Effects of sensitizers on the photodegradation of the systemic fungicide triadimenol

The photochemical behaviour of triadimenol (1) under various conditions has been examined. Significant degradation is obtained only in the presence of electron-acceptor sensitizers as 9,10-dicyanoanthracene or 2,4,6-triphenylpyrylium tetrafluoroborate, and long irradiation times are required. 1H-1,2,4-Triazole (2), 4-chlorophenyl formate (3), 4-chlorophenol (4), 1-(4-chlorophenoxy)-3,3-dimethyl-1-(1H-1,2,4-triazol-1-yl)butan-2-one (5), 4-chlorophenyl 2,2-dimethylpropanoate (6) and 4-chlorobenzoic acid (7) were identified as photoproducts by NMR and GC-MS.     

Bacterial diversity in paclobutrazol applied agricultural soils

The aim of this study was to investigate the bacterial communities on paclobutrazol [(2RS, 3RS)-1-(4-Chlorophenyl)-4, 4-dimethyl-2-(1H-1,2,4-triazol-1-yl) pentan-3-ol]–applied agricultural soils by denaturing gradient gel electrophoresis (DGGE) of polymerase chain reaction (PCR) amplified 16S rDNA gene fragments. Three different agricultural soil samples were collected from paclobutrazol applied mango and waxapple orchards, peanut fields and untreated rice fields as a control for DGGE analysis. The DGGE pattern of PCR- generated 16S rDNA gene fragments indicated that the bacterial populations from four paclobutrazol–applied soils of peanut fields were closely related to each other and two paclobutrazol–applied soils of mango and waxapple orchards harbored closely related bacterial communities. But, paclobutrazol–free agricultural soils comprised relatively a different bacterial group. However, the bacterial populations of mango and waxapple orchard are completely different from the bacterial communities of peanut field. Further purification and sequence analysis of 40 DGGE bands followed by phylogenetic tree assay showed similar results that soil bacteria from paclobutrazol applied mango and waxapple orchard are phylogenetically related. Based on the phylogenetic analysis, the clone M-4 was clad 100 % (bootstrap value) with Mycobacterium sp. The Mycobacterium sp. has been proved to degrade the phenolic compounds such as phenol, 4-chlorphenol, 2,4-dichlorophenol and paclobutrazol molecule containing chlorobenzene ring.     

Environmental transformation of triadimefon in water and on plant leaf surface

Phototransformation of triadimefon was studied in aqueous solution and on plant leaf surface under natural and simulated conditions. Photoproducts such as 4-chlorophenol, 1-(4-chlorophenoxy)-3,3-dimethyl-1-(1,2,4-triazole-1-yl)-butan-2-ol and 1-phenoxy-3,3-dimethyl-but-2-one were identified on leaf as well as in aqueous solution. A new photoproduct product 1-(4-chlorophenoxymethyl)-1,2,4-triazole was identified only on the leaf surface. The rate of degradation was more in tap water as compared to rain and distilled water.     

Persistence of hexaconazole, a triazole fungicide in soils

Persistence of hexaconazole (2-(2,4-dichlorophenyl)- 1-(1H-1,2,5-triazol-1-yl) hexan-2-ol) was studied in alluvial, red and black soils under flooded and nonflooded conditions. This fungicide was more persistent in all soils under flooded conditions than under nonflooded conditions and at 27 degrees C than at 35 degrees C. Degradation of hexaconazole in sterilized and nonsterilized soils proceeded at identical rates indicating a minor role of micro-organisms in its degradation. The soil persistence of hexaconazole was not affected by the addition of wheat straw both under flooded and nonflooded conditions.     

Rapid removal of flutriafol in water by zero-valent iron powder

A study of the effect of zero-valent iron (ZVI) powder is carried out for the first time on the degradation of flutriafol ((RS)-2,4'-difluoro-alpha-(1H-1,2,4-triazol-1-ylmethyl)-benzhydryl alcohol, C(16)H(13)F(2)N(3)O), a bifluorinated soil and water persistent triazole pesticide using a laboratory scale device consisting of a 20 ml pyrex serum vials fixed to a Vortex agitator. Different amounts of ZVI powder (10-50 g l(-1)) at pH 6.6 and room temperature were investigated. Experiments showed an observed degradation rate k(obs) directly proportional to the surface of contact of flutriafol with ZVI. Flutriafol degradation reactions demonstrated first order kinetic with a half-live of about 10.8+/-0.5 min and 3.6+/-0.2 min when experiments were conducted at [ZVI]=10 g l(-1) into oxygenated and anoxic solutions, respectively. Three analytical techniques were employed to monitor flutriafol degradation and to understand solution and by-products behaviors: (1) A UV-Vis spectrophotometer; (2) a high performance liquid chromatography (HPLC) coupled with a photo diode array (PDA) and fluorescence detectors; (3) a similar HPLC coupled with a PDA and a mass spectrometer detectors equipped with an atmospheric pressure photoionization source. Results showed a complete disappearance of flutriafol after 20 min of contact with ZVI, the loss of fluorescence properties of the final by-products, the defluorination of the triazole pesticide via hydroxylation reaction and finally the hydrogenation of the triazole ring.     

