Ethoxyresorufin-O-deethylase (EROD) Activity in Dab (Limanda limanda) as Biomarker for Marine Monitoring (6 pp)

Goal, Scope and Background Ethoxyresorufin-O-deethylase (EROD) is a well-accepted marker for biological effects in fish and is, therefore, part of numerous monitoring programmes. EROD activity was measured in livers of dab (Limanda limanda) from the German Bight (North Sea) from 1995 to 2003. The aim of the present long-term study was (a) time trend monitoring of EROD activity of dab from the German Bight and (b) to elucidate the needs for a successful application of EROD activity as an early warning system. Methods. EROD activities were determined fluorimetrically in dab liver microsomes, using resorufin as an external standard. The limit of detection (LD) and the limit of quantification (LQ) were calculated. Results were referred to protein concentrations. Results and Discussion. EROD activities of 610 female dab caught in different seasons between January 1995 and August 2003 were analyzed individually. Activities varied from 〈 LD to 1768 pmol/(min mg protein) and showed an annual cycle as well as significant differences between the years. Highest EROD activities were observed in early summer and lowest activities during the winter period. In autumn 2002, significantly elevated EROD activities were detected, possibly related to effects of the River Elbe flood event. Two scenarios with different EROD baseline data are presented to discuss the prerequisites for the use of EROD as a monitoring tool. The comparison of these scenarios underlines the importance of appropriate season-specific baseline data. Conclusion. The use of EROD as an early warning tool for contaminant effects in dab in the German Bight has different prospects during the year, because, due to the high background variability, elevated EROD activities are less easy to detect in spring/summer than during the remaining times of the year. Recommendation and Outlook. The availability of site-specific data on the EROD baseline level, its random variation and its annual cycle is a necessary prerequisite for monitoring. If monitoring is to be carried out only for a limited time period of the year, a season with low background variability in EROD activity (autumn) should be chosen to avoid the need for a compensation of the temperature-triggered shift in sexual cycles and the resulting changes in EROD activity.     

Micellar-enhanced ultrafiltration (MEUF) with mixed surfactants for removing Cu(II) ions

A nonionic surfactant, polyoxyethylene Octyl phenyl ether (Triton-X), is added to a micellar-enhanced ultrafiltration process to lower the critical micellar concentration (CMC) of an anionic surfactant, sodium dodecyl sulfate (SDS). The effects of adding Triton-X on the copper removal efficiency, the permeate SDS concentration, the copper binding capacity of SDS micelles, and membrane fouling are investigated. Our results show that the addition of Triton-X at concentrations greater than its CMC can reduce the SDS dosage required for effective Cu removal, and at the same time, minimize the permeate SDS concentration. Although, no adverse effect on the copper binding capacity of SDS micelle is observed by the addition of Triton-X, the membrane fouling is worsen. Cleaning the membrane with DI water allowed restoring the membrane flux, indicating that the fouling caused by Triton-X was reversible.     

Food (miles) for Thought - Energy Balance for Locally-grown versus Imported Apple Fruit (3 pp)

- This commentary compares the primary energy requirement for apples (cultivar ‘Braeburn’), which were either imported or locally-grown in Meckenheim, Germany. Imported apples of the same cultivar were grown in a Southern hemisphere winter in Nelson, Southland, New Zealand, and were picked at the end of March with subsequent 28 d transport by sea for sale in April in Germany. Locally-grown apples (cultivar ‘Braeburn’) were picked in mid-October and required a primary energy of nearly 6 MJ/kg of fruit including 0.8 MJoule/kg for five months CA storage at 1°C during a Northern hemisphere winter until mid-March. This compared favourably with 7.5 MJoule/kg for overseas shipment from New Zealand, i.e. a ca. 27% greater energy requirement for these imported fruits. Overall, the primary energy requirement of regional produce, stored several months on-site, partially compensated for the larger energy required to import fresh fruit from overseas. This result is in marked contrast to reported overestimates of a reported up to 8-fold energy requirement for domestic versus imported apple juice concentrate [7]. Our own findings of less primary energy required for domestic apple fruit is discussed with respect to providing local employment, fruit orchards preserving the countryside, quality assurance systems for local fruit such as QS and EUREP-GAP, networking and other factors favouring regional production.     

