Technical, economic and environmental analysis of a MSW kerbside separate collection system applied to small communities

The main aim of this study was to evaluate the costs and environmental impacts induced by a fixed model of MSW kerbside separate collection system for communities up to 10,000 inhabitants, in order to evaluate the convenience for the smaller municipalities to unite and form more economically and environmentally sound systems. This topic is important not only due to the large number of small municipalities (e.g. in Italy 72% of the municipalities has less than 5000 inhabitants) but also to the fact that separate collection systems are typically designed to take into account only the technical and economic aspects, which is a practice but not acceptable in the light of the sustainable development paradigm. In economic terms, between 1000 and 4000 inhabitants, the annual per capita cost for vehicles and personnel decreased, with a maximum at approximately 180€/inhabitants/year; while, from 5000 up to 10,000 inhabitants, the annual per capita cost was practically constant and equal to about 80€/inhabitants/year. For the municipalities of less than 5000 inhabitants, from an economic point of view the aggregation is always advantageous. The environmental impacts were calculated by means of the Life Cycle Assessment tool SimaPro 7.1, while the economic-environmental convenience was evaluated by combining in a simple multicriteria analysis, the annual total per capita cost (€/inhabitants/year) and the annual total per capita environmental impact (kEco-indicator point/inhabitants/year), giving the same importance to each criteria. The analysis was performed by means of the Paired Comparison Technique using the Simple Additive Weighting method. The economic and environmental convenience of the aggregation diminishes with the size of the municipalities: for less than 4000 inhabitants, the aggregation was almost always advantageous (91.7%); while, for more than or equal to 5000 inhabitants, the aggregation was convenient only in 33.3% of the cases. On the whole, out of 45 cases examined, for the municipalities from 1000 to 9000 inhabitants, the aggregation was both economically and environmentally convenient in 60.0% of the cases.     

深圳市环境污染与经济增长关系的实证研究

采用深圳市1996—2009年的统计数据,分析了环境污染与经济增长之间的关系及其影响因素。结果表明,可吸入颗粒物浓度、工业废水排放量、工业废气排放量和工业固体废弃物产生量与人均GDP的拟合曲线呈现典型环境库兹涅茨曲线(EKC)特征,至2007年,这4个环境指标已经全部跨越拐点,目前处于EKC的右侧。同时,运用灰色关联法分析经济发展、社会发展、环境管理的变化趋势,探讨了深圳EKC的演变主要是由GDP增长、环保投资、职工年平均工资和技术进步等因子驱动的。     

Modelling and experimental investigation of environmental influences on the acetate and methane formation in solid waste

An anaerobic reaction model is represented and used for simulation of the biodegradation of organic compounds and the generation of biogas. The model is based on fundamental relationships among physical, chemical, thermodynamic and microbial processes occurring in municipal landfills. Local microbially mediated degradation processes occurring in municipal landfills are simulated in terms of hydrolysis of readily and inherently degradable organic matter, the formation of acetate as surrogate for intermediary low-molecular carbon substrates, and the generation of the biogases CH4 and CO2. Thus, the overall decomposition of the organic matter has been assumed to follow three sequential anaerobic reactions steps: hydrolysis, acetogenesis and methanogenesis. In order to study the impact of environmental factors on the biological decomposition processes, experiments have been conducted to investigate the effect of temperature and water content. In the degradation model, the impact of temperature and water content was defined as reaction rate influencing factors. Further, waste samples have been taken from four drill holes on a municipal landfill near Wolfsburg (Germany) and used to analyze and to describe the waste composition and prevailing environmental conditions dependent on the depth of the drill hole. The data and waste samples obtained from the landfill have also been used for model development and validation.     