Retention capacity of an organic bio-mixture against different mixtures of fungicides used in vineyards

A laboratory experiment was carried out to test the efficiency of a bio-mixture made up of pruning residues at two (PR2) and five (PR5) years of composting and wheat straw (STW) in the biological cleaning of water contaminated by different mixtures of fungicides usually employed in vineyards. The experiment was conducted and reproduced at a scale of 1:100 of operating field conditions. Commercial formulates of penconazole (PC), (RS)-1-[2-(2,4-dichlorophenyl)pentyl]-1H-1,2,4-triazole), dimetomorph (DM), (EZ)-4-[3-(4-chlorophenyl)-3-(3,4-dimethoxyphenyl)acryloyl]morpholine), azoxystrobin (AZ), (methyl (E)-2-{2-[6-(2-cyanophenoxy)pyrimidin-4-yloxy]phenyl}-3-methoxyacrylate), iprovalicarb (IP), (isopropyl 2-methyl-1-[(RS)-1-p-tolylethyl]carbamoyl-(S)-propylcarbamate), metalaxyl (MX), (methyl N-(methoxyacetyl)-N-(2,6-xylyl)-DL-alaninate), fludioxonil (FL), (4-(2,2-difluoro-1,3-benzodioxol-4-yl)-1H-pyrrole-3-carbonitrile) and cyprodinil (CY), (4-cyclopropyl-6-methyl-N-phenylpyrimidin-2-amine) were mixed in water and discharged into the bio-mixture following the time schedule of the treatments carried out in the grapevine in real field conditions. At each treatment, contaminated water with fungicides was circulated repeatedly through the bio-mixture to enhance the sorption of fungicides. In fact, it retained them between 98–100% with the exception of MX of which it was able to retain only 90.5%. The adsorption/desorption experiment showed that repeated circulation of water, instead of enhancing MX retention, can easily remove about 30% of MX already adsorbed by the bio-mixture. This finding suggests that water contaminated by very mobile pesticides should be discharged at the end of field treatments without re-circulating the water in order to avoid the release of pesticides weakly adsorbed on the bio-mixture.     

Preliminary evaluation of bitumen contamination in environmental samples using comprehensive gas chromatography GcxGc – Time of flight mass spectrometry (GCxGC-TOFMS)

Abstract

Bitumen and bitumen impacted soil and water samples were investigated for their relative chemical composition using comprehensive gas chromatography GcxGc – time of flight mass spectrometry (GCxGC-TOFMS). The results reveal the presence of key compounds which could serve as environmental biomarkers for bitumen impacted soils and aquifers. Prominent alkanes such as 3-methylpentane; 2,2,4-trimethylpentane; 1,3,5-trimethyladamantane; 2,6,10-trimethyldodecane; 3-ethyl-2,2-dimethyl pentane were tentatively identified and are likely potent biomarkers in environmental forensic assessment of bitumen contamination while the presence of some aromatic compounds: 1,2-benzenedicarboxylic acid, 1,2-dimethyl-3-propylbenzene; 3,4-bis(methoxycarbonyl)benzoic acid; 1,3-bezenedicarboxylic acid, 1,2-benzenediol; 1,3-dimethylbenzene; 1,2-2-(2-ethylhexoxycarbonyl)benzoic acid; (4-methylpentan-2-yl)benzene; 2,4-dimethyl benzo(H)quinolone will further confirm the bitumen contamination in an area under investigation. A host of additional compounds were tentatively identified, mainly in the bitumen samples. The results obtained in this study provides baseline data for effective monitoring, and source apportionment of oil/oil products spills.     

