Responses of two birch (Betula pendula Roth) clones to different ozone profiles with similar AOT40 exposure

Saplings of two clones of European white birch (Betula pendula Roth) were exposed to three different ozone profiles resulting in same AOT40 value of 13–14 ppm h in a chamber experiment. The sensitive clone 5 and the more tolerant clone 2 were growing (1) under filtered air (=control), or (2) were exposed to 70 ppb ozone for 24 h d⁻¹ (=profile 1), (3) to 100 ppb ozone for 12 h d⁻¹ at 8:00–20:00 (=profile 2), or (4) to 200 ppb ozone for 4.5 h d⁻¹ at 9:30–14:00 (=profile 3) for 20 d. The saplings were determined for growth, visible leaf injuries, stomatal conductance, and concentrations of Rubisco, chlorophyll and carotenoids. Growth responses and induction of visible foliar injuries under different ozone profiles were variable, resulting in 4–17% lower dry mass of shoot, 16–46% reduction in stem height increment and 11–43% increase in visible injuries in clone 5, which was accompanied by higher leaf turnover rate under profile 3 indicating compensation growth. In clone 2, ozone-induced responses ranged from slight stimulation in stem height growth to 13% decrease in dry mass of shoot and 2–16% increase in visible injuries. Daytime stomatal conductance rates were lowered by 14–54% in clone 5 and 9–74% in clone 2, depending on profile. The additional power-weighted analyses revealed that high peak concentrations and exposure shape were important for induction of visible injuries in both clones and reduction in stomatal conductance in clone 5, whereas growth reductions were rather related to total cumulative exposure. The results indicate that profile of ozone exposure, night-time stomatal conductance (24 h flux), and recovery time for defence and compensations reactions should not be ignored in plant response and ozone flux modelling.     

Ozone risk assessment for agricultural crops in Europe: Further development of stomatal flux and flux–response relationships for European wheat and potato

Applications of a parameterised Jarvis-type multiplicative stomatal conductance model with data collated from open-top chamber experiments on field grown wheat and potato were used to derive relationships between relative yield and stomatal ozone uptake. The relationships were based on thirteen experiments from four European countries for wheat and seven experiments from four European countries for potato. The parameterisation of the conductance model was based both on an extensive literature review and primary data. Application of the stomatal conductance models to the open-top chamber experiments resulted in improved linear regressions between relative yield and ozone uptake compared to earlier stomatal conductance models, both for wheat (r²=0.83) and potato (r²=0.76). The improvement was largest for potato. The relationships with the highest correlation were obtained using a stomatal ozone flux threshold. For both wheat and potato the best performing exposure index was AF_st6 (accumulated stomatal flux of ozone above a flux rate threshold of 6 nmol ozone m⁻² projected sunlit leaf area, based on hourly values of ozone flux). The results demonstrate that flux-based models are now sufficiently well calibrated to be used with confidence to predict the effects of ozone on yield loss of major arable crops across Europe. Further studies, using innovations in stomatal conductance modelling and plant exposure experimentation, are needed if these models are to be further improved.     

Ozone uptake by citrus trees exposed to a range of ozone concentrations

The Citrus genus includes a large number of species and varieties widely cultivated in the Central Valley of California and in many other countries having similar Mediterranean climates. In the summer, orchards in California experience high levels of tropospheric ozone, formed by reactions of volatile organic compounds (VOC) with oxides of nitrogen (NO_x). Citrus trees may improve air quality in the orchard environment by taking up ozone through stomatal and non-stomatal mechanisms, but they may ultimately be detrimental to regional air quality by emitting biogenic VOC (BVOC) that oxidize to form ozone and secondary organic aerosol downwind of the site of emission. BVOC also play a key role in removing ozone through gas-phase chemical reactions in the intercellular spaces of the leaves and in ambient air outside the plants. Ozone is known to oxidize leaf tissues after entering stomata, resulting in decreased carbon assimilation and crop yield. To characterize ozone deposition and BVOC emissions for lemon (Citrus limon), mandarin (Citrus reticulata), and orange (Citrus sinensis), we designed branch enclosures that allowed direct measurement of fluxes under different physiological conditions in a controlled greenhouse environment. Average ozone uptake was up to 11 nmol s^?1 m^?2 of leaf. At low concentrations of ozone (40 ppb), measured ozone deposition was higher than expected ozone deposition modeled on the basis of stomatal aperture and ozone concentration. Our results were in better agreement with modeled values when we included non-stomatal ozone loss by reaction with gas-phase BVOC emitted from the citrus plants. At high ozone concentrations (160 ppb), the measured ozone deposition was lower than modeled, and we speculate that this indicates ozone accumulation in the leaf mesophyll.     

