99 % yield biodiesel production from rapeseed oil using benzyl bromide–CaO catalyst

Biofuels are sustainable fuels produced from modern biomass such as plants and algae. Biodiesel has high lubricity and ultra-low sulfur content. Biodiesel is produced from vegetable oil by transesterification. Actually, practical biodiesel production is limited by the low reaction rate of transesterification of vegetable oil with methanol catalyzed by CaO. Here we designed an efficient catalyst: benzyl bromide-modified CaO. Using benzyl bromide-modified CaO, we obtained a 99.2 % yield of fatty acid methyl esters in 3 h, compared with 35.3 % yield using commercial CaO under the same reaction conditions. The improved catalytic activity is explained by better fat diffusion to the surface of the benzyl bromide-modified CaO. The novelty of our findings is the much higher yield of our method compared to literature data on heterogeneous catalysis. In addition, the lifetime of our catalyst is excellent.     

Do water saving technologies save water? Empirical evidence from North China

This paper describes the extent of water saving technologies usage and evaluates their impacts on water use, water productivity, total irrigated sown area and crop mix in North China. A set of panel data collected at the househol.d and plot levels is used in empirical analysis. Water saving technologies are categorized into traditional technologies, household-based technologies and community-based technologies. By 2007, traditional technologies and household-based technologies are used in almost all sample villages. However, the shares of sown area on which water saving technologies are used are still fairly low. Econometric analysis using plot level fixed effects show that using water saving technologies can reduce crop water use and improve the productivity of water. The positive effects are generated mainly through the use of household-based or community-based technologies. The use of water saving technologies does not have statistically significant impacts on total irrigated sown area and crop mix.     

29 % N2O emission reduction from a modelled low-greenhouse gas cropping system during 2009–2011

Atmospheric concentration of nitrous oxide (N₂O), a greenhouse gas (GHG), is rising largely due to agriculture. At the plot scale, N₂O emissions from crops are known to be controlled by local agricultural practices such as fertilisation, tillage and residue management. However, knowledge of greenhouse gas emissions at the scale of the cropping system is scarce, notably because N₂O monitoring is time consuming. Strategies to reduce impact of farming on climate should therefore be sought at the cropping system level. Agro-ecosystem models are simple alternative means to estimate N₂O emissions. Here, we combined ecosystem modelling and field measurements to assess the effect of agronomic management on N₂O emissions. The model was tested with series of daily to monthly N₂O emission data. It was then used to evaluate the N₂O abatement potential of a low-emission system designed to halve greenhouse gas emissions in comparison with a system with high productivity and environmental performance. We found a 29 % N₂O abatement potential for the low-emission system compared with the high-productivity system. Among N₂O abatement options, reduction in mineral fertiliser inputs was the most effective.     

How well do predators adjust to climate-mediated shifts in prey distribution? A study on Australian water pythons

Climate change can move the spatial location of resources critical for population viability, and a species' resilience to such changes will depend upon its ability to flexibly shift its activities away from no-longer-suitable sites to exploit new opportunities. Intuition suggests that vagile predators should be able to track spatial shifts in prey availability, but our data on water pythons (Liasisfuscus) in tropical Australia suggest a less encouraging scenario. These pythons undergo regular long-range (to >10 kmin) seasonal migrations to follow flooding-induced migrations by their prey (native dusky rats, Rattus colletti). However, when an extreme flooding event virtually eliminated rats for a three-year period, the local pythons did not disperse despite the presence of abundant rats only 8 km away; instead, many pythons starved to death. This inflexibility suggests that some vagile species that track seasonally migrating prey may do so by responding to habitat attributes that have consistently predicted prey availability over evolutionary time, rather than reacting to proximate cues that signal the presence of prey per se. A species' vulnerability to climate change will be increased by an inability to shift its activities away from historical sites toward newly favorable areas.     

Granulation of anammox microorganisms for autotrophic nitrogen removal from wastewater

Excessive discharge of nutrients in waters induces pollution such as such as eutrophication. Conventional methods to treat waters are expensive. Alternatively, anaerobic ammonium oxidation, termed “anammox”, has been recently developped with benefits such as low sludge production, 50% less aeration demand, no external carbon supply, 60% less power consumption, and 90% reduction of greenhouse gas emissions. However, anammox is limited by long start-up periods due to the low growth rate of anammox bacteria. This issue can be solved by complete retention of biomass by reactor modification or by formation of anammox granules. This article reviews the mechanisms of anammox granulation and biogranulation models. We present factors involved in the granulation processes such as hydrodynamic shear force, extracellular polymeric substances, hydraulic retention time, seed sludge and bioreactors. We also discuss the interaction of proteins and polysaccharides in anammox granules.     

