Plant growth and uptake of mineral elements at an oily sludge landfarming site in Kuwait

Oily sludge landfarmed in Kuwait soil contains higher concentrations of certain elements than that of the untreated of, soil, e.g. S, Cu, Cr, Zn, Pb, Ni, Mo and V. The growth and elemental content of three different plants grown on a sandy soil previously treated with different concentrations of oily sludge were studied. Tested plants differed in their response to landfarmed oily sludge; ryegrass was the least affected followed by oats, then barley. Uptake of elements differed both qualitatively and quantitatively between test plants. In barley, Zn increased in plants cultivated in soil treated with oily sludge, whereas other metal concentrations were reduced or not affected, namely, Cu, Pb, Ni, V. The uptake of P was greater in plants grown on treated soil compared with those on untreated soil, whereas Na, Ca, K, were either reduced or unaffected. In oats, Zn, Ni, Cu, Pb, V, were not significantly changed. Uptakes of K, Ca, P, and Na in plants from treated soil were higher than that of the control. In ryegrass, heavy metal concentrations were either reduced or remained the same as that of the control. In all cases, concentrations of essential heavy metals and other true elements under investigation were still lower than the levels considered to be sufficient for micronutrients. Thus, the oily sludge was a source of certain micro-nutrients which were deficient in the sandy soil. Further, it appears that uptake and distribution of elements in plant tissues were both highly variable according to the plant, species, and the soil characteristics.     

The influence of biochar and black carbon on reduction and bioavailability of chromate in soils

The widespread use of chromium (Cr) has a deleterious impact on the environment. A number of pathways, both biotic and abiotic in character, determine the fate and speciation of Cr in soils. Chromium exists in two predominant species in the environment: trivalent [(Cr(III)] and hexavalent [Cr(VI)]. Of these two forms, Cr(III) is nontoxic and is strongly bound to soil particles, whereas Cr(VI) is more toxic and soluble and readily leaches into groundwater. The toxicity of Cr(VI) can be mitigated by reducing it to Cr(III) species. The objective of this study was to examine the effect of organic carbon sources on the reduction, microbial respiration, and phytoavailability of Cr(VI) in soils. Organic carbon sources, such as black carbon (BC) and biochar, were tested for their potential in reducing Cr(VI) in acidic and alkaline contaminated soils. An alkaline soil was selected to monitor the phytotoxicity of Cr(VI) in sunflower plant. Our results showed that using BC resulted in greater reduction of Cr(VI) in soils compared with biochar. This is attributed to the differences in dissolved organic carbon and functional groups that provide electrons for the reduction of Cr(VI). When increasing levels of Cr were added to soils, both microbial respiration and plant growth decreased. The application of BC was more effective than biochar in increasing the microbial population and in mitigating the phytotoxicity of Cr(VI). The net benefit of BC emerged as an increase in plant biomass and a decrease in Cr concentration in plant tissue. Consequently, it was concluded that BC is a potential reducing amendment in mitigating Cr(VI) toxicity in soil and plants.     

Growth of alfalfa in sludge-amended soils and inoculated with rhizobia produced in sludge

The efficiency of rhizobial inoculants produced in wastewater sludge used as a growth medium and as a carrier was compared with that of inoculants produced in yeast mannitol broth (YMB) medium and by using peat as a carrier. Alfalfa (Medicago sativa L.) plants were inoculated with solid and liquid Sinorhizobium meliloti inoculants and grown in pots containing two soil types (Kamouraska clay soil and Saint-André sandy soil). The effect of various levels of sludge amendment (60 and 120 kg N/ha) and nitrogen fertilizer (60 kg N/ ha) was also studied. The sludge-based inoculants showed the same symbiotic efficiency (nodulation and plant yield) as YMB-based inoculants. The inoculation increased the nodulation indexes from 4-6 to 8-12, and the rhizobial number from 10(3) (uninoculated soils) to 10(6)-10(7) cells/g in inoculated soils. However, the shoot dry weights and the nitrogen contents were not increased significantly by the inoculation. Applying sludge as an amendment enhanced the rhizobial number in soils from 10(3) to 10(4) cells/g and improved significantly the plant growth (shoot dry weights and nitrogen contents). This improvement increased with sludge rate and with the cut (three cuts). Compared with sludge, N fertilizer gave lower plant yields. The nodulation was not affected by sludge and N-fertilizer application. The texture and physico-chemical properties of soil were found to affect the yield and nitrogen content of the plants. In this study, macroelements and heavy metals were at acceptable levels and were not considered to be negative factors.     

