Development of a accelerated solvent extraction and gel permeation chromatography analytical method for measuring persistent organohalogen compounds in adipose and organ tissue analysis

A new analytical method has been developed for the quantification of 59 different persistent organohalogen compounds, such as polybrominated diphenyl ethers (PBDEs), polychlorinated naphthalenes (PCNs), polychlorinated biphenyls (PCBs), PCB metabolites, organochlorine pesticides (OCPs) in biological organ tissues. The optimum extraction and cleanup procedures were examined using accelerated solvent extraction (ASE), automated gel permeation chromatography (GPC) on Biobeads S-X3 and automated solid phase extraction (SPE) on silica-gel. The target compounds were divided into two fractions, non-polar compounds and more polar compounds, which in the latter fraction was subsequently methylated using diazomethane. Detection can be achieved by GC/MS in negative chemical ionization (NCI) mode. The average recoveries of the compounds spiked in swine liver, heart, kidney, and cattle adipose tissues were considered satisfactory, and it was confirmed that the method could be used in routine analysis.     

Detailed characterization of polar compounds of residual oil in contaminated soil revealed by Fourier transform ion cyclotron resonance mass spectrometry

Effects of remediation technologies on polar compounds of crude oil in contaminated soils have not been well understood when compared to hydrocarbons. In this study, ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was used to characterize the changes in NSO polar compounds of crude oil and residual oil after long-term natural attenuation, biostimulation and subsequent ozonation following biostimulation of contaminated soils. N₁ and O₁ species, which were abundant in the crude oil, were selectively biodegraded, and species with higher double bond equivalent values and smaller carbon numbers appeared to be more resistant to microbial alteration. O₂-O₆ species were enriched by biodegradation and contained a large number of compounds with a high degree of unsaturation. Ozone could react with a variety of polar compounds in residual oil after biodegradation and showed high reactivity with polar species containing aromatic or multi-aliphatic rings, including the residual N₁ and O₁ species, naphthenic acids and unsaturated O₃-O₆ compounds. Fatty acids and O₃-O₈ species dominated by saturated alkyl compounds were resistant to ozonation or the primarily incomplete ozonation products. Principal component analysis of identified peaks in the FT-ICR MS spectra provided a comprehensive overview of the complex samples at the molecular level and the results were consistent with the detailed analysis. Taken together, these results showed the high complexity of polar compounds in residual oils after biodegradation or ozonation in contaminated soil and would contribute to a better understanding of bioremediation and ozonation processes.     

Electrospray Ionization Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (ESI FT-ICR MS): Characterization of Complex Environmental Mixtures

Structural and chemical characterization of compounds within complex environmental mixtures provides unique insights into the roles of these compounds in different environmental processes. Here, an emerging technique in environmental chemistry, electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI FT-ICR MS), is described and its applications to the molecular characterization of humic acids and petroleum products are reviewed and examined. ESI is a low-fragmentation ionization technique that preferentially ionizes polar functional groups prior to mass spectrometric analysis. This technique allows the characterization of intact polar macromolecules that are inaccessible to standard chromatographic techniques. ICR MS is an ultrahigh resolution and mass accuracy MS technique based on the detection of ion cyclotron motion within a magnetic field. The combination of ESI FT-ICR MS with other structural techniques such as nuclear magnetic resonance (NMR) allows the unprecedented identification and characterization of polar macromolecules in environmental mixtures and will find numerous applications within environmental chemistry and forensics.     

Electrospray Ionization Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (ESI FT-ICR MS): Characterization of Complex Environmental Mixtures

Structural and chemical characterization of compounds within complex environmental mixtures provides unique insights into the roles of these compounds in different environmental processes. Here, an emerging technique in environmental chemistry, electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI FT-ICR MS), is described and its applications to the molecular characterization of humic acids and petroleum products are reviewed and examined. ESI is a low-fragmentation ionization technique that preferentially ionizes polar functional groups prior to mass spectrometric analysis. This technique allows the characterization of intact polar macromolecules that are inaccessible to standard chromatographic techniques. ICR MS is an ultrahigh resolution and mass accuracy MS technique based on the detection of ion cyclotron motion within a magnetic field. The combination of ESI FT-ICR MS with other structural techniques such as nuclear magnetic resonance (NMR) allows the unprecedented identification and characterization of polar macromolecules in environmental mixtures and will find numerous applications within environmental chemistry and forensics.     

