Chromium Analysis at a Ferrochrome Smelter,a Chemical Plant and a Refractory Brick Plant

Techniques were developed to sample and analyze the Cr content of participate samples with emphasis on determining the concentration of the carcinogen Cr⁺⁶. Cr⁺⁶ is extracted to alkaline solution and analyzed colorimetrically. Residual particles are extracted with acid solution to remove soluble Cr⁺³, which is determined by atomic absorption spectrometry. This methodology was tested on samples from three diverse types of sources: a ferrochrome smelter, a chemical plant, and a refractory brick plant. Identical quadruplicate samples were collected to determine accuracy and precision of the collection and analysis procedures, and extraction of Cr⁺⁶ and Cr⁺³. A statistical analysis revealed that the precision of Cr⁺⁶ analysis is comparable to that of the particulate mass determination. The stability of Cr⁺⁶ In particulate form and in solution was determined. Size resolved particulate samples were collected to determine the particle size versus the Cr⁺⁶ content. At the ferrochrome smelter and the chemical plant the majority of the Cr⁺⁶ was contained in the respirable particles. The accuracy and completeness of the chemical methods employed were verified by neutron activation analysis, x-ray photoelectron spectroscopy, and scanning electron microscopyenergy dispersive x-ray analysis.     

The World on a Collision Course and the Need for a New Economy

The first part of the paper is an attempt to demonstrate that what we are going through at the present time is not just an economic-financial crisis, but a crisis of humanity. It seems that for the first time in human history several crises converge to simultaneously reach their maximum level of tension. The dominant economic model is to a great degree responsible for the world’s collision course. Hence a number of myths that sustain the model are listed and analyzed. It is argued that a new economy, coherent with the problematiques of the twenty first century, needs urgently to be devised. The second part proposes the foundations for a new economy based on five fundamental postulates that allow the construction of transdisciplinary, holistic, and systemic visions to adequately understand the interdependence of all the elements that sustain life. It is stressed that it is no longer acceptable that Universities still teach economic theories of the nineteenth century in order to tackle twenty first century problems that have no precedence.     

Critical velocity and range of a fire-gas plume in a ventilated tunnel

To protect passengers, personnel and equipment in a tunnel fire, it is important to understand and predict the movements of the hot-gas plume. To estimate the range of a fire plume propagating under the ceiling, a model is presented, that depends on two important parameters, i.e. the energy release rate of the fire and the velocity of the ventilation flow. The theoretical results, concerning the upwind range of the plume, agree favourably with experimental data obtained from eight tunnel fire tests. The theoretical value of the critical ventilation velocity, required to arrest the upwind movement of the fire-gas, agrees well with the corresponding experimental results for a wide range of energy release rates. The influences of air entrainment, friction at the ceiling and the associated heat loss are analysed and the results discussed.     

Transport and transformation of sulfadiazine in soil columns packed with a silty loam and a loamy sand

Concerning the transport of the veterinary antibiotic sulfadiazine (SDZ) little is known about its possible degradation during transport. Also its sorption behaviour is not yet completely understood. We investigated the transport of SDZ in soil columns with a special emphasis on the detection of transformation products in the outflow of the soil columns and on modelling of the concentration distribution in the soil columns afterwards. We used disturbed soil columns near saturation, packed with a loamy sand and a silty loam. SDZ was applied as a 0.57 mg L(-1) solution at a constant flow rate of 0.25 cm h(-1) for 68 h. Breakthrough curves (BTC) of SDZ and its transformation products 4-(2-iminopyrimidin-1(2H)-yl)aniline and 4-hydroxy-SDZ were measured for both soils. For the silty loam we additionally measured a BTC for an unknown transformation product which we only detected in the outflow samples of this soil. After the leaching experiments the (14)C-concentration was quantified in different layers of the soil columns. The transformation rates were low with mean SDZ mass fractions in the outflow samples of 95% for the loamy sand compared to 97% for the silty loam. The formation of 4-(2-iminopyrimidin-1(2H)-yl)aniline appears to be light dependent and did probably not occur in the soils, but afterwards. In the soil columns most of the (14)C was found near the soil surface. The BTCs in both soils were described well by a model with one reversible (kinetic) and one irreversible sorption site. Sorption kinetics played a more prominent role than sorption capacity. The prediction of the (14)C -concentration profiles was improved by applying two empirical models other than first order to predict irreversible sorption, but also these models were not able to describe the (14)C concentration profiles correctly. Irreversible sorption of sulfadiazine still is not well understood.     

