Delayed association of acute particulate matter 2.5 air pollution exposure with loss of complexity in cardiac rhythm dynamics: insight from detrended fluctuation analysis

Environmental Science and Pollution Research - There is a delayed (lag 1 to 2 days) correlation between acute PM 2.5 (particulate matter <?2.5 μm in aerodynamic...     

Effects of zinc and iron on the abundance of Microcystis in Lake Taihu under green light and turbulence conditions

Environmental Science and Pollution Research - Trace element is one of the important factors affecting the growth of Microcystis. The effects of zinc (0.4 mg/L) and iron (2 mg/L)...     

Settleability and dewaterability of sewage sludge with modified diatomite

Environmental Science and Pollution Research - In this study, cationic polyacrylamide (CPAM)-modified diatomite and cetyl trimethyl ammonium bromide (CTAB)-modified...     

Visible-light-responsive photocatalytic inactivation of ofloxacin-resistant bacteria by rGO modified g-C3N4

Environmental Science and Pollution Research - The visible light responsive graphitic nitride (g-C3N4) mediated photocatalysis has drawn extensive attention in water treatment field....     

How does “the Belt and Road” and the Sino-US trade conflict affect global and Chinese CO2 emissions?

Environmental Science and Pollution Research - In the context of the rapid development of the Belt and Road (B&R) Initiative, the continuous transfer of Sino-US trade to the B&R...     

Manganese-modified biochar for highly efficient sorption of cadmium

Environmental Science and Pollution Research - In this study, corn stalk was modified by manganese (Mn) before (MBC1) and after (MBC2) pyrolysis at different temperatures (400~600 °C)...     

Impact of economic policy uncertainty,energy intensity,technological innovation and R&D on CO2 emissions: evidence from a panel of 18 developed economies

Environmental Science and Pollution Research - This study examines the impact of economic policy uncertainty (EPU) and ecological innovation on carbon (CO2) emissions in a panel of 18...     

An Automatic Particle Sampler with Beta Gauging

Performance test results and operating characteristics of the Wedding & Associates' (W&A) PM10 Beta Gauge Automated Particle Sampler (Sampler), a U.S. EPA Designated Equivalent Method (Designation No. EQPM-0391-081), are reported. The custom, computer-controlled Sampler utilizes BETASOFT?, a multitasking operating system running the high level language application program. The Sampler employs the Wedding PM10 Inlet (Inlet) and Critical Flow Device (CFD). Analysis, calculations and mechanical control are achieved by use of analog sensing and digital logic. The development and testing program included wind tunnel and field tests to verify experimentally its conformity with theoretical calculations of the relationship of collected mass to 3- particle penetration. Use of a ¹⁴C source and a fast-response detector leads to high sensitivity and precision. The instrument has been tested against the Wedding Reference Method Sampler (Reference Method). The 24-hour means of mass concentration values determined by the Sampler, regressed against 24-hour samples collected with the Reference Method, yielded slopes within 1.2 percent of unity, with intercepts less than 1.5 μg/m³ and coefficients of determination (R²) of 0.99 or higher. Resolution is less than 3 μg/m³.     

The use of sedimentary metal data in predictive modelling of estuarine contamination,assessment of environmental condition and pollutant source identification (Narrabeen Lagoon,Sydney, Australia)

Environmental Science and Pollution Research - Narrabeen Lagoon is recognized as an Intermittently Closed and Open Lake or Lagoon (ICOLL) and is the largest coastal lagoon (2.2 km2) in the...     

Structural and sensing properties of ethanol gas using Pd-doped SnO2 thick film gas sensor

Environmental Science and Pollution Research - In the present study, we fabricate undoped and 1 wt% palladium (Pd)-doped tin oxide (SnO2) films were deposited on alumina substrate using...     

Physiological mechanisms of a wetland plant (Echinodorus osiris Rataj) to cadmium detoxification

Environmental Science and Pollution Research - Physiological responses of Echinodorus osiris Rataj plant under cadmium (Cd) stress (5 and 15 mg L?1) were studied by...     

Characterization of ammonia remover Bacillus albus (ASSF01) in terms of biofilm-forming ability with application in aquaculture effluent treatment

Environmental Science and Pollution Research - Presence of higher concentration of ammonia (> 0.5 mg/L) as well as nitrite (> 0.2 mg/L) in aquaculture environment create difficulties...     

Evaluating the performance and intellectual structure of construction and demolition waste research during 2000–2016

Environmental Science and Pollution Research - Construction and demolition (C&D) waste diminishes scarce land resources and endangers human health and the surrounding environment....     

