Additional disturbances as a beneficial tool for restoration of post-mining sites: a multi-taxa approach

Open interior sands represent a highly threatened habitat in Europe. In recent times, their associated organisms have often found secondary refuges outside their natural habitats, mainly in sand pits. We investigated the effects of different restoration approaches, i.e. spontaneous succession without additional disturbances, spontaneous succession with additional disturbances caused by recreational activities, and forestry reclamation, on the diversity and conservation values of spiders, beetles, flies, bees and wasps, orthopterans and vascular plants in a large sand pit in the Czech Republic, Central Europe. Out of 406 species recorded in total, 112 were classified as open sand specialists and 71 as threatened. The sites restored through spontaneous succession with additional disturbances hosted the largest proportion of open sand specialists and threatened species. The forestry reclamations, in contrast, hosted few such species. The sites with spontaneous succession without disturbances represent a transition between these two approaches. While restoration through spontaneous succession favours biodiversity in contrast to forestry reclamation, additional disturbances are necessary to maintain early successional habitats essential for threatened species and open sand specialists. Therefore, recreational activities seem to be an economically efficient restoration tool that will also benefit biodiversity in sand pits.     

Evaluation of a sustainable remediation option: Beneficial reuse of petroleum-contaminated sediment as an energy source

The characteristics of petroleum-contaminated sediment (PCS) have been evaluated to assess whether the practice of its beneficial reuse as a sole or supplemental energy source is sustainable relative to other sediment remediation options such as monitored natural recovery (MNR), capping, or off-site disposal. Some of these remediation options for PCS are energy-intensive and/or require land utilization. The energy and compositional analysis results indicate a low carbon content (15–17%(wt)) and corresponding low energy values of 5,200 kJ/kg (2,200 Btu/lb) to 5,600 kJ/kg (2,400 Btu/lb). However, given other decision-making criteria, the sediment may contain enough value to be added as a supplemental fuel given that it is normally considered a waste product and is readily available.

The thermogravimetric profiles obtained under both combustion and pyrolytic conditions showed that the sulfur contents were comparable to typical low sulfur bituminous or lignite coals found in the United States, and most of the volatiles could be vaporized below 750°C. The heavy metal concentrations determined before and after combustion of the PCS indicated that further engineering controls may be required for mercury, arsenic, and lead. Due to the potential for reduction of public health and environmental threats, potential economic savings, and conservation of natural resources (petroleum and land), removal of PCS by dredging and beneficial reuse as a supplemental fuel clearly has merit to be considered as a sustainable remediation option.

Implications: This study will provide a logical evaluation process to determine whether petroleum-contaminated sediment can be reused as an energy source. The energy and emissions values were determined and evaluated whether the sediment could be combusted for viable and sustainable use, considering several factors pertinent to evaluate in the remediation decision process. Various analysis methods were employed to determine elemental compositions, heating values, thermal and emission characteristics. This evaluation process may be used as a general methodology for the determination of petroleum-contaminated sediment as a supplemental fuel that may have merit to be considered as a sustainable remediation option.     

Home transport and wastage: environmentally relevant household activities in the life cycle of food

In environmental systems analysis of food production systems, the consumer phase (home transport, cooking, storing, and wastage) is an important contributor to the total life-cycle environmental impact. However, households are the least investigated part of the food chain. Information gathering about households involves difficulties; the number of households is large, and food-related activities are embedded in other household activities. In cooperation between researchers from environmental systems analysis and consumer research, Swedish households were surveyed by questionnaire, diary, and interviews. Data on home transport of food and wastage were collected. The average weekly driving distance was 28 to 63 km per household, depending on how trips made in conjunction with other errands are allocated. The wastage of prepared food ranged between 0 and 34% for different food categories, and wastage from storing between 0 and 164% (more food was discarded, e.g. by cleaning out a cupboard, than consumed). In both cases dairy products scored highest.     