An evaluation on the environmental consequences of residual CFCs from obsolete household refrigerators in China

Chlorofluorocarbons (CFCs) contained in household refrigerators consist mainly of CFC-11 and CFC-12, which will be eventually released into the environment. Consequentially, environmental releases of these refrigerants will lead to ozone depletion and contribute significantly to the greenhouse effect, if waste refrigerators are not disposed of properly. In the present paper, the potential release of residual CFCs and their substitutes from obsolete household refrigerators in China is examined, and their contributions to ozone depletion and greenhouse effect are compared with those of other recognized ozone-depleting substances (ODS) and greenhouse gases (GHGs). The results imply that annual potential amounts of released residual CFC-11 and CFC-12 will reach their maximums at 4600 and 2300 tons, respectively in 2011, and then decrease gradually to zero until 2020. Meanwhile, the amounts of their most widely used substitutes HCFC-141b and HFC-134a will keep increasing. Subsequently, the contribution ratio of these CFCs and their substitutes to ozone depletion will remain at 25% through 2011, and reach its peak value of 34% by 2018. The contribution to greenhouse effect will reach its peak value of 0.57% by 2010. Moreover, the contribution ratio of these CFCs to the total global release of CFCs will steadily increase, reaching its peak of 15% by 2018. Thus, this period from 2010 to 2018 is a crucial time during which residual CFCs and their substitutes from obsolete household refrigerators in China will contribute significantly to ozone depletion.     

Waste rechargeable electric lamps: characterisation and recovery of lead from their lead-acid batteries

Electrical electronics constitute a significant quantity of municipal solid wastes which are discarded after use in open dumpsites especially in the developing countries. The aim of this study was to characterise the material and chemical components, evaluate current management practices and investigate recovery of lead from battery electrodes (BEs) of waste rechargeable electric lamps (RLs). Twenty-six waste RLs of different models were sampled in Nigeria and characterised. Their BEs were analysed for Pb, Cr, Mn, Cu, Zn, Ni and Fe after acid digestion. Questionnaires were distributed to unselected respondents to assess usage and disposal of the lamps. Reaction of citric acid solutions with Pb in the presence of H₂O₂ was used for the recovery of Pb. 69 % of the respondents disposed their waste RLs in open dumpsites. The mean ± SD concentrations of Pb, Cr, Mn, Cu, Zn, Ni and Fe in the BEs were 600 ± 0.2 g/kg, 65.4 ± 40 mg/kg, 5.05 ± 4.0 mg/kg, 6.81 ± 5.0 mg/kg, 5.98 ± 3.0 mg/kg, 50.0 ± 30 mg/kg and 40.2 ± 35 mg/kg, respectively. The results show that the batteries are lead-acid batteries which require management. At the optimal conditions of S/L = 0.14, temperature = 20 °C and leaching time = 5 h, about 95 % Pb was recovered in form of lead citrate from the battery. High recovery of Pb is possible with simple and environment-friendly reactions.     

Waste collection systems for recyclables: An environmental and economic assessment for the municipality of Aarhus (Denmark)

Recycling of paper and glass from household waste is an integrated part of waste management in Denmark, however, increased recycling is a legislative target. The questions are: how much more can the recycling rate be increased through improvements of collection schemes when organisational and technical limitations are respected, and what will the environmental and economic consequences be? This was investigated in a case study of a municipal waste management system. Five scenarios with alternative collection systems for recyclables (paper, glass, metal and plastic packaging) were assessed by means of a life cycle assessment and an assessment of the municipality’s costs. Kerbside collection would provide the highest recycling rate, 31% compared to 25% in the baseline scenario, but bring schemes with drop-off containers would also be a reasonable solution. Collection of recyclables at recycling centres was not recommendable because the recycling rate would decrease to 20%. In general, the results showed that enhancing recycling and avoiding incineration was recommendable because the environmental performance was improved in several impact categories. The municipal costs for collection and treatment of waste were reduced with increasing recycling, mainly because the high cost for incineration was avoided. However, solutions for mitigation of air pollution caused by increased collection and transport should be sought.     