An Assessment of Source Contributions to Ambient Aerosols in Central Taiwan

Ambient aerosols were sampled at three selected sites in the coastal region of central Taiwan to obtain composition data for use in receptor modeling. All the samples were analyzed for 20 elements with an x-ray fluorescence spectrometer. The mass percentage of sulfates in particle samples was determined by ion chromatography, and mass percentages of elemental carbon (EC) and organic carbon (OC) were determined by an elemental analyzer.

Because the three sampling sites were located within 25 km of each other, the average chemical compositions were similar for particle samples taken at the three sites on the same day. However, the variation in composition from day to day was significantly influenced by wind direction and change in local sources, such as the burning of agricultural wastes. The abundant species in the coarse fraction (2.5-10 µm) were Al (0.5-4.0 µg/m³), Cl (0.1-4.8 µg/m³), Ca (0.2-3.4 µg/m³), Fe (0.2-2.8 µg/ m³), and K (0.1-1.4 µg/m³), while the abundant species in the fine fraction (<2.5 µm) were S (0.3-3.5 µg/m³), Cl (0.01-1.9 µg/ m³), K (0.04-0.98 µg/m³), organic carbon (0.01-10.5 µg/m³), elemental carbon (0-10.7 µg/m³), and sulfates (1.2-15.7 µg/m³).

Calculations for source apportionment were carried out using the CMB7 software developed by the U.S. Environmental Protection Agency (EPA). The main sources for the coarse fraction of ambient aerosols in the region were found to be marine aerosol, coal and fuel oil combustion, burning of agricultural wastes, and paved road dust. The main sources for the fine fraction were burning of agricultural wastes, diesel exhaust, coal and oil combustion, and sulfates. Source apportionment for the fine fraction was relatively sensitive to the types of sources selected for calculations and the compositions of the sources. The problem can be ameliorated by careful examination of possible sources and by use of local source profiles.     

Green research and development activities and SO2 intensity: an analysis for China

Environmental Science and Pollution Research - Carrying out domestic research and development (R&D) activities can improve environmental performance. However, extant studies have not...     

Modeling runoff-sediment influx responses to alternative BMP interventions in the Gojeb watershed,Ethiopia, using the SWAT hydrological model

Environmental Science and Pollution Research - The Soil & Water Assessment Tool (SWAT) has been calibrated over a 33-year period to evaluate the Gojeb watershed’s hydrological...     

The occurrence of microplastic contamination in littoral sediments of the Persian Gulf,Iran

Environmental Science and Pollution Research - Microplastics (MPs; <5 mm) in aquatic environments are an emerging contaminant of concern due to their possible ecological and...     

Do higher education research and development expenditures affect environmental sustainability? New evidence from Chinese provinces

Environmental Science and Pollution Research - Even though higher education R&D expenditures (HEEXP) are important determinants of economic growth that facilitate science, technology, new...     

An Assessment of Source Contributions to Ambient Aerosols in Central Taiwan

Ambient aerosols were sampled at three selected sites in the coastal region of central Taiwan to obtain composition data for use in receptor modeling. All the samples were analyzed for 20 elements with an x-ray fluorescence spectrometer. The mass percentage of sulfates in particle samples was determined by ion chromatography, and mass percentages of elemental carbon (EC) and organic carbon (OC) were determined by an elemental analyzer.

Because the three sampling sites were located within 25 km of each other, the average chemical compositions were similar for particle samples taken at the three sites on the same day. However, the variation in composition from day to day was significantly influenced by wind direction and change in local sources, such as the burning of agricultural wastes. The abundant species in the coarse fraction (2.5&#x0002D;10 µm) were Al (0.5&#x0002D;4.0 µg/m³), Cl (0.1&#x0002D;4.8 µg/m³), Ca (0.2&#x0002D;3.4 µg/m³), Fe (0.2&#x0002D;2.8 µg/ m³), and K (0.1&#x0002D;1.4 µg/m³), while the abundant species in the fine fraction (<2.5 µm) were S (0.3&#x0002D;3.5 µg/m³), Cl (0.01&#x0002D;1.9 µg/ m³), K (0.04&#x0002D;0.98 µg/m³), organic carbon (0.01&#x0002D;10.5 µg/m³), elemental carbon (0&#x0002D;10.7 µg/m³), and sulfates (1.2&#x0002D;15.7 µg/m³).

Calculations for source apportionment were carried out using the CMB7 software developed by the U.S. Environmental Protection Agency (EPA). The main sources for the coarse fraction of ambient aerosols in the region were found to be marine aerosol, coal and fuel oil combustion, burning

of agricultural wastes, and paved road dust. The main sources for the fine fraction were burning of agricultural wastes, diesel exhaust, coal and oil combustion, and sulfates. Source apportionment for the fine fraction was relatively sensitive to the types of sources selected for calculations and the compositions of the sources. The problem can be ameliorated by careful examination of possible sources and by use of local source profiles.