Carnauba (Copernicia prunifera) palm tree biomass as adsorbent for Pb(II) and Cd(II) from water medium

Environmental Science and Pollution Research - Plant-based biomass (CFB (carnauba fruit biomass)) obtained from the fruit exocarp of the species Copernicia prunifera (Mill.) H.E. Moore (carnauba)...     

Photostabilizers for azadirachtin-A (a neem-based pesticide)

Photostability of azadirachtin-A (a neem based pesticide) has been studied without and with adding stabilizers such as ter. butyl-p-cresol, 8-hydroxy quinoline and ter. butyl hydroquinone as thin film on glass surface and on leaf surface under sunlight and UV light. Half-life of azadirachtin has been found to be 48 min and 3.98 days as thin film under UV light and sunlight and 2.47 days on leaf surface, respectively. 8-Hydroxy quinoline and ter. butyl hydroquinone have been found effective in controlling degradation of azadirachtin under both sunlight and UV light with half-life of 44.42 and 35.90 days under sunlight, and 55.80 and 48.50 h under UV light, respectively. Whereas ter. butyl-p-cresol has been found effective A only under sunlight. Significant decreases in antifeedant and insect growth regulatory activity against third instar larvae of Spodopterra litura has been observed with azadirachtin when exposed to sunlight and UV light. However, by the addition of above stabilizers, the biological activity of azadirachtin-A has been retained even after 24 h of irradiation under UV light and up to 30 days of exposure to sunlight.     

Surface properties and catalytic performance of La(1-x)Sr(x)FeO(3) perovskite-type oxides for methane combustion

La(1-x)Sr(x)FeO(3) (x=0.0-1.0) perovskites were prepared and tested for the combustion of methane. X-ray diffraction (XRD) patterns revealed the presence of a single perovskite structure for substitutions 0x0.3, however Fe(2)O(3), SrCO(3) and SrFeO(3) phases were observed for substitutions x>0.3. The results of activity test indicate that with La(1-x)Sr(x)FeO(3) as the catalyst, the combustion of methane can take place at low temperatures around 400 degrees C. Partial substitution of La with Sr increases the activity and an optimal substitution fraction (x=0.5) exists in the La(1-x)Sr(x)FeO(3) catalysts. Catalyst activity can be well correlated to the product of the specific surface area and atomic ratio of Fe to La+Sr on the catalyst surface. Experimental results of O(2)-TPD and CH(4)-TPD in the range of 350-500 degrees C indicate that the amount of oxygen desorbed from the La(1-x)Sr(x)FeO(3) catalysts is far larger than that of methane. Therefore, it can be proposed that the catalytic oxidation of CH(4) over these catalysts proceeds with the surface reaction between CH(4) in the gas phase and the adsorbed O(2). Addition of water vapor or CO(2) to the feed inhibited catalyst activity, but the inhibition was reversible and became negligible at high reaction temperature.     

Long-term sampling method for polychlorinated dibenzofurans (PCDFs) and dibenzo(p)dioxins (PCDDs) in flue gas of combustion facilities

A long-term sampling method for PCDF/D in emissions from combustion facilities is presented. The sampling of PCDF/D was performed over a four week period. The results are compared to results of four one-week measurements.     

Ice (photo)chemistry. Ice as a medium for long-term (photo)chemical transformations--environmental implications

This review accounts for the current knowledge about the distribution, accumulation, and chemical/photochemical transformations of persistent, bioaccumulative, and toxic compounds (PBTs) in water ice, especially in the connection with polar regions and atmospheric cloud particles. (Photo)reactions on/in ice are discussed in terms of photochemistry, photobiology, paleochemistry, as well as astrophysics. Authors propose a model, in which a significant amount of some PBTs are generated by (photo)chemistry of primary pollutants in ice, which may subsequently be released to the environment. It is argued that ice photochemistry might play an important role in the chemical transformations in cold ecosystems and in the upper atmosphere, particularly now when the ozone layer is partially depleted.     

