Effect of Advanced Oxidants Generated Via Ultraviolet Light on a Sequentially Loaded and Regenerated Granular Activated Carbon Biofilter

Abstract

The objective of this research was to investigate a sequentially loaded and regenerated granular activated carbon (GAC) biofilter system and to determine whether regenerative ozonation/advanced oxidation could improve the removal and biodegradation of a volatile organic compound from a contaminated airstream. Bench-scale reactors were constructed to operate in a manner analogous to a commercially available system manufactured by Terr-Aqua Environmental Systems (only with longer contact time). The GAC system consisted of two GAC biofilter beds that operated in a cyclical manner. On a given day, the first GAC bed adsorbed methyl isobutyl ketone from a simulated waste airstream, while the second bed underwent regeneration; then on the next day, the second bed was in the adsorption mode while the first was regenerated.

Three bench-scale systems were used to compare the performance under three operating conditions: (1) ozone/ associated oxidant regeneration of a GAC biofilter system that was seeded with microorganisms from a field site, (2) a humid air regeneration of a seeded GAC biofilter, and (3) a humid air regeneration of an unseeded GAC biofilter. For the advanced oxidant regenerated GAC biofilter, a maximum removal efficiency of >95% was achieved with an empty bed contact time of 148 sec and an influent concentration of 125 ppm methyl isobutyl ketone, and 90–95% was achieved at 148-sec empty bed contact time and a 1150-ppm influent.     

Development of cleaner-burning brick kilns in Ciudad Juarez, Chihuahua, Mexico

The following results provide a comparison between net airborne contamination produced by the traditional form of kiln used in Northern Mexico and by those modified according to a design by Dr. Robert Marquez. What has become known as the MK style kiln was intended to significantly reduce contaminant emissions. The concept involves covering the kiln with a dome and channeling the output of an active kiln through a second, identical loaded kiln for its additional filtration of the effluents. Kilns of a pair are connected via clay brick channels. The roles are reversed after the initial kiln is refilled. Significant reductions in the particulate and gaseous emissions were achieved in the prototype system, but a connectional problem with recent kiln pairs has also limited the degree of operational success. The problem did not mask the potential of the MK kiln, as will be shown. Additional anticipated benefits to the owners of MK kilns, such as reduced operating cycles and decreased quantities of fuel, also have been verified. Key measurements made during all of the burns were of aerosol densities and buoyancies in the flues, kiln temperatures, and, on a number of occasions, chemical analyses of both aerosol and gaseous effluents. Continuous time histories of aerosol densities for most burns (of a total of -40) provide a basis for examining features and the effects of differing styles of operation with respect to burn efficiency and net contaminant masses. Covering the active kiln with a dome produces a net reduction in dry aerosol effluent mass of a factor between 5 and 10, whereas the addition of a filter kiln produces a net reduction of about a factor of 2. The use of used motor oil as a fuel further reduced aerosol contamination by -1 order of magnitude.     

A simple model which predicts some non-linear features between atmospheric sulphur and sulphur emissions

This paper develops a simple model and suggests a plausible chemico-physical mechanism for a non-linear response between atmospheric sulphur and sulphur emissions. It contains simplified representations of transport, deposition and conversion processes and uses a proxy in-cloud oxidant-limited reaction along a pathway connecting an emission source with a receptor site. Individual pathway responses to emissions show linear behaviour above a threshold. However, by averaging the values of SO2 at the receptor site from different pathways a continuous non-linear relationship is obtained. As emissions reduce, distant emission sources become less significant contributors of sulphur dioxide at a receptor site but their emissions are still counted in an emission inventory, leading to an apparent non-linearity. Sulphate is always found to contribute a signal to the receptor site total. This model goes someway to explaining a proposed 'crossover' between observed proportions of wet and dry deposited sulphur in the UK as emissions have been reduced.     