Transformation products and reaction kinetics of fragrances in advanced wastewater treatment with ozone

The reaction of the fragrance compounds 4,6,6,7,8,8-hexamethyl-1,3,4,7-tetrahydrocyclopenta[g]isochromene (HHCB), 1-(3,5,5,6,8,8-hexamethyl-6,7-dihydronaphthalen-2-yl)ethanone (AHTN), 1-tert-butyl-3,5-dimethyl-2,4,6-trinitrobenzene (musk xylene/MX), 1-(4-tert-butyl-2,6-dimethyl-3,5-dinitrophenyl)ethanone (musk ketone/MK), and 1-(2,3,8,8-tetramethyl-1,3,4,5,6,7-hexahydronaphthalen-2-yl)ethanone (OTNE) with ozone in tap water as well as waste water treatment plant (WWTP) effluents is described. Several transformation products are characterized by means of gas chromatography coupled to mass spectrometry. One transformation product (HHCB-Lactone) was confirmed by means of a true standard. Musk xylene and musk ketone do not react with ozone under the conditions used in this study. AHTN and HHCB reacted slowly to a multitude of transformation products, while OTNE reacted quickly to several stable transformation products. The reaction constants and half lives are used to predict removal efficiencies for full scale reactors.     

Spectral characterization of two bioaccumulated methoxylated polybrominated diphenyl ethers

Two methoxylated polybrominated diphenyl ethers (MeO-PBDEs) were isolated from a True's beaked whale (Mesoplodon mirus) and identified by NMR (1H, 1H-1H and 1H-13C) and high resolution mass spectrometry as 2-(2',4'-dibromophenoxy)-3,5-dibromoanisole (6-MeO-BDE47) and 2-(2',4'-dibromophenoxy)-4,6-dibromoanisole (2'-MeO-BDE68). Previously the structures of these bioaccumulated compounds have been determined by comparison of their mass spectra and gas chromatographic (GC) retention times with those of authentic standards. While this method is accepted and generally successful, NMR of the isolated compounds allows us to definitively identify the congeners. Our characterizations are consistent with those made for MeO-PBDEs in other organisms, identified by chromatographic methods.     

Photolysis of vinclozolin

Following photolysis of vinclozolin in methanol five products were detected and identified: 3,5-dichlorophenylisocyanate, 3,5-dichloroaniline, methyl 3,5-dichlorophenylcarbamate, 3-(3-chlorophenyl)-5-methyl-5-vinyl-oxazolidine-2,4-dione and methyl (3,5-dichlorophenyl) (2-hydroxy-2-methyl-1-oxo-buten-3-yl) carbamate. The major component identified from photolysis in benzene solution, 3-(3-chlorobiphenyl)-5-methyl-5-vinyl-oxazolidine-2,4-dione, was produced by replacement of one chlorine atom by a solvent molecule.     

Enhanced adsorptive removal of naphthalene intermediates from aqueous solution by introducing reed straw into sewage sludge-based activated carbon

The disposal of sewage sludge (SS) and reed straw (RS) has becoming a critical issue due to their rapid production. In this study, the SS-based activated carbon (SSC) was produced by introducing the RS as a component material. Properties including BET surface area, pore volume, surface chemical groups, and morphologies were characterized. The adsorption of 1-diazo-2-naphthol-4-sulfonic acid (1,2,4-Acid) and 2-Naphthol (2-Nap), which differs in their physicochemical properties, on as-prepared carbons were investigated. The overall adsorption was found to be jointly controlled by external mass transfer and intraparticle diffusion, and the optimal pH was found to be 5 due to their electrostatic attraction. Further study revealed that the SS- and RS-based carbons (SC and RSC, respectively) exhibited different adsorption behavior toward 1,2,4-Acid and 2-Nap. The calculated adsorption capacity from Langmuir–Freundlich model of SC and RSC for the two intermediates was 141.0, 84.6 mg g^-1 and 48.2, 110.2 mg g^-1, respectively, whereas their hybrid product (SSC) showed comparable capacity for 1,2,4-Acid (117.8 mg g^-1), as well as higher capacity for 2-Nap (157.5 mg g^-1). It was found that the presence of meso- or macropores facilitates the precipitation of mineral phases of inorganic substances during carbonization, attracting the molecules with polar functional groups, while the introduction of C-rich RS to SS enhances the adsorption of hydrophobic molecules.     

