运用本质安全原理预防煤粉爆炸

旨在将本质安全原理与粉尘爆炸(以煤粉爆炸为例)的风险控制联系起来。利用20 L球形爆炸装置的标准测试方法测试煤粉及煤粉-CaCO3混合物的爆炸下限、最大爆炸压力、压力上升速度等爆炸特性。基于本质安全基本原理和试验结果,讨论预防煤粉爆炸的各种基本方法,并重点阐述本质安全原理与粉尘爆炸影响因素、不同的预防方法、过程设备的选择等之间的关系,对已制定的爆炸风险控制措施进行完善和补充。     

A quantitative risk management framework for dust and hybrid mixture explosions

Dust and hybrid-mixture explosions continue to occur in industrial processes that handle fine powders and flammable gases. Considerable research is therefore conducted throughout the world with the objective of both preventing the occurrence and mitigating the consequences of such events. In the current work, research has been undertaken to help move the field of dust explosion prevention and mitigation from its current emphasis on hazards (with an accompanying reliance on primarily engineered safety features) to a focus on risk (with an accompanying reliance on hierarchical, risk-based, decision-making tools). Employing the principles of quantitative risk assessment (QRA) of dust and hybrid-mixture explosions, a methodological framework for the management of these risks has been developed.The QRA framework is based on hazard identification via credible accident scenarios for dust explosions, followed by probabilistic fault-tree analysis (using Relex – Reliability Excellence – software) and consequence severity analysis (using DESC – Dust Explosion Simulation Code – software). Identification of risk reduction measures in the framework is accomplished in a hierarchical manner by considering inherent safety measures, passive and active engineered devices, and procedural measures (in that order). An industrial case study is presented to show how inherent safety measures such as dust minimization and dust/process moderation can be helpful in reducing dust and hybrid-mixture explosion consequences in a 400-m³ polyethylene storage silo.     

A review on hybrid mixture explosions: Safety parameters,explosion regimes and criteria,flame characteristics

The hybrid mixture of combustible dusts and flammable gases/vapours widely exist in various industries, including mining, petrochemical, metallurgical, textile and pharmaceutical. It may pose a higher explosion risk than gas/vapor or dust/mist explosions since the hybrid explosions can still be initiated even though both the gas and the dust concentration are lower than their lower explosion limit (LEL) values. Understanding the explosion threat of hybrid mixtures not only contributes to the inherent safety and sustainability of industrial process design, but promotes the efficiency of loss prevention and mitigation. To date, however, there is no test standard with reliable explosion criteria available to determine the safety parameters of all types of hybrid mixture explosions, nor the flame propagation and quenching mechanism or theoretical explanation behind these parameters. This review presents a state-of-the-art overview of the comprehensive understanding of hybrid mixture explosions mainly in an experimental study level; thereby, the main limitations and challenges to be faced are explored. The discussed main contents include the experimental measurement for the safety parameters of hybrid mixtures (i.e., explosion sensitivity and severity parameters) via typical test apparatuses, explosion regime and criterion of hybrid mixtures, the detailed flame propagation/quenching characteristics behind the explosion severities/sensitivities of hybrid mixtures. This work aims to summarize the essential basics of experimental studies, and to provide the perspectives based on the current research gaps to understand the explosion hazards of hybrid mixtures in-depth.     

When solids meet solids: A glimpse into dust mixture explosions

Mixing an inert solid or a less flammable compound with a combustible dust can be regarded as a direct application of the inherent safety principle of moderation. An experimental investigation was carried out to determine the evolution of the ignition sensitivity and the explosion severity of such various mixtures as a function of their compositions. It demonstrates that the introduction of small amounts of highly combustible powders (such as sulphur or nicotinic acid) to a less flammable dust (such as microcrystalline cellulose or carbon black) can strongly influence the ignition sensitivity as well as the explosion severity.It has notably been shown that the ignition sensitivity of solid/solid mixtures significantly rises up when only 10–5%wt. of highly flammable dust is introduced. Simple models can often be applied to estimate the minimum ignition energy, minimum ignition temperature and minimum explosive concentration of such mixtures. Concerning the dust explosivity, three cases have been studied: mixtures of combustibles dusts without reaction, dusts with reactions between the powders, combustible dusts with inert solid. If the evolution of the maximum explosion pressure can be estimated by using thermodynamic calculations, the maximum rate of pressure rise is more difficult to predict with simple models, and both combustion kinetics and hydrodynamics of the dust clouds should be taken into account. These results were also extended to flammable dust/solid inertant mixture. They clearly show that the concentration of solid inertant at which the ignition is not observed anymore could reach 95%wt. As a consequence, the common recommendation of solid inertant introduction up to 50–80%wt. to prevent dust explosion/ignition should be reconsidered.     