Contribution of isoprene to formaldehyde and ozone formation based on its oxidation products measurement in Beijing,China

The atmospheric mixing ratios of methacrolein (MACR) and methyl vinyl ketone (MVK), the two specific products from isoprene oxidation in the atmosphere, were measured in Beijing from March to November, 2006. Distinct amounts of MACR and MVK were detected during vegetable growing seasons from April to October with ambient levels of 0.11–0.67 ppbv and 0.19–1.36 ppbv, respectively. The reacted isoprene and its ozone formation potentials (OFPs) in Beijing were evaluated in the range of 0.49–3.46 ppbv and 6.4–44.7 ppbv, respectively, from April to October. OFP of the reacted isoprene accounted for 10.6–23.6% of the total OFPs of VOCs (including carbonyls and isoprene) and 6.38–29.9% of the photo-chemically produced ozone. The maximum OFP of the original emitted isoprene prior to its photo-oxidation was calculated as 56.0 ppbv in August. The contribution from the reacted isoprene in Beijing to HCHO formation was also estimated to be in the range of 0.35–2.45 ppbv from April to October, which accounted for 4.6–11.5% of ambient HCHO.     

Sensitivity of ozone to summertime climate in the eastern USA: A modeling case study

The goal of this modeling study is to determine how concentrations of ozone respond to changes in climate over the eastern USA. The sensitivities of average ozone concentrations to temperature, wind speed, absolute humidity, mixing height, cloud liquid water content and optical depth, cloudy area, precipitation rate, and precipitating area extent are investigated individually. The simulation period consists of July 12–21, 2001, during which an ozone episode occurred over the Southeast. The ozone metrics used include daily maximum 8 h average O₃ concentration and number of grid cells exceeding the US EPA ambient air-quality standard. The meteorological factor that had the largest impact on both ozone metrics was temperature, which increased daily maximum 8 h average O₃ by 0.34 ppb K⁻¹ on average over the simulation domain. Absolute humidity had a smaller but appreciable effect on daily maximum 8 h average O₃ (−0.025 ppb for each percent increase in absolute humidity). While domain-average responses to changes in wind speed, mixing height, cloud liquid water content, and optical depth were rather small, these factors did have appreciable local effects in many areas. Temperature also had the largest effect on air-quality standard exceedances; a 2.5 K temperature increase led to a 30% increase in the area exceeding the EPA standard. Wind speed and mixing height also had appreciable effects on ozone air-quality standard exceedances.     

Evidence of impact of aerosols on surface ozone concentration in Tianjin,China

In this study, we will present evidence that aerosol particles have strong effects on the surface ozone concentration in a highly polluted city in China. The measured aerosol (PM10), UV flux, and O₃ concentrations were analyzed from 1 November (1 Nov) to 7 November (7 Nov) 2005 in Tianjin, China. During this period, the aerosol concentration had a strong day-by-day variation, ranging from 0.2 to 0.6 mg m⁻³. The ozone concentration also shows a strong variability in correlation with the aerosol concentration. During 1 Nov, 2 Nov, 6 Nov, and 7 Nov, the ozone concentration was relatively high (about 30–35 ppbv; defined as a high-ozone period), and during 3 Nov to 5 Nov, the ozone concentration was relatively low (about 5–20 ppbv; defined as a low-ozone period). The analysis of the measurement shows that the ozone concentration is strongly correlated to the measured UV flux. Because there were near cloud-free conditions between 1 Nov and 7 Nov, the variation of the UV flux mainly resulted from the variation of aerosol concentration. The result shows that higher aerosol concentrations produce a lower UV flux and lower ozone concentrations. By contrast, the lower aerosol concentration leads to a higher UV flux and higher ozone concentrations. A chemical mechanism model (NCAR MM) is applied to interpret the measurement. The model result shows that the extremely high aerosol concentration in this polluted city has a very strong impact on photochemical activities and ozone formation. The correlation between aerosol and ozone concentrations appears in a non-linear feature. The O₃ concentration is very sensitive to aerosol loading when aerosol loading is high, and this sensitivity is reduced when aerosol loading is low. For example, the ratio of Δ[O₃]/Δ[AOD] is about −16 ppbv AOD⁻¹ when AOD is less than 2, and is only −4 ppbv AOD⁻¹ when AOD is between 2 and 5. This result implies that a future decrease in aerosol loading could lead to a rapid increase in the O₃ concentration in this region.     