Estimating K(oc) for persistent organic pollutants: limitations of correlations with K(ow)

The n-octanol/water partition coefficient (K(ow)) is commonly used to predict the soil or aquatic particle water partition coefficient normalized to organic carbon (K(oc)). Many correlations are available covering several chemical classes and ranges of hydrophobicity. This work indicates the K(ow) may not be a strong predictor for persistent organic pollutants (POPs) which are defined here as chemicals with logK(ow) > 5.0. In addition, the correlation developed in this work for POPs will still result in a predicted value which is of by a factor of 15. Accordingly, care must be taken when applying K(oc) estimations using K(ow) for POPs until more suitable correlations are developed.     

Simultaneous conversion of CHClF(2) and CH(3)Br to CH(2)CF(2)

Gas phase reaction of CHClF(2) with CH(3)Br in an alumina tube reactor at 773-1123 K as a function of various input ratios of CH(3)Br to CHClF(2) is presented. The major products detected include C(2)F(4), CH(2)CF(2), and CH(4). Minor products include CH(3)Cl, CHF(3), C(2)H(4), C(2)H(2), CH(2)CF-CF(3), and C(2)H(3)F. The reaction produces a high yield of CH(2)CF(2) (53% based on CHClF(2) feed) at 1123 K and an input molar ratio of CH(3)Br to CHClF(2) of 1.8, suggesting that the reaction potentially can be developed as a process to convert two ozone depleting substances (CHClF(2) and CH(3)Br) to a highly valuable chemical, CH(2)CF(2). The reaction of CHClF(2) with CH(3)Cl and CH(3)I was also investigated under similar reaction conditions, to assist in understanding the reaction chemistry involved in the reaction of CHClF(2) with CH(3)Br.     

Biotechnological intervention for societal development (BioSangam 2020)

Environmental Science and Pollution Research -     

Di(2-ethylhexyl)phthalate and mono(2-ethylhexyl)phthalate in media for in vitro fertilization

In vitro fertilization (IVF) is one of the most important treatments of infertility to provide a chance of conceiving. In IVF treatment, sperm are washed and motile sperm are isolated with sperm washing media (SWM) for the purpose of fertilization; fertilized ova are then incubated for a maximum of 5 or 6 d in media for IVF (IVFM). The exposure of fertilized ova to chemicals via such media has not been studied. We determined the concentrations of two contaminants; di(2-ethylhexyl)phthalate (DEHP) and its hydrolyzed product mono(2-ethylhexyl)phthalate (MEHP) in IVFM, SWM, and protein sources (PS: human serum albumin or serum substitute) for IVFM and SWM. The DEHP and MEHP in these media were extracted by a liquid-liquid extraction method and their concentrations determined by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). Fifteen IVFM, nine SWM, and six PS obtained in Japan were examined. The concentrations of DEHP and MEHP in IVFM and SWM were <10-114 and <2.0-263 ng mL⁻¹, respectively. The concentrations of both DEHP and MEHP were higher in the media containing PS than in those without PS. Either MEHP alone or both DEHP and MEHP were detected in PS. The concentrations of DEHP and MEHP in PS were <10-982 and 47.0-1840 ng mL⁻¹, respectively. The DEHP and MEHP detected in these media were derived from PS. This is the first study on the chemical contamination of IVFM, SWM, and PS.     

Atmospheric chemistry of HFE-7000 (CF(3)CF (2)CF (2)OCH (3)) and 2,2,3,3,4,4,4-heptafluoro-1-butanol (CF (3)CF (2)CF (2)CH (2)OH): kinetic rate coefficients and temperature dependence of reactions with chlorine atoms

