The impact of atrazine on lake periphyton communities, including carbon uptake dynamics using track autoradiography

Chlorophyll a, freshweight biomass, ash-free dry weight, cell numbers, species richness, community carbon uptake and species-specific carbon uptake were used to monitor the impact of atrazine (2 chloro-4-ethylamino-6-isopropylamino-s-triazine) on an in situ, enclosed periphyton community. Atrazine concentrations ranging from 0.08 to 1.56 mg litre(-1) were used during the 2 years of study. In both 1982 and 1983, there was a shift from a chlorophyte- to a diatom-dominated community. In 1982 the cyanobacterium Cylindrospermum stagnale and the chlorophyte Tetraspora cylindrica developed isolated colonies in the 1.56 mg litre(-1) treatment, indicating resistance to atrazine at this concentration. After atrazine exposure, community productivity was reduced by 21% to 82% in the low to high exposures, respectively. After day 21 productivity returned to control levels. It was shown, using track autoradiography, that the productivities of the larger algae Mougeotia sp., Oedogonium sp., Tolypothrix limbata and Epithemia turgida were the most affected, with reductions of 74.3% to 93.1% that of the controls. All the biotic measures indicated reduced growth after herbicide exposure.     

Effects of the triazine herbicide, simetryn, on freshwater plankton communities in experimental ponds

The effects of a triazine herbicide, simetryn, on freshwater phyto- and zooplankton communities and water chemistry were investigated using outdoor experimental ponds. Simetryn was applied at a concentration of 0.1 or 1.0 mg l(-1) 18 days after the start of the experiment. Simetryn treatments reduced pH, dissolved oxygen concentration, chlorophyll a concentration and photosynthetic rate in the pond water, whereas they increased the dissolved nutrient concentration. In the phytoplankton community Volvocales and Cryptophyceae were clearly reduced by the herbicide application. In the 0.1 mg l(-1) simetryn-treated ponds, photosynthetic rate of the phytoplankton community recovered slightly about two weeks after the treatment, which coincided with recovery of centric diatoms and Cryptophyceae, whereas it was completely suppressed until the end of the experiment in the 1.0 mg l(-1) simetryn-treated ponds. The decrease in zooplankton density in the treated ponds was not due to the direct toxic effects of simetryn but to indirect effects resulting from reduced algal productivity which in turn reduced the food supply.     

Pollution-induced community tolerance (PICT) and seasonal variations in the sensitivity of phytoplankton to atrazine in nanocosms.

Algae communities exposed to a herbicide like atrazine (PS II inhibitor) are expected to be selected and to be more tolerant to the herbicide than unexposed communities (pollution-induced community tolerance, PICT). The PICT may be an ecotoxicological tool for detecting this selective action of chronic pollution, and this method has been applied to several toxicants in experimental systems and in field studies. But the detection of PICT with PS II inhibitors has sometimes been variable. This work was done to study the long-term effects of exposure to atrazine (10 microg/l) and the PICT responses of phytoplankton communities in repeated outdoor nanocosms. Phytoplankton communities were sampled in Lake Geneva at different periods of the year and the effects of atrazine were analysed by studying community structure, biomass and primary production, and by measuring tolerance to atrazine in a short-term physiological test based on 14C incorporation. We find that PICT is a sensitive method for measuring effects. Even atrazine concentrations causing little restructuring induced tolerance in most of our experiments. But the short- and long-term responses of phytoplankton to atrazine varied between experiments, probably due to the initial compositions of the communities and environmental factors associated with seasonal parameters. The selection and detection steps of PICT to atrazine thus vary greatly with environmental conditions and the physiological adaptations of algae to the herbicide. To monitor risk assessment in aquatic systems, PICT studies applied to algae, must be investigated in the light of seasonal contaminations and seasonal events and successions.     