Plant availability of zinc and copper in soil after contamination with brass foundry filter dust: effect of four years of aging

We investigated the effect of 4 yr of aging of a noncalcareous soil contaminated with filter dust from a brass foundry (80% w/w ZnO, 15% w/w Cu0.6Zn0.4) on the chemical extractability of Zn and Cu and their uptake by barley (Hordeum vulgare L.), pea (Pisum sativum L.), and sunflower (Helianthus annus L.). Pot experiments were conducted with the freshly contaminated soil (2250 mg kg-1 Zn; 503 mg kg-1 Cu), with the contaminated soil aged for 4 yr in the field (1811 mg kg-1 Zn; 385 mg kg-1 Cu), and with the uncontaminated control soil (136 mg kg-1 Zn; 32 mg kg-1 Cu). In comparison with the uncontaminated soil, the growth of barley and pea was clearly reduced in both contaminated soils, while toxicity symptoms did not systematically vary from the freshly contaminated to the 4 yr aged soil. The sunflower did not grow in the contaminated soils. The slow oxidative dissolution of the brass platelets led to an increase in the solubility and the plant uptake of Cu from the freshly contaminated to the 4 yr aged soil. In an earlier study, we found that the fine-grained ZnO dissolved in the field soil within 9 mo and that about half of the released Zn was incorporated into a layered double hydroxide phase and about half was adsorbed to the soil matrix. These changes in Zn speciation did not lead to a reduction of the Zn contents in the shoots and roots of barley and pea grown in the aged soil as compared with the freshly contaminated soil.     

Effect of Cadmium on Microbial Activity and a Ryegrass Crop in Two Semiarid Soils

Soil pollution with Cd is an environmental problem common in the world, and it is necessary to establish what Cd concentrations in soil could be dangerous to its fertility from toxicity effects and the risk of transference of this element to plants and other organisms of the food chain. In this study, we assessed Cd toxicity on soil microorganisms and plants in two semiarid soils (uncultivated and cultivated). Soil ATP content, dehydrogenase activity, and plant growth were measured in the two soils spiked with concentrations ranging from 3 to 8000 mg Cd/kg soil and incubated for 3 h, 20 days, and 60 days. The Cd concentrations that produced 5%; 10%;, and 50%; inhibition of each of the two soil microbiological parameter studied (ecological dose, ED, values) were calculated using two different mathematical models. Also, the effect of Cd concentration on plant growth of ryegrass (Lolium perenne, L.) was studied in the two soils. The Cd ED values calculated for soil dehydrogenase activity and ATP content were higher in the agricultural soils than in the bare soil. For ATP inhibition, higher ED values were calculated than for dehydrogenase activity inhibition. The average yields of ryegrass were reduced from 5.03 to 3.56 g in abandoned soil and from 4.21 to 1.15 g in agricultural soil with increasing concentrations of Cd in the soil. Plant growth was totally inhibited in abandoned and agricultural soils at Cd concentrations above 2000 and 5000 mg/kg soil, respectively. There was a positive correlation between the concentration of Cd in the plants and the total or DTPA-extractable concentrations of Cd in the soil.     

The effects of pulverized refuse fines (PRF) as a soil material on plant growth

Pulverized refuse fines (PRF) are the residual fine screenings from refuse-derived fuel plants after the removal of metals and oversize material from domestic refuse, and the extraction of the light fraction as fuel. It appears to be a potential soil amendment, but currently it is disposed of by landfilling. The glasshouse experiment described in this paper therefore evaluated its effectiveness as a soil amendment or soil material for plant growth.PRF had a slightly alkaline pH and was high in organic carbon and soluble salts. Unamended PRF supported significantly higher yields of ryegrass than PRF mixed with a sandy soil at 2 and 10% (w/w), and was comparable to that of sewage sludge and sludge-amended PRF. On the other hand, PRF supplemented with inorganic nitrogen or phosphorus resulted in better yields than PRF alone. Despite the high C/N ratio of PRF, nitrogen recovery in ryegrass suggested that mineralization was sufficiently high to allow adequate plant uptake and sustained plant growth, although there was initial inhibition. Tissue contents of zinc, copper and cadmium from pure PRF treatment were not excessive and were lower than those from sewage sludge.High rate applications of PRF, which are desirable from the viewpoint of disposal, should not cause environmental degradation. PRF is not as good as commercial fertilizers or potting media, but it can be an excellent soil substitute in horticulture and land reclamation.     