Assessment models and dynamic variables for dynamic life cycle assessment of buildings: a review

Environmental Science and Pollution Research - Life cycle assessment (LCA) is widely used to quantify the environmental performance of buildings. Recently, the potential temporal variations in the...     

Application of life cycle assessment for hospital solid waste management: A case study

This study was meant to determine environmental aspects of hospital waste management scenarios using a life cycle analysis approach. The survey for this study was conducted at the largest hospital in a major city of Pakistan. The hospital was thoroughly analyzed from November 2014 to January 2015 to quantify its wastes by category. The functional unit of the study was selected as 1 tonne of disposable solid hospital waste. System boundaries included transportation of hospital solid waste and its treatment and disposal by landfilling, incineration, composting, and material recycling methods. These methods were evaluated based on their greenhouse gas emissions. Landfilling and incineration turned out to be the worst final disposal alternatives, whereas composting and material recovery displayed savings in emissions. An integrated system (composting, incineration, and material recycling) was found as the best solution among the evaluated scenarios. This study can be used by policymakers for the formulation of an integrated hospital waste management plan.

Implications: This study deals with environmental aspects of hospital waste management scenarios. It is an increasing area of concern in many developing and resource-constrained countries of the world. The life cycle analysis (LCA) approach is a useful tool for estimation of greenhouse gas emissions from different waste management activities. There is a shortage of information in existing literature regarding LCA of hospital wastes. To the best knowledge of the authors this work is the first attempt at quantifying the environmental footprint of hospital waste in Pakistan.     

LCA of tomato greenhouse production using spatially differentiated life cycle impact assessment indicators: an Albanian case study

The increasing attention to agricultural exports and sustainability issues is driving a surge of interest in the life cycle assessment (LCAs) of greenhouse crop production in Albania. Meanwhile, most of the reported agricultural LCAs tend to be generic without considering regionalized environmental sensitivities. In this study, ReCiPe 2016, covering 18 midpoint indicators and 3 endpoint indicators was used to generate a full-fledged cradle-to-farm gate LCA of greenhouse tomatoes in a typical Albanian farm including spatial differentiation and indicators not covered by contemporary LCAs. The most important midpoint categories per 1 ha identified from foreground–background analysis were global warming (2660.4 kg CO2-eq), stratospheric ozone depletion (0.0308 kg CFC11-eq), particulate matter formation (7.99 kg PM2.5-eq), human health and ecosystem ozone formation (8.47 and 14.95 kg NOx-eq), water consumption (2293.23 m3), and terrestrial acidification (42.28 kg SO2-eq). The application of spatial differentiation resulted in higher impacts with about 21% for particulate matter formation, 12% for human health ozone formation, 134% for ecosystem ozone formation, 19% for terrestrial acidification, and 13% for water consumption. The impacts primarily originated from nitrogen-based fertilizer emissions and diesel fuel with the origin of the impact from nitrous oxide (N2O), ammonia volatilization (NH3), nitrogen oxides (NOx), and non-methane volatile organic compounds (NMVOCs). Water consumption was dominated by irrigation water use. Overall, at the endpoint level, 9% and 24% less cumulative damage to human health and ecosystem quality were calculated with respect to the site-generic analysis primarily from the cause-and-effect chain of water consumption (mainly lower water stress index). This affirms the importance of regional considerations in LCA calculations to reflect the impacts accordingly (i.e., the magnitude of impacts, the most relevant midpoint categories, and their relevance on endpoint level) and increase the possibility of making correct conclusions and sub-optimizations, i.e., increase the discriminating power of LCA.     

Integrated multitrophic aquaculture (IMTA) as an environmentally friendly system for sustainable aquaculture: functionality,species, and application of biofloc technology (BFT)

Environmental Science and Pollution Research - Aquaculture is one of the fastest-growing industries in the world, and its prominent role has been proven in supplying food for the growing world...     

