Trends and problems of solid waste management in developing countries: a case study in seven Palestinian districts

There is a great interest in solving problems related to municipal solid waste (MSW) management in the Palestinian territory. However, few studies have been done to assess the extent of these problems and suggest the best alternative solutions. This study aims at assessing MSW conditions in the seven major districts in northern West Bank, Palestinian territory. The study focuses on comparing several MSW management elements (such as collection, budget, and disposal) in municipalities, village councils, and refugee camps in the studied districts and the problems faced by these institutions in handling the waste. It also provides information on MSW collection service availability and waste disposal practices in the districts studied. It was found that, although MSW collection service was available for 98% of the residents in the areas surveyed, no proper treatment or landfill procedure was followed for the collected waste in most of these areas. Instead, waste burning in open dumpsites was the most common practice. Moreover, due to inefficient collection of waste disposal fees from the residents, municipalities were forced to sometimes cut the collection service and reduce its labor force, especially in villages. The budget for MSW management was between 2% and 8% of the total budget of the municipalities studied, indicating a low priority for this issue.     

Solid health care waste management status at health care centers in the West Bank – Palestinian Territory

Health care waste is considered a major public health hazard. The objective of this study was to assess health care waste management (HCWM) practices currently employed at health care centers (HCCs) in the West Bank – Palestinian Territory. Survey data on solid health care waste (SHCW) were analyzed for generated quantities, collection, separation, treatment, transportation, and final disposal. Estimated 4720.7 m³ (288.1 tons) of SHCW are generated monthly by the HCCs in the West Bank. This study concluded that: (i) current HCWM practices do not meet HCWM standards recommended by the World Health Organization (WHO) or adapted by developed countries, and (ii) immediate attention should be directed towards improvement of HCWM facilities and development of effective legislation. To improve the HCWM in the West Bank, a national policy should be implemented, comprising a comprehensive plan of action and providing environmentally sound and reliable technological measures.     

Change in MSW characteristics under recent management strategies in Taiwan

Reduction and recycling initiatives such as producer responsibility and pay-as-you-throw are being implemented in Taiwan. This paper presents a study assessing the impact of recently implemented municipal solid waste (MSW) reduction and recycling management strategies on the characteristics of waste feedstock for incineration in Taiwan. Through the periodic sampling of two typical MSW incineration plants, proximate and ultimate analyses were conducted according to standard methods to explore the influence of MSW reduction and recycling management strategies on incineration feed waste characteristics. It was observed that the annual amount of MSW generated in 2005 decreased by about 10% compared to 2003 and that the characteristics of MSW have changed significantly due to recent management strategies. The heating value of the MSW generated in Taiwan increased yearly by about 5% after program implementation. A comparison of the monthly variations in chemical concentrations indicated that the chlorine content in MSW has changed. This change results from usage reduction of PVC plastic due to the recycling fund management (RFM) program, and the food waste as well as salt content reduction due to the total recycling for kitchen garbage program. This achievement will improve the reduction of dioxin emissions from MSW incineration. In summary, management strategies must be conducted in tandem with the global trend to achieve a zero-waste-discharge country. When implementing these strategies and planning for future MSW management systems, it is important to consider the changes that may occur in the composition and characteristics of MSW over time.     

Charging systems for municipal solid waste: experience from the Czech Republic

The paper presents results of research into municipal waste treatment in the Czech Republic. Its special focus is on the impacts of various municipal solid waste charging systems on separating and recycling efforts of municipalities and households. The municipal solid waste charging systems are shortly described first, including the principles of the relevant Czech legislation. It shows that the Czech waste legislation provides space for implementing Pay-as-You-Throw (PAYT) models in the Czech Republic. The main results of representative surveys conducted by the authors within the EU PAYT project in 2003 in selected Czech municipalities and Prague households are shown. The survey confirmed that in municipalities that apply the PAYT charging system, citizens separate more waste and produce less residual waste. The survey data analysis has also shown which factors contributing to satisfactory waste separation are relevant and should be taken into the account when providing policy recommendations for introducing PAYT charging systems in other cities.     

Economies of size and density in municipal solid waste recycling in Portugal

The recycling of municipal solid waste has a remarkable importance in the preservation of the environment and the welfare of the society. However, it is also important that this service can be provided with efficient costs. This paper aims to search for economies of output density and economies of size in the selective collection and recycling activities in Portugal and to identify the size the utilities should have to become more cost efficient. The sample comprises all Portuguese recycling utilities operating in the wholesale segment in the period 2006–2010. The results show that the Portuguese recycling utilities should increase the quantities of municipal solid waste for recycling (especially glass and paper) and also become larger to dimensions corresponding to a supply of 400–550 thousand inhabitants. With the increasing amount of glass collected, utilities are simultaneously struggling to fulfill the targets established by the European legislation and explore the existing economies of output density. The results also show that the management of these services carried out by private companies and the use of incineration (by utilities) seem to reduce the costs of utilities while the regulation of these services and the composting of waste held by utilities tend to increase costs.     