Influence of plant growth on degradation of linear alkylbenzene sulfonate in sludge-amended soil

Widespread application of sewage sludge to agricultural soils in Denmark has led to concern about the possible accumulation and effects of linear alkylbenzene sulfonate (LAS) in the soil ecosystem. Therefore, we have studied the uptake and degradation of LAS in greenhouse pot experiments. Sewage sludge was incorporated into a sandy soil to give a range from very low to very high applications (0.4 to 90 Mg dry wt. ha(-1)). In addition, LAS was added as water solutions. The soil was transferred to pots and sown with barley (Hordeum vulgare L. cv. Apex), rape (Brassica napus L. cv. Hyola 401), or carrot (Daucus carota L.). Also, plant-free controls were established. For all additions there was no plant uptake above the detection limit at 0.5 mg LAS kg(-1) d.w, but plant growth stimulated the degradation. With a growth period of 30 d, LAS concentrations in soil from pots with rape had dropped from 27 to 1.4 mg kg(-1) dry wt., but in plant-free pots the concentration decreased only to 2.4 mg kg(-1) dry wt. When LAS was added as a spike, the final concentration in soil from planted pots was 0.7 mg kg(-1) dry wt., but in pots without plants the final concentration was much higher (2.5 mg kg(-1) dry wt.). During degradation, the relative fraction of homologues C10, C11, and C12 decreased, while C13 increased.     

A biotest for evaluating copper bioavailability to plants in a contaminated soil

This work aimed at defining the optimal conditions for a novel ecotoxicological test designed for evaluating the bioavailability and phytotoxicity of metals to plants. This biotest, which provided easy access to roots, shoots, and rhizosphere soil, was applied to a vineyard calcareous soil that had been contaminated by the application of Cu fungicides. A preliminary hydroponic experiment comparing various levels of solution Cu concentration enabled us to determine the no observable adverse effects concentration (NOAEC), which was in the range 5 to 20 microM total Cu (0.01-0.06 microM free Cu ion) for rape (Brassica napus L. cv. Goeland). For the biotest, rape was grown in hydroponic conditions for 21 d in pots designed so that plants developed a planar mat of roots at the surface of a polyamide mesh. By then, the plants were transferred for 4 or 8 d onto a 1- or 3-mm-thick soil layer that was separated from the root mat by the mesh and connected to a reservoir of nutrient solution or deionized water via a filter paper wick. An 8-d period was the best option as it enabled plant growth to be significant. The use of 1-mm soil thickness was recommended if the biotest aimed at investigating root-induced changes in the rhizosphere. Although it may cause some artifacts, compared with deionized water, nutrient solution provided better standardized conditions for comparing widely differing soil samples. The studied soil did not induce any Cu phytotoxicity in spite of its fairly large total Cu content.     

Cupric ion activity in peat soil as a toxicity indicator for maize

Copper phytotoxicity in soils is difficult to assess because Cu accumulates at and damages roots, and is not readily transferred to shoots. Soil chemical properties strongly influence Cu speciation, so that total soil Cu alone is not a broadly useful indicator of potential toxicity to plants. The present study measured free Cu2+ activity in Cu-enriched peat soils using the ion selective electrode. The soil Cu2+ activity was related to the severity of phytotoxicity as measured by several indicators in a maize (Zea mays L.) bioassay, including leaf chlorosis, root stunting, and reduced shoot growth and Fe concentration. A soil Cu2+ activity of 10(-7.0) to 10(-7.5), corresponding to total Cu of about 275 mg/kg in the peat soil, caused phytotoxicity in maize seedlings. It is proposed that Cu2+ activity is more directly related to phytotoxic effects than other soil tests, such as extractions with strong acids or chelating agents, because it is the free Cu2+ in soil solution that has the most direct toxic effects on roots. There was very limited uptake of Cu into maize shoots, and even when Cu2+ activity and total soil Cu were raised into the extreme toxicity range of 10(-5) and 4,000 mg/ kg, respectively, shoot Cu remained less than 35 mg/kg. These results indicate the inadequacy of the USEPA risk assessment of potential for Cu toxicity to crops amended with sewage sludge, which assumed a no-effect level of maize shoot Cu of 40 mg/kg.     

