Removal of heavy metal ions from wastewaters using dendrimer-functionalized multi-walled carbon nanotubes

Dendrimer-functionalized multi-walled carbon nanotubes (MWCNT) for heavy metal ion removal from wastewaters were developed. Triazole dendrimers (TD) were built directly onto the carbon nanotube surface by successive click chemistry reactions affording the zero- and first-generation dendrimer-functionalized MWCNT (MWCNT-TD1 and MWCNT-TD2). The Moedritzer-Irani reaction carried out on the amino groups present on the MWCNT-TD2 sample gave the corresponding α-aminophosphonate nanosystem MWCNT-TD2P. Both MWCNT-TD2 and MWCNT-TD2P nanosystems have been characterized by physical, chemical, and morphological analyses. Their chelating abilities towards the toxic metal ions Pb²⁺, Hg²⁺, and Ni²⁺ and the harmless Ca²⁺ ion have been experimentally evaluated in the two different sets of experiments and at the salt concentrations of 1 mg/mL or 1 μg/mL by inductively coupled plasma mass spectrometry (ICP-MS). The results of these studies pointed out the interesting chelating behavior for the phosphonated nanosystem towards the Hg²⁺ ion. The complexation mode of the best chelating system MWCNT-TD2P with mercury was investigated through density functional theory (DFT) calculations, suggesting a chelation mechanism involving the two oxygen atoms of the phosphate group. The synthesized dendrimers, supported on the multi-walled carbon nanotubes, have shown the potential to be used for the selective toxic metal ion removal and recovery.     

Continuous adsorptive removal of glimepiride using multi-walled carbon nanotubes in fixed-bed column

Environmental Science and Pollution Research - Water pollution by emerging pollutants such as pharmaceutical and personal care products is one of today’s biggest challenges. The presence of...     

Testing the resistance of single- and multi-walled carbon nanotubes to chemothermal oxidation used to isolate soots from environmental samples

Quantification of natural and engineered carbon nanotubes (CNT) in the environment is urgently needed to study their occurrence and fate and to enable a proper risk assessment. Currently, such methods are lacking. Here, we tested the resistance of 15 structurally different CNTs to chemothermal oxidation at 375 °C (CTO-375), a method used to isolate soots from environmental samples. Depending on their structure, CNTs survived CTO-375 in proportions ranging from 26 to 93%. Standard addition of CNTs to soil and sediment yielded recoveries between 66 and 171%, demonstrating the capability of CTO-375 to isolate CNTs from complex environmental matrices. These data of pure and added CNTs correspond to recoveries obtained with “ordinary” soots under similar experimental conditions. Hence, soot fractions commonly isolated with CTO-375 from environmental matrices most probably encompass CNTs. Future work should attempt to enhance the method's selectivity, i.e., its capability to separate CNTs from other forms of soot.     

Oxidized multiwalled carbon nanotubes as adsorbent for the removal of manganese from aqueous solution

A batch adsorption process was applied to investigate the removal of manganese from aqueous solution by oxidized multiwalled carbon nanotubes (MWCNTs). In doing so, the thermodynamic, adsorption isotherm, and kinetic studies were also carried out. MWCNT with 5–10-nm outer diameter, surface area of 40–600 m²/g, and purity above 95 % was used as an adsorbent. A systematic study of the adsorption process was performed by varying pH, ionic strength, and temperature. Manganese-adsorbed MWCNT was characterized by Raman, FTIR, X-ray diffraction, XPS, SEM, and TEM. The adsorption efficiency could reach 96.82 %, suggesting that MWCNT is an excellent adsorbent for manganese removal from water. The results indicate that second-order kinetics model was well suitable to model the kinetic adsorption of manganese. Equilibrium data were well described by the typical Langmuir adsorption isotherm. Thermodynamic studies revealed that the adsorption reaction was spontaneous and endothermic process. The experimental results showed that MWCNT is an excellent manganese adsorbent. The MWCNTs removed the manganese present in the water and reduced it to a permissible level making it drinkable.     

