Assessment of the environmental impact of landfill sites with open combustion located in arid regions by combined chemical and ecotoxicological studies

Two different waste disposal sites in Jordan were investigated in order to determine the environmental situation in context with waste disposal techniques. One landfill, located at Marka/Amman, had been closed about 25 years ago and covered with soil. Here, the waste had been actively open combusted and openings in the cover, still emitting smoke, indicated that waste was still smoldering inside the landfill's body. The second disposal site close to Ekeeder/Irbid is still operated. On this ground, the solid waste is not intentionally burned, although spontaneous fires frequently come up. Samples of waste, soil, and entrained dust were collected and analyzed. From the solid samples, respectively, their eluates, sum parameters, ecotoxicological effects as well as contents of elements/heavy metals and organic pollutants (PAH, PCDD/F) were determined. In general, the Ekeeder-samples were low-contaminated. The investigation of the Marka-samples showed higher contamination of the site's center, clearly being influenced by combustion processes. A significant contamination of the landfill's vicinity by its emissions could not be derived from the analytical data. Ecotoxicological investigations, applying a bio-test battery, revealed correlations with the sum parameters but not with the trace pollutants. Thus, the Marka-samples with the highest measured values of sum parameters caused adverse effects on three different test species, whereas other samples from Marka and Ekeeder had small or no effects. The results of these investigations depict the influence of different disposal techniques on the contamination situation of a landfill and they shall contribute to assess the conditions of other disposal sites in (semi)arid regions.     

An environmental forensic investigation at a bio-medical waste treatment and disposal facility in Kerala,India

Indian statutes identify twelve different types of biomedical wastes and give the treatment and disposal options for each. Since it is not possible for every generator of biomedical waste to go for their own treatment and disposal facility, the small-scale generators take the service of centralized treatment and disposal facilities available to them on payment. In the state of Kerala in India, where the basic health indicators match those of many developed countries, the centralized biomedical waste treatment facility is run by Indian Medical Association (IMA), Kerala, under the banner IMAGE (IMA Goes Eco-Friendly) at a place called “Kanjikode” in the Palakkad District. The facility receives biomedical waste from around 4500 hospitals across the State and an equal number of medical laboratories. The plant incinerates the incinerable waste and the other kind of waste are disinfected and decontaminated. The residual ash and dried sludge are then moved to the landfill area. Recently, the facility was in the middle of a controversy due to the alleged health hazards it posed to the surrounding population. An environmental forensic investigation was carried out at the site to establish the merits of the allegation. The reported study is a part of the investigation where groundwater was analysed for the presence of heavy metals. As the biomedical waste contain heavy metals like Zn, Pb, Cd, Cr, and Hg, the presence of these were analysed to establish contamination of groundwater by the facility. The study area is bounded by Malampuzha dam and Korayar river. Groundwater contaminant transport modelling was done for a 3430 m × 3960 m area surrounding the waste treatment facility using Visual MODFLOW and MODPATH. Ground water flow direction and particle pathlines were computed to track the movement of contaminants. Groundwater samples were collected from the area shown to be polluted by the model, if metals were discharged by the facility, and also from outside this area. Water samples were collected conforming to the guidelines in the “Pollution Crime Forensic Investigation Manual” published by INTERPOL. The collected water samples were tested for heavy metal concentration using atomic absorption spectroscopy (AAS). The water sample analysis showed that the groundwater is not contaminated by heavy metal discharge from the biomedical treatment facility.     

Public Policy impacts on the Generation and Disposal of Hazardous Waste in New York State

A number of policies adopted by the federal government and the states have been designed to promote waste reduction or influence the choice of waste disposal technologies employed by generators of hazardous waste. Graphic analysis of smoothed time series data for hazardous wastes manifested in New York State for the period between June 1982 and February 1987 suggests that some of these policies have had the intended effects.