Impact of large scale circulation on European summer surface ozone and consequences for modelling forecast

In this study, we investigate the benefit for European ozone simulation of using day-to-day varying chemical boundary conditions produced by a global chemical weather forecast platform instead of climatological monthly means at the frontiers of a regional model. We performed two simulations over Europe using the regional (0.5 × 0.5°) CHIMERE CTM forced by global scale simulations based on the LMDz-INCA CTM. For summer 2005, ozone differences exceeding 20 ppb can be punctually found between these two simulations in the borders of the domain. The mean of the differences ranges between 0 and 3 ppb beyond 15° of the frontiers of the regional model.Correlations with ground-based ozone measurements at more than 400 stations are slightly increased by the use of daily boundary conditions. The simulation of the temporal variability is significantly enhanced in particular for the daily means and daily maxima. As expected, the gain is higher at the borders of the regional domain.The change of percentile distribution shows that the net impact of high temporal resolution boundary conditions is not of major concern for surface ozone peaks which are mainly due to local photochemistry. The use of daily boundary conditions is however necessary to correctly simulate concentrations in the 20–35 ppb range which are of crucial interest for human and vegetation exposure effects.     

Measurement and analysis of atmospheric concentrations of isoprene and its reaction products in central Texas

A field experiment was conducted in August 1998 to investigate the concentrations of isoprene and isoprene reaction products in the surface and mixed layers of the atmosphere in Central Texas. Measured near ground-level concentrations of isoprene ranged from 0.3 (lower limit of detection – LLD) to 10.2 ppbv in rural regions and from 0.3 to 6.0 ppbv in the Austin urban area. Rural ambient formaldehyde levels ranged from 0.4 ppbv (LLD) to 20.0 ppbv for 160 rural samples collected, while the observed range was smaller at Austin (0.4–3.4 ppbv) for a smaller set of samples (37 urban samples collected). Methacrolein levels did not vary as widely, with rural measurements from 0.1 ppbv (LLD) to 3.7 ppbv and urban concentrations varying between 0.2 and 5.7 ppbv. Isoprene flux measurements, calculated using a simple box model and measured mixed-layer isoprene concentrations, were in reasonable agreement with emission estimates based on local ground cover data. Ozone formation attributable to biogenic hydrocarbon oxidation was also calculated. The calculations indicated that if the ozone formation occurred at low VOC/NO_x ratios, up to 20 ppbv of ozone formed could be attributable to biogenic photooxidation. In contrast, if the biogenic hydrocarbon reaction products were formed under low NO_x conditions, ozone production attributable to biogenics oxidation would be as low as 1 ppbv. This variability in ozone formation potentials implies that biogenic emissions in rural areas will not lead to peak ozone levels in the absence of transport of NO_x from urban centers or large rural NO_x sources.     

Carbonyl sulfide exchange on an ecosystem scale: soil represents a dominant sink for atmospheric COS

The soil/plant/atmosphere exchange of carbonyl sulfide (COS) was investigated in an open oak woodland ecosystem at a rural site in northern California. Measurements of atmospheric concentrations of COS were made in June and in December 1994. We found a significant diel cycle with a drop of COS levels by approximately 150 ppt during the night in both seasons. The mean COS daytime background mixing ratios showed a distinct seasonal difference with 465±77 ppt in summer and 375±56 ppt in winter. The nighttime bulk COS flux into the ecosystem was estimated using a micrometeorological model. To address the observed depletion of COS during stable nocturnal boundary layer conditions, the potential of various ecosystem compartments to act as a sink for COS was investigated. Studies using dynamic enclosures flushed with ambient air excluded vegetation as an important sink during nighttime due to high stomatal resistance. Results from soil chamber measurements indicate that the soil can act as a dominant sink for atmospheric COS.     