Influence of soil properties and aging on the toxicity of copper on compost worm and barley

Influence of soil properties and aging on Cu partitioning and toxicity was assessed on 10 artificial soils constituted using a statistical design considering pH (5.5 and 7.5), organic matter (1-30% [w/w]), and clay content (5-35% [w/w]). Total Cu as well as water-, CaCl2-, and diethylene triamine pentaacetic acid (DTPA)-extracted Cu fractions were determined for each soil mixture. Ecotoxic effect was assessed by determining growth inhibition of barley (Hordeum vulgare L.) and compost worm (Eisenia fetida) mortality. Analyses were repeated after a 16-wk aging period of the soils at pH 7.5 (8 x 2-wk wetting and drying cycle). Results indicated that pH was the main factor controlling Cu partitioning, ahead of organic matter and clay content. Calcium chloride (0.5 M)-extracted Cu fractions showed the best correlation with toxic responses (r = 0.55-0.66; p < 0.05), while total and DTPA-extracted Cu concentrations could not explain differences in toxicity. Direct regressions between toxicity and soil properties (pH, organic matter, and clay content) provided better explanation of variance: r2= 0.50 (p = 0.00006) for compost worm mortality, r2= 0.77 (p < 0.00001) for barley shoot inhibition, and r2= 0.92 (p < 0.00001) for barley root inhibition. Copper toxicity was mainly influenced by pH and, to a lesser extent, by organic matter and clay content. Aging in organic soils revealed a slight reduction in ecotoxicity while an increase was observed in soils with low organic matter content. Further investigation using longer aging periods would be necessary to assess the significance of this observation.     

The role of nitrilotriacetate in copper uptake by tobacco

In growth chamber experiments we studied the effect of nitrilotriacetate (NTA) on Cu uptake by tobacco (Nicotiana tabacum L.). Plants were exposed for 6 d to 126 microM Cu and 500 microM NTA in nutrient solutions without and with 10 g L(-1) montmorillonite. Approximately seven times less Cu was dissolved in the montmorillonite solutions than in the nutrient solutions alone. In the absence of NTA, montmorillonite effectively competed with plant roots for Cu, although Cu remained bound to the roots. Nitrilotriacetate increased Cu uptake and translocation into shoots of tobacco by a factor of 3.5 from the nutrient solution and by a factor of 26 from the montmorillonite nutrient solution. Neither growth reduction nor any other visible sign of Cu toxicity was found in the presence of NTA with Cu concentrations of 190 mg kg(-1) in the shoots. In the absence of NTA, high Cu concentrations in root samples led to a brownish discoloration of the roots.     

Soil fate of agricultural fumigants in raised-bed, plasticulture systems in the southeastern United States

Soil concentrations and degradation rates of methyl isothio-cyanate (MITC), chloropicrin (CP), 1,3-dichloropropene (1,3-D), and dimethyl disulfide (DMDS) were determined under fumigant application scenarios representative of commercial raised bed, plastic mulched vegetable production systems. Five days after application, 1,3-D, MITC, and CP were detected at concentrations up to 3.52, 0.72, and 2.45 μg cm, respectively, in the soil atmosphere when applications were made in uniformly compacted soils with a water content >200% of field capacity and covered by a virtually impermeable or metalized film. By contrast, DMDS, MITC, and CP concentrations in the soil atmosphere were 0.81, 0.02, and 0.05 μg cm, respectively, 5 d after application in soil containing undecomposed plant residue, numerous large (>3 mm) clods, and water content below field capacity and covered by low-density polyethylene. Ranked in order of impact on the persistence of fumigants in soil were soil water content (moisture), soil tilth (the physical condition of soil as related to its fitness as a planting bed), the type of plastic film used to cover fumigated beds, and soil texture. Fumigants were readily detected 13 d after application when applied in uniformly compacted soils with water contents >200% of capacity and covered by a virtually impermeable or metalized film. By contrast, 1,3-D and MITC had dissipated 5 d after application in soils with numerous large (>3 mm) clods and water contents below field capacity that were covered by low-density polyethylene. Soil degradation of CP, DMDS, and MITC were primarily attributed to biological mechanisms, whereas degradation of 1,3-D was attributed principally to abiotic factors. This study demonstrates improved soil retention of agricultural fumigants in application scenarios representative of good agricultural practices.     