Atrazine distribution measured in soil and leachate following infiltration conditions

Atrazine transport through packed 10 cm soil columns representative of the 0-10 cm soil horizon was observed by measuring the atrazine recovery in the total leachate volume, and upper and lower soil layers following infiltration of 7.5 cm water using a mechanical vacuum extractor (MVE). Measured recoveries were analyzed to understand the influence of infiltration rate and delay time on atrazine transport and distribution in the column. Four time periods (0.28, 0.8, 1.8, and 5.5 h) representing very high to moderate infiltration rates (26.8, 9.4, 4.2, and 1.4 cm/h) were used. Replicate soil columns were tested immediately and following a 2-d delay after atrazine application. Results indicate atrazine recovery in leachate was independent of infiltration rate, but significantly lower for infiltration following a 2-d delay. Atrazine distribution in the 0-1 and 9-10 cm soil layers was affected by both infiltration rate and delay. These results are in contrast with previous field and laboratory studies that suggest that atrazine recovery in the leachate increases with increasing infiltration rate. It appears that the difference in atrazine recovery measured using the MVE and other leaching experiments using intact soil cores from this field site and the rain simulation equipment probably illustrates the effect of infiltrating water interacting with the atrazine present on the soil surface. This work suggests that atrazine mobilization from the soil surface is also dependent on interactions of the infiltrating water with the soil surface, in addition to the rate of infiltration through the surface soil.     

Residual tembotrione and atrazine in carrot

Carrot (Daucus carota L.) is a vegetable crop that is grown throughout the year across various regions of Brazil in rotation or in succession to other cultures. Herbicide residual effect has emerged as a concern, because of the possibility of carryover. Thus, the objective of this study was to evaluate the effect of tembotrione and atrazine residues – in mixture and isolated – on carrot planted in succession to corn. The experiment was designed in randomized blocks with five replications. Treatments consisted of tembotrione (50.4 g ha^?1), tembotrione (100.8 g ha^?1), tembotrione + atrazine (50.4 g ha^?1+ 2 L ha^?1), tembotrione + atrazine (100.8 g ha^?1+ 2 L ha^?1), and atrazine (2.00 L ha^?1) applied eight months before carrot seeding, plus a control treatment with no herbicide application. Investigated variables were shoot dry mass, productivity, and classification of carrot roots. The presence of atrazine and tembotrione decreased dry mass in the area, and only tembotrione reduced total root productivity. Thus, there is a carryover effect to tembotrione application that reduces the dry matter accumulation of shoot and total productivity, and an atrazine + tembotrione (100.8 g ha^?1) mixture reduces the total productivity after application of these herbicides to soil.     

Impact of long-term wastewater irrigation on sorption and transport of atrazine in Mexican agricultural soils

In the Mezquital Valley, Mexico, crops have been irrigated with untreated municipal wastewater for more than a century. Atrazine has been applied to maize and alfalfa grown in the area for weed control for 15 years. Our objectives were to analyse (i) how wastewater irrigation affects the filtering of atrazine, and (ii) if the length of irrigation has a significant impact. We compared atrazine sorption to Phaeozems that have been irrigated with raw wastewater for 35 (P35) and 85 (P85) years with sorption to a non-irrigated (P0) Phaeozem soil under rainfed agriculture. The use of bromide as an inert water tracer in column experiments and the subsequent analysis of the tracers' breakthrough curves allowed the calibration of the hydrodynamic parameters of a two-site non equilibrium convection-dispersion model. The quality of the irrigation water significantly altered the soils' hydrodynamic properties (hydraulic conductivity, dispersivity and the size of pores that are hydraulically active). The impacts on soil chemical properties (total organic carbon content and pH) were not significant, while the sodium adsorption ratio was significantly increased. Sorption and desorption isotherms, determined in batch and column experiments, showed enhanced atrazine sorption and reduced and slower desorption in wastewater-irrigated soils. These effects increased with the length of irrigation. The intensified sorption-desorption hysteresis in wastewater-irrigated soils indicated that the soil organic matter developed in these soils had fewer high-energy, easily accessible sorption sites available, leading to lower and slower atrazine desorption rates. This study leads to the conclusion that wastewater irrigation decreases atrazine mobility in the Mezquital valley Phaeozems by decreasing the hydraulic conductivity and increasing the soil's sorption capacity.     

Impact of long-term wastewater irrigation on sorption and transport of atrazine in Mexican agricultural soils