Significant shifts in manifested waste volumes are evident that coincide with the following policy interventions: (1) increased state waste-end tax rates; (2) state and federal landfill bans; (3) federal restrictions on burning hazardous wastes and waste oils for energy recovery; and (4) changes in the federal regulatory definition of hazardous waste. Other changes in waste generation and management appear to be attributable to such factors as state and regional economic conditions and changes in instate treatment and disposal facility capacity. Analysis of the management of specific waste types supports evidence from the graphic analysis that waste generators changed from land disposal to “higher” waste handling technologies in response to several policy interventions.     

Public policy impacts on the generation and disposal of hazardous waste in New York State

A number of policies adopted by the federal government and the state have been designed to promote waste reduction or influence the choice of waste disposal technologies employed by generators of hazardous waste. Graphic analysis of smoothed time series data for hazardous wastes manifested in New York State for the period between June 1982 and February 1987 suggests that some of these policies have had the intended effects. Significant shifts in manifested waste volumes are evident that coincide with the following policy interventions: (1) increased state waste-end tax rates; (2) state and federal landfill bans; (3) federal restrictions on burning hazardous wastes and waste oils for energy recovery; and (4) changes in the federal regulatory definition of hazardous waste. Other changes in waste generation and management appear to be attributable to such factors as state and regional economic conditions and changes in instate treatment and disposal facility capacity. Analysis of the management of specific waste types supports evidence from the graphic analysis that waste generators changed from land disposal to "higher" waste handling technologies in response to several policy interventions.     

Solubility analysis and disposal options of combustion residues from plants grown on contaminated mining area

Biomass, as a renewable energy source, is an excellent alternative for the partial replacement of fossil fuels in thermal and electric energy production. A new fuel type as biomass for energy utilisation includes ligneous plants with considerable heavy metal content. The combustion process must be controlled during the firing of significant quantities of contaminated biomass grown on brownfield lands. By implementing these measures, air pollution and further soil contamination caused by the disposal of the solid burning residue, the ash, can be prevented. For the test samples from ligneous plants grown on heavy metal-contaminated fields, an ore mine (already closed for 25 years) was chosen. With our focus on the determination of the heavy metal content, we have examined the composition of the soil, the biomass and the combustion by-products (ash, fly ash). Our results confirm that ash resulting from the combustion must be treated as toxic waste and its deposition must take place on hazardous waste disposal sites. Biomass of these characteristics can be burnt in special combustion facility that was equipped with means for the disposal of solid burning residues as well as air pollutants.     

放射性废物处置库顶盖毛细屏障的研究进展

放射性废物处置库工程屏障的设计对处置库中放射性废物的长期安全具有重要意义.毛细屏障作为处置库顶盖的工程屏障之一,已在国内外得到广泛的应用.阐述了放射性废物处置库顶盖毛细屏障设置的意义,对近年来毛细屏障的一些研究进展进行了分析,提出了一些尚待解决的问题.     

Development of a hazardous air pollutants monitoring program using the Data Quality Objectives process

To effectively reduce the environmental compliance costs associated with meeting hazardous air pollutant emission requirements, the U.S. Environmental Protection Agency's Data Quality Objective (DQO) process has been proposed as a suitable framework for establishing a defensible monitoring program. Through the use of a hazardous materials pilot study, the variability in the composite vapor pressure for regulated handwipe cleaning solvents was established. These results served as inputs to the DQO process, which identified that for facility decision-makers to claim with a 99% confidence level that the facility is in compliance with the National Emission Standards for Hazardous Air Pollutants (NESHAP), a minimum of 12 handwipe cleaning solvent compliance samples (taken at random every 6 months) must have a composite vapor pressure equal to or below the regulatory limit of 45 mmHg at 20 degrees C. Implementation of the DQO-based compliance-sampling plan eliminates the need for an affected facility to sample all regulated handwipe cleaning solvents while still maintaining a reasonably high level of confidence in the compliance status of its regulated sources. The approach described for designing a defensible compliance sampling plan can be extended to other aspects of the aerospace NESHAP rule, including compliance sampling for surface coating, chemical depainting, and hazardous waste disposal.     

