Deposition of motor vehicle emissions and winter maintenance along roadside assessed by snow analyses

A vertical snow-sampling method, where a sample was taken throughout the snowpack, was used to estimate the pollutant load on a roadside where average daily traffic density was about 9100 motor vehicles. The snow samples were collected at two sites, forest and open field, at two distances of 10 and 30 m from the road. The concentrations of inorganic anions (Cl(-), NO(-)(3), SO(2-)(4)), total N, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated phenols (PCPhs) were analysed. The results suggest that on roadsides there is a deposition caused by road traffic emissions and winter maintenance which exceeds normal background deposition. Inorganic anions mainly in particle form, originating from winter maintenance, are deposited near the road. PAHs with low molecular weight (相似文献   

Identification of magnetic particulates in road dust accumulated on roadside snow using magnetic, geochemical and micro-morphological analyses

The aim of this study is to test the applicability of snow surveying in the collection and detailed characterization of vehicle-derived magnetic particles. Road dust extracted from snow, collected near a busy urban highway and a low traffic road in a rural environment (southern Finland), was studied using magnetic, geochemical and micro-morphological analyses. Significant differences in horizontal distribution of mass specific magnetic susceptibility (χ) were noticed for both roads. Multi-domain (MD) magnetite was identified as the primary magnetic mineral. Scanning electron microscope (SEM) analyses of road dust from both roads revealed: (1) angular-shaped particles (diameter ∼1-300 μm) mostly composed of Fe, Cr and Ni, derived from circulation of motor vehicles and (2) iron-rich spherules (d ∼ 2-70 μm). Tungsten-rich particles (d < 2 μm), derived from tyre stud abrasion were also identified. Additionally, a decreasing trend in χ and selected trace elements was observed with increasing distance from the road edge.     

Monitoring of heavy metal concentrations in home outdoor air using moss bags

One monitoring station is insufficient to characterize the high spatial variation of traffic-related heavy metals within cities. We tested moss bags (Hylocomium splendens), deployed in a dense network, for the monitoring of metals in outdoor air and characterized metals’ long-term spatial distribution and its determinants in Girona, Spain. Mosses were exposed outside 23 homes for two months; NO₂ was monitored for comparison. Metals were not highly correlated with NO₂ and showed higher spatial variation than NO₂. Regression models explained 61-85% of Cu, Cr, Mo, Pb, Sb, Sn, and Zn and 72% of NO₂ variability. Metals were strongly associated with the number of bus lines in the nearest street. Heavy metals are an alternative traffic-marker to NO₂ given their toxicological relevance, stronger association with local traffic and higher spatial variability. Monitoring heavy metals with mosses is appealing, particularly for long-term exposure assessment, as mosses can remain on site many months without maintenance.     

Multipoint moss passive samplers assessment of urban airborne polycyclic aromatic hydrocarbons: concentrations profile and distribution along Warsaw main streets

Polycyclic aromatic hydrocarbons (PAHs) distribution along 28 km of Warsaw main street have been surveyed in July 2000 using moss passive samplers as a simple and economic surrogate of direct air sampling. Altogether 74 samplers at 39 crossroads with traffic lights were placed on the lamp post approximately/=3.5 m above ground. PAHs levels determined in samplers are in range from 828 to 3573 ng/g moss dry weight. The spatial spread of pollution within this range is statistically close to normal distribution with mean value of 2332 ng/g. Variability within and between study areas are rationalized in terms of urban environmental factors. PAHs concentrations profiles across the town have appeared uniform. The dominant compounds are phenantrene, fluoranthene and pyrene. Their contribution is 49-68% of total PAHs burden.     

Air quality for metals and sulfur in Shanghai, China, determined with moss bags

In order to better understand the spatial and temporal distribution pattern of metals and sulfur present in Shanghai, moss bags with Haplocladium microphyllum (Hedw.) Broth. were suspended at 14 local monitoring stations from April through June 2006 in Shanghai, the largest city in China. The results showed that the concentrations of S, Cu, Pb, and Zn in the moss bags after exposure were higher at the sites in the industrial district and most urban districts and lower at the sites in suburban areas, and well correlated with SO₂ API and PM10 API in the air both in terms of space and time. The present study provided evidence that the moss H. microphyllum is suitable for bio-monitoring air pollution with moss bags and further confirmed that the moss-bag method is a simple, inexpensive and useful technique.     