Organochlorines and endometriosis: a mini-review

Organochlorines (polychlorinated biphenyls and dioxin-like compounds) are suspected to play a role in the etiopathogenesis of endometriosis. This hypothesis, based on experimental data, has been circulating for years in the scientific community and several epidemiologic surveys have attempted to obtain confirmatory human data. The purpose of this mini-review is to provide an overview of the twelve epidemiological studies that have assessed the relationship between endometriosis and organochlorine exposure. Several studies did not observe a significant association between peritoneal endometriosis and organochlorines. The deep nodular form of endometriosis appears associated with a higher serum level of both dioxin-like compounds and polychlorobiphenyls. The type of control women, the nature of the chemicals measured, and the definition of the disease could modulate the ability to detect the possible relationship between endometriosis and organochlorine exposure.     

Simulation of soil hydrology and establishment of a nitrogen budget of a Mountain Forest

The water fluxes through the mountainous forest ecosystem ‘Mühleggerköpfl’ were simulated by means of the mechanistic soil physical model Hydrus ID. The objective was to set up a nitrogen budget in order to decide if the ecosystem accumulates nitrogen or if nitrogen leaks from the site. The simulated annual loss of N by percolation ranges between 0.4 and 1 g N m⁻² yr⁻ and is smaller than the annual input by bulk and occult deposition, which combines to approx 1.2–1.5 g N m⁻ yr⁻. Obviously the forest soil presently accumulates N. With an N input-rate exceeding the N output, the operationally defined status of N saturation is not yet reached. Comparing the magnitude of the N pool in the soil (several kg N m⁻²) with the rate of the annual increase (a few g N m⁻²yr⁻¹), the process of N saturation is apparently slow.

     

Displacement and sweep efficiencies in a DNAPL recovery test using micellar and polymer solutions injected in a five-spot pattern

Soil washing with micellar solutions is a promising alternative for the remediation of DNAPL source zones. As with any flushing technology, the success of soil washing with micellar solutions depends in a very large part on the ability of the solution to contact the contaminant (sweep efficiency) and then on the efficiency of contaminant removal once this contact is made (displacement efficiency). We report here on a field test where a micellar solution was used to recover a DNAPL in an open five-spot pattern in which polymer solutions were also injected before and after the washing solution to improve sweep efficiency. The washing solution formulation was optimised in the laboratory prior to the test to obtain good dissolution capacity. For a high-concentration and low-volume soil flushing remediation test such as the one performed (0.8 pore volumes of actual washing solution injected), slug sizing of the washing solution is critical. It was evaluated by an analytical solution. In a five-spot pattern, the displacement efficiency of the washing solution was observed to vary in the porous medium as a function of the radial distance from the injection well because: (1) the volume of the washing solution flowing through a section of the test cell changes (maximum close to the injection well and minimal at the pumping wells); (2) the in situ velocity changes (maximum at the wells and minimum between the wells) and; (3) the contact time of the washing solution with the NAPL changes as a function of the distance from the injection well. The relative importance of the recovery mechanisms, mobilisation and dissolution, was also observed to vary in the test cell. The reduced velocity increased the contact time of the washing solution with the DNAPL enhancing its dissolution, but the decrease of the capillary number caused less mobilisation. The washing process is much more extensive around the injection well. The use of an injection-pumping pattern allowing a complete sweep of the remediated area is essential. Following a comprehensive characterisation, modeling is an efficient tool to design the injection-pumping scheme and to optimise injection and pumping rates providing the best areal sweep. The vertical sweep can be controlled by using a polymer solution (Xanthan gum). The polymer solution also has a positive effect on front stability between the solutions injected. The injection rate of the polymer solution that follows the washing solution must be kept minimal initially to prevent dilution of the washing solution by fingering.     