The impact of an open waste disposal site on soil and groundwater pollution

A study has been carried out of a waste disposal site, located in the valley of a small creek, 3 km south of Canakkale city centre. The surface area of the site was around 101000 square metres, and the total amount of waste deposited at the site since 1990 was approximately 1001000 tons. The major risks of the dump are its closeness to the university campus area to the south, the airport to the north, and residential areas encroaching towards the dump site. The nuisance caused by odour is high. The waste pile emplaced at the head of the tributary stream has caused channelling of the leachate to the creek, which is eventually washed towards the agricultural fields. The field investigation included surface geological, hydrogeochemical and geochemical studies. Water samples were collected at 11 points. Three observation wells were dug in front of the open waste disposal site. Soil samples from these observation wells were collected at 30, 70 and 150 cm depths, and some heavy metals were analysed. The concentrations of lead, copper and zinc in soil at the depth of 150 cm decreased with distance from the waste disposal site. Hydrogeochemical data analysis gave similar results.     

城市固体废物管理源头政策调控系统动力学模型

把城市居民固体废弃物源头调控政策、居民的废弃物分类行为与固体废弃物处置管理系统看成动态演化的反馈系统.在固体废弃物从量收费政策和法规政策影响下,采用系统动力学模型分析居民参与废弃物管理的行为对整个废弃物管理系统的动态影响.用开发的昆明城市同体废弃物系统动力学模型对3种设定的政策情景进行了仿真.结果表明:要实现同体废弃物处置与管理的可持续发展,必须在源头上通过收费和法规等政策促使居民参加到废弃物管理系统中,注重提高资源化和无害化能力的同时,要加强源头减量和回收的力度,减少废弃物的非法处置.     

Microphysical Effects on Cloud Water Acidity: A Case Study in a Nonprecipitating Cloud Event Observed at Mt. Mitchell,North Carolina

A workshop on solid waste facility siting was sponsored by the University of Tennessee's Waste Management Research and Education Institute on June 11, 1993, in Knoxville, Tennessee. Eighteen experts from around the country gathered at the workshop to engage in frank discussions of the current status of structured approaches to facility siting. Attendees represented federal and state government, academia, consulting firms, and private waste industry. The goals of the workshop were to: (1) identify trends in state approaches to solid waste disposal; (2) describe a few “model“ state frameworks for solid waste facility siting; and (3) assess what sort of local forum can most effectively respond to solid waste siting issues. This synthesis of topics discussed at the workshop reflects the views of the authors and not necessarily the group as a whole.     

Siting a Fully Integrated Waste Management Facility in Alberta

The development of a special (hazardous) waste management system is well under way in Alberta, Canada, and completion of an integrated treatment and disposal facility near Swan Hills is expected in 1988. The facility will handle both inorganic and organic waste streams in a physical/chemical treatment plant and high temperature incinerator. Treated liquid residues will be disposed of in a deep well, and treated solid residues in a secure landfill. The chosen treatment technology and the established hydrogeological conditions of the site ensure the maintenance of environmental quality. An intensive site selection and public participation program provided that only locations which were environmentally and socially suitable for this development were considered. Through awareness of the problems of waste and the solutions for its management, and full citizen involvement in the site selection process, the siting and public participation programs accomplished the difficult task of selecting a location for North America’s first fully integrated special waste treatment and disposal facility.     

The potential of lichens as long-term biomonitors of natural and artificial radionuclides

Lichens were used as biomonitors of Chernobyl fallout 137Cs, of cosmogenic 7Be and of radioactive members of the natural uranium and thorium decay chains. Samples were taken from two locations in France, including lichens sampled at different distances of a coal fired power plant and close to a uranium ore processing waste disposal site. All samples were analyzed gamma-spectrometrically after equilibrium concentrations of short-lived isotopes had been attained. Activity concentrations of the members of the uranium and thorium decay chains in Parmelia sulcata sampled 1994 decrease with distance from the plant, whereas in lichens taken at the waste disposal site a decrease with time was observed. Comparison of 7Be activity concentrations measured in lichens with atmospheric deposition rates confirms that P. sulcata can be used as a quantitative biomonitor of radioactive trace substances. Retention half-lives calculated with a simple one-compartment model are 2.6 +/- 1.2 years for cesium, which was detected in all samples even more than a decade after the Chernobyl accident, and of 0.7 (+/- 0.1) to 3.3 (+/- 0.7) years for lead. Consequences of our results for model identifiability and parameter estimation of a two-compartment model are discussed.     