In the Mezquital Valley, Mexico, crops have been irrigated with untreated municipal wastewater for more than a century. Atrazine has been applied to maize and alfalfa grown in the area for weed control for 15 years. Our objectives were to analyse (i) how wastewater irrigation affects the filtering of atrazine, and (ii) if the length of irrigation has a significant impact. We compared atrazine sorption to Phaeozems that have been irrigated with raw wastewater for 35 (P35) and 85 (P85) years with sorption to a non-irrigated (P0) Phaeozem soil under rainfed agriculture. The use of bromide as an inert water tracer in column experiments and the subsequent analysis of the tracers’ breakthrough curves allowed the calibration of the hydrodynamic parameters of a two-site non equilibrium convection-dispersion model. The quality of the irrigation water significantly altered the soils’ hydrodynamic properties (hydraulic conductivity, dispersivity and the size of pores that are hydraulically active). The impacts on soil chemical properties (total organic carbon content and pH) were not significant, while the sodium adsorption ratio was significantly increased. Sorption and desorption isotherms, determined in batch and column experiments, showed enhanced atrazine sorption and reduced and slower desorption in wastewater-irrigated soils. These effects increased with the length of irrigation. The intensified sorption-desorption hysteresis in wastewater-irrigated soils indicated that the soil organic matter developed in these soils had fewer high-energy, easily accessible sorption sites available, leading to lower and slower atrazine desorption rates. This study leads to the conclusion that wastewater irrigation decreases atrazine mobility in the Mezquital valley Phaeozems by decreasing the hydraulic conductivity and increasing the soil's sorption capacity.     

Water quality parameters controlling the photodegradation of two herbicides in surface waters of the Columbia Basin,Washington

The water quality parameters nitrate-nitrogen, dissolved organic carbon, and suspended solids were correlated with photodegradation rates of the herbicides atrazine and 2,4-D in samples collected from four sites in the Columbia River Basin, Washington, USA. Surface water samples were collected in May, July, and October 2010 and analyzed for the water quality parameters. Photolysis rates for the two herbicides in the surface water samples were then evaluated under a xenon arc lamp. Photolysis rates of atrazine and 2,4-D were similar with rate constants averaging 0.025 h⁻¹ for atrazine and 0.039 h⁻¹ for 2,4-D. Based on multiple regression analysis, nitrate-nitrogen was the primary predictor of photolysis for both atrazine and 2,4-D, with dissolved organic carbon also a predictor for some sites. However, at sites where suspended solids concentrations were elevated, photolysis rates of the two herbicides were controlled by the suspended solids concentration. The results of this research provide a basis for evaluating and predicting herbicide photolysis rates in shallow surface waters.     

Impact of atrazine-bearing agricultural tile drainage discharge on planktonic drift of a natural stream

Preliminary results are reported from a co-operative study between Agriculture Canada and Environment Canada on environmental impacts of atrazine measured in a field stream receiving agricultural drainage. Systematically, tile drained plots of known crop rotation, area, flow and pesticides use were used in the study. A maximum tile drainage concentration of 13.9 microg liter(-1) atrazine was measured while the maximum measured stream concentration was 1.89 microg liter(-1). Phytoplankton and zooplankton samples were collected on a bi-monthly basis during the growing season. The study indicated possible negative impacts of low concentrations of atrazine on planktonic drift populations, when natural stream flow was reduced, resulting in a lower dilution capacity. A 20 m section of the stream was affected by the tile drainage waters as measured by the resident biological community. Both atrazine and ambient environmental conditions were felt to be contributing to the measured results. No negative impacts on planktonic drift populations were evident beyond 50 m downstream of the tile drainage and stream confluence.     

Atrazine removal in agricultural infiltrate by bioaugmented polyvinyl alcohol immobilized and free Agrobacterium radiobacter J14a: a sand column study

Bench-scale sand column breakthrough experiments were conducted to examine atrazine removal in agricultural infiltrate by Agrobacterium radiobacter J14a (J14a) immobilized in phosphorylated-polyvinyl alcohol compared to free J14a cells. The effects of cell loading and infiltration rate on atrazine degradation and the loss of J14a were investigated. Four sets of experiments, (i) tracers, (ii) immobilized dead cells, (iii) immobilized cells, and (iv) free cells, were performed. The atrazine biodegradation at the cell loadings of 300, 600, and 900 mg dry cells L(-1) and the infiltration rates of 1, 3, and 6 cm d(-1) were tested for 5 column pore volumes (PV). The atrazine breakthrough results indicated that the immobilized dead cells significantly retarded atrazine transport. The atrazine removal efficiencies at the infiltration rates of 1, 3, and 6 cm d(-1) were 100%, 80-97%, and 50-70%, respectively. Atrazine degradation capacity for the immobilized cells was not significantly different from the free cells. Both infiltration rate and cell loading significantly affected atrazine removal for both cell systems. The bacterial loss from the immobilized cell system was 10-100 times less than that from the free cell system. For long-term tests at 50 PV, the immobilized cell system provided consistent atrazine removal efficiency while the atrazine removal by the free cells declined gradually because of the cell loss.     