Arsenic and chromate removal from water by iron chips—Effects of anions

The purpose of this study is to estimate the removal efficiency of As and Cr (VI) by one kind of industrial waste — iron chips, as well as to estimate the effects of typical inorganic anions (sulfate, phosphate, and nitrate), and typical organic anions (citrate, oxalate, and humate) on As or Cr (VI) removal. The results showed that 98% of As (V) and 92% of As (III) could be removed from aqueous phase by the iron chips within 60 min. Compared with As species, Cr (VI) was removed much more rapidly and efficiently with 97% of Cr (VI) being removed within 25 min. The removal efficiency for arsenic was in the order: As (III) (sulfate), As (III) (nitrate) or As (III), As (III) (humate), As (III) (oxalate), As (III) (citrate), As (III) (phosphate), and for chromate was in the order: Cr (VI) (sulfate), Cr (VI) (phosphate) or Cr (VI) (nitrate) or Cr (VI) (oxalate), Cr (VI), Cr (VI) (citrate), Cr (VI) (humate). In all the treatments, pH level increased with time except for As (III), the removal of which was either without anions or in the presence of humate or nitrate.     

Preliminary toxicity evaluation of water from rice fields using cost‐effective microbiotests

A study was performed in a Protected Area (Natural Reserve of Sado Estuary) in 1996, to evaluate the acute toxicity for aquatic life of surface water from rice fields treated with pesticides, particularly with molinate and quinclorac. As a preliminary assessment, the following rapid toxicity tests were used: “Rotoxkit F”;, “Thamnotoxkit F”; and the recently introduced “Daphtoxkit F magna”; and “Algaltoxkit F”;. Water samples were collected from: a water source for irrigating the rice fields, two rice plots, a drainage channel and from Sado river in which the water is discharged. The results showed that samples from the rice plot treated with molinate were more toxic than those obtained from rice plot treated with quinclorac. Water samples from the river were the most toxic, causing 100% of immobility in all organisms and a substantial inhibition in the algal growth. Water collected from the drainage channel in late July, was also found to be quite toxic. The results obtained until now indicate that some characteristics of these microbiotests, like their rapidity, simplicity and relatively low cost, make them a practical tool to evaluate acute effects of pesticides in freshwater ecosystems. They may also contribute to suggest some changes in pesticides use to promote agricultural practices with lower impact to aquatic life.     

The prevalence of heavy metals in Cladophora glomerata L. from Farahabad Region of Caspian Sea – Iran

The presence of toxic heavy metals in the environment is considered as a risk factor for adverse human and environmental health effects. Farahabad Region is a tourist center in the southern coast of Caspian Sea in Mazandaran Province of Iran. Environmental monitoring of this site is important for public health for individuals visiting and residing in this region. Although numerous biomonitoring data are available globally, very few if any apparent investigations have been conducted in this region. In this study, concentration of three heavy metals chromium (Cr), lead (Pb), and cadmium (Cd) was determined for one year in Cladophora glomerata, the predominant macroalga species present in this region. Detection of heavy metals was performed with atomic absorption spectrophotometer using standard methods. Results showed that the range of Cr metal in various algal samples was 29–55 ppm/g dry weight. The levels of Pb in algal samples (Cladophora) ranged from 2 to 8 ppm/g dry weight. The Cd concentrations in C. glomerata biomass ranged from 1.5 to 8.2 ppm/g dry biomass. In view of potential threats of such high metal concentrations in coastal waters and in algal tissues, it is necessary to adopt conservation measures to ensure public health safety.     

Up to 95 % reduction of chemical oxygen demand of slaughterhouse effluents using Fenton and photo-Fenton oxidation

Meat industries produce effluents containing high concentrations of organic and inorganic compounds, which must be removed before being discharged or reused. Advanced oxidation processes using Fenton reaction coupled with UV, solar radiation, and electrochemical oxidation are promising methods. Here, we treated the effluent from an anaerobic digester using: (a) the photoelectro-Fenton process, using a system with a Ti-RuO₂ anode and a carbon felt cathode, (b) the solar photo-Fenton process, using a batch reactor and a compound parabolic collector, and (c) a combination of Fenton and solar photo-Fenton processes. The effluent had an initial chemical oxygen demand (COD) of 1159 mgL^?1, and we obtained high removal efficiencies of COD, up to 95 %, using the combination of Fenton and solar photo-Fenton processes.     