Particulate matter in the indoor and outdoor air of a gymnasium and a fronton

An indoor/outdoor monitoring programme of PM₁₀ was carried out in two sports venues (a fronton and a gymnasium). Levels always below 50 μg m^?3 were obtained in the fronton and outdoor air. Due to the climbing chalk and the constant process of resuspension, concentrations above 150 μg m^?3 were registered in the gymnasium. The chalk dust contributed to CO₃ ^2? concentrations of 32?±?9.4 μg m^?3 in this sports facility, which represented, on average, 18 % of the PM₁₀ mass. Here, the carbonate levels were 128 times higher than those registered outdoors. Much lower concentrations, around 1 μg m^?3, were measured in the fronton. The chalk dust is also responsible for the high Mg²⁺ concentrations in the gym (4.7?±?0.89 μg m^?3), unfolding a PM₁₀ mass fraction of 2.7 %. Total carbon accounted for almost 30 % of PM₁₀ in both indoor spaces. Aerosol size distributions were bimodal and revealed a clear dependence on physical activities and characteristics of the sports facilities. The use of climbing chalk in the gymnasium contributed significantly to the coarse mode. The average geometric mean diameter, geometric standard deviation and total number of coarse particles were 0.77 μm, 2.79 cm^?3 and 28 cm^?3, respectively.     

A vehicle emissions system using a car simulator and a geographical information system: Part 1--System description and testing

A methodology for estimating vehicular emissions comprising a car simulator, a basic traffic model, and a geographical information system is capable of estimating vehicle emissions with high time and space resolution. Because of the extent of the work conducted, this article comprises two sections: In Part 1 of this work, we describe the system and its components and use examples for testing it. In Part 2 we will study in more detail the emissions of the sample fleet using the system and will make comparisons with another emission model. The experimental data for the car simulator is obtained using on-board measuring equipment and laboratory Fourier transform IR (FTIR) measurements with a dynamometer following typical driving cycles. The car simulator uses this data to generate emission factors every second. These emission factors, together with information on car activity and velocity profiles of highways and residential and arterial roads in Mexico City in conjunction with a basic traffic model, provide emissions per second of a sample fleet. A geographical information system is used to localize these road emissions.     

基于新型絮凝剂和专用絮凝反应器的垃圾渗滤液处理中试研究

针对实验室所得垃圾渗滤液专用铁镁铝复合絮凝剂配方进行了批量扩大化生产,设计开发了中试专用絮凝反应设备,在垃圾填埋现场进行了絮凝中试实验。研究结果表明,最佳搅拌速度为170 r/min,最佳投药量为20%,COD去除率大于50%,BOD去除率大于30%,渗滤液可生化性由0.4提高到0.65,色度去除率约70%～80%,重金属去除率大于80%,优于同类常规市售絮凝剂聚铁、聚铝、聚铝铁;垃圾渗滤液处理专用絮凝反应器能满足设计开发要求,具有处理效果好、结构紧凑、多功能、自动化程度高、方便移动适于现场实验等特点;为适应渗滤液絮凝反应剧烈、产生大量泡沫、影响固液分离效果的特点,专用絮凝反应器固液分离部分的细部尺寸应进一步优化调整。     

Fog as a Fresh-Water Resource: Overview and Perspectives

The collection of fog water is a simple and sustainable technology to obtain fresh water for afforestation, gardening, and as a drinking water source for human and animal consumption. In regions where fresh water is sparse and fog frequently occurs, it is feasible to set up a passive mesh system for fog water collection. The mesh is directly exposed to the atmosphere, and the foggy air is pushed through the mesh by the wind. Fog droplets are deposited on the mesh, combine to form larger droplets, and run down passing into a storage tank. Fog water collection rates vary dramatically from site to site but yearly averages from 3 to 10 l m⁻² of mesh per day are typical of operational projects. The scope of this article is to review fog collection projects worldwide, to analyze factors of success, and to evaluate the prospects of this technology.     