The impact of an 8 h ozone air quality standard on ROG and NOx controls in Southern California

The new National Ambient Air Quality Standard for ozone in the US uses 8 h averaging for the concentration. Based on the 1993 ambient data for Southern California, 8 h averaging has a moderate tendency to move the location of the peak ozone concentration east of the location of the peak 1 h ozone concentration. Reducing the area-wide peak 8 h ozone concentration to 80 ppb would require an effective reduction of the area-wide peak 1 h ozone concentration to around 90 ppb. The Urban Airshed Model with improved numerical solvers, meteorological input based on a mesoscale model and an adjusted emissions inventory was used to study the effect of reactive organic gases (ROG) and NO_x controls on daily-maximum and peak 8 h ozone concentrations under the 26–28 August 1987 ozone episodic conditions in Southern California. The NO_x disbenefit remains prominent for the case of 8 h ozone concentration but is somewhat less prominent, especially when areal ozone exposure is considered, than the case for 1 h ozone concentration. The role of two indicators – O₃/NO_y and H₂O₂/HNO₃ – for NO_x- and ROG-sensitivity for 1 and 8 h ozone concentrations were also studied. In general, the indicator trends are consistent with model predictions, but the discriminating power of the indicators is rather limited.     

Vegetation exposure to ozone over the continental United States: Assessment of exposure indices by the Eta-CMAQ air quality forecast model

The main use of air quality forecast (AQF) models is to predict ozone (O₃) exceedances of the primary O₃ standard for informing the public of potential health concerns. This study presents the first evaluation of the performance of the Eta-CMAQ air quality forecast model to predict a variety of widely used seasonal mean and cumulative O₃ exposure indices associated with vegetation using the U.S. AIRNow O₃ observations. These exposure indices include two concentration-based O₃ indices, M7 and M12 (the seasonal means of daytime 7-h and 12-h O₃ concentrations, respectively), and three cumulative exposure-based indices, SUM06 (the sum of all hourly O₃ concentrations ≥ 0.06 ppm), W126 (hourly concentrations weighed by a sigmoidal weighting function), and AOT40 (O₃ concentrations accumulated over a threshold of 40 ppb during daylight hours). During a three-month simulation (July–September 2005), the model over predicted the M7 and M12 values by 8–9 ppb, or a NMB value of 19% and a NME value of 21%. The model predicts a central belt of high O₃ extending from Southern California to Middle Atlantic where the seasonal means, M7 and M12 (the seasonal means of daytime 7-h and 12-h O₃ concentrations), are higher than 50 ppbv. In contrast, the model is less capable of reproducing the observed cumulative indices. For AOT40, SUM06 and W126, the NMB and NME values are two- to three-fold of that for M7, M12 or peak 8-h O₃ concentrations. The AOT40 values range from 2 to 33 ppm h by the model and from 1 to 40 ppm h by the monitors. There is a significantly higher AOT40 value experienced in the United States in comparison to Europe. The domain-wide mean SUM06 value is 14.4 ppm h, which is about 30% higher than W126, and 40% higher than AOT40 calculated from the same 3-month hourly O₃ data. This suggests that SUM06 and W126 represent a more stringent standard than AOT40 if either the SUM06 or the W126 was used as a secondary O₃ standard. Although CMAQ considerably over predicts SUM06 and W126 values at the low end, the model under predicts the extreme high exposure values (>50 ppm h). Most of these extreme high values are found at inland California sites. Based on our analysis, further improvement of the model is needed to better capture cumulative exposure indices.     

Surface ozone and NOx concentrations at a high altitude Mediterranean site,Greece

Ozone was measured in six- and NO_x in five sampling periods in 1996–97, mostly during summer, at a 1070 m altitude site in northern Peloponnese. Mean values in each sampling period ranged from 43–48 ppb exceeding the European Union 24 h plant protection standard. The background ozone concentration of 43 ppb derived from the correlation of ozone with NO^′_x also exceeded the EU plant protection standard. Ozone exhibited maxima in the afternoon and minima during the night; in certain 24–48 h periods, however, the ozone concentrations remained practically constant; in these short periods air mass back trajectories indicated air masses which originated in north Africa. NO^′_x concentrations had maximum of 24 h around noon. Their mean concentrations ranged from 0.5–0.7 ppb, smaller than respective concentrations in north-central Europe.     