Photolysis of atrazine and ametryne herbicides in Barbados sugar cane plantation soils and water

The photodegradation kinetics of atrazine (2-chloro-6-(ethylamino)-4-isopropylamino-1,3,5-triazine) and ametryne (2-methylthio-4-ethylamino-6-isopropylamino-s-triazine), in fresh and coastal salt water from Barbados, were measured under irradiation with artificial solar and UV254-radiation. The first-order rate constants were greater for ametryne than for atrazine, and the rates were reduced in seawater relative to fresh water, and in soil slurries relative to fresh water. However, rates were accelerated in the presence of iron(III) at pH 3 due to photo-Fenton type processes. This rate enhancement was reduced at ambient pH values (pH 7-7.5) representative of surface water in Barbados. These results have important implications for the relative persistence of these contaminants in aquatic environments in tropical areas.     

Synthesis, properties and application research of atrazine Fe3O4@SiO2 magnetic molecularly imprinted polymer

Introduction

Magnetic Fe₃O₄ nanoparticles were prepared by coprecipitation and then were coated with SiO₂ on the surface.

Materials and methods

Fe₃O₄@SiO₂ composite microspheres were modified by KH570. Using molecular imprinting technology, atrazine magnetic molecularly imprinted polymer was prepared by using atrazine as template molecule, methacrylic acid as functional monomer and ethylene glycol dimethacrylate as cross-linkers. The morphology, composition and magnetic properties of magnetic nanoparticles were characterized. The recognition selectivity of polymer was studied for template molecule and simulation by UV spectrophotometry. The adsorption properties and selectivity ability were analyzed by Scatchard analysis.

Results

Scatchard linear regression analysis indicated that there are two binding sites of the target molecules. The magnetic molecularly imprinted polymer has been applied to the analysis of atrazine in real samples.

Conclusion

The results show that: the recovery rates and the relative standard deviation were 94.0??98.7% and 2.1??4.0% in corn, the recovery rates and the relative standard deviation were 88.7??93.5% and 2.8??7.2% in water.     

Using polymer mats to biodegrade atrazine in groundwater: laboratory column experiments

Large-scale column experiments were undertaken to evaluate the potential of in situ polymer mats to deliver oxygen into groundwater to induce biodegradation of the pesticides atrazine, terbutryn and fenamiphos contaminating groundwater in Perth, Western Australia. The polymer mats, composed of woven silicone (dimethylsiloxane) tubes and purged with air, were installed in 2-m-long flow-through soil columns. The polymer mats proved efficient in delivering dissolved oxygen to anaerobic groundwater. Dissolved oxygen concentrations increased from <0.2 mg l(-1) to approximately 4 mg l(-1). Degradation rates of atrazine in oxygenated groundwater were relatively high with a zero-order rate of 240-380 microg l(-1) or a first-order half-life of 0.35 days. Amendment with an additional carbon source showed no significant improvement in biodegradation rates, suggesting that organic carbon was not limiting biodegradation. Atrazine degradation rates estimated in the column experiments were similar to rates determined in laboratory culture experiments, using pure cultures of atrazine-mineralising bacteria. No significant degradation of terbutryn or fenamiphos was observed under the experimental conditions within the time frames of the study. Results from these experiments indicate that remediation of atrazine in a contaminated aquifer may be achievable by delivery of oxygen using an in situ polymer mat system.     

Continuous time random walk model better describes the tailing of atrazine transport in soil

Contaminant transport in soils is complicated and involves some physical and chemical nonequilibrium processes. In this research, the soil column displacement experiments of Cl⁻ and atrazine under different flow velocities were carried out. The data sets of Cl⁻ transport in sandy loam fitted to the convection dispersion equation (CDE) and the two-region model (TRM) indicated that the effects of physical nonequilibrium process produced by immobile water on the breakthrough curves (BTCs) of Cl⁻ and atrazine transport through the repacking soil columns were negligible. The two-site model (TSM) and the continuous time random walk (CTRW) were also used to fit atrazine transport behavior at the flow rate of 19.86 cm h⁻¹. The CTRW convincingly captured the full evolution of atrazine BTC in the soil column, especially for the part of long tailing. However, the TSM failed to characterize the tailing of atrazine BTC in the soil column. The calculated fraction of equilibrium sorption sites, F, ranging from 0.78 to 0.80 for all flow rates suggested the contribution of nonequilibrium sorption sites to the asymmetry of atrazine BTCs. Furthermore, the data sets for the flow rates of 6.68 cm h⁻¹ and 32.81 cm h⁻¹ were predicted by the TSM and the CTRW. As to the flow rate of 6.68 cm h⁻¹, the CTRW predicted the entire BTC of atrazine transport better than the TSM did. For the flow rate of 32.81 cm h⁻¹, the CTRW characterized the late part of the tail better, while the TSM failed to predict the tailings of atrazine BTC.     