Recovery and recycling practices in municipal solid waste management in Lagos, Nigeria

The population of Lagos, the largest city in Nigeria, increased seven times from 1950 to 1980 with a current population of over 10 million inhabitants. The majority of the city's residents are poor. The residents make a heavy demand on resources and, at the same time, generate large quantities of solid waste. Approximately 4 million tonnes of municipal solid waste (MSW) is generated annually in the city, including approximately 0.5 million of untreated industrial waste. This is approximately 1.1 kg/cap/day. Efforts by the various waste management agencies set up by the state government to keep its streets and neighborhoods clean have achieved only minimal success. This is because more than half of these wastes are left uncollected from the streets and the various locations due to the inadequacy and inefficiency of the waste management system. Whilst the benefits of proper solid waste management (SWM), such as increased revenues for municipal bodies, higher productivity rate, improved sanitation standards and better health conditions, cannot be overemphasized, it is important that there is a reduction in the quantity of recoverable materials in residential and commercial waste streams to minimize the problem of MSW disposal. This paper examines the status of recovery and recycling in current waste management practice in Lagos, Nigeria. Existing recovery and recycling patterns, recovery and recycling technologies, approaches to materials recycling, and the types of materials recovered from MSW are reviewed. Based on these, strategies for improving recovery and recycling practices in the management of MSW in Lagos, Nigeria are suggested.     

Municipal solid waste management strategies in Turkey

Municipal solid waste (MSW) is a major environmental problem in Turkey, as in many developing countries. Problems associated with municipal solid waste are difficult to address, but efforts towards more efficient collection and transportation and environmentally acceptable waste disposal continue in Turkey. Although strict regulations on the management of solid waste are in place, primitive disposal methods such as open dumping and discharge into surface water have been used in various parts of Turkey. This study presents a brief history of the legislative trends in Turkey for MSW management. The study also presents the MSW responsibility and management structure together with the present situation of generation, composition, recycling, and treatment. The results show that approximately 25 million ton of MSW are generated annually in Turkey. About 77% of the population receives MSW services. In spite of efforts to change open dumping areas into sanitary landfills and to build modern recycling and composting facilities, Turkey still has over 2000 open dumps.     

Research on solid waste management system: to improve existing situation in Corlu Town of Turkey

Over the past decades, uncontrolled population growth and rapid urbanization and industrialization have resulted in environmental problems in Corlu Town, Turkey. One of the most important problems is solid waste due to inadequate management practices. Nowadays, increasing public awareness of the environment compels local authorities to define and to adopt new solutions for waste management. This paper presents a general overview of current solid waste management practices in Corlu Town and principles of the recommended municipal solid waste (MSW) management system. In Corlu, 170 tonnes of municipal solid waste are generated each day, or 1.150 kg per capita per day. Approximately one-half of the municipal solid waste generated is organic material and 30% of the MSW consists of recyclable materials. The recommended system deals with maximizing recycling and minimizing landfilling of municipal solid waste, and consists of separation at source, collection, sorting, recycling, composting and sanitary landfilling. This study also analyzed the recommended system with respect to feasibility and economics. To evaluate whether the suggested system is cost effective or not, the operating cost of the recommended system and market prices of recyclable materials were compared, and the results show that the recommended system will reduce required landfill volume up to 27% of compared to the present situation. The profit of the recommended system is estimated to be about 80 million US dollars.     

Searching quality data for municipal solid waste planning

Effective waste reduction and recycling is predicated upon credible data on refuse generation and disposal. Despite improvements in the quality of data for municipal solid wastes (MSW) disposal, dependable generation and recycling statistics to support planning, regulation and administration are lacking. The available aggregates on national waste production from two sources do not conform to each other and fail to serve the requirements of local solid waste planning. As recycling estimates will be difficult to discern, the collection of generation data based on weighing waste samples at generator sites has been portrayed as the key for developing sustainable local databases. The coefficients developed from the databases for the various categories of residential, commercial, industrial and institutional wastes can be used as variables for waste generation models.     

Municipal solid waste management—An example of a partnership between five municipalities

Throughout the 1970s and 1980s many joint municipal partnerships were established in Denmark to take responsibility for the planning and handling of waste on behalf of municipalities in the partnership. RENO SYD is a typical joint municipal partnership, established to handle the municipal solid waste of five municipalities with a total of 65,000 inhabitants. The paper reviews the by-laws and organization of RENO SYD; the facility financing ownership or leasing; the collection of the various waste types; the reception at recycling cites; the refuse treatment, energy recovery, waste separation, treatment and landfill disposal; recycling; and economics, including tipping fees and taxation.     