Effect of advanced oxidants generated via ultraviolet light on a sequentially loaded and regenerated granular activated carbon biofilter

The objective of this research was to investigate a sequentially loaded and regenerated granular activated carbon (GAC) biofilter system and to determine whether regenerative ozonation/advanced oxidation could improve the removal and biodegradation of a volatile organic compound from a contaminated airstream. Bench-scale reactors were constructed to operate in a manner analogous to a commercially available system manufactured by Terr-Aqua Environmental Systems (only with longer contact time). The GAC system consisted of two GAC biofilter beds that operated in a cyclical manner. On a given day, the first GAC bed adsorbed methyl isobutyl ketone from a simulated waste airstream, while the second bed underwent regeneration; then on the next day, the second bed was in the adsorption mode while the first was regenerated. Three bench-scale systems were used to compare the performance under three operating conditions: (1) ozone/ associated oxidant regeneration of a GAC biofilter system that was seeded with microorganisms from a field site, (2) a humid air regeneration of a seeded GAC biofilter, and (3) a humid air regeneration of an unseeded GAC biofilter. For the advanced oxidant regenerated GAC biofilter, a maximum removal efficiency of >95% was achieved with an empty bed contact time of 148 sec and an influent concentration of 125 ppm methyl isobutyl ketone, and 90-95% was achieved at 148-sec empty bed contact time and a 1150-ppm influent.     

Formulation of a soil-pesticide transport model based on a compartmental approach

A semianalytical soil-pesticide transport model is formulated based on a compartmental approach to determine spatial and temporal variations of pesticide residues across a soil profile. The compartmental model is implemented by drawing an analogy between a series of continuous-flow stirred tank reactors and a soil horizon that consists of multiple perfectly mixed compartments. The analogy is strengthened by exploiting a relation between the compartment series and the conventional convective-dispersive equation (CDE) for vertical transport in the soil. Consequently, the number of compartments in the model formulation is not free, but dictated as a function of transport parameters. The model formulation allows consideration of arbitrary boundary value specifications and also, for some cases, spatially varying initial concentration profiles. Sorption kinetics is represented via a two-site model that involves a linear sorption isotherm and a first-order irreversible sorption or a radial diffusive penetrating model. For these three cases, analysis of the compartmental model allows the resultant concentration profiles to be expressed in terms of the Poisson distribution. When a nonlinear kinetic sorption model is used to simulate the sorption processes, an analytical solution is not found and a numerical approach is required.     

The current state of knowledge of ecosystems and ecosystem services in Russia: A status report

This paper focusses on a conceptual overview of ways to address a comprehensive analysis of ecosystem services (ES) in a country as large and heterogeneous as Russia. As a first step, a methodology for assessing the services for the federal subjects of Russia was chosen, i.e., its constituent provinces and similar entities, in physical terms. Russia harbors a great diversity of natural conditions and ecosystems which are suppliers of ES, and likewise a variety of the socio-economic conditions that shape the demand for these services and their consumption. The methodological approach described permits several important tasks to be addressed: the evaluation of the degree of satisfaction of people’s needs for ES, the identification of ecological donor and acceptor regions, and zoning of the country’s territory for ES assessment. The next step is to prepare a prototype of a National Report on ES in Russia, for which we are presenting the planned structure.     

Smokeless Stacks—Industry’s Big Problem

There seems to be a general impression on the part of the public and many technical people that dust collecting systems on the open hearth furnace are simply a matter of giving a contract for a duplicate system to that previously installed; signing a check for a sum to cover the cost of the cleaning equipment itself, pressing the start-up button and then sitting back to receive the plaudits of a grateful community. This paper will briefly present some of the problems common to all of the installations to date. It will also explain why the cost of the cleaning equipment itself is such a small portion of the total cost.     

Numerical Modeling of the Transport Diffusion and Deposition of Pollutants For Regions and Extended Scales

There is an emerging need to develop understanding and predictive capability for the transport, diffusion, and deposition of pollutants on regional and extended spatial scales. Some recent developments in the numerical simulation of pollutant transport and diffusion are reviewed and summarized herein, including case studies of model validation whenever’available. The efforts reported include: (a) the development and verification of a Lagrangian large-cloud diffusion code for intermediate to extended scales; (b) a hybrid Lagrangian-Eulerian transport-diffusion code for simulating pollutant distributions in transient stratified shear flow; (c) a meteorological submodel for determining a mass-consistent wind field on a regional scale suitable as input to a regional air pollution model; and (d) the development and initial verification of a multi-box regional air pollution model for the San Francisco Bay Area utilizing a mass-consistent wind field submodel.     

