A bibliometric analysis of anaerobic digestion for methane research during the period 1994–2011

This study uses a bibliometric approach in identifying global research trends related to the anaerobic digestion of biomass for methane production using related literature in the Science Citation Index Expanded database, retrieved from the ISI Web of Science. The data used covers the period 1994–2011. The articles acquired from such literature were concentrated on the general analysis by scientific output, the research performances by countries, institutes, and collaborations, and the research trends by the frequency of author keywords, words in title, words in abstract, and ‘KeyWords plus’. The research outputs of anaerobic digestion for methane had notably increased in the field of environmental sciences, biotechnology and applied microbiology, environmental engineering, energy and fuels, and microbiology, while increased slightly in water resources. The USA with most publications and China with the highest growth rate were compared. Finally, author keywords, words in title and ‘KeyWords plus’ were analyzed contrastively, with the recent hotspots provided.     

The effect of moisture regimes on the anaerobic degradation of municipal solid waste from Metepec (México)

The State of México, situated in central México, has a population of about 14 million, distributed in approximately 125 counties. Solid waste management represents a serious and ongoing pressure to local authorities. The final disposal site ("El Socavón") does not comply with minimum environmental requirements as no liners or leachate management infrastructure are available. Consequently, leachate composition or the effects of rain water input on municipal solid waste degradation are largely unknown. The aim of this work was to monitor the anaerobic degradation of municipal solid waste (MSW), simulating the water addition due to rainfall, under two different moisture content regimes (70% and 80% humidity). The study was carried out using bioreactors in both laboratory and pilot scales. The variation of organic matter and pH was followed in the solid matrix of the MSW. The leachate produced was used to estimate the field capacity of the MSW and to determine the pH, COD, BOD and heavy metals. Some leachate parameters were found to be within permitted limits, but further research is needed in order to analyze the leachate from lower layers of the disposal site ("El Socavón").     

Formation characteristics of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and coplanar PCBs in fly ash from a gasification–melting process of municipal solid waste

PCDDs/DF and Co-PCB (dioxin) formations were studied with ash from a newly developed gasification and melting process for municipal solid waste. Ash samples were heated in a laboratory-scale fixed-bed reactor. Emphasis was placed on the effects of the type and composition of ash, temperatures, gas residence time, and gaseous organic precursors. Investigations using macroscopic and homologue distribution analyses led to the following conclusion. The ash from the gasification–melting process had the ability to generate dioxins in flue gas. A possible carbon source is unburned carbon in the ash samples, although this was very low (less than 0.01%). An experimental result that the level of dioxins generated from preheated fly ash obtained from a conventional incinerator was much lower than that from nonheated fly ash supported this conclusion. Dioxin concentrations obviously showed temperature dependence and peaked at 350°C. Dioxins formed in a gasification–melting process ash were readily desorbed from the surface, probably because of the low carbon content of the ash. There was no experimental evidence that gaseous organic precursors fed to the reactor generated dioxins. Therefore, an organic precursor was not essential for the formation of dioxins. A good linear relationship obtained between PCDDs/DFs and gas residence time also supported the assumption. Received: February 14, 2000 / Accepted: June 30, 2000     

Obtaining and characterization of catalytic materials from waste tires for the Fischer–Tropsch process

Journal of Material Cycles and Waste Management - In this contribution, the preparation of iron-based catalysts from waste tires is reported. Waste steel from disused tires was used as feedstock to...     

The biogenic content of process streams from mechanical–biological treatment plants producing solid recovered fuel. Do the manual sorting and selective dissolution determination methods correlate?

The carbon emissions trading market has created a need for standard methods for the determination of biogenic content (χ_B) in solid recovered fuels (SRF). We compare the manual sorting (MSM) and selective dissolution methods (SDM), as amended by recent research, for a range of process streams from a mechanical–biological treatment (MBT) plant. The two methods provide statistically different biogenic content values, as expressed on a dry mass basis, uncorrected for ash content. However, they correlate well (r² > 0.9) and the relative difference between them was <5% for χ_B between 21% ^w/w_d and 72% ^w/w_d (uncorrected for ash content). This range includes the average SRF biogenic content of ca. 68% ^w/w_d. Methodological improvements are discussed in light of recent studies. The repeatability of the SDM is characterised by relative standard deviations on triplicates of <2.5% for the studied population.