碳纳米管溶胶的制备及其去除水中异狄氏剂的研究

采用强酸表面氧化法对碳纳米管表面进行处理,促进碳纳米管在水中的分散,制备碳纳米管溶胶,用于去除水中低浓度持久性有机污染物异狄氏剂.扫描电镜观测表明,氧化后的碳纳米管团簇被分散开,碳纳米管被打断.碳纳米管溶胶对异狄氏剂的吸附性能研究表明,制备的碳纳米管溶胶对异狄氏剂吸附去除效能优于原始碳纳米管,优化的pH值为6,此时碳纳米管溶胶对18μg/L异狄氏剂去除率达到100%;水中的腐殖质提高了吸附去除效能;碳纳米管溶胶对异狄氏剂的吸附等温线呈线性,碳纳米管溶胶的吸附性能优于原始碳纳米管吸附性能.吸附去除后,溶胶态碳纳米管以0.05 mmol/L氯化铝从水中沉淀分离.     

Enhanced bioaccumulation of pentachlorophenol in carp in the presence of multi-walled carbon nanotubes

The impact of suspended particles on the bioavailability of pollutants has long been a controversial topic. In this study, adsorption of pentachlorophenol (PCP) onto a natural suspended particulate matter (SPM) and multi-walled carbon nanotubes (MWCNTs) was studied. Facilitated transports of PCP into carp by SPM and MWCNTs were evaluated by bioaccumulation tests exposing carp (Carassius auratus red var.) to PCP-contaminated water in the presence of SPM and MWCNTs, respectively. Desorption of PCP on SPM and MWCNTs in simulated digested fluids was also investigated. The results demonstrate that MWCNTs (K _F?=?7.99?×?10⁴) had a significantly stronger adsorption capacity for PCP than the SPM (K _F?=?19.0). The presence of SPM and MWCNTs both improved PCP accumulation in the carp during the 21 days of exposure, and the 21 days PCP concentration in the carp was enhanced by 25.9 and 12.8 % than that without particles, respectively. The enhancement in bioaccumulation by MWCNTs was less than that by the SPM. Considerably more PCP was accumulated in the viscera of the fish (BCF?=?519495 for SPM and 148955 for MWCNTs), and the difference in PCP concentrations between different tissues became greater with particles. PCP desorption in the simulated digestive fluids was faster than that in the background solution. Compared to MWCNTs-bound PCP, more SPM-bound PCP was desorbed, and K _F of desorption for SPM was at least 4 orders of magnitude higher than that for MWCNTs, which can explain the greater enhancement in bioaccumulation in the presence of SPM. Particle-bound pollutants might pose more risk than pollutants alone.     

Microwave regeneration of activated carbon used for removal of solvents from vented air

A microwave regeneration of activated carbon used to remove organic solvents from vented air has been investigated. Methyl ethyl ketone (MEK), acetone, and tetrachloroethylene (TCE) vapors were removed from vented air through adsorption onto granular activated carbon. The saturated carbon was then regenerated in a microwave field, where the solvent was quickly desorbed and recovered from the inner pores of the carbon granules. The microwave-induced regeneration restored the original adsorption capacity and surface area of the activated carbon.     

Nutrient removal from biogas slurry and biogas upgrading by microalgae-fungi-bacteria co-cultivation under different carbon nanotubes concentration