Total and Methylmercury in Soft Tissues of White-Tailed Eagle (Haliaeetus albicilla) and Osprey (Pandion haliaetus) Collected in Poland

Mercury (Hg) contamination in piscivorous birds, especially methylmercury (MeHg), has been drawing much attention worldwide in regard to its bioaccumulation and biomagnification in food chains. In this study on Hg in the soft tissues of white-tailed eagles (n = 22) and ospreys (n = 2) from Poland, total Hg (THg) range was 0.15–47.6 while MeHg range was 0.11–8.05 mg kg⁻¹ dry weight. In both species, median THg and MeHg concentrations were lower in the muscle and brain than in the liver and kidney. Median nephric residues were just under 3 and 5 mgTHg kg⁻¹ or 0.9 and 3.7 mgMeHg kg⁻¹ for white-tailed eagle and osprey, respectively. In Norwegian data from the 1970s and in our results, MeHg in the muscle of white-tailed eagle was ~60 % THg (%MeHg = MeHg/THg × 100), lower than in other piscivorous birds. A clear similarity in THg tissue levels was found between Polish and German populations of white-tailed eagles.     

Humans and Ecosystems Over the Coming Millennia: Overview of a Biosphere Assessment of Radioactive Waste Disposal in Sweden

This is an overview of the strategy used to describe the effects of a potential release from a radioactive waste repository on human exposure and future environments. It introduces a special issue of AMBIO, in which 13 articles show ways of understanding and characterizing the future. The study relies mainly on research performed in the context of a recent safety report concerning a repository for spent nuclear fuel in Sweden (the so-called SR-Site project). The development of a good understanding of on-site processes and acquisition of site-specific data facilitated the development of new approaches for assessment of surface ecosystems. A systematic and scientifically coherent methodology utilizes the understanding of the current spatial and temporal dynamics as an analog for future conditions. We conclude that future ecosystem can be inferred from a few variables and that this multidisciplinary approach is relevant in a much wider context than radioactive waste.     

Modelling radionuclide transport for time varying flow in a channel network

Water flowrates and flow directions may change over time in the subsurface for a number of reasons. In fractured rocks flow takes place in channels within fractures. Solutes are carried by the advective flow. In addition, solutes may diffuse in and out of stagnant waters in the rock matrix and other stagnant water regions. Sorbing species may sorb on fracture surfaces and on the micropore surfaces in the rock matrix. We present a method by which solute particles can be traced in flowing water undergoing changes in flowrate and direction in a complex channel network where the solutes can also interact with the rock by diffusion in the rock matrix. The novelty of this paper is handling of diffusion in the rock matrix under transient flow conditions. The diffusive processes are stochastic and it is not possible to follow a particle deterministically. The method therefore utilises the properties of a probability distribution function for a tracer moving in a fracture where matrix diffusion is active. The method is incorporated in a three dimensional channel network model. Particle tracking is used to trace out a multitude of flowpaths, each of which consists of a large number of channels within fractures. Along each channel the aperture and velocity as well as the matrix sorption properties can vary. An efficient method is presented whereby a particle can be followed along the variable property flowpath. For stationary flow conditions and a network of channels with advective flow and matrix diffusion, a simple analytical solution for the residence time distribution along each pathway can be used. Only two parameter groups need to be integrated along each path. For transient flow conditions, a time stepping procedure that incorporates a stochastic Monte-Carlo like method to follow the particles along the paths when flow conditions change is used. The method is fast and an example is used for illustrative purposes. It is exemplified by a case where land rises due to glacial rebound. It is shown that the effects of changing flowrates and directions can be considerable and that the diffusive migration in the matrix can have a dominating effect on the results.     

Optimization of the intermittent aeration in a full-scale wastewater treatment plant biological reactor for nitrogen removal.