Treelines Will be Understood Once the Functional Difference Between a Tree and a Shrub Is

Trees are taller than shrubs, grasses, and herbs. What is the disadvantage of being tall so that trees are restricted to warmer regions than low stature life forms? This article offers a brief review of the current state of biological treeline theory, and then explores the significance of tallness from a carbon balance, freezing resistance, and microclimatological perspective. It will be argued that having of a woody stem is neither a burden to the carbon balance nor does it add to the risk of freezing damage. The physiological means of trees to thrive in cold climates are similar to small stature plants, but due to their size, and, thus, closer aerodynamic coupling to air circulation, trees experience critically low temperatures at lower elevation and latitude than smaller plants. Hence, trees reach a limit at treeline for physical reasons related to their stature.     

Treelines will be understood once the functional difference between a tree and a shrub is

Trees are taller than shrubs, grasses, and herbs. What is the disadvantage of being tall so that trees are restricted to warmer regions than low stature life forms? This article offers a brief review of the current state of biological treeline theory, and then explores the significance of tallness from a carbon balance, freezing resistance, and microclimatological perspective. It will be argued that having of a woody stem is neither a burden to the carbon balance nor does it add to the risk of freezing damage. The physiological means of trees to thrive in cold climates are similar to small stature plants, but due to their size, and, thus, closer aerodynamic coupling to air circulation, trees experience critically low temperatures at lower elevation and latitude than smaller plants. Hence, trees reach a limit at treeline for physical reasons related to their stature.     

Microplastic pollution,a threat to marine ecosystem and human health: a short review

Human populations are using oceans as their household dustbins, and microplastic is one of the components which are not only polluting shorelines but also freshwater bodies globally. Microplastics are generally referred to particles with a size lower than 5 mm. These microplastics are tiny plastic granules and used as scrubbers in cosmetics, hand cleansers, air-blasting. These contaminants are omnipresent within almost all marine environments at present. The durability of plastics makes it highly resistant to degradation and through indiscriminate disposal they enter in the aquatic environment. Today, it is an issue of increasing scientific concern because these microparticles due to their small size are easily accessible to a wide range of aquatic organisms and ultimately transferred along food web. The chronic biological effects in marine organisms results due to accumulation of microplastics in their cells and tissues. The potential hazardous effects on humans by alternate ingestion of microparticles can cause alteration in chromosomes which lead to infertility, obesity, and cancer. Because of the recent threat of microplastics to marine biota as well as on human health, it is important to control excessive use of plastic additives and to introduce certain legislations and policies to regulate the sources of plastic litter. By setup various plastic recycling process or promoting plastic awareness programmes through different social and information media, we will be able to clean our sea dustbin in future.     

Shine a light: Under-ice light and its ecological implications in a changing Arctic Ocean

The Arctic marine ecosystem is shaped by the seasonality of the solar cycle, spanning from 24-h light at the sea surface in summer to 24-h darkness in winter. The amount of light available for under-ice ecosystems is the result of different physical and biological processes that affect its path through atmosphere, snow, sea ice and water. In this article, we review the present state of knowledge of the abiotic (clouds, sea ice, snow, suspended matter) and biotic (sea ice algae and phytoplankton) controls on the underwater light field. We focus on how the available light affects the seasonal cycle of primary production (sympagic and pelagic) and discuss the sensitivity of ecosystems to changes in the light field based on model simulations. Lastly, we discuss predicted future changes in under-ice light as a consequence of climate change and their potential ecological implications, with the aim of providing a guide for future research.     