Development of waste gasification and gas reforming system for municipal solid waste (MSW)

To achieve both high-efficiency power generation and high detoxification performance, advanced-type waste power generation plants such as pyrolysis and gas reforming plants are suggested. Further surveys on actual operational data of these plants are required in terms of reliability of the system when it is introduced to waste disposal sites. To verify the technical effectiveness of advanced-type waste power generation using the pyrolysis and gas reforming method, we evaluated 10?tons/day of municipal solid wastes (MSW) treated in a demonstration plant. A demonstration test was conducted over 100?days including 35?consecutive days of operation treating MSWs. The test results show high recycling performance and harmless nature of the plant which proves it to be an excellent waste recycling system. Major test results are as follows: (1) stabilization of waste treatment is possible with the wastes of various qualities, (2) clean gas is produced from the waste whose energy recovery ratio is approximately 40?%. (3) 99.3?% weight % of dried waste are recovered as valuable materials such as clean gas, char and metal, (4) total amount of dioxin emission to the outside of the plant is very small, down to 0.0051–0.018?μg?TEQ per ton waste.     

An Overview of Solid Waste Management and Plastic Recycling in Qatar

Municipal solid waste management (MSWM) constitutes one of the most crucial health and environmental problems facing authorities in the Arabian Gulf. Recent literature on current solid waste management (SWM) in Qatar has been reviewed in this paper, and a focused study has been carried out to provide a review on the total amount of municipal solid waste generated, stored, collected, disposed as well as the constituents of the waste. The analysis showed that Qatar produced around 2,000,000 tons of solid municipal waste annually, corresponding to a daily generation rate per capita of about 2.5 kg. About 60% of MSW is organic material and about 300 kg is composed daily. Landfill and composting is considered the most appropriate waste disposal techniques in Qatar. Um-Al-Afai landfill has nearly 80% of MSW. Because of the increased migration in Qatar, there is a sharp rise in the volume and also in the variety of solid waste. It is important to alleviate societal concerns over the increased rate of resource consumption and waste production; thus, policy makers have encouraged recycling and reuse strategies to reduce the demand for raw materials and to decrease the quantity of waste going to landfill. An example of the benefit of mechanical recycling of plastics compared to land filling and composting was conducted by GaBi 4 life cycle analysis tool which showed the benefits to the global warming and human toxicity. Recycling is the favored solution for plastic waste management, because it has a lower environmental impact on the defined impact categories, from Global Warming Potential (GWP) and Human Toxicity Potentials (HTP) indicators.     

Domestic waste management and recovery in Hong Kong

This article presents a review of the current municipal solid waste (MSW) and domestic waste generation and recovery situation in Hong Kong and identifies the factors affecting the waste generation rates. The results show that before 1997, MSW and domestic waste generation rates were driven by population growth and growth in the gross domestic product, with the latter having the larger effect. But recent waste generation data show poor correlation between waste generation rates and economic and population figures due to the increase in recycling efforts in the community. The results are also reported of a small-scale survey to explore the public attitude to waste recovery. The results show that most domestic householders have developed habits to carry out separation of waste at source for recycling, but the amount of recyclables recovered was low.     

Contribution of cooperative sector recycling to greenhouse gas emissions reduction: A case study of Ribeirão Pires,Brazil

Solid waste, including municipal waste and its management, is a major challenge for most cities and among the key contributors to climate change. Greenhouse gas emissions can be reduced through recovery and recycling of resources from the municipal solid waste stream. In São Paulo, Brazil, recycling cooperatives play a crucial role in providing recycling services including collection, separation, cleaning, stocking, and sale of recyclable resources. The present research attempts to measure the greenhouse gas emission reductions achieved by the recycling cooperative Cooperpires, as well as highlight its socioeconomic benefits. Methods include participant observation, structured interviews, questionnaire application, and greenhouse gas accounting of recycling using a Clean Development Mechanism methodology. The results show that recycling cooperatives can achieve important energy savings and reductions in greenhouse gas emissions, and suggest there is an opportunity for Cooperpires and other similar recycling groups to participate in the carbon credit market. Based on these findings, the authors created a simple greenhouse gas accounting calculator for recyclers to estimate their emissions reductions.     