Applications of intrinsic safety characteristic parameters of propellant dust: Commercial multi-tube pyrotechnic hazard assessment

Fireworks are widely used in festivals around the world, but the safety issue during preparation the manufacture, storage, and operation of pyrotechnics has also been highly valued. Human operation error and insufficient recognition of the safety characteristics of pyrotechnics are the main factors in pyrotechnic incidents in Taiwan. This study considers thermal and explosion safety by electrostatic sensitivity, minimum ignition temperature, and explosion characteristics of propellant dust in commercial multi-tube pyrotechnics. The results show that propellant dust is not sensitive to static electricity, but it was ignited at 260 °C environment temperature. The lower explosion limit of propellant dust was 125–150 g/m³, which provided an effective control of the dust concentration in the workplace. It was also found that the explosive level of the propellant dust belonged to St-1, which is exceptionally close to St-2 explosion influence, and that cannot be ignored. The high temperature associated with the explosion reminded that after the firework is launched, it should be cooled before leaving. Combining the above results, this research suggests the environmental operation temperature and dust concentration should be controlled within a safer range to effectively avoid the occurrence of dust fire or explosion and substantially enhance the safety of the pyrotechnic industry.     

Experimental mine and laboratory dust explosion research at NIOSH

This paper describes dust explosion research conducted in an experimental mine and in a 20-L laboratory chamber at the Pittsburgh Research Laboratory (PRL) of the National Institute for Occupational Safety and Health (NIOSH). The primary purpose of this research is to improve safety in mining, but the data are also useful to other industries that manufacture, process, or use combustible dusts. Explosion characteristics such as the minimum explosible concentration and the rock dust inerting requirements were measured for various combustible dusts from the mining industries. These dusts included bituminous coals, gilsonite, oil shales, and sulfide ores. The full-scale tests were conducted in the Lake Lynn experimental mine of NIOSH. The mine tests were initiated by a methane–air explosion at the face (closed end) that both entrained and ignited the dust. The laboratory-scale tests were conducted in the 20-L chamber using ignitors of various energies. One purpose of the laboratory and mine comparison is to determine the conditions under which the laboratory tests best simulate the full-scale tests. The results of this research showed relatively good agreement between the laboratory and the large-scale tests in determining explosion limits. Full-scale experiments in the experimental mine were also conducted to evaluate the explosion resistance characteristics of seals that are used to separate non-ventilated, inactive workings from active workings of a mine. Results of these explosion tests show significant increases in explosion overpressure due to added coal dust and indications of pressure piling.     

外部条件对玉米淀粉粉尘爆炸特性的影响

为了探明外部条件对玉米淀粉粉尘爆炸特性参数的影响,利用20 L球形爆炸装置进行试验测试,探讨了点火能量及粉尘含水量对粉尘爆炸特性的影响,对比研究了CaCO_3和Al(OH)_3两种惰性介质的抑爆效果。结果表明:随点火能量增加,粉尘最大爆炸压力和最大升压速率呈线性上升,在高质量浓度下,粉尘爆炸压力受点火能量的影响更显著;添加CaCO_3和Al(OH)_3能够降低玉米淀粉的爆炸压力,相对于CaCO_3的物理抑爆,Al(OH)_3的物理-化学抑爆效果更佳;玉米淀粉粉尘的最大爆炸压力及爆炸升压速率随粉尘含水量降低而不断增大。     

