TiO2/H2O2/UV和TiO2/O3/UV降解对氯苯甲酸和喹啉的试验研究

主要叙述TiO2/H2O2/UV和TiO2/O3/UV体系降解对氯苯甲酸(4-CBA)和喹啉的试验研究.研究表明,(1)在TiO2/H2O2/UV体系里目标物降解速度先随过氧化氢投加量的增加而提高,但超过一定浓度之后便开始下降;(2)在TiO2/O3/UV体系中,目标降解物的反应速度都非常快,且臭氧浓度高的时候降解速度更快;(3)二氧化钛催化剂在TiO2/O3/UV体系中作为积极因素有助于提高反应速率,而在TiO2/H2O2/UV体系是消极因素,会降低反应速率.     

TiO2/H2O2/UV和TiO2/O3/UV降解对氯苯甲酸和喹啉的试验研究

主要叙述TiO2/H2O2/UV和TiO2/O3/UV体系降解对氯苯甲酸（4-CBA）和喹啉的试验研究.研究表明,（1）在TiO2/H2O2/UV体系里目标物降解速度先随过氧化氢投加量的增加而提高,但超过一定浓度之后便开始下降;（2）在TiO2/O3/UV体系中,目标降解物的反应速度都非常快,且臭氧浓度高的时候降解速度更快;（3）二氧化钛催化剂在TiO2/O3/UV体系中作为积极因素有助于提高反应速率,而在TiO2/H2O2/UV体系是消极因素,会降低反应速率.     

Degradation of short-chain alkyl- and alkanolamines by TiO2- and Pt/TiO2-assisted photocatalysis

The photooxidation of C2H5NH2, (C2H5)2NH, HOC2H4NH2, (HOC2H4)2NH and (HOC2H4)3N using TiO2 and Pt/TiO2 as photocatalysts has been investigated. A laboratory set up was designed and a study on the influence of the concentration of the photocatalyst, the pH-value and the structure of the amine performed. The photocatalytic process was optimized with respect to the concentrations of the model substances during degradation. The decrease of the amine concentrations was found to be maximum at a pH of 10. The time-dependence of the formation of cationic breakdown products, such as NH3/NH4 and short-chain alkyl- and alkanolamines was studied by analyses with single column ion chromatography. The experimental data show that the photodegradation follows a Langmuir-Hinshelwood kinetic. The mineralization of the model substances also was monitored by measurements of the decrease of the TOC and of the formation of NO2 and NO3. The different mineralization efficiencies for the model substances studied are discussed with regard to their structure and adsorption behaviour on the photocatalyst. A possible breakdown mechanism involving the electrophilic attack of the hydroxyl radical is given. The applicability of the TiO2-assisted photocatalytic degradation of C2H5NH2 and (C2H5)2NH was tested at the pilot plant-scale with real solar radiation. The degradation rates and products obtained were similar to those found in the laboratory experiments.     

Study on the indoor volatile organic compound treatment and performance assessment with TiO2/MCM-41 and TiO2/quartz photoreactor under ultraviolet irradiation

Volatile organic compounds (VOCs) are the cause of indoor air pollution and are readily emitted from furniture and cleaning agents. In Taiwan, the concentrations of indoor VOCs range roughly from 1 to 10 ppm. It is important to effectively reduce indoor VOC emissions and establish the implementation of long-term, low-cost, controlled techniques such as those found in the ultraviolet/titanium dioxide (UV/TiO2) control systems. This study evaluates the performance of a photoreactor activated by visible irradiation and packed with TiO2/quartz or TiO2/mobile catalytic material number 41 (MCM-41). The photocatalysts tested include commercial TiO2 (Degussa P-25) and synthesized TiO2 with a modified sol-gel process. The UV light had a wavelength of 365 nm and contained an 8-W, low-pressure mercury lamp. Reactants and products were analyzed quantitatively by using gas chromatography with a flame-ionization detector. It is important to understand the influence of such operational parameters, such as concentration of pollutant, temperature, and retention time of processing. The indoor concentrations of VOCs varied from 2 to 10 ppm. Additionally, the temperatures ranged from 15 to 35 degrees C and the retention time tested from 2 to 8.2 sec. The results show that quartz with TiO2 had a better photoreductive efficiency than quartz with MCM-41. The toluene degradation efficiency of 77.4% with UV/TiO2/quartz was larger than that of 54.4% with the UV/TiO2/MCM-41 system under 10-min reaction time. The degradation efficiency of the UV/TiO2 system decreased with the increasing concentrations of indoor VOCs. The toluene degradation efficiency at 2 ppm was approximately 5 times greater than that at 10 ppm. The photoreduction rate of the VOCs was also evaluated with the Langmuir-Hinshewood model and was shown to be pseudo-first-order kinetics.     