Demonstrating attainment in Atlanta using urban airshed model simulations: impact of boundary conditions and alternative forms of the NAAQS

Urban Airshed Model-Version IV (UAM-IV) simulations on 7–8 July, 1988 for the Atlanta, Georgia, nonattainment area are used to investigate how recent changes in the National Ambient Air Quality Standard (NAAQS) and changes in boundary concentrations may affect attempts to comply with the standard through local emissions reductions. According to model results, the recently promulgated 8 h NAAQS at a level of 0.08 ppmv will require larger emission reductions to comply with the standard than those that are necessary to comply with the previous 1 h/0.12 ppmv NAAQS. Regardless of the form of the NAAQS or the magnitude of the concentrations of O₃ and its precursors at the model domain boundary, UAM-IV simulations for Atlanta predict that NO_x (NO+NO₂) emission reductions are more effective than volatile organic compound reductions in mitigating O₃ pollution. Moreover, the simulations indicate that NO_x emission reductions greater than 60–75% would be required to demonstrate attainment under either form of the standard, even if boundary concentrations of O₃ and its precursors were substantially reduced. Further research is necessary to determine if this weak response to emission controls is truly representative of the real atmosphere, or is a result of the meteorological conditions specific to this episode, or is an artifact of the UAM-IV model or its inputs.     

Peroxyacetyl nitrate and peroxypropionyl nitrate in Porto Alegre,Brazil

For 41 days between 25 May 1996 and 27 March 1997, peroxyacetyl nitrate (PAN) and peroxypropionyl nitrate (PPN) have been measured by electron capture gas chromatography at Santa Rita near Porto Alegre, RS, Brazil, where light-duty vehicles used either ethanol or a gasoline–MTBE blend. Daily maximum concentrations ranged from 0.19 to 6.67 ppb for PAN and 0.06 to 0.72 ppb for PPN. Linear regression of maximum PPN vs. maximum PAN yielded a slope of 0.105±0.004 (R²=0.974). Diurnal variations of ambient PAN often followed those of ozone with respect to time of day but not with respect to amplitude. This was reflected in the large relative standard deviations associated with the study-averaged PAN/ozone concentration ratio, 0.037±0.105 (ppb/ppb, n=789) and the maximum PAN/maximum ozone concentration ratio, 0.028±0.015 (ppb/ppb, range 0.005–0.078, n=41). On several days PAN accounted for large fractions of the total ambient NO_x in the late morning and afternoon hours, e.g., PAN/NO_x⩽0.58 and PAN/(NO_x–NO) ⩽0.76 on 27 March 1997. The amount of PAN lost by thermal decomposition (TPAN) was comparable in magnitude to that present in ambient air. The ratios TPAN/(PAN+TPAN) were up to 0.53, 0.67 and 0.64 during the warm afternoons of 25, 26 and 27 March 1997, respectively. The highest calculated value of TPAN was 5.6 ppb on 27 March 1997. On that day the 24 h-averaged value of TPAN (1.01 ppb) was nearly the same as that of PAN (1.09 ppb). Using computer kinetic modeling (SAPRC 97 chemical mechanism) and sensitivity analysis of VOC incremental reactivity, we ranked VOC present in Porto Alegre ambient air for their importance as precursors to PAN and to PPN. Using as input data the averages of VOC concentrations measured in downtown Porto Alegre during the ca. 1 yr period March 1996–April 1997, we calculated that the most important precursors to PAN and PPN were the SAPRC 97 model species ARO2 (which includes the aromatics xylenes, trimethylbenzenes, ethyltoluenes, etc.), which accounted for ca. 17% of the total PAN and total PPN formation potentials. Overall, the results indicate a major role for aromatics and alkenes and a minor role for acetaldehyde and ethanol as precursors to peroxyacyl nitrates in the Porto Alegre urban area.     