Fast 62–92 % yield preparation of amino acid dithiocarbamates in green solvent at room temperature

Dithiocarbamate and their derivatives are of importance in medicinal chemistry due to their biological activities, in agriculture as fungicides and in organic synthesis as versatile synthetic intermediates. Green solvents such as deep eutectic solvents and polyethylene glycol are new emerging alternatives to conventional harmful organic solvents. Here, we report the synthesis of amino acid–based dithiocarbamates by one-pot three-component reaction of the electrophilic reagent, carbon disulfide and α-amino acids in deep eutectic solvent and polyethylene glycol as a catalyst and reaction media. In situ preparation of dithiocarbamates by the reaction of different amino acids and carbon disulfide, followed by addition reaction with epoxides, alkyl halides and α, β-unsaturated enones at room temperature, gave the corresponding products in 62–92 % yield with a short reaction time without any tedious workup procedures. The deep eutectic solvents and polyethylene glycol were recycled without activity or yield decrease. Therefore, the synthesis of amino acid–based dithiocarbamates in green solvents is a promising alternative to previously used procedures.     

Mitochondrial toxicity and in vitro biological effects of ambient PM2.5 from an urban site in China

Abstract

The roles of PM_2.5-induced mitochondrial damage and oxidative stress on mast cell degranulation were examined in vitro. Mast cells were treated with suspensions of PM_2.5 in Dulbecco’s modified Eagle’s medium at concentrations from 25 to 200?mg/L in the absence or presence of 10?mmol/L N-acetyl-L-cysteine. Biological effects and mitochondrial function were assessed by determining cell viability, β-hexosaminidase release, interleukin-4 secretion, reactive oxygen species generation, adenosine triphosphate production, potential alteration of mitochondrial membrane, and activities of mitochondrial electron transport chain complexes I and III. Exposure of mast cells to PM_2.5 induced reduction of adenosine triphosphate production, collapse of mitochondrial membrane potential, and inhibition of the activity of complex III. Co-treatment of mast cells exposed to PM_2.5 with N-acetyl-L-cysteine attenuated cytotoxicity and the production of reactive oxygen species, and decreased the release of β-hexosaminidase and interleukin-4. Evidently, PM_2.5-induced oxidative stress plays an essential role in mitochondrial toxicity and mast cell activation.     

Respiration and lipid content of the Arctic copepod<Emphasis Type="Italic"> Calanus hyperboreus</Emphasis> overwintering 1 m above the seafloor at 2,300 m water depth in the Fram Strait

In August 2000 high concentrations of the dominant herbivorous copepod Calanus hyperboreus were detected in the Arctic Fram Strait, west of Spitsbergen, 1 m above the seafloor at 2,290 m water depth. Individuals from that layer were sampled by a hyper-benthic net attached to the frame of an epi-benthic sledge. For comparison, the vertical distribution of C. hyperboreus in the water column was studied simultaneously by a multiple opening/closing net haul from 2,250 m depth to the surface. Maximum abundance was found close to the surface with 6.6 and 10.0 ind. m^?3 at 0–50 m and 50–100 m depth, respectively. However, the major fraction of the population (>40%) occurred between 1,000 and 1,500 m depth. In the deepest layer (2,000–2,250 m) abundance measured 2.2 ind. m^?3 and was twice as high as between 100 and 1,000 m depth. In comparison to individuals from surface waters, copepods from the hyper-benthic layer were torpid and did not react to mechanical stimuli. Stage CV copepodids and females from the deep sample contained 4–10% less lipid and showed significantly reduced respiration rates of 0.24 and 0.26 ml O₂ h^?1 g^?1 dry mass (DM) as compared to surface samples (0.49 and 0.43 ml O₂ h^?1 g^?1 DM). All these observations indicate that the hyper-benthic part of the population had already started a dormant overwintering phase at great depth. Based on the lipid deposits and energy demands, the potential maximum duration of the non-feeding dormant phase was estimated at 76–110 days for females and at 98–137 days for CV copepodids, depending on what indispensable minimum lipid content was assumed. In any case, the estimated times could not meet the necessary requirements for a starvation period of >6 months until the next phytoplankton bloom in the following spring. The ecological implications of these results are discussed with respect to the life cycle and eco-physiological adaptations of C. hyperboreus to its high-Arctic habitat.     