Preliminary screening of perfluorooctane sulfonate (PFOS) and other fluorochemicals in fish, birds and marine mammals from Greenland and the Faroe Islands

Extensive screening analyses of perfluorooctane sulfonate (PFOS) and related perfluorinated compounds in biota samples from all over the world have identified PFOS as a global pollutant and have shown its bioaccumulation into higher trophic levels in the food chain. Perfluorinated compounds have been found in remote areas as the Arctic. In this study a preliminary screening of PFOS and related compounds has been performed in liver samples of fish, birds and marine mammals from Greenland and the Faroe Islands. PFOS was the predominant fluorochemical in the biota analyzed, followed by perfluorooctane sulfonamide (PFOSA). PFOS was found at concentrations above LOQ (10 ng/g wet weight) in 13 out of 16 samples from Greenland and in all samples from the Faroe Islands. The results from Greenland showed a biomagnification of PFOS along the marine food chain (shorthorn sculpin < ringed seal < polar bear). The greatest concentration of PFOS was found in liver of polar bear from east Greenland (mean: 1285 ng/g wet weight, n = 2). The geographical distribution of perfluorinated compounds in Greenland was similar to that of persistent organohalogenated compounds (OHCs), with the highest concentrations in east Greenland, indicating a similar geographical distribution to that of OHCs, with higher concentrations in east Greenland than in west Greenland.     

Relative influence of the dissolved humic material on the solid-phase extraction efficiency of pesticides from environmental water

The effect of organic matter on the solid-phase extraction (SPE) efficiency for pesticides belonging to different chemical groups (urea-derivatives, carbamates and triazines) and having different polarities, was simultaneously studied for the first time in pure and simulated water samples. SPE was carried out in precolumns packed with C18 silica or styrene-divinylbenzene copolymer PLRP-S phases on-line coupled to high performance liquid chromatography (HPLC) analysis. Retention factors in water (k'(W)) were estimated for 25 compounds and used for the calculation of the theoretical breakthrough volume (Vb(T)) in pure water. Experimental breakthrough volumes (Vb(E)) were first determined using purified and deionized water as the matrix for selected compounds having Vb(T) < 500 mL; then, the same water with an added humic acid sodium salt (HA) at 0.4-5.6 mg/L of dissolved organic carbon (DOC) content, was used as the matrix for compounds having VbE < 500 mL in pure water. Several polar pesticides showed negative linear or logarithmic Vb(E) curves depending on HA content; their recoveries were also determined in environmental samples having low dissolved organic carbon values, between 0.5-6.4 mg/L. A similar behavior was observed for these compounds in simulated and natural water samples, where DOC concentration and the percolated volume (Vp) mainly determine the solute recoveries values. However, the variation of recoveries as a function of DOC content could be negative or null depending on the two examined conditions (Vp lower or larger than Vb(E) in pure water). Results demonstrated that breakthrough volume must always be considered to correctly interpret the participation of dissolved humic material on the SPE efficiency of organic micropollutants in water.     

Metabolism of benzo(a)pyrene in rat by oral administration

Orally administered ³H-benzo(a)pyrene (BP) was concentrated in liver, kidney and lung of rat. Liver contained BP-diols, BP-quinones and 3-hydroxy-BP, and extremely high amounts of BP-quinones and unmetabolized BP were found in lung until after 7 hr of administration. In kidney, BP-quinones and BP-diols were major metabolites, but not BP or 3-hydroxy-BP. Low level of metabolites as conjugates with glucuronate and more polar compounds were also detected in kidney. These results suggested that an orally administered BP was metabolized to BP-diols and 3-hydroxy-BP mainly in liver, to BP-quinones mainly in lung, and to BP-diols and glucuronides or more polar compounds mainly in kidney.     