Phytoremediation as a management option for contaminated sediments in tidal marshes, flood control areas and dredged sediment landfill sites

Background, aim and scope  

Polluted sediments in rivers may be transported by the river to the sea, spread over river banks and tidal marshes or managed, i.e. actively dredged and disposed of on land. Once sedimented on tidal marshes, alluvial areas or control flood areas, the polluted sediments enter semi-terrestrial ecosystems or agro-ecosystems and may pose a risk. Disposal of polluted dredged sediments on land may also lead to certain risks. Up to a few years ago, contaminated dredged sediments were placed in confined disposal facilities. The European policy encourages sediment valorisation and this will be a technological challenge for the near future. Currently, contaminated dredged sediments are often not valorisable due to their high content of contaminants and their consequent hazardous properties. In addition, it is generally admitted that treatment and re-use of heavily contaminated dredged sediments is not a cost-effective alternative to confined disposal. For contaminated sediments and associated disposal facilities used in the past, a realistic, low cost, safe, ecologically sound and sustainable management option is required. In this context, phytoremediation is proposed in the literature as a management option. The aim of this paper is to review the current knowledge on management, (phyto)remediation and associated risks in the particular case of sediments contaminated with organic and inorganic pollutants.     

Performance analysis and life cycle greenhouse gas emission assessment of an integrated gravitational-flow wastewater treatment system for rural areas

Environmental Science and Pollution Research - Due to the lack of appropriate wastewater treatment facility in rural areas, the discharging of wastewater without sufficient treatment results in...     

Applying waste management scenarios in the Peloponnese region in Greece: a critical analysis in the frame of life cycle assessment

The aim of this paper is to apply life cycle assessment in the waste management sector, in order to compare the environmental performance of different waste management methods. The methods that are studied are: landfilling, aerobic and anaerobic biological treatment, incineration and recycling, focusing on mass and energy balances and the environmental performance of each applied scenario. The Peloponnese Region in Greece was selected as a case for the application of this methodology and more specifically its largest municipalities, where a significant amount of waste is presented. The conducted LCA study proves the necessity of the adoption of an integrated waste management system and indicates its principal objectives by measuring environmental impacts. Thermal scenario contributes significant to the mitigation on the Greenhouse Gases. On the other hand, separation at source and recycling practices provides significant benefits to the abiotic depletion impact.     

Toxicity of o,p'-DDE to medaka d-rR strain after a one-time embryonic exposure by in ovo nanoinjection: an early through juvenile life cycle assessment

The toxicity of o,p'-DDE (1,1-dichloro-2-(p-chlorophenyl)-2-(o-chlorophenyl) ethylene) was evaluated in embryos of medaka (Oryzias latipes) following a one time exposure via nanoinjection. Medaka eggs (early gastrula) were injected with 0.5 nl of triolein (vehicle control) or 0.5 nl of 4 graded doses (0.0005-0.5 ng/egg) of o,p'-DDE in triolein. Embryos were allowed to develop, and fry were reared. Embryonic survival was monitored daily during the first 10 d until hatching and thereafter, on a weekly basis until day 59, at which time the fish were monitored for sexual maturity until day 107. In general, o,p'-DDE caused a dose- and time-dependent mortality. No changes in mortality were observed between the last two time points (day 38 and 59, respectively), and hence a 59 day-LD50 of 346 ng o,p'-DDE/egg was derived from the linear dose-response relationship. Prior to late stage death, only isolated cases of cardiovascular lesions and spinal deformities were observed, but were not dose-dependent. The lowest observable adverse effect level (LOAEL), based on upper 95% CI for regression line=0.0018 mg/kg, and the LOAEL based on exposure doses=0.5 mg/kg. Likewise, the no observable adverse effect level (NOAEL) based on linear extrapolation to 100% survival=0.0000388 mg/kg, while the NOAEL based on exposure doses=0.05 mg/kg. The nanoinjection medaka model has potential in the study of hormonally active compounds in the environment.     