Lichen and moss bags as monitoring devices in urban areas. Part I: influence of exposure on sample vitality

Samples of the lichen Pseudevernia furfuracea (L.) Zopf and the moss Hypnum cupressiforme Hedw. were exposed for 6 weeks in nylon bags in two air pollution monitoring stations in Trieste and Naples (Italy) with different climates and pollution loads to evaluate influence of environmental conditions on sample vitality. This was assessed before and after exposure by transmission electron microscopy observations, K cellular location, and measurements of C, N, S and photosynthetic pigments content, CO2 gas exchange, and chlorophyll fluorescence. Almost all data sets indicate that exposures caused some damage to the species, considerably heavier in the moss, especially in Naples. The two cryptogams differed significantly in accumulation and retention of C, N, and S, the lichen clearly reflecting NO2 availability. The difference in vitality loss was related to the different ecophysiology of the species, because concentrations of phytotoxic pollutants were low during exposure. Critical notes on the analytical techniques are also given.     

Impact of roadside noise barriers on particle size distributions and pollutants concentrations near freeways

Increasing epidemiological evidence has established an association between a host of adverse health effects and exposure to ambient particulate matter (PM) and co-pollutants, especially those emitted from motor vehicles. Although PM and their co-pollutants dispersion profiles near the open freeway have been extensively characterized by means of both experimental measurements and numerical simulations in recent years, such investigations near freeways with roadside barriers have not been well documented in the literature. A few previous studies suggested that the presence of roadside structures, such as noise barriers and vegetation, may impact the decay of pollutant concentrations downwind of the freeway by limiting the initial dispersion of traffic emissions and increasing their vertical mixing due to the upward deflection of airflow. Since the noise barriers are now common roadside features of the freeways, particularly those running through populated urban areas, it is pertinent to investigate the impact of their presence on the particles and co-pollutants concentrations in areas adjacent to busy roadways. This study investigated two highly trafficked freeways (I-710 and I-5) in Southern California, with two sampling sites for each freeway, one with and the other without the roadside noise barriers. Particle size distributions and co-pollutants concentrations were measured in the immediate proximity of freeways and at different distances downwind of the freeways. The results showed the formation of a “concentration deficit” zone in the immediate vicinity of the freeway with the presence of roadside noise barrier, followed by a surge of pollutant concentrations further downwind at 80–100 m away from freeway. The particle and co-pollutants concentrations reach background levels at farther distances of 250–400 m compared to 150–200 m at the sites without roadside noise barriers.     

Atmospheric trace metal pollution in the Naples urban area based on results from moss and lichen bags

The results of trace element content analysed in Sphagnum capillifolium and Pseudevernia furfuracea exposed in bags in 1999 are reconsidered to evaluate the reliability of moss and lichen transplants to detect urban trace element atmospheric pollution, using Naples as a case example. After 4 months' exposure, trace element concentrations were at least twice as high as the pre-exposure values and in general higher in Sphagnum than in Pseudevernia. Moss samples were enriched in the following order: As=Cu>Mo>Pb>V>Co>Cr>Zn; lichen samples in the order: Mo>Cu>As=Co=Ni>V>Pb. Based on the calculation of a cumulative load factor, all sites located along the coast had higher trace element loads compared to sites in the hilly inland area. Complementary SEM, TEM and EDS observations showed, despite significant damage to tissue and cell integrity, the recurrent presence of particulate matter in moss and lichen, indicating the considerable presence of dust in the urban atmosphere which, according to chemical composition, may be due both to anthropogenic and natural sources such as volcanic rock and soil and sea salts.     