Separation, synthesis and estrogenic activity of 4-nonylphenols: two sets of new diastereomeric isomers in a commercial mixture

Two sets of new diastereomeric 4-nonylphenol (NP) isomers [4-(3,4-dimethylheptan-4-yl)phenol (344NP, NP-J, L) and 4-(3,4-dimethylheptan-3-yl)phenol (343NP, NP-K, P)] were separated from a commercial NP mixture. The mixture of these diastereomers was synthesized at the same time by a single Friedel-Crafts reaction of 3,4-dimethyl-4-heptanol and phenol, and the mixture was separated into individual NPs by HPLC equipped with Hypercarb column. For the first time, in this study the stereostructure-estrogenic activity relationship of NP diastereomers was investigated. The NP isomers (NP-L and NP-P) having the beta-methyl group over the benzene ring were found to be 2-4 times more estrogenic than their diastereomers (NP-J and NP-K). In the case of the other set of diastereomer [4-(3,5-dimethylheptan-3-yl)phenol, (353NP, NP-E, G)] containing gamma-methyl group in the molecule, the gamma-methyl proton signal (delta 0.49) in the more estrogenic isomer (NP-G) also appeared in a higher field than the corresponding methyl signal (delta 0.76) of the less estrogenic isomer (NP-E).     

Organochlorine contaminants in narwhal (Monodon monoceros) from the Canadian Arctic

Organochlorine pesticides (DDT, chlordane, polychlorinated camphenes (PCCs), dieldrin, hexachloroheclohexanes (SigmaHCH), mirex), polychlorinated biphenyl congeners (PCBs) and chlorobenzenes (SigmaCBz) were determined in blubber and liver of narwhal (Monodon monoceros) collected during 1982-1983 from Pond Inlet on northern Baffin Island in the Canadian Arctic. PCCs were the predominate organochlorines in narwhal blubber, ranging in concentration from 2990 to 13 200 ng g(-1) (wet wt) in males and from 1910 to 8390 ng g(-1) in females. PCCs consisted of two major components, an octachlorobornane and a nonachlorobornane with gas chromatographic retention times of 1.05 and 1.22, relative to 4,4'-DDE. SigmaPCB concentrations in blubber ranged from 2250 to 7290 ng g(-1) in males and from 894 to 5710 ng g(-1) in females. Seven PCB congeners (tetra-, penta- and hexachlorobiphenyls) accounted for 45% of total PCB (SigmaPCB) in narwhal blubber. Narwhal had 1.4- to 8.6-fold higher ratios of tetra- and pentachlorobiphenyls to PCB-153 (2,2',4,4',5,5'-hexachlorobiphenyl), lower 4,4'-DDE/SigmaDDT ratios and lower proportions of trans-nonachlor to total chlordane components than reported for odontocetes living in more contaminated environments. Mean SigmaPCB concentrations in narwhal were 6- to 15-fold lower than in dolphins from the Canadian east coast and belugas from the St Lawrence River estuary, respectively, while PCC levels were from 4- to about 2-fold lower, and SigmaHCH, dieldrin and SigmaCBz differed by <2-fold. The pattern of organochlorines in narwhal tissues suggests they are exposed to proportionally more volatile compounds, and may have less capacity to metabolize some of these compounds, relative to odontocetes living nearer sources of these contaminants.     

Comparative toxicities of the polychlorinated dibenzofuran (PCDF) and biphenyl (PCB) mixtures which persist in Yusho victims

The toxic Yusho oil contained a mixture of polychlorinated biphenyls (PCBs) which were contaminated by other halogenated aromatics including the highly toxic polychlorinated dibenzofurans (PCDFs). It has been reported that the PCBs and PCDFs which persist in the liver of victims still suffering from Yusho poisoning include the following compounds; 2,3′,4,4′,5-penta-,2,2′,4,4′,5,5′-,2,2′,3′,4,4′,5- and 2,3,3′,4,4′,5-hexa, 2,2′,3,4,4′,5,5′- and 2,2′,3,3′,4,4′,5-heptachlorobiphenyls and the 2,3,7,8-tetra-, 1,2,4,7,8-, 1,2,3,7,8- and 2,3,4,7,8-penta- and 1,2,3,4,7,8-hexachlorodibenzofurans. All of these PCBs and PCDFs have been synthesized and reconstituted to approximate their composition in human liver. A comparison of the dose-response effects of the reconstituted PCB and PCDF mixtures in causing weight loss, thymic atrophy and the induction of cytochrome P-448-dependent monooxygenases indicated that the PCDF mixture was at least 700 times more active than the PCBs. Since the ratio of PCBs/PCDFs persisting in Yusho patients' blood and liver was less than 600:1 and 5:1 respectively, the results suggest that the PCDFs are the major etiologic agent in Yusho poisoning.     