Diphenylamine and derivatives in the environment: a review

Diphenylamine (DPA) is a compound from the third European Union (EU) list of priority pollutants. It was assigned by the EU to Germany to assess and control its environmental risks. DPA and derivatives are most commonly used as stabilizers in nitrocellulose-containing explosives and propellants, in the perfumery, and as antioxidants in the rubber and elastomer industry. DPA is also widely used to prevent post-harvest deterioration of apple and pear crops. DPA is a parent compound of many derivatives, which are used for the production of dyes, pharmaceuticals, photography chemicals and further small-scale applications. Diphenylamines are still produced worldwide by the chemical industries. First reports showed that DPA was found in soil and groundwater. Some ecotoxicological studies demonstrated the potential hazard of various diphenylamines to the aquatic environment and to bacteria and animals. Studies on the biodegradability of DPA and its derivatives are very sparse. Therefore, further investigation is required to determine the complete dimension of the potential environmental hazard and to introduce possible (bio)remediation techniques for sites that are contaminated with this class of compounds. This is the first detailed review on DPA and some derivatives summarizing their environmental relevance as it is published in the literature so far and this review will recommend conducting further research in the future.     

Pools and fluxes of organic matter in a boreal landscape: implications for a safety assessment of a repository for nuclear waste

To provide information necessary for a license application for a deep repository for spent nuclear fuel, the Swedish Nuclear Fuel and Waste Management Co is carrying out site investigations, including extensive studies of different parts of the surface ecosystems, at two sites in Sweden. Here we use the output from detailed modeling of the carbon dynamics in the terrestrial, limnic and marine ecosystems to describe and compare major pools and fluxes of organic matter in the Simpevarp area, situated on the southeast coast of Sweden. In this study, organic carbon is used as a proxy for radionuclides incorporated into organic matter. The results show that the largest incorporation of carbon into living tissue occurs in terrestrial catchments. Carbon is accumulated in soil or sediments in all ecosystems, but the carbon pool reaches the highest values in shallow near-land marine basins. The marine basins, especially the outer basins, are dominated by large horizontal water fluxes that transport carbon and any associated contaminants into the Baltic Sea. The results suggest that the near-land shallow marine basins have to be regarded as focal points for accumulation of radionuclides in the Simpevarp area, as they receive a comparatively large amount of carbon as discharge from terrestrial catchments, having a high NPP and a high detrital accumulation in sediments. These focal points may constitute a potential risk for exposure to humans in a future landscape as, due to post-glacial land uplift, previous accumulation bottoms are likely to be used for future agricultural purposes.     

Radionuclide Transport and Uptake in Coastal Aquatic Ecosystems: A Comparison of a 3D Dynamic Model and a Compartment Model

In safety assessments of underground radioactive waste repositories, understanding radionuclide fate in ecosystems is necessary to determine the impacts of potential releases. Here, the reliability of two mechanistic models (the compartmental K-model and the 3D dynamic D-model) in describing the fate of radionuclides released into a Baltic Sea bay is tested. Both are based on ecosystem models that simulate the cycling of organic matter (carbon). Radionuclide transfer is linked to adsorption and flows of carbon in food chains. Accumulation of Th-230, Cs-135, and Ni-59 in biological compartments was comparable between the models and site measurements despite differences in temporal resolution, biological state variables, and partition coefficients. Both models provided confidence limits for their modeled concentration ratios, an improvement over models that only estimate means. The D-model enables estimates at high spatio-temporal resolution. The K-model, being coarser but faster, allows estimates centuries ahead. Future developments could integrate the two models to take advantage of their respective strengths.     

Large carnivores and human safety: a review

Attacks by large carnivores on humans can occasionally help to generate significant resistance to carnivore conservation efforts. We have reviewed research addressing concerns for human safety in large carnivore conservation, and have evaluated statements about the frequencies and causes of attacks based on our findings concerning i) existing data on the number of attacks by large carnivores in various parts of the world; ii) information systems documenting details of attacks; and iii) research that provides credible advice on what to do when encountering a large carnivore, to minimize the likelihood of being attacked. We conclude that little information exists for any of these criteria and what is available is often inadequate to determine the frequency of attacks, their causes and how to avoid them. We suggest that information systems, including database(s) on attacks and encounters, should be established for large carnivore conservation efforts, to supply information and to answer future requests for this information.