Background, aim, and scope  The adverse environmental impacts of chlorinated hydrocarbons on the Earth’s ozone layer have focused attention on the effort to replace these compounds by nonchlorinated substitutes with environmental acceptability. Hydrofluoroethers (HFEs) and fluorinated alcohols are currently being introduced in many applications for this purpose. Nevertheless, the presence of a great number of C–F bonds drives to atmospheric long-lived compounds with infrared absorption features. Thus, it is necessary to improve our knowledge about lifetimes and global warming potentials (GWP) for these compounds in order to get a complete evaluation of their environmental impact. Tropospheric degradation is expected to be initiated mainly by OH reactions in the gas phase. Nevertheless, Cl atoms reaction may also be important since rate constants are generally larger than those of OH. In the present work, we report the results obtained in the study of the reactions of Cl radicals with HFE-7000 (CF₃CF₂CF₂OCH₃) (1) and its isomer CF₃CF₂CF₂CH₂OH (2). Materials and methods  Kinetic rate coefficients with Cl atoms have been measured using the discharge flow tube–mass spectrometric technique at 1 Torr of total pressure. The reactions of these chlorofluorocarbons (CFCs) substitutes have been studied under pseudo-first-order kinetic conditions in excess of the fluorinated compounds over Cl atoms. The temperature ranges were 266–333 and 298–353 K for reactions of HFE-7000 and CF₃CF₂CF₂CH₂OH, respectively. Results  The measured room temperature rate constants were k(Cl+CF₃CF₂CF₂OCH₃) = (1.24 ± 0.28) × 10⁻¹³ cm³ molecule⁻¹ s⁻¹and k(Cl+CF₃CF₂CF₂CH₂OH) = (8.35 ± 1.63) × 10⁻¹³ cm³ molecule⁻¹ s⁻¹ (errors are 2σ + 10% to cover systematic errors). The Arrhenius expression for reaction 1 was k ₁(266–333 K) = (6.1 ± 3.8) × 10⁻¹³exp[−(445 ± 186)/T] cm³ molecule⁻¹ s⁻¹ and k ₂(298–353 K) = (1.9 ± 0.7) × 10⁻¹²exp[−(244 ± 125)/T] cm³ molecule⁻¹ s⁻¹ (errors are 2σ). The reactions are reported to proceed through the abstraction of an H atom to form HCl and the corresponding halo-alkyl radical. At 298 K and 1 Torr, yields on HCl of 0.95 ± 0.38 and 0.97 ± 0.16 (errors are 2σ) were obtained for CF₃CF₂CF₂OCH₃ and CF₃CF₂CF₂CH₂OH, respectively. Discussion  The obtained kinetic rate constants are related to the previous data in the literature, showing a good agreement taking into account the error limits. Comparing the obtained results at room temperature, k ₁ and k ₂, HFE-7000 is significantly less reactive than its isomer C₃F₇CH₂OH. A similar behavior has been reported for the reactions of other fluorinated alcohols and their isomeric fluorinated ethers with Cl atoms. Literature data, together with the results reported in this work, show that, for both fluorinated ethers and alcohols, the kinetic rate constant may be considered as not dependent on the number of –CF₂– in the perfluorinated chain. This result may be useful since it is possible to obtain the required physicochemical properties for a given application by changing the number of –CF₂– without changes in the atmospheric reactivity. Furthermore, lifetimes estimations for these CFCs substitutes are calculated and discussed. The average estimated Cl lifetimes are 256 and 38 years for HFE-7000 and C₃H₇CH₂OH, respectively. Conclusions  The studied CFCs’ substitutes are relatively short-lived and OH reaction constitutes their main reactive sink. The average contribution of Cl reactions to global lifetime is about 2% in both cases. Nevertheless, under local conditions as in the marine boundary layer, τ _Cl values as low as 2.5 and 0.4 years for HFE-7000 and C₃H₇CH₂OH, respectively, are expected, showing that the contribution of Cl to the atmospheric degradation of these CFCs substitutes under such conditions may constitute a relevant sink. In the case of CF₃CF₂CF₂OCH₃, significant activation energy has been measured, thus the use of kinetic rate coefficient only at room temperature would result in underestimations of lifetimes and GWPs. Recommendations and perspectives  The results obtained in this work may be helpful within the database used in the modeling studies of coastal areas. The knowledge of the atmospheric behavior and the structure–reactivity relationship discussed in this work may also contribute to the development of new environmentally acceptable chemicals. New volatile materials susceptible of emission to the troposphere should be subject to the study of their reactions with OH and Cl in the range of temperature of the troposphere. The knowledge of the temperature dependence of the kinetic rate constants, as it is now reported for the case of reactions 1 and 2, will allow more accurate lifetimes and related magnitudes like GWPs. Nevertheless, a better knowledge of the vertical Cl tropospheric distribution is still required.     