In this study, Chlorella vulgaris, Ganoderma lucidum, and endophytic bacteria were co-cultivated with the stimulation of strigolactone analogs GR24 to prepare pellets. During the purification of biogas slurry and biogas, multi-walled carbon nanotubes (MWCNTs) were introduced to enhance the removal efficiencies of nutrients and CO₂. The results showed that both GR24 and MWCNTs affected the purification of biogas slurry and biogas. The maximum chemical oxygen demand, total nitrogen, total phosphorus, and CO₂ removal efficiencies of the Chlorella vulgaris-Ganoderma lucidum-endophytic bacterial symbionts were 82.57 ± 7.96% (P < 0.05), 82.14 ± 7.87% (P < 0.05), 84.27 ± 7.96% (P < 0.05), and 63.93 ± 6.22% (P < 0.05), respectively, with the induction of 10⁻⁹ M GR24 and 1 mg L⁻¹ MWCNTs. Moreover, the growth and photosynthetic performance of the symbionts were consistent with the removal effects. The Chlorella vulgaris-Ganoderma lucidum-endophytic bacterial symbionts obtained high growth rates and enzyme activity with the maximum growth rate of 0.365 ± 0.03 d⁻¹, mean daily productivity of 0.182 ± 0.016 g L⁻¹ d⁻¹, and carbonic anhydrase activity of 31.07 ± 2.75 units, respectively. These results indicated that an appropriate concentration of GR24 and MWCNTs could promote the growth of symbionts, reinforce the purification effects of biogas slurry and biogas, and provide a new idea for the simultaneous purification of wastewater and biogas.

     

Selective removal of the heavy metal ions from waters and industrial wastewaters by ion-exchange method

By ion exchange undesirable ions are replaced by others which don't contribute to contamination of the environment. The method is technologically simple and enables efficient removal of even traces of impurities from solutions. Examples of selective removal of heavy metal ions by ion-exchange are presented. They include removal of Pb(II), Hg(II), Cd(II), Ni(II), V(IV,V), Cr(III,VI), Cu(II) and Zn(II) from water and industrial wastewaters by means various modern types of ion exchangers.     

The removal of uranium (VI) from aqueous solutions onto activated carbon developed from grinded used tire

In this study, activated carbon was prepared from waste tire by KOH chemical activation. The pore properties including the BET surface area, pore volume, pore size distribution, and average pore diameter were characterized. BET surface area of the activated carbon was determined as 558 m²/g. The adsorption of uranium ions from the aqueous solution using this activated carbon has been investigated. Various physico-chemical parameters such as pH, initial metal ion concentration, and adsorbent dosage level and equilibrium contact time were studied by a batch method. The optimum pH for adsorption was found to be 3. The removal efficiency has also been determined for the adsorption system as a function of initial concentration. The experimental results were fitted to Langmuir, Freundlich, and Dubinin–Radushkevich (D-R) isotherm models. A comparison of best-fitting was performed using the coefficient of correlation and the Langmuir isotherm was found to well represent the measured sorption data. According to the evaluation using the Langmuir equation, the saturated monolayer sorption capacity of uranium ions onto waste tire activated carbon was 158.73 mg/g. The thermodynamic equilibrium constant and the Gibbs free energy were determined and results indicated the spontaneous nature of the adsorption process. Kinetics data were best described by pseudo-second-order model.     

Development of highly efficient and reusable magnetic nitrogen-doped carbon nanotubes for chlorophenol removal

Environmental Science and Pollution Research - Nitrogen-doped carbon nanotubes (N-CNTs) were synthesized via a hydrothermal method and further modified with magnetic Co0.5Cu0.5Fe2O4 nanoparticles...     

Adsorption of fulvic acid by carbon nanotubes from water

This study investigated adsorption of fulvic acid (FA) by single-walled (SWCNT) and multi-walled carbon nanotubes (MWCNT) and activated carbon. Adsorption of FA depends greatly on the adsorbent surface area and solution pH. SWCNT has higher adsorption than MWCNT and activated carbon. Lower E4/E6 (absorbance at 465 nm to that at 665 nm) and higher E2/E3 (absorbance at 250 nm to that at 365 nm) ratios of the residual FA in solution after adsorption than that of original FA in low pH ranges suggest that aromatic rich FA fractions with polar moieties readily adsorb on the adsorbents. The apparent interaction mechanisms between FA and CNT surfaces include electrostatic, hydrophobic, π-π and hydrogen-bond interactions. FA adsorption was reduced greatly with increasing pH because of the increase of electrostatic repulsion and the decrease of hydrophobic and hydrogen-bond interactions.     