Benefits of clean development mechanism application on the life cycle assessment perspective: a case study in the palm oil industry

This study performed an assessment on the beneficial of the Clean Development Mechanism (CDM) application on waste treatment system in a local palm oil industry in Malaysia. Life cycle assessment (LCA) was conducted to assess the environmental impacts of the greenhouse gas (GHG) reduction from the CDM application. Calculations on the emission reduction used the methodology based on AM002 (Avoided Wastewater and On-site Energy Use Emissions in the Industrial Sector) Version 4 published by United Nations Framework Convention on Climate Change (UNFCC). The results from the studies showed that the introduction of CDM in the palm oil mill through conversion of the captured biogas from palm oil mill effluent (POME) treatment into power generation were able to reduce approximate 0.12 tonnes CO2 equivalent concentration (tCO2e) emission and 30 kW x hr power generation per 1 tonne of fresh fruit bunch processed. Thus, the application of CDM methodology on palm oil mill wastewater treatment was able to reduce up to 1/4 of the overall environment impact generated in palm oil mill.     

Cork stoppers as an effective sorbent for water treatment: the removal of mercury at environmentally relevant concentrations and conditions

The technical feasibility of using stopper-derived cork as an effective biosorbent towards bivalent mercury at environmentally relevant concentrations and conditions was evaluated in this study. Only 25 mg/L of cork powder was able to achieve 94 % of mercury removal for an initial mercury concentration of 500 μg/L. It was found that under the conditions tested, the efficiency of mercury removal expressed as equilibrium removal percentage does not depend on the amount of cork or its particle size, but is very sensitive to initial metal concentration, with higher removal efficiencies at higher initial concentrations. Ion exchange was identified as one of the mechanisms involved in the sorption of Hg onto cork in the absence of ionic competition. Under ionic competition, stopper-derived cork showed to be extremely effective and selective for mercury in binary mixtures, while in complex matrices like seawater, moderate inhibition of the sorption process was observed, attributed to a change in mercury speciation. The loadings achieved are similar to the majority of literature values found for other biosorbents and for other metals, suggesting that cork stoppers can be recycled as an effective biosorbent for water treatment. However, the most interesting result is that equilibrium data show a very rare behaviour, with the isotherm presenting an almost square convex shape to the concentration axis, with an infinite slope for an Hg concentration in solution around 25 μg/L.     

Priority assessment of toxic substances in life cycle assessment. Part II: assessing parameter uncertainty and human variability in the calculation of toxicity potentials

Toxicity potentials are standard values used in life cycle assessment (LCA) to enable a comparison of toxic impacts between substances. This paper presents the results of an uncertainty assessment of toxicity potentials that were calculated with the global nested multi-media fate, exposure and effects model USES-LCA. The variance in toxicity potentials resulting from input parameter uncertainties and human variability was quantified by means of Monte Carlo analysis with Latin Hypercube sampling (LHS). For Atrazine, 2,3,7,8-TCDD and Lead, variation, expressed by the ratio of the 97.5%-ile and the 2.5%-ile, ranges from about 1.5 to 6 orders of magnitude. The major part of this variation originates from a limited set of substance-specific input parameters, i.e. parameters that describe transport mechanisms, substance degradation, indirect exposure routes and no-effect concentrations. Considerable correlations were found between the toxicity potentials of one substance, in particular within one impact category. The uncertainties and correlations reported in the present study may have a significant impact on the outcome of LCA case studies.     

Intensified wheat husk conversion employing energy-efficient hybrid electromagnetic radiations for production of fermentable sugar: process optimization and life cycle assessment

Environmental Science and Pollution Research - This article reports an energy-efficient green pathway for the sustainable conversion of an abundant agro-residue viz. wheat husk (WH) into...     

Recycling/reuse of plastic waste as construction material for sustainable development: a review

Environmental Science and Pollution Research - The exponential rise in the production of plastic and the consequential surge in plastic waste have led the scientists and researchers look out for...     