Modelling reactions between cement pore fluids and rock: implications for porosity change

The migration of groundwater equilibrated with cement from a deep geological disposal facility for radioactive wastes will perturb the chemical, minerological and physical properties of the geosphere in advance of the migration of radionuclides. Preliminary modelling of a simplified scenario has been conducted to assess these changes using appropriate data for mineral dissolution kinetics, the chemical composition of cement pore fluids, and the hydrogeological characteristics of fractured crystalline rock. Chemical exchanges between rock immediately adjacent to the engineered barriers of a waste disposal facility and pore fluids were evaluated using the speciation-reaction path code. which revealed rapid loss of Ca, and gains in Na and Si of the evolved fluids, with little change in pH. Secondary minerals show a sequence of calcium silicate hydrates, and zeolites. Precise definition of the overall mass balance is uncertain due to the absence of both thermodynamic data for many zeolites and kinetic data for the precipitation of feldspars. Modelling has demonstrated that reaction kinetics will be important in governing chemical exchanges for length scales up to 20 m. Radionuclide retardation will be enhanced by the growth of zeolites and calcium silicate hydrates.     

Comprehensive two-dimensional gas chromatography time of flight mass spectrometry (GC×GC-TOFMS) for environmental forensic investigations in developing countries

The disposal and dumping of toxic waste is a matter of growing concern in developing countries, including South Africa. Frequently these countries do not possess access to gas chromatography-high resolution mass spectrometry (GC-HRMS) for the determination of persistent organic pollutants (POPs). This publication describes an alternative approach to the investigation of toxic waste using comprehensive gas chromatography coupled to time of flight mass spectrometry (GC × GC-TOFMS). The technology permits both comprehensive screening of toxic samples for numerous classes of organic pollutants and also quantitative analysis for the individual compounds. This paper describes the use of this technique by analysing samples obtained from a hazardous waste treatment facility in South Africa. After sampling and extraction the samples were analysed for polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and four dioxin-like non-ortho substituted polychlorinated biphenyls (PCBs). The quantitative values, as well as detection limits, obtained using the GC × GC-TOFMS methodology compares well with those obtained using GC-HRMS; the accepted benchmark technology for this analysis. Although GC × GC-TOFMS is not a target compound analytical technique (as is GC-HRMS), it is possible to obtain information on numerous other classes of organic pollutants present in the samples in one analytical run. This is not possible with GC-HRMS. Several different column combinations have been investigated for handling very complex waste samples and suggestions are presented for the most suitable combination.     

Present State,of Industrial Waste Management in Japan

Systematic management for industrial waste in Japan has been carried out based on the Waste Disposal and Public Cleansing Law which was enacted in 1970. The law and its ordinances designate 19 kinds of waste materials discharged from business activities as industrial waste and prescribe the generator's responsibility, requirements for treatment contractors, standards for consignment, specific personnel, etc. from the view of proper management. And they also, prescribe disposal standards, structure, and maintenance standards for treatment facilities, including final disposal sites, from the view of proper treatment and disposal. The Standard for Verification provides criteria to categorize as hazardous or nonhazardous industrial waste which is subjected to treatment and disposal in conformity with each standard. The fundamental policies to cope with industrial waste focus on reduction of generation, promotion of recycling, establishment of a comprehensive information management system and participation of the public which can contribute well to prevent environmental pollution caused by inappropriate management of industrial waste.     