Trace element accumulation by moss and lichen exposed in bags in the city of Naples (Italy)

This paper presents the results of a bioaccumulation study of trace elements in the Naples urban area based on the use of the moss Sphagnum capillifolium (Ehrh.) Hedw. and the lichen Pseudevernia furfuracea (L.) Zopf exposed in bags in 23 sites. Moss and lichen bags were exposed for 4 months starting from the beginning of July 1999. Bags gathering was carried out after 10 weeks of exposure, at the end of the dry season, and after 17 weeks, during the wet season. The elements Al, As, Ca, Cd, Cr, Co, Cu, Fe, K, Mg, Mn, Mo, Ni, Pb, Ti, V and Zn were analysed by inductively coupled plasma-mass spectrometry ICP-MS in both biomonitors. For the majority of the elements the total amounts found in S. capillifolium were higher than in P. furfuracea whether considering the whole period of exposure or the weekly uptake. It was observed that there was a much greater difference in metal accumulation by P. furfuracea between the dry and wet seasons compared with S. capillifolium. In the wet period, the lichen seems to accumulate a larger quantity of metals. With the exception of Mn, trace element concentrations did not appear to be significantly affected by the washing away of rainfall. K loss during exposure suggested cell membrane damage in both organisms. For P. furfuracea the K leakage was limited to the dry period of exposure. A clear distinction between "lithophilic" and "anthropogenic" elements was achieved by cluster analysis. Significant correlations were found among Fe-Cu-Cr-Ni, Pb-Cd-Co, V-Cr-Ni, Zn-Ni-Pb, suggesting a common source for each group of elements.     

Study of organochlorine pollutants in snow at North Pole and comparison to the snow at north, central and south Finland

Organic pollutants, especially polychlorinated hydrocarbons, phenols, guaiacols and catechols have been studied by analyses of snow samples from North Pole, May 1984. All of these pollutants were below the limit of determination which was estimated to be as fallout 0.1–0.05 μg/m² for individual compounds. For comparison, snow samples from Central Finland and South Finland 1983–1985 also showed non-detectable levels of chlorinated hydrocarbons but well measurable levels of chlorophenol compounds which were significantly higher at urban (heavy traffic) than rural and higher at South than Central Finnish places, respectively. One sample from Lapland, North Finland 1985, however, had no measurable amounts of chlorophenols like the North Pole sample.     

Deterioration of bioplastic carrier bags in the environment and assessment of a new recycling alternative

Increasing environmental concerns and the introduction of technologies based on renewable resources have stimulated the replacement of persistent petroleum-derived plastics with biodegradable plastics from biopolymers. As a consequence, a variety of products are currently manufactured from bioplastic, including carrier bags. This series of studies investigated the deterioration of carrier bags made with Mater-Bi (MB), a starch-based bioplastic, in soil, compost and two aquatic ecosystems, a littoral marsh and seawater. Results from the laboratory study indicated that bioplastic carrier bags were rapidly deteriorated in soil and compost. After three months of incubation, weight loss of specimens was of 37% and 43% in soil and compost, respectively. Conversely, little deterioration was observed in specimens buried in soil under field conditions or exposed to water of a littoral marsh and of the Adriatic Sea. These findings were consistent with the greater number of bacteria and especially fungi capable of degrading MB that were recovered from soil and compost with respect to the two aquatic ecosystems. Considering that a variety of microbial isolates are capable of using MB as a source of carbon, a new alternative to recycle these MB-based carrier bags was explored. More specifically, starchy residues from bags were fermented by the fungus Rhizopus oryzae to produce up to 35 mg of lactic acid per g of bag residues.     

Remediation of noxious pollutants using nano-titania-based photocatalytic construction materials: a review

Environmental Science and Pollution Research - Nano-titania (n-TiO2), due to its unique photocatalytic and hydrophobic properties, can be used to prepare self-cleaning cement-based smart building...     

In situ assessment of microbial sulfate reduction in a petroleum-contaminated aquifer using push-pull tests and stable sulfur isotope analyses

Anaerobic microbial activities such as sulfate reduction are important for the degradation of petroleum hydrocarbons (PHC) in contaminated aquifers. The objective of this study was to evaluate the feasibility of single-well push-pull tests in combination with stable sulfur isotope analyses for the in situ quantification of microbial sulfate reduction. A series of push-pull tests was performed in an existing monitoring well of a PHC-contaminated aquifer in Studen (Switzerland). Sulfate transport behavior was evaluated in a first test. In three subsequent tests, we injected anoxic test solutions (up to 1000 l), which contained 0.5 mM bromide (Br-) as conservative tracer and 1 mM sulfate (SO4(2-)) as reactant. After an initial incubation period of 42.5 to 67.9 h, up to 1100 l of test solution/groundwater mixture was extracted in each test from the same location. During the extraction phases, we measured concentrations of relevant species including Br-, SO4(2-) and sulfide (S(-II)), as well as stable sulfur isotope ratios (delta 34S) of extracted, unconsumed SO4(2-) and extracted S(-II). Results indicated sulfate reduction activity in the vicinity of the test well. Computed first-order rate coefficients for sulfate reduction ranged from 0.043 +/- 0.013 to 0.130 +/- 0.015 day-1. Isotope enrichment factors (epsilon) computed from sulfur isotope fractionation of extracted, unconsumed SO4(2-) ranged from 20.2 +/- 5.5@1000 to 22.8 +/- 3.4@1000. Together with observed fractionation in extracted S(-II), isotope enrichment factors provided strong evidence for microbially mediated sulfate reduction. Thus, push-pull tests combined with stable sulfur isotope analyses proved useful for the in situ quantification of microbial sulfate reduction in a PHC-contaminated aquifer.     