Country-level factors in a failing relationship with nature: Nature connectedness as a key metric for a sustainable future

Climate change and biodiversity loss show that the human–nature relationship is failing. That relationship can be measured through the construct of nature connectedness which is a key factor in pro-environmental behaviours and mental well-being. Country-level indicators of extinction of nature experience, consumption and commerce, use and control of nature and negativistic factors were selected. An exploratory analysis of the relationship between these metrics and nature connectedness across adult samples from 14 European countries was conducted (n = 14,745 respondents). The analysis provides insight into how affluence, technology and consumption are associated with the human–nature relationship. These findings motivate a comparison of how nature connectedness and composite indicators of prosperity, progress, development, and sustainability relate to indicators of human and nature’s well-being. In comparison to composite indexes, it is proposed that nature connectedness is a critical indicator of human and nature’s well-being needed to inform the transition to a sustainable future.     

Integrating life cycle assessment and a farmer survey of management practices to study environmental impacts of peach production in Beijing,China

Environmental Science and Pollution Research - While intensive peach production has expanded rapidly in recent years, few studies have explored the environmental impacts associated with specific...     

Priority assessment of toxic substances in life cycle assessment. Part I: calculation of toxicity potentials for 181 substances with the nested multi-media fate, exposure and effects model USES-LCA

Toxicity potentials are standard values used in life cycle assessment (LCA) to enable a comparison of toxic impacts between substances. In most cases, toxicity potentials are calculated with multi-media fate models. Until now, unrealistic system settings were used for these calculations. The present paper outlines an improved model to calculate toxicity potentials: the global nested multi-media fate, exposure and effects model USES-LCA. It is based on the Uniform System for the Evaluation of Substances 2.0 (USES 2.0). USES-LCA was used to calculate for 181 substances toxicity potentials for the six impact categories freshwater aquatic ecotoxicity, marine aquatic ecotoxicity, freshwater sediment ecotoxicity, marine sediment ecotoxicity, terrestrial ecotoxicity and human toxicity, after initial emission to the compartments air, freshwater, seawater, industrial soil and agricultural soil, respectively. Differences of several orders of magnitude were found between the new toxicity potentials and those calculated previously.     

Greenhouse gas emission from small clinics solid waste management scenarios in an urban area of an underdeveloping country: A life cycle perspective

This study aimed to investigate the effects on the environment of small clinics solid waste management by applying a life cycle analysis approach. Samples were collected from 371 private clinics situated in densely populated areas of Hyderabad, Pakistan. The solid waste from surveyed clinics was categorically quantified on daily basis for 30 consecutive days. The functional unit for waste was defined as 1 tonne. System limitations were defined as landfilling, incineration, composting, material recovery, and transportation of solid waste. The treatment and disposal methods were assessed according to their greenhouse gas emission rate. For the evaluation, three different scenarios were designed. The second scenario resulted in the highest emission value of 1491.78 kg CO₂ eq/tonne of solid waste due to mixed waste incineration, whereas the first scenario could not offer any saving because of uncovered landfilling and 67.5% higher transport fuel consumption than the proposed network. The proposed third scenario was found to be a better solution for urban clinics solid waste management, as it resulted in savings of 951.38 kg CO₂ eq/tonne of solid waste. This integrated design is practicable by resource-constrained economy. This system consists of composting, material recovery, and incineration of hazardous waste. The proposed system also includes a feasible transportation method for urban area collection networks. The findings of the present study can play a vital role in documenting evidence and for policymakers to plan the solid waste management of clinics, as previously no studies have been conducted on this particular case.

Implications: This study aims to highlight the impact of small clinics solid waste management scenarios on the environment in a developing country’s urban area. Life cycle analysis is used for comparison of greenhouse gase emission from different scenarios, including the purposed integrated method. Small clinics play a very important role in health care, and their waste management is a very serious issue; however, there are no previous studies on this particular case to the best knowledge of the authors. This study can be considered as forerunner effort to quantify the environmental footprint of small clinics solid waste in urban areas of a developing country.