The effects of elevated metals on benthic community metabolism in a Rocky Mountain stream

The effects of elevated metals (dissolved Zn, Mn and/or Fe) in a Rocky Mountain stream were assessed using measures of primary productivity, community respiration and water-column toxicity. Primary productivity was measured as rates of O2 evolution from natural substrates incubated in situ in closed chambers. Oxygen depletion within these chambers, when incubated in the dark, provided estimates of periphyton community respiration. Sediment community respiration on fine-grained sediments, collected and composited along each stream study reach, was measured on-site by incubating these sediments in closed chambers and measuring O2 depletion. Toxicity was measured as percent mortality of Ceriodaphnia dubia during 48 h acute tests. Gross (GPP) and net primary productivity (NPP) decreased significantly with increasing metal concentrations, from 10.88 +/- 1.46 g O2 m(-2) day(-1) to 0.83 +/- 0.20 g O2 m(-2) day(-1) and 9.85 +/- 1.43 g O2 m(-2) day(-1) to 0.81 +/- 0.20 g O2 m(-2) day(-1), respectively for the reference and most impacted site. Community respiration (CR) declined from 0.65 +/- 0.08 g O2 m(-2) day(-1) to 0.02 +/- 0.01 g O2 m(-2) day(-1) with increasing metal concentrations. Sediment community respiration (SCR) decreased from 0.26 +/- 0.02 g O2 m(-2) day(-1) to 0.01 +/- 0.01 g O2 m(-2) day(-1) at these same sites. Ceriodaphnia dubia mortality increased from 0% at the reference site to 95 +/- 5% at the most impacted sites. Net daily metabolism, quantum yield and assimilation ratio all decreased with increasing metal concentrations, suggesting that both autotrophic and heterotrophic components of the periphyton community were impaired. Overall, functional measures were able to discern sites receiving greater metal impacts from less-impacted sites, with combinations of dissolved metals explaining between 25 and 92% of the variance in the regression models. Using these regression models we were able to calculate lethal and inhibition concentrations of dissolved Zn in the Eagle River. The lethal concentration (LC50) of Zn for Ceriodaphnia dubia is 123 mg liter(-1). The concentrations of Zn which inhibited respiration (IC50) were 177 mg liter(-1) for CR and 199 mg liter(-1) for SCR. These results indicate functional measures may be as sensitive to metal concentrations as acute toxicity tests.     

Molecularly imprinted polymer for analysis of trace atrazine herbicide in water

A molecularly imprinted polymer (MIP) for atrazine was synthesized by non-covalent method. The binding capacity of MIP was 1.00 mg g^{? 1} polymer. The selectivity and recovery were investigated with various pesticides which are mostly, found in the environment, for both similar and different chemical structure of atrazine. The competitive recognition between atrazine and structurally similar compounds was evaluated and it was found that the system provided highest recovery and selectivity for atrazine while low recovery and selectivity were obtained for the other compounds. The highest recovery was obtained from MIP compared with non-imprinted polymer (NIP), a commercial C₁₈ and a granular activated carbon (GAC) sorbent. The method provided high recoveries ranged from 94 to 99% at two spiked levels with relative standard deviations less than 2%. The lower detection limit of the method was 80 ng L^{? 1}. This method was successfully applied for analysis of environmental water samples.     

Atrazine effects on in vitro maturation and in vitro fertilization in the bovine oocyte