Comparative assessment of air quality in two health resorts using carbon isotopes and palynological analyses

This paper describes results of applying the palynological and carbon isotopic analysis of the organic fraction of Total Suspended Particles (TSP) to discriminate distinct pollution sources and assess the anthropogenic impact for the investigated areas. The samples of atmospheric particles were collected in Czerniawa and Cieplice (two health resorts in Lower Silesia, SW Poland) twice a year in summer and winter season (from July 2006 to February 2008). The palynological spectra represent in the vast majority local plant communities without a noticeable contribution of long-transported plant particles. Palynological analysis revealed also differences in the specificity of the two sampling areas, i.e. the higher contribution of identified organic material in Czerniawa stands for more natural character of this site, but is also responsible for the higher allergic pressure when compared to Cieplice. The carbon isotopic composition of TSP varied seasonally (δ¹³C value from ?27.09‰ in summer to ?25.47‰ in winter). The increased δ¹³C value in winter (heating period) is most probably caused by uncontrolled contribution of coal soot. On the basis of isotopic mass balance the calculated contribution of anthropogenic organic particles in the atmosphere reached in winter season 72% in Czerniawa and 79% in Cieplice.     

Lichen and moss bags as monitoring devices in urban areas. Part II: trace element content in living and dead biomonitors and comparison with synthetic materials

Lobes of the lichen Pseudevernia furfuracea (L.) Zopf and shoots of the moss Hypnum cupressiforme Hedw. were subjected to different treatments (water washing, oven drying, HNO3 washing, NH4-oxalate extraction) to assess the influence of vitality on accumulation efficiency, during a 6-week exposure in bags in two Italian cities, Trieste and Naples. No trend emerged between treatments, in terms of accumulation ability, for major and trace elements. Only water-washed lichens showed an increased C and N content after exposure in both cities. Element concentrations generally reached higher values in mosses than in lichens, especially for Al, Fe, and Zn (both cities), and for Cu, Mg and Na (Naples). Surface development strongly influenced accumulation capacity of the biomonitors. Quartzose and cation exchange filters revealed, on a weight basis, a poor performance. In urban environments, surface interception of atmospheric particulate seems to play a major role in accumulation, irrespective of organism vitality.     

Inactivation and injury assessment of Escherichia coli during solar and photocatalytic disinfection in LDPE bags

Solar disinfection (SODIS) of Escherichia coli suspensions in low-density polyethylene bag reactors was investigated as a low-cost disinfection method suitable for application in developing countries. The efficiency of a range of SODIS reactor configurations was examined (single skin (SS), double skin, black-backed single skin, silver-backed single skin (SBSS) and composite-backed single skin) using E. coli suspended in model and real surface water. Titanium dioxide was added to the reactors to improve the efficiency of the SODIS process. The effect of turbidity was also assessed. In addition to viable counts, E. coli injury was characterised through spread-plate analysis using selective and non-selective media. The optimal reactor configuration was determined to be the SBSS bag (t₅₀ = 9.0 min) demonstrating the importance of UVA photons, as opposed to infrared in the SODIS disinfection mechanism. Complete inactivation (6.5-log) was achieved in the presence of turbidity (50 NTU) using the SBSS bag within 180 min simulated solar exposure. The addition of titanium dioxide (0.025 g L⁻¹) significantly enhanced E. coli inactivation in the SS reactor, with 6-log inactivation observed within 90 min simulated solar exposure. During the early stages of both SODIS and photocatalytic disinfection, injured E. coli were detected; however, irreversible injury was caused and re-growth was not observed. Experiments under solar conditions were undertaken with total inactivation (6.5-log) observed in the SS reactor within 240 min, incomplete inactivation (4-log) was observed in SODIS bottles exposed to the same solar conditions.     