Distribution and leaching of methyl iodide in soil following emulated shank and drip application

Methyl iodide (MeI) is a promising alternative to methyl bromide in soil fumigation. The pest-control efficacy and ground water contamination risks of MeI as a fumigant are highly related to its gas-phase distribution and leaching after soil application. In this study, the distribution and leaching of MeI in soil following shank injection and subsurface drip application were investigated. Methyl iodide (200 kg ha(-1)) was directly injected or drip-applied at a 20-cm depth into Arlington sandy loam (coarse-loamy, mixed, thermic Haplic Durixeralfs) columns (12-cm i.d., 70-cm height) tarped with virtually impermeable film. Concentration profiles of MeI in the soil air were monitored for 7 d. Methyl iodide diffused rapidly after soil application, and reached a 70-cm depth within 2 h. Relative to shank injection, drip application inhibited diffusion, resulting in significantly lower concentration profiles in the soil air. Seven days after MeI application, fumigated soil was uncapped, aerated for 7 d, and leached with water. Leaching of MeI was significant from the soil columns under both application methods, with concentrations of >10 mug L(-1) in the early leachate. The leaching was greater following shank injection than drip application, with an overall potential of 33 g ha(-1) for shank injection and 19 g ha(-1) for drip application. Persistent residues of MeI remaining in soils after leaching were 50 to 240 ng kg(-1), and the contents were slightly higher following shank injection than drip application. The results suggest that fumigation with MeI may pose a risk of ground water contamination in vulnerable areas.     

Biowaste effects on soil and native plants in a semiarid ecosystem

Many soils of the Mediterranean region with a semiarid climate are subjected to progressive degradation as a result of water erosion. Biosolids and municipal solid wastes (MSW) were surface-applied once at three rates (40, 80, and 120 Mg ha(-1)) to different plots in a degraded semiarid ecosystem. The study was conducted to determine the effects of such applications on soil chemical properties and native vegetation over a three-year period. Soil N, P, and K initially increased with increasing biowaste application rates, but then decreased over time. Levels of Zn and Cu were higher in MSW than biosolid-treated plots, and increased in both years after application. Concentrations of soil Cd, Pb, Ni, and Cr did not change as a result of biowaste amendment in the study period. The growth of native plants was enhanced by the addition of biowastes. Total plant canopy and plant biomass increased significantly and remained higher in all treatments than in the control plot over the three-year period. The species richness of native plants decreased with increasing biowaste rates. Differences in the development of native plant communities between treatments were observed, and were more remarkable three years after biowaste application. Tissue N, P, K, Zn, and Cu levels increased with the biowaste application rate, but concentrations of tissue Pb, Cd, Ni, and Cr did not increase significantly. Biowastes applied at the rate of 80 Mg ha(-1) gave rise to the most favorable soil and native vegetation results while avoiding environmental risks.     

Impact of genetically modified crops on soil- and plant-associated microbial communities

Transgenic or genetically modified plants possess novel genes that impart beneficial characteristics such as herbicide resistance. One of the least understood areas in the environmental risk assessment of genetically modified crops is their impact on soil- and plant-associated microbial communities. The potential for interaction between transgenic plants and plant residues and the soil microbial community is not well understood. The recognition that these interactions could change microbial biodiversity and affect ecosystem functioning has initiated a limited number of studies in the area. At this time, studies have shown the possibility that transgenes can be transferred to native soil microorganisms through horizontal gene transfer, although there is not evidence of this occurring in the soil. Furthermore, novel proteins have been shown to be released from transgenic plants into the soil ecosystem, and their presence can influence the biodiversity of the microbial community by selectively stimulating the growth of organisms that can use them. Microbial diversity can be altered when associated with transgenic plants; however, these effects are both variable and transient. Soil- and plant-associated microbial communities are influenced not only by plant species and transgene insertion but also by environmental factors such as field site and sampling date. Minor alterations in the diversity of the microbial community could affect soil health and ecosystem functioning, and therefore, the impact that plant variety may have on the dynamics of the rhizosphere microbial populations and in turn plant growth and health and ecosystem sustainability, requires further study.     