Correction to: Dye decomposition and air de‑pollution performance of TiO2/SiO2 and N‑TiO2/SiO2 photocatalysts coated on Portland cement mortar substates

Environmental Science and Pollution Research -     

一种光催化体系光催化降解苯胺的研究

以钛酸丁酯为原料．以膨润土为载体,用酸性溶胶法合成TiO2纳米复合物,并利用该复合物作催化剂,在H2O2存在下进行光催化降解苯胺溶液。结果表明,该催化剂在UV／H2O2系统中对苯胺溶液有很好的光催化降解效果,其效果优于纯TiO2;H2O2的存在提高了苯胺光催化降解速率,在本实验条件下其最佳摩尔浓度是5mmol／L;溶液pH是影响反应速率的重要因素．pH在中性范围内具有更强的光催化活性;该体系中苯胺能够有效地被降解,其光催化反应遵循一级反应动力学规律。     

纳米Bi2O3/TiO2复合光催化剂的制备及性能研究

以光催化效果为评价标准,采用超声波作用下水解法制备Bi2O3／TiO2复合光催化剂,考察了水解条件和Bi2O3掺入量等制备条件对复合光催化剂性能的影响。结果表明,与传统制备方法相比,该方法操作简单、快速;当水和乙醇的比例为4：1时所得样品的光催化活性最好;Bi2O3的掺入拓宽了TiO2对光的吸收范围,提高了TiO2的光催化活性,掺入量（Bi2O3）为0．25％复合光催化剂催化活性最高;复合光催化剂对多种水溶性染料均具有较好的处理效果。     

Photocatalytic mineralization of glyphosate in a small-scale plug flow simulation reactor by UV/TiO2

The present work involves the photocatalytic mineralization of glyphosate on a plug flow reactor by UV/TiO(2). The effect of catalyst loading shows an optimal value (0.4 g L(-1)) which is necessary to mineralize glyphosate. The kinetic rate of glyphosate mineralization decreases with the increasing initial concentration of glyphosate, and the data can be described using the first-order model. An alkaline environment is conducive to glyphosate mineralization. The mineralization efficiency increases with elevated flow rate to 114 mL min(-1), which is followed by a decrease with a further increase in flow rate due to the reduction of the residence time. The presence of external oxidants (K(2)S(2)O(8), H(2)O(2) and KBrO(3)) and photosencitizer (humic acid) can significantly enhance glyphosate mineralization. Photocatalysis oxidation ability of the three studied oxidants decrease in the order of: S(2)O(8)(2-) > BrO(3)(-) > H(2)O(2). Finally, the Langmuir-Hinshelwood (L-H) model was used to rationalize the mechanisms of reactions occurring on TiO(2) surfaces and L-H model constants were also determined.     

Photocatalytic mineralization of glyphosate in a small-scale plug flow simulation reactor by UV/TiO2

The present work involves the photocatalytic mineralization of glyphosate on a plug flow reactor by UV/TiO₂. The effect of catalyst loading shows an optimal value (0.4 g L^?1) which is necessary to mineralize glyphosate. The kinetic rate of glyphosate mineralization decreases with the increasing initial concentration of glyphosate, and the data can be described using the first-order model. An alkaline environment is conducive to glyphosate mineralization. The mineralization efficiency increases with elevated flow rate to 114 mL min^?1, which is followed by a decrease with a further increase in flow rate due to the reduction of the residence time. The presence of external oxidants (K₂S₂O₈, H₂O₂ and KBrO₃) and photosencitizer (humic acid) can significantly enhance glyphosate mineralization. Photocatalysis oxidation ability of the three studied oxidants decrease in the order of: S₂O₈ ^2? > BrO₃ ^? > H₂O₂. Finally, the Langmuir–Hinshelwood (L-H) model was used to rationalize the mechanisms of reactions occurring on TiO₂ surfaces and L-H model constants were also determined.     