Organic contaminant loads into the Western Mediterranean Sea: estimate of Ebro River inputs

Annual input estimates for several organic contaminants from the Ebro River into the Northwestern Mediterranean Sea were carried out on the basis of monthly sampling from November 2002 to October 2003. Some organochlorine compounds (DDT and its degradation products, DDD and DDE, PCBs (9 congeners), HCB and gamma-HCH) were selected due to their reported occurrence in the river. Furthermore, some polar pesticides used in the Ebro Delta were also determined (atrazine, simazine, diazinon, fenitrothion and molinate). Concentrations ranged from 0.4 to 19.5 ng l(-1) for the organochlorine compounds (sum of particulate and dissolved phases) and from not detected (ND) to 170 ng l(-1) for the more polar pesticides, which were only found in the dissolved phase. The sum of PCB congeners (mean 8.9 ng l(-1)) showed the highest concentrations among the organochlorine compounds and atrazine (mean 82 ng l(-1)) among the polar pesticides. Based on the contaminant concentrations and on hydrological data, contaminant discharges into the sea were estimated amounting in total to 167 and 1,258 kg year(-1) of organochlorine compounds and polar pesticides, respectively. Furthermore, it was observed that PCBs, DDTs and HCB inputs were basically influenced by spate periods due to an increase in suspended particulate matter associated to runoff and sediment resuspension. Whereas for more water soluble contaminants, such as the agrochemicals, their seasonal use had a higher incidence in contaminant fluxes. Bulk chemical parameters such as SPM, DOC, POC, %OC, %ON and C/N ratio provided additional information on the organic matter sources. This provides a better understanding of the temporal variability of the contaminant concentrations.     

Relative influence of the dissolved humic material on the solid-phase extraction efficiency of pesticides from environmental water

The effect of organic matter on the solid-phase extraction (SPE) efficiency for pesticides belonging to different chemical groups (urea-derivatives, carbamates and triazines) and having different polarities, was simultaneously studied for the first time in pure and simulated water samples. SPE was carried out in precolumns packed with C18 silica or styrene-divinylbenzene copolymer PLRP-S phases on-line coupled to high performance liquid chromatography (HPLC) analysis. Retention factors in water (k'_W) were estimated for 25 compounds and used for the calculation of the theoretical breakthrough volume (Vb_T) in pure water. Experimental breakthrough volumes (Vb_E) were first determined using purified and deionized water as the matrix for selected compounds having Vb_T < 500 mL; then, the same water with an added humic acid sodium salt (HA) at 0.4–5.6 mg/L of dissolved organic carbon (DOC) content, was used as the matrix for compounds having VbE < 500 mL in pure water. Several polar pesticides showed negative linear or logarithmic Vb_E curves depending on HA content; their recoveries were also determined in environmental samples having low dissolved organic carbon values, between 0.5–6.4 mg/L. A similar behavior was observed for these compounds in simulated and natural water samples, where DOC concentration and the percolated volume (Vp) mainly determine the solute recoveries values. However, the variation of recoveries as a function of DOC content could be negative or null depending on the two examined conditions (Vp lower or larger than Vb_E in pure water). Results demonstrated that breakthrough volume must always be considered to correctly interpret the participation of dissolved humic material on the SPE efficiency of organic micropollutants in water.     

Calibration of the Chemcatcher passive sampler for monitoring selected polar and semi-polar pesticides in surface water

Passive sampling is a powerful method for continuous pollution monitoring, but calibration experiments are still needed to generate sampling rates in order to estimate water concentrations for polar compounds. We calibrated the Chemcatcher device with an uncovered SDB-XC Empore disk as receiving phase for 12 polar and semi-polar pesticides in aquatic environments in flow-through tank experiments at two water flow velocities (0.135 m/s and 0.4 m/s). In the 14-day period of exposure the uptake of test substances in the sampler remained linear, and all derived sampling rates R(s) were in the range of 0.1 to 0.5 L/day. By additionally monitoring the release of two preloaded polar pesticides from the SDB-XC disks over time, very high variation in release kinetics was found, which calls into question the applicability of performance reference compounds. Our study expands the applicability of the Chemcatcher for monitoring trace concentrations of pesticides with frequent occurrence in water.     