Growth and elemental accumulation by canola on soil amended with coal fly ash

To explore the agronomic potential of an Australian coal fly ash, we conducted two glasshouse experiments in which we measured chlorophyll fluorescence, CO2 assimilation (A), transpiration, stomatal conductance, biomass accumulation, seed yield, and elemental uptake for canola (Brassica napus) grown on soil amended with an alkaline fly ash. In Experiment 1, application of up to 25 Mg/ha of fly ash increased A and plant weight early in the season before flowering and seed yield by up to 21%. However, at larger rates of ash application A, plant growth, chlorophyll concentration, and yield were all reduced. Increases in early vigor and seed yield were associated with enhanced uptake of phosphorus (P) by the plants treated with fly ash. Fly ash application did not influence accumulation of B, Cu, Mo, or Zn in the stems at any stage of plant growth or in the seed at harvest, except Mo concentration, which was elevated in the seed. Accumulation of these elements was mostly in the leaves, where concentrations of Cu and Mo increased with any amount of ash applied while that of B occurred only with ash applied at 625 Mg/ha. In Experiment 2, fly ash applied at 500 Mg/ha and mixed into the whole 30 cm soil core was detrimental to growth and yield of canola, compared with restricting mixing to 5 or 15 cm depth. In contrast, application of ash at 250 Mg/ha with increasing depth of mixing increased A and seed yield. We concluded that fly ash applied at not more than 25 Mg/ha and mixed into the top 10 to 15 cm of soil is sufficient to obtain yield benefits.     

Agricultural recycling of treatment-plant sludge: a case study for a vegetable-processing factory

The present study evaluated the possibility of using the sludge produced by a vegetable-processing factory in agriculture. The sludge was amended with a soil mixture (i.e., a mixture of sand, soil, and manure) and was applied at 0, 165, 330, 495 and 660 t/ha to promote the growth of cucumbers. The effects of various sludge loadings on plant growth were assessed by counting plants and leaves, measuring stem lengths, and weighing the green parts and roots of the plants. We also compared heavy metal uptake by the plants for sludge loadings of 330, 495, and 660 t/ha with various recommended standards for vegetables. Our results showed that plant growth patterns were influenced to some extent by the sludge loadings. In general, the number of leaves, stem length, and dry weight of green parts exhibited a pronounced positive growth response compared with an unfertilized control, and root growth showed a lesser but still significant response at sludge loadings of 165 and 330 t/ha. The sludge application caused no significant increase in heavy metal concentrations in the leaves, though zinc (Zn) and iron (Fe) were found at elevated concentrations. However, despite the Zn and Fe accumulation, we observed no toxicity symptoms in the plants. This may be a result of cucumber's tolerance of high metal levels.     

Growth management of vetiver (Vetiveria zizanioides) under Mediterranean conditions