A technical, economic, and environmental analysis of energy production from newspaper in Ireland

The production of newspaper corresponds to 37 kg per person per annum in Ireland. Newspaper becomes a waste product in a short period of time; only 13% of domestic waste paper is recycled (data on newspaper is not available). Four scenarios, which generate energy from newspaper, are analysed. These scenarios may be summarised as follows: lignocellulosic biomass conversion to ethanol (transport fuel); co-digestion with the organic fraction of municipal solid waste and production of CH4-enriched biogas (transport fuel); co-firing with the residue of municipal solid waste in an incinerator; and gasification of newspaper as a sole fuel. Two of the scenarios involve transport fuel production; two involve the production of electricity and heat. Two of the scenarios involve newspaper as the sole ingredient; two involve co- utilisation of newspaper with another waste stream. Assuming no economic market for heat, then only the transport scenarios have the potential to be economic; indeed the biogas scenario is shown to be extremely competitive generating a potential profit of euro 227/t newspaper. A greenhouse-gas analysis indicates that the biogas scenario generated the best net greenhouse-gas savings. However when a market for heat is available, gasification was shown to be most advantageous.     

电网中的高次谐波及其抑制

阐述了电网中谐波的定义及谐波的管理标准;分析了电网的主要谐波源,并论述了谐波的危害及其抑制方法。     

Effective and innovative procedures to use phosphogypsum waste in different application domains: review of the environmental,economic challenges and life cycle assessment

Journal of Material Cycles and Waste Management - Phosphogypsum (PG) waste is a by-product generated from wet-process phosphoric acid (H3PO4) manufacturing during phosphate rock...     

我国废铅蓄电池产生量与再生铅产能的讨论

废铅蓄电池是再生铅主要原料,铅蓄电池产量、进出口量、社会消费保有量,以及铅蓄电池消费使用领域与废铅蓄电池产生量有关。预测2015年废铅蓄电池产生量,并讨论我国再生铅产能规模,供再生铅产业结构调整与区域布局调整作参考。     

压力式喷嘴在湿法烟气脱硫中的应用

从压力式喷嘴的结构特点、雾化特性及影响因素出发。系统叙述了压力式喷嘴的研究历史与现状。结合湿法脱硫工艺的特点，阐述了压力式喷嘴在湿法脱硫中的应用。并分析了当前的研究状况。     

不饱和季铵盐的合成及其聚合物在化工及环保领域的应用

按不饱和基团的类型对不饱和季铵盐进行了分类,并综述了其合成方法。介绍了其聚合物在含油污水处理、抗菌、纺织品、新材料等领域的应用。阐述了在不饱和季铵盐的开发及其聚合物的应用方面存在的问题。指出了今后的发展方向:应该加大科研投入,加快新型不饱和季铵盐的研发进程,特别是在主结构设计、纯度提高以及新型絮凝剂单体的多样性方面,以制备出多功能性的单体和聚合物。     

Tools for evaluation of impact associated with MSW incineration: LCA and integrated environmental monitoring system

The identification of significant pollutants emitted from the contamination source is the first step in evaluating the impact associated with anthropic activity. Municipal solid waste (MSW) incinerators are still generally perceived as great pollutant sources, in particular due to their gaseous emissions from the stack, which constitute the major effluent from the plant. In this work a life cycle assessment and an integrated environmental monitoring system were applied together, in order to obtain complete information about the incineration process and its environmental impact. The former is a proven methodology, but its application to waste management systems constitutes a relatively new field of application with a great developmental potential. The contribution of the incineration process to the different environmental impact categories was investigated, finding many avoided impacts due to energy recovery. The latter is an innovative approach that allows a remarkable understanding of impact due to a contamination source; interesting correlations were found between heavy metals both in gas emissions and in natural matrices in the surroundings.     

H2O2复合体系及其在环境治理中的应用

介绍了过氧化氢的基本性质,就过氧化氢在污水治理以及烟气污染防治方面的应用进展进行了评速,并展望了过氧化氢复合体系(H2O2/UV)同时脱硫、脱硝的前景及可能存在的问题.     