Removal of highly polar micropollutants from wastewater by powdered activated carbon

Due to concerns about ecotoxicological effects of pharmaceuticals and other micropollutants released from wastewater treatment plants, activated carbon adsorption is one of the few processes to effectively reduce the concentrations of micropollutants in wastewater. Although aimed mainly at apolar compounds, polar compounds are also simultaneously removed to a certain extent, which has rarely been studied before. In this study, adsorption isotherm and batch kinetic data were collected with two powdered activated carbons (PACs) to assess the removal of the polar pharmaceuticals 5-fluorouracil (5-Fu) and cytarabine (CytR) from ultrapure water and wastewater treatment plant effluent. At pH?7.8, single-solute adsorption isotherm data for the weak acid 5-Fu and the weak base CytR showed that their adsorption capacities were about 1 order of magnitude lower than those of the less polar endocrine disrupting chemicals bisphenol A (BPA) and 17-α-ethinylestradiol (EE2). To remove 90 % of the adsorbate from a single-solute solution 14, 18, 70, and 87 mg?L^?1 of HOK Super is required for EE2, BPA, CytR, and 5-Fu, respectively. Effects of solution pH, ionic strength, temperature, and effluent organic matter (EfOM) on 5-Fu and CytR adsorption were evaluated for one PAC. Among the studied factors, the presence of EfOM had the highest effect, due to a strong competition on 5-Fu and CytR adsorption. Adsorption isotherm and kinetic data and their modeling with a homogeneous surface diffusion model showed that removal percentage in the presence of EfOM was independent on the initial concentration of the ionizable compounds 5-Fu and CytR. These results are similar to neutral organic compounds in the presence of natural organic matter. Overall, results showed that PAC doses sufficient to remove >90 % of apolar adsorbates were able to remove no more than 50 % of the polar adsorbates 5-Fu and CytR and that the contact time is a critical parameter.     

Concentrations of polychlorinated dibenzo-p-dioxins, dibenzofurans and non-ortho substituted biphenyls in polar bear milk from Svalbard (Norway)

Polychlorinated dibenzo-p-dioxins (PCDD), dibenzofurans (PCDF) and non-ortho substituted biphenyls (PCB, CB) were determined in 6 polar bear milk samples from Svalbard (Norway). For these compounds, no data for polar bears have been reported before from this region. Most of the PCDD/PCDF congeners were found at detectable levels. Concentrations expressed as 2,3,7,8-TCDD equivalents (Nordic model) were in the order of 1–3 pg/g⁻¹ fat (0.2–1.6 pg ml⁻¹ milk) which is comparable with ringed and harp seal blubber from the same region. On whole milk basis, concentrations were similar to those found in human milk. An estimation of the daily uptake via milk showed that the intake is lower for polar bears compared to humans. As in human milk, relatively high levels of OCDD were found in some polar bear milk samples. The PCDD/PCDF congener pattern in the milk was different to that found in polar bear fat from the Canadian Arctic. Non-ortho substituted PCB levels in polar bear milk were similar to those found in polar bear fat from the Canadian North. However, CB 77 or 169 dominated in the milk while CB 126 was the most abundant congener in fat. PCDD/PCDF levels expressed as 2,3,7,8-TE were highly correlated with the fat content of the milk. No correlation between CB and PCDD/PCDF concentrations was found. Some data indicate that PCDD/PCDF concentrations in polar bear milk decrease with increasing time after delivery.     

Characterization of incense smoke by solid phase microextraction—Comprehensive two-dimensional gas chromatography (GC×GC)

Comprehensive two-dimensional gas chromatography in tandem with flame ionization detection (GC×GC-FID) was used for the qualitative fingerprint characterisation of four different types of powdered incense headspace (H/S), and incense smoke. Volatile organic compounds (VOCs) in the incense powder and smoke were extracted by using solid phase microextraction (SPME) with a polydimethylsiloxane/divinylbenzene (PDMS/DVB) 65 μm fiber. Low-polarity/polar, and polar/non-polar phase combinations were tested to contrast the GC×GC separation of components in these two column sets.A total of 324 compounds were tentatively identified, with more than 100 compounds in incense powders and more than 200 compounds in the incense smoke, by using GC coupled to quadrupole mass spectrometric detection. Identification required at least 90% match with the NIST library; otherwise they were considered as unidentified. The smoke stream comprised compounds originating from the incense powder, and combustion products such as PAH, N-heterocyclics, and furans. However, GC×GC was able to separate many more volatile compounds (possibly hundreds more) present in the complex smoke samples, many of which cannot be separated by conventional 1D-GC; this is a direct consequence of the high-resolution power of GC×GC. GC×GC fingerprint comparison of powder H/S with smoke allows facile subtraction of the former from the latter to assist identification of compounds generated from burning incense.     