Process enhancing strategies for the reduction of Cr(VI) to Cr(III) via photocatalytic pathway

Environmental Science and Pollution Research - This discourse aimed at providing insight into the strategies that can be adopted to boost the process of photoreduction of Cr(VI) to Cr(III). Cr(VI)...     

水合氧化钛对Cr(Ⅵ)吸附的试验研究

研究了水合氧化钛对水中Cr （Ⅵ）离子的吸附作用。结果表明，吸附过程符合Freundlich经验公式，最佳吸附PH值范围为2≤PH≤4，温度对吸附作用影响较小，采用NaOH溶液可使水合氧化钛的吸附能力得到较好再生。     

Poly (ε-caprolactone) as substrate for water denitrification

In this paper, poly (ε-caprolactone) (PCL) was used as carbon source and biofilm supporter in a fixed bed bioreactor to biologically remove nitrate from drinking water. The experimental results showed that denitrifying microorganisms could easily adapt to PCL as carbon source and attach to the surface of PCL granules. The fine biofilm could form on the surface of PCL granules within 15 days. Denitrification rate was influenced by temperature greatly and it decreased sharply at low temperature (below 20°C) and it was strongly linearly correlated with influent DO level. The denitrification rate at DO 8.5 mg/L was 47.4% of the value at DO 1.4 mg/L. Fixed-bed bioreactor packed with PCL granules could remove 50 mg/L influent nitrate completely, but the effluent DOC and suspended matter level were high. Accordingly, post-treatment unit are needed to ensure the good quality of effluent. Nitrite level did not accumulate in the whole experiment. Microbial growth was the main reason for reactor clog.     

Compressed air-assisted solvent extraction (CASX) for metal removal

A novel process, compressed air-assisted solvent extraction (CASX), was developed to generate micro-sized solvent-coated air bubbles (MSAB) for metal extraction. Through pressurization of solvent with compressed air followed by releasing air-oversaturated solvent into metal-containing wastewater, MSAB were generated instantaneously. The enormous surface area of MSAB makes extraction process extremely fast and achieves very high aqueous/solvent weight ratio (A/S ratio). CASX process completely removed Cr(VI) from acidic electroplating wastewater under A/S ratio of 115 and extraction time of less than 10s. When synthetic wastewater containing Cd(II) of 50mgl(-1) was treated, A/S ratios of higher than 714 and 1190 could be achieved using solvent with extractant/diluent weight ratio of 1:1 and 5:1, respectively. Also, MSAB have very different physical properties, such as size and density, compared to the emulsified solvent droplets, making separation and recovery of solvent from treated effluent very easy.     

Complications with using ratios for environmental data: comparing enantiomeric ratios (ERs) and enantiomer fractions (EFs)

Complications arise when ratios are used to present environmental data because ratios are an unbounded, multiplicative scale that can lead to asymmetrical (skewed) data distributions. Enantiomeric ratios (ERs), historically used in discussions of chiral signatures, often are published as mean ER+/-single-value standard deviation. Application of statistical summaries, such as the widely used sample mean and standard deviation, to skewed ratio data is misleading and often inappropriate. Comparison of statistically summarized ER and enantiomer fraction (EF) data (which are based on a bounded, additive scale) for a range of hypothetical values reveals substantial discrepancies when conversion between ER and EF formats is used. These discrepancies are largest when the ratio data are greater than one and have large variability, because the data are more skewed. In many cases, the use of fractions instead of ratios can help to minimize misrepresentation of environmental data, including chiral data. The use of nonparametric statistical summaries, e.g., median and percentiles, provides a more robust indicator of the typical value and spread for both ER and EF data.