The optimization of the intermittent aeration in a full-scale biological reactor treating municipal and industrial wastewater has been studied by means of an experimental design, where the main factors considered have been the on-off period of aeration and the dissolved-oxygen set point. The objective of the work has been to determine the optimal configuration of the aeration control to achieve a simultaneous removal of carbon (expressed as chemical oxygen demand [COD]) and nitrogen. The results were obtained in a full-scale bioreactor located at the wastewater treatment plant of Sant Celoni (Barcelona, Spain), where a nitrogen removal based on a nitrification-denitrification process is being tested. It has been shown that the crucial parameter to ensure a complete removal of COD and nitrogen is to give the system a long time of on-off aeration to complete both the nitrification and the denitrification processes, whereas the dissolved-oxygen set point has a minor influence on the overall performance. The results presented can be applied to a great number of similar systems, in which a nitrogen removal, based on a nitrification-denitrification scheme, is currently being tested or implemented.     

Surrogate Model-Based Simulation-Optimization Approach for Groundwater Source Identification Problems

This study investigates and discusses a time-efficient technology that contains a surrogate model within a simulation-optimization model to identify the characteristics of groundwater pollutant sources. In the proposed surrogate model, Latin hypercube sampling (a stratified sampling approach) and artificial neural network (commencing at the stress period when the concentration is within a certain range, and ending at the peak time) were utilized to reduce workload and costly computing time. The results of a comparison between the proposed surrogate model and the common artificial neural network model and non-surrogate model indicated that the proposed model is a time-efficient technology which could be used to solve groundwater source identification problems.     

The integrated biomarker response revisited: optimization to avoid misuse

The growing need to evaluate the quality of aquatic ecosystems led to the development of numerous monitoring tools. Among them, the development of biomarker-based procedures, that combine precocity and relevance, is recommended. However, multi-biomarker approaches are often hard to interpret, and produce results that are not easy to integrate in the environmental policies framework. Integrative index have been developed, and one of the most used is the integrated biomarker response (IBR). However, an analysis of available literature demonstrated that the IBR suffers from a frequent misuse and a bias in its calculation. Then, we propose here a new calculation method based on both a more simple formula and a permutation procedure. Together, these improvements should rightly avoid the misuse and bias that were recorded. Additionally, a case study illustrates how the new procedure enabled to perform a reliable classification of site along a pollution gradient based on biomarker responses used in the IBR calculations.     

Concurrent 2,4-D and triclopyr biomonitoring of backpack applicators, mixer/loader and field supervisor in forestry

Two herbicides, 2,4-D and triclopyr esters (application ratio 1.6:1 acid equivalents) were applied as a tank mix by a crew of 8 backpack sprayer applicators, a mixer/loader, and a field supervisor. The crew was employed in a conifer release program in northern California during the summer of 2002. Biomonitoring (urine, 24 h) utilized 2,4-D and triclopyr (a.e.) as rapidly excreted exposure biomarkers. The absorbed dosages of 2,4-D and triclopyr were calculated based upon cotton whole body suits and biomonitoring. Dosages based upon accumulation of the herbicides on body suits averaged 42.6 μg (a.e.) 2,4-D/kg-d and 8.0 μg (a.e.) triclopyr/kg-d. Six consecutive days of concurrent urine collections showed that backpack applicators excreted an average of 11.0 μg (a.e.) 2,4-D/kg-d and 18.9 μg (a.e.) triclopyr/kg-d. Estimates based upon curve fitting were 17.1 and 29.3 μg (a.e.)/kg-d, respectively. Results suggest that passive dosimetry for 2,4-D consistently overestimated the dosage measured using biomonitoring by a factor of 2-3 fold, while for triclopyr, passive dosimetry underestimated the absorbed dose based on biomonitoring by a factor of 2-4 fold.     