Toxicity and Mutagenicity of Component Classes of Oils Isolated from Soils at Petroleum- and Creosote-Contaminated Sites

Abstract

Microtox and Ames bioassays were employed to assess acute toxicity and mutagenicity of water soluble components of class–fractionated oils extracted from one creosote–and four petroleum–contaminated soils. Microtox results revealed that potential acute toxicity resides mainly in the polar class fractions at three sites and indicated potential synergistic and antagonistic effects between compounds in the total extracts at two sites. Ames Salmonella/microsome testing indicated that the polyaromatic fractions at two sites exhibit weak mutagenicity with enzymatic activation, while the polar fractions at two sites are weakly mutagenic without enzyme activation. Further chemical characterization of the polar and polyaromatic fractions is required to fully assess the potential of health and ecological risks at the creosote–and petroleum–contaminated sites exhibiting these toxic responses.     

Primary biodegradability of mineral base oils in relation to their chemical and physical characteristics.

The primary biodegradability of 32 mineral base (i.e., unformulated) oils of paraffinic nature was evaluated using the CEC L-33-A-93 test. These oils were refinery products obtained by varying manufacturing processes. Biodegradation percentages ranged between 15% and 75%, i.e., below the commonly accepted standards for environmentally-compatible lubricants. Biodegradability values were compared to the overall chemical composition and main physical properties of base oils. Biodegradability decreased with increasing levels of aromatic and/or polar compounds in the tested oils. For most oils, the biodegradation percentage increased with the viscosity index, but was a decreasing function of the kinematic viscosity (KV), the pour point, the flash point (FP) and the refractive index (RI). Linear relationships between biodegradability and FP or RI values were observed. These results show that, beside chemical features such as the contents in polar and aromatic compounds, simple physical magnitudes such as KV and RI, commonly used to characterize lubricant properties, may be useful parameters for predicting the biodegradability of mineral base oils.     

Ozonation of azo dye Acid Red 14 in a microporous tube-in-tube microchannel reactor: decolorization and mechanism

Despite the great success of time-weighted average passive sampling of hydrophobic contaminants, such as PCBs and PAHs, the sampling of polar organic compounds still presents a challenge because the equilibrium between water and most sampling phases is attained in a relatively short time. In this study, we proposed a new time-integrative sampler using in situ solvent extraction (TISIS) for polar organic chemicals. The sampler was composed of a 15 cm poly(dimethylsiloxane) (PDMS) tubing, with an internal diameter of 0.5 mm and wall thickness of 0.5 mm, through which an extraction solvent (acetonitrile) was passed. Four polar organic contaminants, caffeine, atrazine, diuron and 17α-ethynylestradiol, were chosen for the evaluation of the performance of the sampler. Without the use of in situ solvent extraction, the PDMS tubing when exposed to a constant aqueous concentration of the four model compounds was able to linearly accumulate those compounds for less than 12 h and equilibrium between the PDMS tubing and water was attained in 2 d under our laboratory conditions. However, TISIS when exposed to a constant aqueous concentration was able to linearly accumulate all the model compounds without any exposure time limitation. The measured sampling rates at three different extraction flow rates (0.2, 0.5, 1.5 mL min⁻¹) were similar, regardless of the chemicals, indicating that the overall mass transfer from aqueous solution to the extraction solvent was most likely dominated by partitioning to the PDMS tubing and the internal diffusion within PDMS. In addition, a pulsed exposure experiment confirmed that TISIS operated in a time-integrative mode when the environmental concentration was highly fluctuated.     

