type among the not-at-fault drivers in clean two-vehicle crashes, the first not-at-fault drivers in three-or-more-vehicle crashes, and the remaining not-at-fault drivers in three-or-more vehicle crashes were compared to the driver population observed in NOPUS. Results: The results showed that with respect to driver gender, vehicle type, time, and roadway type, drivers among D3_other did not show statistical significant difference from NOPUS observations. The age distribution of D3_other driver was not practically different to NOPUS observations. Conclusions: Overall, we conclude that D3_other drivers in FARS represents the driving population at the time of the crash. Practical applications: Our study provides a solid foundation for future studies to utilize D3_other as the reference group to validate the QIE representativeness assumption and has potential to increase the generalizability of future FARS studies.     

The Crash Compatibility of Cars and Light Trucks

This paper investigates the compatibility of cars, light trucks, and vans (LTVs) involved in traffic crashes. An analysis of U.S. crash statistics shows that, although LTVs currently account for approximately one–third of registered U.S. passenger vehicles, collisions between cars and LTVs account for over one–half of all fatalities in light vehicle–to–vehicle crashes. In these crashes, 81 percent of the fatally injured are found to be occupants of the car. These statistics suggest that LTVs and passenger cars are incompatible in traffic crashes, and that LTVs are the more aggressive of the two vehicle classes. The fundamental incompatibility between cars and LTVs is observed even when the analysis is restricted to collisions between vehicles of model year 1990 or later - indicating that, despite the availability of newer safety countermeasures, e.g., airbags, the incompatibility between cars and LTVs will persist in future fleets. Through examination of crash test results, field crash statistics, and vehicle measurements, the paper explores the design imbalances between cars and LTVs, e.g., mass, stiffness, and geometry, which lead to these severe crash incompatibilities.     

美国、澳大利亚的矿山安全

澳大利亚,矿山救护车将开赴现场澳大利亚1991年～2001年矿山死亡人数及伤害次数如下表:(澳大利亚财政年度由每年4月至下一年3 澳大利亚昆士兰州政府为加强矿山安全,已开始进行矿山救护车的研究。研究该车的目的是改善井下矿工的自救能力。该项工作将由位于Redbank的矿山试验研究站与昆士兰州矿山救护服务中心与澳大利亚煤矿协会联合进行。该救护车应能在特     

美国注册安全师机制

概述专业人士一般熟悉具有90多年历史的美国安全工程师学会但也许不了解美国实际上并没有安全工程师这一称谓安全工程师学会实乐上是一个职业安全从业人员的会员制学会和一般的专业学会职能基本相同在美国安全工程师“实际上称为注册安全师。注册安全师不仅是安全工程专家他们在企业安全管理保险公司损失控制等方面也有很深的造诣这也许就是用安全师而不用安全工程师名