In spite of the advantages of Vetiver grass in light of environmental aspects, this plant is not used in the Mediterranean region. The objectives of the present study were: (i) to elucidate growth parameters and establishment of Vetiver under Mediterranean conditions suitable for its various environmental applications; and (ii) to develop management practices for growing vetiver under Mediterranean conditions. In greenhouse experiments conducted under controlled conditions it was found that, in general, increasing the minimum/maximum temperatures to 21-29 degrees C significantly increased plant height. In the Mediterranean region, this range of air temperatures is obtained mainly during the summer, from June to September. For air temperatures up to 15-23 degrees C the effect of day length on plant height was insignificant, whereas in air temperature >15-23 degrees C, the plant heights under long day conditions were significantly higher than under short day. The number of sprouts per plant increased exponentially with increasing air temperature, and was not significantly affected by the day length at any air temperature range. In open fields, the heights of irrigated vetiver plants were significantly higher than those of rain-fed plants. It was concluded that, once they were established, vetiver plants could survive the dry summer of the Mediterranean region under rain-fed conditions, but they would be shorter than under irrigation. Cutting or burning of the plant foliage during the spring did not improve the survival of vetiver during the dry summer. In order to obtain fast growth of vetiver and to increase the possibility of its using the rainwater, the plants should be planted in the winter, during February and March. However, under this regime, the vetiver plant cannot be used as a soil stabilizer during the first winter, because the plant is still small. In contrast, under irrigation it is advantageous to plant vetiver at the beginning of the summer; the plant then has sufficient time to grow and develop before the beginning of the winter, so that its effect as a soil stabilizer in the following wet winter could be maximal. It was found that vetiver could grow in a wide range of substrates, such as: sandy soil, loamy sand, clay soil, crushed limestone, sandy clay loam, and tuff/peat mixture.     

Effect of chloride in soil solution on the plant availability of biosolid-borne cadmium

Increasing chloride (Cl) concentration in soil solution has been shown to increase cadmium (Cd) concentration in soil solution and Cd uptake by plants, when grown in phosphate fertilizer- or biosolid-amended soils. However, previous experiments did not distinguish between the effect of Cl on biosolid-borne Cd compared with soil-borne Cd inherited from previous fertilizer history. A factorial pot experiment was conducted with biosolid application rates of 0, 20, 40, and 80 g biosolids kg(-1) and Cl concentration in soil solution ranging from 1 to 160 mM Cl. The Cd uptake of wheat (Triticum aestivum L. cv. Halberd) was measured and major cations and anions in soil solution were determined. Cadmium speciation in soil solution was calculated using GEOCHEM-PC. The Cd concentration in plant shoots and soil solution increased with biosolid application rates up to 40 g kg(-1), but decreased slightly in the 80 g kg(-1) biosolid treatment. Across biosolid application rates, the Cd concentration in soil solution and plant shoots was positively correlated with the Cl concentration in soil solution. This suggests that biosolid-borne Cd is also mobilized by chloride ligands in soil solution. The soil solution CdCl+ activity correlated best with the Cd uptake of plants, although little of the variation in plant Cd concentrations was explained by activity of CdCl+ in higher sludge treatments. It was concluded that chlorocomplexation of Cd increased the phytoavailability of biosolid-borne Cd to a similar degree as soil (fertilizer) Cd. There was a nonlinear increase in plant uptake and solubility of Cd in biosolid-amended soils, with highest plant Cd found at the 40 g kg(-1) rate of biosolid application, and higher rates (80 g kg(-1)) producing lower plant Cd uptake and lower Cd solubility in soil. This is postulated to be a result of Cd retention by CaCO3 formed as a result of the high alkalinity induced by biosolid application.     

Phytoremediation of aged petroleum sludge: effect of irrigation techniques and scheduling

The use of higher plants to accelerate the remediation of petroleum contaminants in soil is limited by, among other factors, rooting depth and the delivery of nutrients to the microsites at which remediation occurs. The objective of this study was to test methods of enhancing root growth and remediation in the subsurface of a contaminated petroleum sludge. The phytoremediation of highly contaminated petroleum sludge (total petroleum hydrocarbons >35 g kg(-1) was tested in the greenhouse as a function of the frequency and the depth of irrigation and fertilization. Water and dissolved plant nutrients were added to the soil surface or at a depth of 30 cm, either daily or weekly. Equivalent quantities of water and nutrients were added in all cases. Daily irrigation at a depth of 30 cm invoked greater root growth and enhanced contaminant degradation relative to all other treatments. In the absence of plants, residual concentrations of petroleum hydrocarbons after 7 mo were higher than with plants. The presence of plant roots clearly improved the physical structure of the soil and increased microbial populations. Thus, the plant roots in conjunction with daily additions of soluble N and P appeared to enhance oxygen transport to greater depths in the soil, stimulate petroleum-degrading microorganisms, and provide microbial access to soil micropores. Subsurface irrigation with frequent, small amounts of water and nutrients could significantly accelerate phytoremediation of field soils contaminated with petroleum hydrocarbons.