Gaseous pollutants emitted from a mechanical biological treatment plant for municipal solid waste: Odor assessment and photochemical reactivity

The concentrations and chromatographic profiles of gaseous pollutants emitted from a municipal solid waste (MSW) biological treatment plant were investigated to identify the major odor substances and atmospheric photochemical reactive species (PRS). Four methods were used to measure different gaseous pollutants in this study, including colorimetric tubes, gas chromatography with mass spectrometry/flame ionization detection/pulsed flame photometric detection (GC-MS/FID/PFPD) preceded by cold trap concentration, GC-FID preceded by solid-phase microextraction (SPME), and high-performance liquid chromatography (HPLC) after derivation by 2,4-dinitrophenylhydrazine (DNPH). Seventy-five gaseous compounds belonging to nine groups (nitrogen compounds, sulfur compounds, alkanes, alkenes, aromatics, terpenes, alcohols, carbonyls, and volatile fatty acids [VFAs]) were identified. In the pre-biotreatment facility, the total concentration of the gaseous pollutants reached the maximum value on day 7 (317 ppm). During the post-biotreatment process, the total concentration of gaseous pollutants decreased from 331 ppm at the beginning to 162 ppm in the end. The group with the greatest decrease was carbonyls, from 64 to 7.4 ppm, followed by alcohols, from 40 to 4.5 ppm, which were both oxygenated compounds. The proportion of aromatics was notably high in the pre-mechanical treatment facility, accounting for 50.6% of the total, revealing the xenobiotic compounds disseminated by stirring and agitating the waste in the initial stage. The proportions of nitrogen compounds were lower in the pre- and post-mechanical treatment facilities (1.5% and 6.9%) than in the pre- and post-biotreatment facilities (11.9% and 13.8%), suggesting that their generation was closely associated with waste degradation. The major odor compounds in the facilities were acetic acid, butyric acid, valeric acid, isovaleric acid, and dimethyl sulfide. The major PRS in the facilities were aromatics, acetaldehyde, butyraldehyde, hexanal, isopentyl aldehyde, alcohol, α-pinene, limonene, and terpinene. Outside the facilities, VFAs and aromatics were the most important compounds causing an environmental impact.

Implications: The aim of this work is to assess the gaseous environmental impacts of mechanical biological treatment technology. The emission of gaseous pollutants greatly affects the living quality of nearby residents and odor complaints are becoming a major problem now. In this study, the authors utilized various pretreatment and analytical methods to obtain integrated emission information of gaseous pollutants. The results showed the transformation and fate of the gas pollutants during the treatment processes, which would help to improve the processes and to mitigate gaseous pollution.

Supplemental Materials: Supplemental materials are available for this paper. Go to the publisher's online edition of the Journal of the Air & Waste Management Association for information on the concentrations of the nine compound families at different sampling locations in the plant.     

Distribution of trace metals in moss biomonitors and assessment of contamination sources in Portugal

A biomonitoring survey using the moss species [Hypnum cupressiforme Hedw. and Scelopodium touretii (Brid.) L. Kock] was performed in the whole territory of Portugal, in order to evaluate the atmospheric deposition of the following elements: Cd. Cr, Cu, Fe, Mn, Ni, Pb and Zn. The concentrations of the same elements were also obtained in two types of soil samples, collected under the moss and in nearby plots without any plant coverage, and relationships between moss and soil concentrations was investigated using the multivariate statistical method of Co-inertia Analysis. Also, relationships between concentrations in moss and several anthropogenic, geologic, pedologic and environmental parameters were screened using the same method of Co-inertia Analysis. Higher concentrations of Cu, Pb and Zn were found in areas of higher population density, with higher gasoline consumption, while higher values of Fe and Cr occur in the driest region, with lower plant coverage, indicating strong contamination by resuspended soil particles. Results also show good agreement between moss and soil contents, even for elements with high contribution of anthropogenic sources. The spatial pattern in Portugal of element contents in mosses were also detected and discussed in relation to local contamination sources.