Influence of dispersants on bioconcentration factors of seven organic compounds with different lipophilicities and structures

Seven compounds with different lipophilicities and structures—1,3,5-trichlorobenzene, pentachlorobenzene, acenaphthylene, 1,4-dimethyl-2-(1-methylphenyl)benzene, 4-ethylbiphenyl, 4,4′-dibromobiphenyl, and 1,1,1-trichloro-2,2-bis(4-chlorophenyl)ethane—were subjected to bioconcentration tests in carp at concentrations below the water solubilities of the compounds in the presence or absence of a dispersant (either an organic solvent or a surfactant). The bioconcentration factors (BCFs) of the compounds were on the order of 10²–10⁴. The BCF values remained in the range of 15–49% for all the compounds, whether or not a dispersant was present, i.e., the BCF values in the presence of an organic solvent or a surfactant at a concentration below the critical micelle concentration were not significantly smaller than the BCF values in the absence of the solvent or surfactant. This result indicates that the dispersants had no influence on the evaluation of the bioconcentration potential of these test substances.     

Identification of a novel fluorescent adduct formed in the reaction of malonaldehyde with adenosine

Malonaldehyde was reacted with adenosine in aqueous solution at acidic conditions and the reaction mixtures were analysed by HPLC. Four major product peaks were observed in the chromatogram recorded by the UV detector at 320 nm. Two of the peaks could be deduced to the previously characterised malonaldehyde-adenosine reaction product 9-(beta-D-ribofuranosyl)-6-(5,7-diformyl-2H-3,6-dihydro-2,6-methano-1,3-oxazocin-3-yl)purine (M3A) and to the ribose analogue of the 2'-deoxy adduct 9-(2'-deoxy-beta-D-ribofuranosyl)-6-(3,5-diformyl-4-methyl-1,4-dihydro-1-pyridyl)purine (M2AA-dA). The two other peaks were due to previously uncharacterised adducts. Upon isolation of these adduct peaks it was found that the peaks are interconverted to each other, one adduct peak dominating over the other one. On the basis of data recorded by UV, fluorescence and 1H NMR spectroscopy, and mass spectrometry, the structure of the major adduct could be determined as 9-(beta-D-ribofuranosyl)-6-(3,5-diformyl-4-etanal-1,4-dihydro-1-pyridyl)purine (3M-A). The adduct is most likely formed by reaction of adenosine with a malonaldehyde condensation product consisting of three units of malonaldehyde. The highest yield of 3M-A was obtained in the reaction performed at pH 4.6 and 80 degrees C for 75 h. The minor form of the interconverting peaks could not be characterised on the basis of the spectral data. However, it is concluded that the minor peak most likely represents the hydrated form of 3M-A. Since these adducts are formed only in trace amounts at neutral pH and 37 degrees C and the formation requires high amounts of malonaldehyde, it is likely that the adducts are not formed in DNA in vivo and thus not contribute to the malonaldehyde genotoxicity.     

Synthesis and bioefficacy evaluation of new 3-substituted-3,4-dihydro-1,3-benzoxazines

A new series of 1, 3-Benzoxazines were synthesized, characterized (¹H NMR and ¹³C NMR) and evaluated for their pesticidal activity. Six new 3-alkyl-3, 4-dihydro-4-methyl-2H-1, 3-benzoxazines (1-6) were prepared by hydroxymethylation of secondary amines with formaldehyde in 65–68% yields. These compounds were screened for there IGR activity against Spodoptera litura and for antifungal fungal activity in vitro against Sclerotium rolfsii ITCC 6181 by poisoned food technique. Insect Growth Regulatory (IGR) activity against Spodoptera litura showed that compound 3-Nonyl-3,4-dihydro-4-methyl-2H-1,3-benzoxazines was most effective as IGR with larval GI₅₀ of 1.863 μ g/Insect. Compounds 3-Octyl-3,4-dihydro-4-methyl-2H-1,3-benzoxazines and 3-Decyl-3,4-dihydro-4-methyl-2H-1,3-benzoxazines were effective IGRs. Antifungal screening revealed that compound 3-Dodecyl-3, 4-dihydro-4-methyl-2H-1,3-benzoxazines, was highly effective against Sclerotium rolfsii with LC₅₀ value 31.7 mg L^?1 comparable with commercial fungicide Hexaconazole (LC₅₀ 1.27 mg L^?1). Also compounds 3-Nonyl-3, 4-dihydro-4-methyl-2H-1,3-benzoxazines and 3-Decyl-3,4-dihydro-4-methyl-2H-1,3-benzoxazines displayed promising fungitoxicity. The results described in this paper are promising and provides new array of synthetic chemicals to be utilized as pesticides.     