Influence of flue gas cleaning system on the energetic efficiency and on the economic performance of a WTE plant

Gas cleaning systems of MSW (Municipal Solid Waste) incinerators are characterised by the process employed to remove acid gases. The commonly used technologies for acid gas removal are: (1) dry treatment with Ca(OH)₂ or (2) with NaHCO₃, (3) semi-dry process with Ca(OH)₂ and (4) wet scrubbing. In some recent plants beside a wet cleaning system, a dry neutralization with Ca(OH)₂ is used. The goal is to reduce the amount of acid to be removed in the wet treatment and the liquid effluents produced. The influence of these different technologies on the electrical efficiency was investigated by a detailed simulation of a WTE (Waste To Energy) plant with a capacity of about 100,000 t/y of MSW. The effects of the different gas cleaning systems on electrical efficiency were significant. The difference of efficiency between the most advantageous technology, which is dry treatment with NaHCO₃, and the least advantageous technology which is semi-dry treatment, is about 0.8%. A simple economic analysis showed that the few advantages of dry technologies can often be lost if the costs of chemicals and the disposal of products are considered.     

分布式供能系统与上海世傅会的低碳节能环保建设

分布式供能系统是指以小规模、小容量、模块化、分散式的方式布置在用户附近,同时提供电力、热水等多种能源的高效能源供应系统,其主要技术形式为热电联供.热气机又被称为斯特林机,是一种多燃料、低噪声、可热电联供的原动机.上海世博会热气机热电联供系统以天然气为燃料,可同时向世博园区内某餐饮中心提供50 kw电力和1.5 gh热水.热气机热电联供系统在上海世博展会期间的成功运行,为上海世博会的低碳节能环保建设和新能源应用,以及分布式供能系统建设作出了贡献.     

Technical and economic analyses in the development of bioremediation processes

The very large extent of subsurface and groundwater contamination with toxic organic compounds has prompted research on a number of bioremedial processes. The justification of this research has been to achieve lower overall remedial costs than are incurred by currently existing technologies. Laboratory studies are often undertaken with the notion that a new set of process conditions can reduce reagent consumption or the time for treatment by a significant factor with an attendant reduction in overall remediation costs. Research programs are initiated on the basis of these simple premises. Our work has shown that many research projects have been undertaken for the wrong reasons and that experimental effort has often not been directed toward large-scale implementation. A preliminary process analysis has been shown to be a very valuable component of any research and development program on bioremedial and other innovative technologies. As described in this article, the analysis (1) identifies the critical engineering and cost parameters and (2) provides guidance to the research program in the design of experiments and the collection of data. The methodology is also useful in the review of proposed new technologies and treatment equipment. The article includes an example of a process analysis for an actual development project directed toward the remediation of solids contaminated with chlorinated hydrocarbons to illustrate the benefits and the power of the technique.     

Characteristics of environmental factors and their effects on CH4 and CO2 emissions from a closed landfill: An ecological case study of Shanghai

To elucidate the influence of landfill gas (LFG) emission on environmental factors, an ecological investigation that was primarily concerned with the characteristics of vegetation, cover soil, and solid waste in the landfill was carried out. Temporal and spatial variations in vegetation diversity and coverage and their effects on reducing the emission of methane in the landfill were investigated. The results showed that both vegetation coverage and diversity increased with elapsed landfill closure time. The transition trend of the vegetation species was from perennial plant (Phragmites australis) to annual plants. Perennial vegetation was the dominant type of vegetation during the early closure period, and annual vegetation coverage increased with closure time. Vegetation preferentially appeared in areas of comparatively high depth of cover soil, which was characterized by high moisture retentiveness that enabled vegetation growth. The concentrations of methane and carbon dioxide in the cover soil significantly decreased with increasing closure time. The concentrations of methane and carbon dioxide from bare cover soil were higher than those from vegetated cover soil whereas the CO₂ flux of bare cover soil was less than that of vegetated cover soil.