A workflow to investigate the impacts of weathered multi-walled carbon nanotubes to the mud snail Lymnaea stagnalis

Environmental Science and Pollution Research - Although the development and application of nanomaterials is a growing industry, little data is available on the ecotoxicological effects on aquatic...     

Nutrient and tetracycline removal from simulated biogas slurry and biogas upgrading by microalgae cultivation under different carbon nanotubes concentrations

Environmental Science and Pollution Research - The present study sought to determine the effects of multi-walled carbon nanotubes (MWCNTs) concentrations (0–10 mg L?1) on tetracycline...     

用于水处理的高效除磷型粉煤灰陶粒滤料的研制

为制备用于处理含磷废水的新型功能陶粒滤料,研究了以粉煤灰为主要原料的高效除磷型陶粒烧结制备工艺。通过L9（34）正交实验和极差分析,结合筒压强度实验得到最佳烧结条件为：预热时间30 min,烧结温度950℃,烧结时间30 min;各因子对除磷效率的影响程度为：烧结温度〉烧结时间〉预热时间。通过理化性质测试得出最佳工艺制备的陶粒特性：堆积密度为877 kg/m3,表观密度为1 509 kg/m3,空隙率为41.9%,筒压强度6.94 MPa,盐酸可溶率为2.3%。应用最佳工艺条件所制备的陶粒处理10 mg/L含磷废水获得高达99.83%的磷酸盐去除率。通过最佳烧结工艺能够制备高效除磷型粉煤灰陶粒滤料,在处理含磷废水方面具有一定的应用前景。     

多壁碳纳米管结构对复合光催化剂催化效果的影响

采用溶胶凝胶法制备了多壁碳纳米管负载纳米TiO₂的复合光催化剂（TiO₂/MWCNTs）,以偶氮类染料甲基橙为目标污染物,在自制的光催化反应器上进行了光催化降解反应实验。主要研究同一甲基橙初始浓度（C₀)下,多壁碳纳米管不同管长和管径对复合光催化剂催化效果的影响。结果表明：该降解反应可用一级反应动力学方程描述,反应速率常数k随着多壁碳纳米管管长和管径的增大而增大;与纯纳米TiO₂相比,复合光催化剂对甲基橙的降解率提高了6％～18％,反应速率常数为前者的1.19～2.11倍;采用复合光催化剂的甲基橙光降解溶液自行沉降分离效果较好,静止沉降60 min后达到沉降平衡,剩余浊度为8.5 NTU,下降了90.6％。     

Effect of VOC loading on the ozone removal efficiency of activated carbon filters

Activated carbon (AC) filters are used widely in air cleaning to remove volatile organic compounds (VOCs) and ozone (O(3)). This paper investigates the O(3) removal efficiency of AC filters after previous exposure to VOCs. Filter performance was tested using coconut shell AC and two common indoor VOCs, toluene and d-limonene, representing low and high reactivities with O(3). AC dosed with low, medium and high loadings (28-100% of capacity) of VOCs were exposed to humidified and ozonated air. O(3) breakthrough curves were measured, from which O(3) removal capacity and parameters of the Elovich chemisorption equation were determined. VOC-loaded filters were less efficient at removing O(3) and had different breakthrough behavior than unloaded filters. After 80 h of exposure, VOC-loaded AC samples exhibited 75-95% of the O(3) removal capacity of unloaded samples. O(3) breakthrough and removal capacity were not strongly influenced by the VOC-loading rate. Toluene-loaded filters showed rapid O(3) breakthrough due to poisoning of the AC, while pseudo-poisoning (initially higher O(3) adsorption rates that rapidly decrease) is suggested for limonene-loaded filters. Overall, VOC loadings provide an overall reduction in chemisorption rates, a modest reduction in O(3) removal capacity, and sometimes dramatic changes in breakthrough behavior, important considerations in filter applications in environments where both O(3) and VOCs are present.     

Review of recently used adsorbents for antimony removal from contaminated water

Environmental Science and Pollution Research - As prior pollutants, antimony (Sb) and its compounds are carcinogenic to threaten human health. With the development of the industry, various...