Characteristics of mercury exchange flux between soil and air in the heavily air-polluted area,eastern Guizhou,China

To investigate the characteristics of mercury exchange between soil and air in the heavily air-polluted area, total gaseous mercury (TGM) concentration in air and Hg exchange flux were measured in Wanshan Hg mining area (WMMA) in November, 2002 and July–August, 2004. The results showed that the average TGM concentrations in the ambient air (17.8–1101.8 ng m⁻³), average Hg emission flux (162–27827 ng m⁻² h⁻¹) and average Hg dry deposition flux (0–9434 ng m⁻² h⁻¹) in WMMA were 1–4 orders of magnitude higher than those in the background area. It is said that mercury-enriched soil is a significant Hg source of the atmosphere in WMMA. It was also found that widely distributed roasted cinnabar banks are net Hg sources of the atmosphere in WMMA. Relationships between mercury exchange flux and environmental parameters were investigated. The results indicated that the rate of mercury emission from soil could be accelerated by high total soil mercury concentration and solar irradiation. Whereas, highly elevated TGM concentrations in the ambient air can restrain Hg emission from soil and even lead to strongly atmospheric Hg deposition to soil surface. A great amount of gaseous mercury in the heavily polluted atmosphere may cycle between soil and air quickly and locally. Vegetation can inhibit mercury emission from soil and are important sinks of atmospheric mercury in heavily air-polluted area.     

Nitrogen oxide fluxes between corn (Zea mays L.) leaves and the atmosphere

In the United States, fertilized corn fields, which make up approximately 5% of the total land area, account for approximately 45% of total soil NO_x emissions. Leaf chamber measurements were conducted of NO and NO₂ fluxes between individual corn leaves and the atmosphere in (1) field-grown plants near Champaign, IL (USA) in order to assess the potential role of corn canopies in mitigating soil–NO_x emissions to the atmosphere, and (2) greenhouse-grown plants in order to study the influence of various environmental variables and physiological factors on the dynamics of NO₂ flux. In field-grown plants, fluxes of NO were small and inconsistent from plant to plant. At ambient NO concentrations between 0.1 and 0.3 ppbv, average fluxes were zero. At ambient NO concentrations above 1 ppbv, NO uptake occurred, but fluxes were so small (14.3±0.0 pmol m⁻² s⁻¹) as to be insignificant in the NO_x inventory for this site. In field-grown plants, NO₂ was emitted to the atmosphere at ambient NO₂ concentrations below 0.9 ppbv (the NO₂ compensation point), with the highest rate of emission being 50 pmol m⁻² s⁻¹ at 0.2 ppbv. NO₂ was assimilated by corn leaves at ambient NO₂ concentrations above 0.9 ppbv, with the maximum observed uptake rate being 643 pmol m⁻² s⁻¹ at 6 ppbv. When fluxes above 0.9 ppbv are standardized for ambient NO₂ concentration, the resultant deposition velocity was 1.2±0.1 mm s⁻¹. When scaled to the entire corn canopy, NO₂ uptake rates can be estimated to be as much as 27% of the soil-emitted NO_x. In greenhouse-grown and field-grown leaves, NO₂ deposition velocity was dependent on incident photosynthetic photon flux density (PPFD; 400–700 nm), whether measured above or below the NO₂ compensation point. The shape of the PPFD dependence, and its response to ambient humidity in an experiment with greenhouse-grown plants, led to the conclusion that stomatal conductance is a primary determinant of the PPFD response. However, in field-grown leaves, measured NO₂ deposition velocities were always lower than those predicted by a model solely dependent on stomatal conductance. It is concluded that NO₂ uptake rate is highest when N availability is highest, not when the leaf deficit for N is highest. It is also concluded that the primary limitations to leaf-level NO₂ uptake concern both stomatal and mesophyll components.     

Application of ozone for the removal of bisphenol A from water and wastewater – A review

The extensive use of Bisphenol A (BPA) in the plastics industry has led to increasing reports of its presence in the aquatic environment, with concentrations of ng L^?1 to μg L^?1. Various advanced oxidation processes, including ozonation, have been shown to effectively degrade BPA. This paper reviews the current advancements in using ozone to remove BPA from water and wastewater.Most of the published work on the oxidation of BPA by ozone has focused on the efficiency of BPA removal in terms of the disappearance of BPA, and the effect of various operational parameters such as ozone feed rate, contact time and pH; some information is available on the estrogenic activity of the treated water. Due to increasing operational reliability and cost effectiveness, there is great potential for industrial scale application of ozone for the treatment of BPA. However, there is a significant lack of information on the formation of oxidation by-products and their toxicities, particularly in more complex matrices such as wastewater, and further investigation is needed for a better understanding of the environmental fate of BPA.     