A rapid spectrophotometric determination of persulfate anion in ISCO

Due to a gradual increase in the use of persulfate as an in situ chemical oxidation (ISCO) oxidant, a simple measurement of persulfate concentration is desirable to analyze persulfate distribution at designated time intervals on/off a site. Such a distribution helps evaluate efficacy of ISCO treatment at a site. This work proposes a spectrophotometric determination of persulfate based on modification of the iodometric titration method. The analysis of absorption spectra of a yellow color solution resulting from the reaction of persulfate and iodide in the presence of sodium bicarbonate reveals an absorbance at 352 nm, without significant interferences from the reagent matrix. The calibration graph was linear in the range of persulfate solution concentration of 0-70 mM at 352 nm. The proposed method is validated by the iodometric titration method. The solution pH was at near neutral and the presence of iron activator does not interfere with the absorption measurement. Also, analysis of persulfate in a groundwater sample using the proposed method indicates a good agreement with measurements by the titration method. This proposed spectrophotometric quantification of persulfate provides a simple and rapid method for evaluation of ISCO effectiveness at a remediation site.     

A study on the characteristics of silt loading on paved roads in the Seoul metropolitan area using a mobile monitoring system

This study is considered the first attempt to apply a mobile monitoring system to estimating silt loading on paved roads in a mega-city such as the Seoul metropolitan area. Using a mobile monitoring system developed in 2005, we estimated silt loadings on representative paved roads in the Seoul metropolitan area, including the city of Incheon, over a period of 3 yr. The temporal and spatial characteristics of silt loading were investigated for the carefully selected roads that may reflect the characteristics of the cities of Seoul and Incheon. In this study, changes in the average silt loading values were investigated in terms of land use, the temporal resolution of data acquisition (i.e., seasonal, daily, three-hour scale), the road width or number of lanes, and rainfall, which may affect the characteristics of the average silt loading significantly. It was found that the advantages of using the mobile monitoring system are its ability to obtain a large quantity of silt loading data in a short period of time and over a wide area and its ability to create a silt loading map showing the relative magnitude of silt loading in relation to a specific location, which makes it possible to easily locate hot spots.

Implications: This study may be considered the first practical application of a mobile monitoring system to obtain the silt loading data on paved roads in a mega-city such as Seoul. It was found that the advantages of using the mobile monitoring system are its ability to obtain a large quantity of silt loading data in a short period of time and over a wide area and its ability to create a silt loading map showing the relative magnitude of silt loading in relation to a specific location, which makes it possible to easily locate hot spots to be cleaned cost-effectively by city officials.     

北京气温与小儿呼吸道疾病相关性研究

本文研究了北京大气温度的变化与小儿呼吸道疾病的关系，结果表明北京大气温度升高与小儿呼吸道疾病的发生率呈负相关，ｒｓ＝０．５３０，ｐ＜０．０１，北京冬季小儿呼吸道疾病为小儿疾病发生率的首位，而且呈周期性变化，本文还讨论了小儿呼吸道疾病的病因及其防治。     

Characterizing the source/sink behavior of double-layer building materials

A model is developed to predict the rate of mass transfer between a double-layer material and indoor air. The model allows non-uniform initial material-phase concentrations in each of the two layers and a transient influent gas-phase concentration to be considered. This model builds on a recently validated single-layer model and should prove useful in predicting the behavior of double-layer material assemblies. Many indoor furnishings and building structures are comprised of layers of different material. The approach taken here represents a first step in the development of a more generally applicable multi-layer model. An analytical solution to the double-layer model is obtained and a parametric analysis is performed illustrating the behavior of the model as a function of the primary model parameters. The paper concludes by examining the potential use of thin diffusion barriers to reduce material emission rates and a hypothetical example of emissions from an adhesive that is part of an adhesive/material assembly.     

The effect of emissions of fertilizer production on the environment contamination by cadmium and arsenic in southern Brazil

The distribution of cadmium and arsenic in rainwater, surface soil and groundwater in a zone of influence of emissions of a phosphate fertilizer factory has been investigated. The analysis of rainwater along a wind line shows that cadmium in the soluble form precipitates close to emission source, whereas arsenic migrates further and also in the soluble form precipitates at a greater distance. The pH controls the distribution of cadmium and arsenic in rain and groundwater. Concentration of soluble cadmium along the impact line increases with reduction of pH and arsenic, contrary to the increase of pH. Concentrations of cadmium and arsenic in surface soil correlate well among themselves near to emission point. In a zone of confluence of emissions with sea air at a distance from the factory there is sedimentation of arsenic on a geochemical barrier and formation of a separate anomaly in soil.