The effect of low levels of atrazine (2-chloro-4-ethylamino-6-isopropylamino-s-triazine) on in vitro oocyte maturation, in vitro capacitation of sperm, or in vitro fertilization of bovine oocytes and on the quality of blastocyst formation was studied. Bovine oocytes collected from abattoir ovaries were matured, fertilized, and developed to the blastocyst stage in vitro. Embryos that reached a morula or blastocyst stage were stained with Hoechst 33258 stain to determine the number of blastomeres per embryo. Three bulls whose fertilization rates were proven consistent among straws were used for this study. Atrazine was tested at concentrations of 0.01, 0.1, 1, and 10 microM in either the maturation medium, sperm capacitation medium, or the fertilization medium. Because atrazine was dissolved in ethanol, an ethanol control was used to determine any possible effects of ethanol on the in vitro process. The addition of atrazine to both the maturation and fertilization media did not result in any significant difference in fertilization rates between the controls and the treatments. In the capacitation medium, a significant difference between the controls and the atrazine levels of 0.1, 1, and 10 microM was noted for one bull. Atrazine did not affect the number of blastomeres per embryo. There was not a significant difference (p>0.05) in the number of blastomeres per embryo between the controls and the different levels of atrazine in each medium. This study indicates that low levels of atrazine do not have an effect on in vitro fertilization rates or the number of blastomeres per embryo produced in vitro.     

Mineralization and degradation of glyphosate and atrazine applied in combination in a Brazilian Oxisol

The aim of this study was to investigate the behavior of the association between atrazine and glyphosate in the soil through mineralization and degradation tests. Soil treatments consisted of the combination of a field dose of glyphosate (2.88 kg ha?1) with 0, ?, 1 and 2 times a field dose of atrazine (3.00 kg ha?1) and a field dose of atrazine with 0, ?, 1 and 2 times a field dose of glyphosate. The herbicide mineralization rates were measured after 0, 3, 7, 14, 21, 28, 35, 42, 49, 56 and 63 days of soil application, and degradation rates after 0, 7, 28 and 63 days. Although glyphosate mineralization rate was higher in the presence of 1 (one) dose of atrazine when compared with glyphosate alone, no significant differences were found when half or twice the atrazine dose was applied, meaning that differences in glyphosate mineralization rates cannot be attributed to the presence of atrazine. On the other hand, the influence of glyphosate on atrazine mineralization was evident, since increasing doses of glyphosate increased the atrazine mineralization rate and the lowest dose of glyphosate accelerated atrazine degradation.     

Impact of clouds and aerosols on ozone production in Southeast Texas

A radiative transfer model and photochemical box model are used to examine the effects of clouds and aerosols on actinic flux and photolysis rates, and the impacts of changes in photolysis rates on ozone production and destruction rates in a polluted urban environment like Houston, Texas. During the TexAQS-II Radical and Aerosol Measurement Project the combined cloud and aerosol effects reduced j(NO₂) photolysis frequencies by nominally 17%, while aerosols reduced j(NO₂) by 3% on six clear sky days. Reductions in actinic flux due to attenuation by clouds and aerosols correspond to reduced net ozone formation rates with a nearly one-to-one relationship. The overall reduction in the net ozone production rate due to reductions in photolysis rates by clouds and aerosols was approximately 8 ppbv h^?1.     

Modelling of atrazine transport in the presence of surfactants

Laboratory experiments were conducted to examine the effect of detergents on transport of atrazine [2-chloro-4-(ethylamino)-6-(isopropylamino)-s-triazine] through loam and sandy loam soils under saturation conditions. The Convection Dispersion Equation (CDE) was used to model and quantify the effects of detergents on atrazine model parameters: the retardation factor (R), pore velocity (v) and dispersion coefficient (D). The transport parameters were estimated using moment technique and partition coefficient obtained from batch experiments and compared with best-fitted parameters, R and D, keeping pore velocity constant. Results indicated the CDE model was not successful in predicting atrazine transport in the presence of surfactants at high concentrations. In the case of anionic surfactant with Elora loam, the average predicted R and D from moment technique of 3.4 and 11.1 cm2/h, respectively were significantly different than fitted parameters (R = 39 and D = 227 cm2/h). The poor performance of CDE in the presence of surfactants results from physiochemical changes in herbicide solubility and retention to the soil matrix rather than changes in soil hydraulic properties since the predicted pore water velocities from moment technique were similar to those measured during leaching experiments. Nevertheless, BTC analysis with CDE showed that land application of anionic surfactant (sulphonic) significantly increased R and D and decrease v for both soils. Addition of sulphonic increased R of atrazine by 12 and 26 folds for loam and sandy loam soils, respectively. On the other hand non-ionic surfactants seemed to decrease R, especially in sandy loam soil, thus facilitating atrazine leaching through soil. Non-equilibrium conditions seemed to govern atrazine transport in the presence of surfactants; double peaks in breakthrough curves were observed, indicating a need for mathematical models to account for such phenomena. Atrazine dispersion and tailing seemed to be higher through Elora loam compared to Caledon sandy loam due to higher aggregation of the Elora soil.