Towards an inherently safer bioprocessing industry: A review

The bioprocessing industry is regarded as one of the fastest growing sectors with an estimated compound annual growth rate of 8.6%. The global market for biopharmaceuticals is projected to rise to a market value of USD 727.1 billion by 2025. Due to the unique nature of bioprocessing industries wherein micro-organisms are employed to manufacture the desired products, these processes are prone to additional hazards such as biological hazards and dust explosion amongst others. This necessitates the need to review the existing research in the fields of biotechnology and bioprocessing to reduce/eliminate these hazards and pave the path towards a safer bioprocessing industry. The study involves developing a framework comprising of studying the recent technologies that reduce/eliminate these hazards involved in the bioprocessing industries that include dust explosions, loss of containment of toxic chemicals, loss of containment of biohazard/active product ingredient, fire, and explosion and mapping these technologies with respect to inherent safety principles that include substitution, minimization, moderation and simplification with an overall objective of minimizing the risk associated with bioprocesses and moving towards an inherently safer bioprocessing industry.     

油页岩利用过程粉尘爆炸研究现状及趋势分析

在石油资源日益紧张的形势下,我国油页岩资源的开发利用正得到前所未有的重视,但其利用过程潜在的粉尘爆炸危险性并未引起关注。对国内外有关油页岩粉尘着火、爆炸的文献进行了综述,约旦学者对油页岩粉尘爆炸下限、着火温度及惰化粉尘对下限的影响进行了持续性的研究。国内学者多涉及油页岩利用工艺的研究,只注重页岩油蒸气的爆炸风险,多采用经验公式的方法进行分析,具有较大的局限性。根据爆炸风险控制原理,提出了油页岩粉尘防爆安全需要进一步进行的基础研究工作,突出了加强油页岩粉尘和蒸气杂混物爆炸机理研究的重要性。     

粉尘爆炸特征和预防措施探讨

随着现代工业的发展,粉末技术得到了广泛应用,使得粉末产物日益增多.许多粉体加工企业对粉体的相关危害知识没有深刻的认识,这些物质在安全生产、储存、运输和应用过程中,安全管理比较混乱,没有做到很好的防护,缺乏必要的防火防爆设施,再加上操作人员思想上的麻痹大意.粉尘爆炸的危险性大大增加,粉尘爆炸的事故也频繁发生.粉尘爆炸具有很强的破坏力,往往造成重大人员伤亡和严重损失,已经越发成为工业安全不可忽视的重要问题.本文从粉尘爆炸的基本特征出发,论述了粉尘爆炸的机理、条件、特点.根据粉尘爆炸需要的条件,从可燃物、助燃物和点火源三个方面,提出了在实际生产中,预防粉尘爆炸的一些具体措施,以期指导安全生产.     

Dustiness in workplace safety and explosion protection – Review and outlook

Behavior of dust/air mixtures is very complex and difficult to predict since it depends on material properties as well as boundary conditions. Without other influences airborne particles deposit due to gravity but the time it takes for total deposition as well as easiness of resurrection depends very much on the specific dust sample and the boundary conditions. It still lacks a complete understanding of all interacting reasons and one approach is using experimentally determined characteristics, one is named dustiness.Dustiness is the tendency of dust to form clouds and to stay airborne. Dustiness is determined with two basic principles, which are light attenuation and ratio of filled-in and measured mass. Assessment of dustiness of industrial powders has been done for a long time regarding work place safety. Dustiness is used there to determine inhalable fraction and to evaluate health risks. Lately it became interesting in dust explosion protection as well. Dustiness could be used to optimize determination of zones, adaption of venting area and/or for positioning of suppression systems.Dustiness can be useful in many ways but is not a physical property of dusts, therefore it depends on material properties such as density, particle size distribution, shape and water content as well as boundary conditions or determination method. This makes it very difficult to compare dustiness for different techniques and apparatuses and determination method as well as results should be considered carefully. This work gives an overview of existing standards, recent research and suggests improvements to the new dustiness as proposed for dust explosion protection.     