Chemical Manufacturers Association 1984 Hazardous Waste Survey

This paper discusses the Chemical Manufacturers Association's 1984 survey of the chemical industry's hazardous waste management practices. The survey data include a breakdown of how the industry's hazardous wastes are managed, detailing generation, treatment and disposal, and cover 725 plants in 81 companies. The 1984 survey is the third CM A hazardous waste survey, and the paper discusses resultant waste treatment trends from 1981- 1984, the period covered by previous surveys. A total of 278.5 million tons of hazardous waste was treated and disposed by survey respondents. Of this, 276.8 million tons was hazardous wastewater and 1.7 million tons was solid hazardous waste. The survey solid hazardous waste total was projected to the entire industry (Standard Industrial Code 2800) and is estimated at 6.9 million tons. The survey showed continued decreasing trends in hazardous waste generation in the chemical industry. It demonstrated changes in hazardous waste management practices, with decreased use of landfills and increased incineration of the solid wastes that are generated.     

Evaluating landfill disposal of chromated copper arsenate (CCA) treated wood and potential effects on groundwater: evidence from Florida

Chromated copper arsenate (CCA) treated wood has been used for more than 50 years. Recent attention has been focused on appropriate disposal of CCA-treated wood when its service life ends. Groups in the US and Europe concerned with the possibility of arsenic migration to groundwater from disposed CCA-treated wood have proposed that consumers be required to dispose of the wood as a hazardous waste, in the most protective of landfills. We examined available data for evidence of arsenic migration from unlined construction and demolition (C&D) debris landfills in Florida, where CCA-treated wood is disposed. Florida was chosen because soil, groundwater, landfill design, weather, and levels of CCA-treated wood use make the state a uniquely sensitive indicator for observing arsenic migration from CCA-treated wood disposal sites, should it occur. We developed and quality-checked a CCA-treated wood disposal model to estimate the amount of wood and associated arsenic disposed. By 2000, an estimated 13 million kg of arsenic in CCA-treated wood was disposed in Florida; however, groundwater monitoring data do not indicate that arsenic is migrating from unlined C&D landfills. Our results provide evidence that highly stringent regulation of CCA-treated wood disposal, such as treatment as a hazardous waste, is unnecessary.     

Benthic population studies of a North Sea disposal area used for industrial liquid waste

The disposal of industrial waste at sea is a subject which, justifiably, arouses a great deal of public interest. This paper presents the data from one aspect of a continuing, multi-disciplinary, programme which monitors the disposal of acid waste to a liquid waste disposal area. The benthic infaunal populations of both the disposal and a control area have been studied over a five-year period. The resulting data are analysed, using multi-variate techniques, and it is concluded that there is no evidence that disposal operations have altered the diversity or abundance of the benthic fauna. The distribution of the different faunal groupings within the areas appears to be related to sediment type.     

Life Cycle Approach to Effective Waste Minimization

In the Hazardous and Solid Waste Amendments of1984, Congress declared the objective of the national waste policy to be "to promote the protection of health and the environment and to conserve valuable material and energy resources." Further, Congress stated that this would be done by minimizing the generation and land disposal of hazardous waste by encouraging process substitutions, materials recovery, proper recycling and reuse, and treatment.

This paper presents the approach used by 3M to find innovative ways to minimize the amount of hazardous waste which ultimately must be disposed by landfilling. The life cycle of waste is examined, looking at how it can be reduced or eliminated starting with the point of generation in the manufacturing operation, to its processing, treatment or ultimate disposal as a residual hazardous waste. Case histories are used as examples of how waste can be minimized in each stage of the life cycle, with emphasis on innovative alternatives that have arisen out of the 3Mprogram.     

Hazardous Waste Minimization: Part V Waste Minimization in the Petroleum Industry

The extractive nature of the petroleum industry sets it apart from other industries in many respects. The nature of this industry places it at somewhat of a disadvantage to other industries when attempts are made to foster waste minimization practices and programs. However, this is no excuse for the industry to not further vigorously pursue minimizing waste. This paper describes the petroleum industry and the products it makes along with their associated waste streams. The industry’s commitment to waste minimization is described with examples of specific minimization projects provided. Although the opportunities for minimization are limited, the economic incentives for reducing waste disposal costs, not to mention long term liability from improper disposal practices, has put the petroleum industry on the road to waste minimization.