Sorption of polar and nonpolar organic contaminants by oil-contaminated soil

Sorption of nonpolar (phenanthrene and butylate) and polar (atrazine and diuron) organic chemicals to oil-contaminated soil was examined to investigate oil effects on sorption of organic chemicals and to derive oil–water distribution coefficients (K_oil). The resulting oil-contaminated soil–water distribution coefficients (K_d) for phenanthrene demonstrated sorption-enhancing effects at both lower and higher oil concentrations (C_oil) but sorption-reducing (competitive) effects at intermediate C_oil (approximately 1 g kg⁻¹). Rationalization of the different dominant effects was attempted in terms of the relative aliphatic carbon content which determines the accessibility of the aromatic cores to phenanthrene. Little or no competitive effect occurred for butylate because its sorption was dominated by partitioning. For atrazine and diuron, the changes in K_d at C_oil above approximately 1 g kg⁻¹ were negligible, indicating that the presently investigated oil has little or no effect on the two tested compounds even though the polarity of the oil is much less than soil organic matter (SOM). Therefore, specific interactions with the active groups (aromatic and polar domains) are dominantly responsible for the sorption of polar sorbates, and thus their sorption is controlled by available sorption sites. This study showed that the oil has the potential to be a dominant sorptive phase for nonpolar pollutants when compared to SOM, but hardly so for polar compounds. The results may aid in a better understanding of the role of the aliphatic and aromatic domains in sorption of nonpolar and polar organic pollutants.     

Marine macroalgae in polar regions as natural sources for volatile organohalogens

Marine macroalgae species from the polar regions were investigated for their importance as natural sources of volatile halogenated compounds released into the biosphere. Several different halogenated C1 to C4 hydrocarbons were identified and their release rates determined. The compounds contained mainly bromine and iodine, and form was the dominant compound released. Although an annual atmospheric input of approximately 10(8)-10(10) g bromine and 10(7)-10(8) g iodine was calculated from the release rates, marine macroalgae are apparently not the major source on a global scale, as the release is up to four orders of magnitude lower than a presumed annual flow from the oceans. Despite this, macroalgae may be more important on a local scale due to their occurrence at a high biomass in the coastal regions. The present paper gives an overview about studies done on the release of volatile halocarbons by macroalgae from polar regions. Furthermore, the function of these compounds in the macroalgal metabolism is discussed.     

Quantitative structure-activity relationships for the inhibition toxicity to root elongation of Cucumis sativus of selected phenols and interspecies correlation with Tetrahymena pyriformis

The comparative toxicities of selected phenols to higher plants Cucumis sativus were measured and the negative logarithm molar concentration of the root elongation median inhibition (IRC50) were derived. Quantitative structure-activity relationships (QSARs) were developed to explore the toxicity influencing factors and for predictive purpose. The toxicity data, fell into two classes: polar narcosis and bio-reactive. For polar narcotic phenols, a highly significant two-parameter QSAR based on 1-octanol/water partition coefficient (logKow) and energy of the lowest unoccupied orbital (E(lumo)) was derived (IRC50 = 0.77 log Kow - 0.39E(lumo) + 2.36 n = 22 r2 = 0.89). The five bio-reactive chemicals proved to show elevated toxicity due to their typical substructure involved diverse reactive mechanisms. In an effort to model all chemicals, a robust multiple-variable QSAR combining logKow, E(lumo) and Qmax, the most negative net atomic charge, was developed (IRC50 = 0.65 logKow - 0.72E(lumo) + 0.23Qmax + 2.81 n = 27 r2 = 0.94), indicating that hydrophobicity, electrophilicity and hydrogen bond interaction contribute mainly to the phytotoxicity. The toxicological data was compared with Tetrahymena pyriformis 2-d population growth inhibition toxicity (IGC50) and excellent interspecies correlations were observed both for the polar narcotics and for five reactive chemicals (for polar narcotics: IRC50 = 0.95IGC50 + 1.07 n = 16 r2 = 0.89; for bio-reactive chemicals: IRC50 = 0.98IGC50 + 2.19 n = 5 r2 = 0.97; and for all: IRC50 = 0.93IGC50 + 1.63 n = 21 r2 = 0.87). This suggested that T pyriformis toxicity could serve as a surrogate of C. sativus toxicity for phenols and interspecies correlation also could be established for reactive chemicals.