基于氧化还原分析的硫化矿尘爆炸压力预测

为探究可应用于生产现场的硫化矿尘爆炸压力预测方法,基于硫化矿尘爆炸反应机理和粉尘引爆试验数据对硫化矿尘的氧化还原成分与其爆炸压力的相关关系进行分析。研究结果表明：硫化矿尘的还原成分指数与其爆炸压力的相关性极高,尤其是与其爆炸压力峰值的相关性系数高达0.993。整合研究结果形成的硫化矿尘爆炸压力和爆炸压力峰值计算和预测模型,可为金属矿山的硫化矿尘爆炸预防提供决策依据。     

Classification of dispersibility for combustible dust based on Hausner ratio

Mixing of combustible dust and oxidant is one of five essential prerequisites in the dust explosion pentagon, requiring that particles originally in mutual contact within the deposits be separated and suspended in the air. However, dust dispersion never proceeds with 100% efficiency, with inevitable particle agglomeration, and an inherent trend toward settling out of suspension. Dispersibility is defined to describe the ease of dispersion of a dust and the tendency of the particulate matter to remain airborne once a dust cloud has been formed. Pioneers made contributions to classify dust dispersibility by introducing dustiness group (DG), dustability index (DI), NIOSH dispersion chamber and in-situ particle size analysis. Issues remained including the difficulty in comparing results from different methods, as well as the availability of some high-tech testing apparatus.This study aims to provide a quick and universal testing method to estimate the dispersion property of combustible dust. A new dispersibility classification was developed based on dimensionless numbers Hausner ratio and Archimedes number. Four dispersibility classes (DCs) were proposed from one to four, with a larger number meaning better dispersibility. Results for more than a dozen dust samples and mixtures thereof showed the new method is useful in dust explosion research. The consistency in classifying dust dispersion properties between the DC method and previous methods was good. Changes in DC well explained our earlier findings on suppressant enhanced explosion parameter (SEEP) phenomenon attributed to the improvement in dust dispersibility. Hausner ratio and Archimedes number, as easily measured parameters, can be quite advantageous to assess dust dispersibility, permitting a proper risk assessment for the formation of explosible dust clouds.     

An optimal level of dust explosion risk management: Framework and application

The current research provides guidance on the prevention and mitigation of dust explosion using a Quantitative Risk Management Framework (QRMF). Using concepts drawn from previous studies, the framework consists of three main steps: (i) a new combined safety management protocol, (ii) the use of DESC (Dust Explosion Simulation Code) and FTA (Fault Tree Analysis) to assess explosion consequences and likelihood, respectively, and (iii) application of the hierarchy of controls (inherent, engineered and procedural safety). QRMF assessment of an industrial case study showed that the original process was at high risk. DESC simulations and Probit equations determined the destructive percentages. FTAs revealed high probabilities of explosion occurrence; in addition, detailed individual and societal risks calculations were made, before and after the framework was applied. Based on the hierarchy of controls technique, the framework showed significant risk reduction to the point where the residual risk was acceptable for the process.     

Preparation and performance of novel APP/NaY–Fe suppressant for coal dust explosion

Coal dust explosion occurs easily in the coal chemical industry. To ensure safety in industrial production, NaY zeolite was used as carrier modified with Fe ions and combined with ammonium polyphosphate (APP) to prepare a novel composite suppressant for coal dust explosion. The explosion suppression performance of novel APP/NaY–Fe suppressant was investigated by flame propagation inhibition experiments. The results show that Fe ion modification can effectively improve the explosion suppression performance. By increasing content, the explosion suppression performance of the explosion suppressant increases. The maximum explosion pressure P_max of coal dust drops to 0.13 MPa when 50 wt% explosion suppressants were added, and the coal dust explosion cannot continue to expand. Complete suppression of explosion could be achieved by adding 66 wt% explosion suppressants. Combined with XRD, SEM and TG results, the explosion suppression mechanism was proposed. The novel explosion suppressant has high thermal stability, good dispersity and its explosion suppression components distribute uniformly. It shows good explosion suppression performance by the synergistic effect among explosion-suppression components.     

五氯硫酚锌盐粉尘爆炸下限浓度的实验研究

五氯硫酚锌盐的一些基本的危险性参数,如燃烧爆炸性能,目前国内外报道极少。笔者采用野外定性燃烧试验、哈特曼管实验及20 L球实验,对该物质粉尘爆炸的危险性进行研究。结果表明,该物质具有燃烧爆炸危险性,但与细小片状铝粉(燃爆危险性很强烈)相比,其粉尘的燃爆危险性很弱。以硅系点火具作为点火源,在20 L爆炸球中测试获得该粉尘爆炸下限浓度约为213 g/m3。根据ISO-6184及VD I-3673等标准,认为该粉尘的爆炸猛烈度为1级。所得结果为该物质的生产及使用安全提供了重要的参考。     