Photocatalytic reactions of pyrene at TiO2/water interfaces

The photocatalytic oxidation of pyrene preadsorbed on TiO2 is examined in aqueous suspension under UV irradiation. Chemical oxygen demand measurements, UV-VIS spectrophotometer, infrared spectrometer and GC-MS analytical techniques were used to monitor the formed intermediates. During the oxidation processes, the ring-open reaction, hydroxylation and ketolysis occurred to produce some intermediate products (4-oxapyrene-5-one, 1,6- or 1,8-pyrenediones, 4,5-phenanthrenedialdehyde, cyclopenta[def]phenanthrene). Some factors affecting the photodegradation rate were also studied. The results were different from other studies: The pH of the dispersion, ratio of Py/TiO2:water had little effect on the photooxidation rate of pyrene catalyzed by TiO2, while the surface coverage, addition of Fe3+ affected it greatly.     

TiO2／SiO2催化剂可见光降解偶氮染料的研究

以多孔硅胶作载体.通过酸性溶胶法制备了TiO2/SiO2催化剂.采用X射线衍射(XRD)、热重一差热分析(TG-DTA)、扫描电镜(SEM)和BET等方法对该催化剂进行了表征.以偶氮染料酸性橙7(A07)的可见光降解作为探针反应,研究了TiO2/SiO2的催化活性.结果表明,TiO2的平均晶粒尺寸为5.1 nm,晶型为锐钛矿;TiO2/SiO2具有大的比表面积,比P-25催化剂具有更高的光催化活性和更好的沉降性能,便于回收利用.     

Dye decomposition and air de-pollution performance of TiO2/SiO2 and N-TiO2/SiO2 photocatalysts coated on Portland cement mortar substates

Environmental Science and Pollution Research - In this study, the newly synthesized TiO2 and N doped TiO2 clusters were added to silica sol to synthesize N-TiO2/SiO2 composites via the...     

Fe2O3-Cr2O3/TiO2系列催化剂的结构和脱硝性能

研究以纳米TiO2为载体,浸渍负载过渡金属氧化物,以CO为还原剂的脱硝催化剂的脱硝性能。实验中以计算量的Ni（NO3）2和Fe（NO3）3混合溶液浸渍纳米TiO2粉末,室温下搅拌30 min至混合均匀,放入旋转蒸发器中,70℃下至水分蒸干为止;所得粉末在550℃下、空气气氛中焙烧4 h即得所需催化剂。用以上方法分别制备2%Fe2O3-10%Cr2O3/TiO2、4%Fe2O3-8%Cr2O3/TiO2、6%Fe2O3-6%Cr2O3/TiO2、8%Fe2O3-4%Cr2O3/TiO2与10%Fe2O3-2%Cr2O3/TiO2等5种催化剂样品。实验结果表明,制备的催化剂具有较好的结构,分散较为均匀。对于CO＋NO反应,Fe2O3-Cr2O3/TiO2系列催化剂具有较好的催化活性,NO的转化率都达到了100%。其中,10%Fe2O3-2%Cr2O3/TiO2样品具有最好的低温活性,H2-TPR结果表明,这是由于10%Fe2O3-2%Cr2O3/TiO2催化剂更易于被CO预还原。     

纳米TiO2-Ag改性VACF处理氨气研究

利用浸渍法将纳米TiO2·Ag负载于粘胶基活性炭纤维上进行改性来处理低浓度氨气,扫描电镜观测和能量色散谱分析表明纳米TiO2和Ag均较成功地负载于VACF表面上,改性VACF对氨气脱除性能良好,最大脱除率为93.3%;当Ag*掺杂量为TiO2含量的0.5wt%时氨气脱除率达到最大值;存在最佳相对湿度为55%;在氨气浓度为13～65 mg/m3范围内,浓度越低,脱除效果越好;处理较高浓度氨气可通过增加改性VACF用量;随着反应连续进行,改性VACF稳定性受到影响,但仍具有脱除氨气能力.     

Assessment comparison of commercial TiO2 and TiO2 sol-gel on the degradation of caffeine using artificial radiation

Environmental Science and Pollution Research - The presence of endocrine disrupting compounds in water receptor bodies, such as drugs, currently has in scientific field a great focus of studies...     