What are the strengths and limitations of direct and indirect assessment of dispersal? Insights from a long-term field study in a group-living bird species

Molecular methods of assessing dispersal have become increasingly powerful and have superseded direct methods of studying dispersal. Although now less popular, direct methods of studying dispersal remain important tools for understanding the evolution of dispersal. Here, we use data from Siberian jays Perisoreus infaustus, a group-living bird species, to compare natal dispersal distances and rates using visual mark–recapture, radio-tracking and microsatellite data. Siberian jays have bimodal natal dispersal timing; socially dominant offspring remain with their parents for up to 5 years (delayed dispersers), while they force their subordinate brood mates to leave the parental territory at independence (early dispersers). Early dispersers moved about 9,000 m (visual mark–recapture, radio-tracking) before settling in a group as a non-breeder. In contrast, delayed dispersers moved about 1,250 m (visual mark–recapture only) and mainly moved to a breeding opening. Dispersal distances were greater in managed habitat compared to natural habitat for both early and delayed dispersers. Molecular estimates based on 23 microsatellite loci and geographical locations supported distance estimates from the direct methods. Our study shows that molecular methods are at least 22 times cheaper than direct methods and match estimates of dispersal distance from direct methods. However, molecular estimates do not give insight into the behavioural mechanisms behind dispersal decisions. Thus, to understand the evolution of dispersal, it is important to combine direct and indirect methods, which will give insights into the behavioural processes affecting dispersal decisions, allowing proximate dispersal decisions to be linked to the ultimate consequences thereof.     

Identification and assessment of water pollution as a consequence of a leachate plume migration from a municipal landfill site (Tucumán,Argentina)

Landfills constitute potential sources of different pollutants that could generate human health and environmental problems. While some landfills currently work under the protection of a bottom liner with leachate collection, it was demonstrated that migration could take place even yet with these cautions. The purpose of this paper is to assess the pollution caused by a leachate plume from a municipal landfill that is affecting both groundwater and surface waters. The research was carried out at Pacará Pintado landfill in northwestern Argentina. Analysis of water samples indicates that leachate is affecting groundwater under the landfill area and an abandoned river channel hydraulically connected. In the center of the landfill area, the plume is anoxic and sulfate, nitrate, iron and manganese reduction zones were identified. Leachate plume presented high concentration of organic matter, Fe, Mn, NH₄ ⁺, Cl^? and Cr reaching an extension of 900 m. The presence of a leachate plume in a landfill site with a single liner system implies that the use of this groundwater pollution control method alone is not enough especially if permeable sediments are present below.     

Synthesis of butyl butyrate in 93 % yield by <Emphasis Type="Italic">Thermomyces lanuginosus</Emphasis> lipase on waste eggshells

There is a high demand for immobilized enzymes in the industry because it is a green technology, it improves the efficiency of the crude enzyme and it minimizes the step of product recovery. Selection of a suitable carrier for enzyme immobilization is crucial. Eggshells are abundantly available as an organic waste. Here, lipase from Thermomyces lanuginosus was immobilized on eggshell to produce butyl butyrate. We evaluated the effect of lipase loading, from 0.5 to 3.0 %, size of eggshells, lower than 1, 1–2 and 2–4 mm, and temperature, from 30 to 50 °C. Results show that the optimum conditions calculated by response surface methodology analysis for butyl butyrate synthesis were 40 % w/v of immobilized lipase loading and 0.2 M of substrate concentration at 38 °C during 24 h. The predicted yield was 92.78 %, and the yield obtained during synthesis was 93.48 %.     

Polymeric microspheres with <Emphasis Type=Italic>N</Emphasis>-methyl-<Emphasis Type=SmallCaps>d</Emphasis>-glucamine ligands for boron removal from water solution by adsorption–membrane filtration process

Polymeric microspheres with N-methyl-d-glucamine (NMDG) ligands have been tested in the adsorption–membrane filtration process for boron removal from aqueous solutions. The chelating resins were synthesized by reacting NMDG with the vinylbenzyl chloride–styrene–1,4-divinylbenzene (VBC/S/DVB) copolymer at the reflux temperature and in the microwave reactor. VBC/S/DVB spheres with a gel structure that contained 6 wt% DVB were obtained by membrane emulsification followed by suspension polymerization. By selecting the optimal emulsification and polymerization parameters, it was possible to obtain 25-μm-diameter particles with a narrow size distribution. Resins obtained by microwave modification showed the higher boron adsorption capacity.