Scenario derivation and consequence evaluation of dust explosion accident based on dynamic Bayesian network

In order to clarify the correlation between the evolution path of dust explosion accidents and emergency decision-making, and to accurately predict the disaster damage levels of various disaster bearing bodies. This paper extracts 56 key scenario elements from four aspects, namely state, answer, goal and environment, based on the analysis of typical dust explosion accident cases. At the same time, a general scenario evolution path of dust explosion accident is constructed. Using fuzzy number set theory and dynamic Bayes joint probability model, the accurate solution of scenario state probability was realized. With the help of accident cases and dynamic Bayes approach, the dust explosion consequence prediction index system and evaluation criteria were constructed, covering factors such as dust explosion intensity, casualties, direct economic losses, equipment damage, building damage, environmental damage and other factors. A polyethylene wax dust explosion accident in a city of China was used to verify the dust explosion accident scenario evolution model and consequences prediction model. The predicted results were in good agreement with the actual damage of various carriers of the accident, which indicated that the model could be used for dust explosion accident prediction and disaster loss prediction. The research results provided reference and technical support for the prediction of dust explosion accident evolution direction, emergency aid measures decision and deployment, disaster damage prediction and evaluation.     

浓度对橡胶粉尘爆炸特性的影响

为了解橡胶粉尘的爆炸危险性,采用20 L球爆炸测试装置对常温常压下、粒径75μm以下的橡胶粉尘在质量浓度50~700 g/m3范围内的爆炸特性进行试验研究,测定其最大爆炸压力及爆炸指数随质量浓度的变化规律,进而对其爆炸危险性程度进行分级。结果表明:橡胶粉尘质量浓度为300 g/m3时,爆炸压力达到最大值0.49MPa;在橡胶粉尘质量浓度为250 g/m3时,爆炸指数达到最大值5.04MPa·m/s,根据ISO 6184粉尘爆炸烈度等级分级标准,其粉尘爆炸危险性分级为St-1级。     

Experimental study on the minimum explosion concentration of anthracite dust: The roles of O2 mole fraction,inert gas and CH4 addition

The explosion characteristics of anthracite coal dust with/without small amount of CH₄ (1.14 vol %) were investigated by using a 20 L spherical explosion apparatus with an emphasis on the roles of oxygen mole fraction and inert gas. Two methods based on overpressure and combustion duration time were used to determine the minimum explosion concentration (MEC) or the lower explosion limit (LEL) of the pure anthracite coal dust and the hybrid coal-methane mixtures, respectively. The experiment results showed that increasing oxygen mole fraction increases the explosion risk of coal dust: with increasing oxygen mole fraction, the explosion pressure (P_ex) and the rate of explosion pressure rise ((dp/dt)_ex)) increase, while MEC decreases. The explosion risk of anthracite dust was found to be lower after replacing N₂ with CO₂, suggesting that CO₂ has a better inhibition effect on explosion mainly due to its higher specific heat. However, the addition of 1.14% CH₄ moderates the inhibition effect of CO₂ and the promotion effect of O₂ on anthracite dust explosion for some extent, increasing explosion severity and reducing the MEC of anthracite dust. For hybrid anthracite/CH₄ mixture explosions, Barknecht's curve was found to be more accurate and conservative than Chatelier's line, but neither are sufficient from the safety considerations. The experimental results provide a certain help for the explosion prevention and suppression in carbonaceous dust industries.     

基于改进云模型-IAHP的涉爆粉尘企业安全风险评估

为了评估涉爆粉尘企业安全风险,克服传统评估过程中数据随机性和模糊性的缺陷,建立了基于云理论和区间层次分析法(IAHP)的涉爆粉尘企业安全风险评估模型。针对粉尘爆炸事故的特点构建涉爆粉尘企业安全风险指标体系,使用云理论为主客观指标赋值,采用IAHP确定各指标权重并引入可能度修正权重结果,基于改进的云合并算法整合计算结果,以综合评估企业粉尘爆炸风险,并将该模型应用于某金属加工企业。研究结果表明:该企业的粉尘爆炸风险处于一般水平,其工人安全意识薄弱、防尘及防爆措施不完善、生产布局和管理不规范等原因导致了该企业的风险,该模型评估结果与实际情况相符,为提高企业安全管理水平提供依据。