Photocatalytic degradation of mixed gaseous carbonyl compounds at low level on adsorptive TiO2/SiO2 photocatalyst using a fluidized bed reactor

An adsorptive silica-supported titania photocatalyst TiO(2)/SiO(2) was prepared by using nanosized titania (anatase) immobilized on silica gel by the sol-gel technique with the titanium tetra isopropoxide as the main raw material and acetic acid as the acid catalyst. Meanwhile the structure and properties of the TiO(2)/SiO(2) photocatalyst were studied by means of many modern analysis techniques such as TEM, XRD, and BET. Gas-solid heterogeneous photocatalytic decomposition of four carbonyl compounds mixture at low concentration levels over ultraviolet irradiated TiO(2)/SiO(2) photocatalyst were carried out with high degradation efficiencies in a coaxial triple-cylinder-type fluidized bed photocatalytic reactor, which provided efficient continuous contact of ultraviolet photons, silica-supported titania photocatalyst, and gaseous reactants. Experimental results showed that the photocatalyst had a high adsorption performance and a good photocatalytic activity for four carbonyl compounds mixture. Some factors influencing the photocatalytic decomposition of the mixed carbonyl compounds, i.e. the gas flowrate, relative humidity, concentration of oxygen, and illumination time, were discussed in detail. It is found that the photocatalytic reaction rate of four carbonyl compounds decreased in this order: propionaldehyde, acetone, acetaldehyde and formaldehyde.     

Photocatalytic degradation of imazethapyr herbicide at TiO2/H2O interface

The photocatalytic degradation of imazethapyr, a herbicide of the imidazolinone family, was investigated in an aqueous suspension of titanium dioxide used as a catalyst. A pseudo-first order kinetic model was employed to discuss the results. The effect of catalyst loading, initial concentration of imazethapyr, hydrogen peroxide, pH value, and temperature were investigated. Imazethapyr disappearance as a function of irradiation time was analyzed by HPLC. The ammonium ion formation was determined spectrophotometrically at 694 nm. The degradation was observed to proceed more favorably at natural pH (ca. 4.4) when the pH was varied in the range from 2 to 11. The addition of hydrogen peroxide to the TiO2 suspension enhanced the degradation rate constant up to 5.0x10(-3) mol l-1, but decreased it at higher concentrations. The degradation rate constants decreased by 19% with a temperature increase from 20 to 40 degrees C in the TiO2 suspension, whereas a 16% increase in imazethapyr direct photolysis was observed for the same temperature range. This behavior indicates the occurrence of physisorption between TiO2 and imazethapyr molecules.     

Ozone-driven photocatalyzed degradation and mineralization of pesticide,Triclopyr by Au/TiO2

Triclopyr is a widely used pesticide which is non-biodegradable and enters aquatic systems. The ozone facilitated photocatalyzed degradation and mineralization of Triclopyr using Au-loaded titania as heterogeneous catalyst is reported. The oxidative degradation activity of the hazardous pesticide was investigated at pH 7.8 under varied reaction conditions, including in presence and absence of ozone, titania alone, in presence and absence of light and with different loadings of Au on support. Photocatalysis with 2% Au/TiO₂ in the presence of ozone yielded 100% degradation of Triclopyr in 2 h. The extent of degradation of pesticide and its mineralization were confirmed by GC-MS. For 10 mg/L of Triclopyr, 0.1 g/L of catalyst was found to be the optimum for mineralization. Results show that photocatalyzed ozonation with Au/TiO₂ as catalyst is a very effective for its removal. No leaching of Au was observed in triplicate runs. Catalyst was fully recoverable and reusable with no loss of activity.     

石墨烯/TiO_2复合物的制备及其光催化性能

为拓展二氧化钛(TiO_2)在可见光区的光响应范围,在140℃水热条件下制备了不同氧化石墨烯含量的石墨烯/二氧化钛(RGO/TiO_2)复合材料。利用X-射线粉末衍射仪(XRD)、扫描电子显微镜(SEM)等对材料进行了表征。以甲基橙为目标污染物,研究了在模拟太阳光和紫外光照下TiO_2和RGO/TiO_2对甲基橙的光催化降解性能。结果表明,TiO_2和GO复合后,TiO_2由原来单一的金红石型转变为金红石型和锐钛矿型并存,出现了混晶效应;在模拟太阳光的条件下,复合材料的催化活性均高于TiO_2本身;光照4 h后80 mg氧化石墨烯添加量制备的复合材料对甲基橙的光催化降解率达到69.58%,是TiO_2的1.65倍;在紫外光照1.5 h时,复合材料对甲基橙的降解率达到了70%。由此可知,石墨烯的存在能够促进TiO_2半导体中电子和空穴的有效分离,显著提高了TiO_2光催化剂对可见光的响应。