Ethanol emission from loose corn silage and exposed silage particles

Silage on dairy farms has been identified as a major source of volatile organic compound (VOC) emissions. However, rates of VOC emission from silage are not accurately known. In this work, we measured ethanol (a dominant silage VOC) emission from loose corn silage and exposed corn silage particles using wind tunnel systems. Flux of ethanol was highest immediately after exposing loose silage samples to moving air (as high as 220 g m^?2 h^?1) and declined by as much as 76-fold over 12 h as ethanol was depleted from samples. Emission rate and cumulative 12 h emission increased with temperature, silage permeability, exposed surface area, and air velocity over silage samples. These responses suggest that VOC emission from silage on farms is sensitive to climate and management practices. Ethanol emission rates from loose silage were generally higher than previous estimates of total VOC emission rates from silage and mixed feed. For 15 cm deep loose samples, mean cumulative emission was as high as 170 g m^?2 (80% of initial ethanol mass) after 12 h of exposure to an air velocity of 5 m s^?1. Emission rates measured with an emission isolation flux chamber were lower than rates measured in a wind tunnel and in an open setting. Results show that the US EPA emission isolation flux chamber method is not appropriate for estimating VOC emission rates from silage in the field.     

Factors determining the robustness of AOT40 and other ozone exposure indices

The robustness problem is considered for mathematical indices that describe the adverse effects of vegetation exposure to ozone. It is shown that some of them may demonstrate infinitely high sensitivity of the exposure estimate to small variations of ozone concentrations or internal parameters of specific functional. In particular, for the accumulated exposure over a threshold of 40 ppb (AOT40) index such conditions are not extraordinary, but rather describe quite often situations in remote areas in Northern Europe. Taking into account inevitable uncertainties in both calculated and observed ozone concentrations, a high sensitivity of ozone impact indices results in an instability of the exposure estimates and creates problems in their use. Theoretical consideration of the problem enabled to formulate the necessary and sufficient conditions for the limited sensitivity of a time-integrating index. An example of a modified AOT formulation fulfilling the obtained criteria and hence not experiencing the sensitivity problem is considered.     

Ground-level ozone and ozone vertical profile measurements close to the foothills of the Guadarrama mountain range (Spain)

Continuous measurements of ozone vertical profiles, OVP, in the low troposphere (around 500–2400 m) using an unattended commercial ozone profiler DIAL, were conducted during June–July 2004 in Segovia, SG, a small city in the upper plateau located close to the foothills of the Guadarrama mountain range, Guadarrama, in the Central Massif. The data obtained over almost 37 complete days have enabled us to characterise the ozone vertical exchange, describe the phenomenology of the main ozone peaks, OP, recorded in the city and their relationship with ozone transport/formation from the gas precursor emissions of the greater Madrid area across Guadarrama. To achieve the last objective concurrent measurements of ground-level ozone in SG and a representative monitoring station upwind from Guadarrama, Buitrago de Lozoya, BL, have been used. 72.2% of the concurrent maximum diurnal ozone peaks exceeding the 95 percentile hourly value in SG (OPSG) and BL (OPBL) were linked to ozone transport and formation from the greater Madrid area towards Guadarrama. An estimate of the contribution of the greater Madrid area on OPSG yielded 28 μg m⁻³.The most prominent ozone vertical stratification was linked to the mixing height, MH, and a frequent nocturnal stable layer formed, NSL. Three small ozone enriched-layers were identified at mean heights of 500, 700 and 1000 m, respectively. Ozone tended to decline versus altitude. The hourly patterns of the three layers showed two peak occurrences of similar amplitude in the early morning, 7–8 h, and mid-afternoon, 14–16 h. A minimum was also observed during daytime, 10–11 h, its origin being attributed to a dilution process induced by the “chimney effect” caused by the slopes heating during this period.The comparison between OPSG, and the maximum diurnal ozone peaks in the first layer, OL1P, showed a satisfactory relationship, correlation coefficient, r, of the linear fit 0.77, and comparable mean values, 127 and 130 μg m⁻³, respectively, revealing the presence of an uniform ozone vertical distribution in the 500 m atmospheric layer above ground level during mid-afternoon.