Dissipation of difenoconazole in apples used for production of baby food

Dissipation of fungicide difenoconazole (3-chloro-4-[(2RS,4RS;2RS,4SR)-4-methyl-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-2-yl]phenyl 4-chlorophenyl ether) was studied following its application on apples intended for production of baby food. The apples (varieties: Jonagold Decosta, Gala and Idared) were sprayed with the formulation to control pathogens causing fungal diseases: powdery mildew (Podosphaera leucotricha ELL et Ev./Salm.) and apple scab (Venturia inaequalis Cooke/Aderh.). A validated gas chromatography-based method with simultaneous electron capture and nitrogen phosphorus detection (GC-ECD/NPD) was used for the residue analysis. The analytical performance of the method was highly satisfactory, with expanded uncertainties ≤ 19% (a coverage factor, k = 2, and a confidence level of 95%). The dissipation of difenoconazole was studied in pseudo-first-order kinetic models (for which the coefficients of determination, R², ranged between 0.880 and 0.977). The half-life of difenoconazole was 12–21 days in experiments conducted on three apple varieties. In these experiments, the initial residue levels declined gradually and reached the level of 0.01 mg kg^?1 in 50–79 days. For the residue levels to remain below 0.01 mg kg^?1 (the maximum acceptable concentration for baby foods), difenoconazole must be applied approximately 3 months before harvest, at a dose of 0.2 L ha^?1 (50 g of an active ingredient per ha).     

Photocatalytic degradation of the herbicide pendimethalin using nanoparticles of BaTiO3/TiO2 prepared by gel to crystalline conversion method: a kinetic approach

Photocatalytic degradation of the herbicide, pendimethalin (PM) was investigated with BaTiO3/TiO2 UV light system in the presence of peroxide and persulphate species in aqueous medium. The nanoparticles of BaTiO3 and TiO2 were obtained by gel to crystallite conversion method. These photo catalysts are characterized by energy dispersive x-ray analysis (EDX), scanning electron microscope (SEM), x-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET) adsorption isotherm and reflectance spectral studies. The quantum yields for TiO2 and BaTiO3 for the degradation reactions are 3.166 Einstein m(-2) s(-1) and 2.729 Einstein m(-2) s(-1) and catalytic efficiencies are 6.0444 x 10(-7) mg(-2)h(-1)L2 and 5.403 x 10(-7) mg(-2)h(-1)L2, respectively as calculated from experimental results. BaTiO3 exhibited comparable photocatalytic efficiency in the degradation of pendimethalin as the most widely used TiO2 photocatalyst. The persulphate played an important role in enhancing the rate of degradation of pendimethalin when compared to hydrogen peroxide. The degradation process of pendimethalin followed the first-order kinetics and it is in agreement with Langmuir-Hinshelwood model of surface mechanism. The reason for high stability of pendimethalin for UV-degradation even in the presence of catalyst and oxidizing agents were explored. The higher rate of degradation was observed in alkaline medium at pH 11. The degradation process was monitored by spectroscopic techniques such as ultra violet-visible (UV-Vis), infrared (IR) and gas chromatography mass spectroscopy (GC-MS). The major intermediate products identified were: N-propyl-2-nitro-6-amino-3, 4-xylidine, (2, 3-dimethyl-5-nitro-6-hydroxy amine) phenol and N-Propyl-3, 4-dimethyl-2, 6-dinitroaniline by GC-MS analysis and the probable reaction mechanism has been proposed based on these products.     

Insights into the dissolution and the three-dimensional structure of insensitive munitions formulations

Two compounds, 2,4-dinitroanisole (DNAN) and 3-nitro-1,2,4-triazol-5-one (NTO) are the main ingredients in a suite of explosive formulations that are being, or soon will be, fielded at military training ranges. We aim to understand the dissolution characteristics of DNAN and NTO and three insensitive muntions (IM) formulations that contain them. This information is needed to accurately predict the environmental fate of IM constituents, some of which may be toxic to people and the environment. We used Raman spectroscopy to identify the different constituents in the IM formulations and micro computed tomography to image their three-dimensional structure. These are the first three-dimensional images of detonated explosive particles.