Planning for integrated solid waste management at the industrial park level: a case of Tianjin, China

Industrial parks play a significant role in the production and use of goods and services. The proper management of solid waste is a major challenge for industrial parks due to the large quantity of wastes and the variability of waste characteristics from these types of developments. Therefore, integrated solid waste management has become very crucial to the industrial park managers. Such an approach requires industrial park managers to assess the overall use of resources, and to seek waste reduction, reuse and recycling opportunities both at the individual company level and among different tenant companies. The adoption of this method can bring both economic and environmental benefits. This paper introduces the planning efforts of a real case in China. It first presents the basic information on Tianjin Economic Development Area (TEDA), and then introduces its current practices on solid waste management. The main focus of this paper is to describe how to plan an integrated solid waste management system at TEDA. Benefits and challenges are all identified and analyzed. The experiences and methods from this case study should be applied in other industrial parks so as to improve the overall eco-efficiency of the whole industrial park.     

The use of chemical composition data in waste management planning--a case study

As the waste industry continues to move from a disposal-based system to one based on a combination of recovery options, the need for information on the composition of waste increases and this is reflected by the amount of information on the physical composition of municipal solid wastes that is now available. However, there is far less information on the chemical composition of municipal solid waste. The results from a number of chemical surveys from Europe are compared and show a reasonable degree of agreement, but several problems were identified with the data. Chemical and physical compositional data are combined in a case study example to investigate the flow of key potential pollutants in an integrated solid waste management system that uses materials recycling, composting, incineration and landfilling. This case study has shown that an integrated waste management strategy diverts lead and cadmium away from composting and recycling to incineration, which effectively isolates these elements from the environment through efficient capture of the pollutants followed by secure landfilling or recycling of the residues. However, further work is needed to determine the distribution of mercury in incineration residues and its fate when the residues are landfilled.     

Municipal solid waste management in Pudong New Area, China

The increase in population, the rapid economic growth and the rise in community living standards accelerate municipal solid waste (MSW) generation in developing cities. This problem is especially serious in Pudong New Area, Shanghai, China. The daily amount of MSW generated in Pudong was about 1.11 kg per person in 2006. According to the current population growth trend, the solid waste quantity generated will continue to increase with the city's development. In this paper, we describe a waste generation and composition analysis and provide a comprehensive review of municipal solid waste management (MSWM) in Pudong. Some of the important aspects of waste management, such as the current status of waste collection, transport and disposal in Pudong, will be illustrated. Also, the current situation will be evaluated, and its problems will be identified.     

Environmental management by the learning curve

This is a futuristic appreciation of waste management challenges and their solution by means of good management models. A literature review, administrative initiatives, research results, and experiences from practice are combined in this study to render an evolutionary picture of the change in paradigm relative to municipal solid waste possible to occur between 2000 and 2025. The principal stages of progress in the 25 years studied were: the correct characterization of municipal solid waste as a function of geographical location and recycling potential, the divided collection model and its corresponding learning curve, correct opportunity cost accounting tools, and the generally admitted and accepted changeover of municipal solid waste treatment from a technical to a management problem. It is reported that as a result of this progress, the municipal landfill is a species in extinction. Regional landfills with long life spans are the rule in 2025.     

Managing post-conflict demolition wastes in Gaza Strip: a case study on May 2021 conflict

Gaza Strip is considered as one of the armed conflicts prone areas in Middle East. Several intensive conflicts occurred in Gaza Strip in 2008, 2012, 2014 and 2021. These conflicts caused massive destroying the infrastructures, facilities, and buildings, which affected all services and activities in Gaza Strip. One of the major post-conflict issues in Gaza strip is the management of resulted demolition waste including its removal, sorting, recycling, and material recovery. In May 2021, over than 370,000 tons of demolition waste composed of rubbles and debris was generated during 11 days of armed conflict. The accumulated previous experience of rubbles and debris removal and recycling in Gaza Strip supported to perform a quick management approach for safe removal of the post-conflict demolition waste and reuse/recycle the resulted waste materials in various applications. The sorting and transporting process of concreate and non-concreate rubble elements of the waste were carried out in cooperation between local and international agencies as emergency recovery-funded projects. The most proportion of rubbles are concrete aggregates, thus, the material recovery was conducted through crushing process for concrete rubbles and then reusing it for road rehabilitation or producing concrete building blocks. The large concrete blocks reused to be placed for shoreline protection for specific area along Gaza beach. The recycling of post-conflict demolition waste management projects in Gaza Strip brought economic and social benefits through the reuse and recycle of resources and creation of job opportunities. In conclusion, although the post-conflict demolition waste management is quite different from municipal/industrial waste management in Gaza Strip, it is conducted through applying similar techniques of disaster waste management in waste removal, and those of construction and demolition (C&D) waste management in sorting, crushing, and sieving for recycling.