Influence of lead acetate on soil microbial biomass and community structure in two different soils with the growth of Chinese cabbage (Brassica chinensis)

A greenhouse pot experiment was conducted to evaluate the impact of different concentrations of lead acetate on soil microbial biomass and community structure during growth of Chinese cabbage (Brassica chinensis) in two different soils. The field soils were used for a small pot, short-term 60-day growth chamber study. The soils were amended with different Pb concentrations, ranging from 0 to 900mgkg(-1) soil. The experimental design was a 2 soilx2 vegetation/non-vegetationx6 treatments (Pb)x3 replicate factorial experiment. At 60 days the study was terminated and soils were analyzed for microbial parameters, namely, microbial biomass, basal respiration and PLFAs. The results indicated that the application of Pb at lower concentrations (100 and 300mgkg(-1)) as lead acetate resulted in a slight increase in soil microbial biomass, whereas Pb concentrations >500mgkg(-1) caused an immediate gradual significant decline in biomass. However, the degree of impact on soil microbial biomass and basal respiration by Pb was related to management (plant vegetation) or the contents of clay and organic matter in soils. The profiles of 21 phospholipid fatty acids (PLFAs) were used to assess whether observed changes in functional microbial parameters were accompanied by changes in the composition of the microbial communities after Pb application at 0, 300 and 900mg Pbkg(-1) soil. The results of principal component analyses (PCA) indicated that there were significant increases in fungi biomarkers of 18:3omega6c, 18:1omega9c and a decrease in cy17:0, which is an indicator of gram-negative bacteria for the high levels of Pb treatments In a word, soil microbial biomass and community structure, therefore, may be sensitive indicators reflecting environmental stress in soil-Pb-plant system. However, further studies will be needed to better understand how these changes in microbial community structure might actually impact soil microbial community function.     

The effect of triclosan on microbial community structure in three soils

The application of sewage sludge to land can expose soils to a range of associated chemical toxicants. In this paper we explore the effects of the broad spectrum anti-microbial compound triclosan on the phenotypic composition of the microbial communities of three soils of contrasting texture (loamy sand, sandy loam and clay) using phospholipid fatty-acid (PLFA) analysis. Each soil type was dosed and subsequently re-dosed 6 weeks later with triclosan at five nominal concentrations in microcosms (10, 100, 500, 1000 mg kg⁻¹ and a zero-dose control). PLFA profiles were analysed using multivariate statistics focussing on changes in the soil phenotypic community structure. Additionally, ratios of fungal:bacterial PLFA indicators and cyclo:mono-unsaturated PLFAs (a common stress indicator) were calculated. It was hypothesised that triclosan addition would alter the community structure in each soil with a particular effect on the fungal:bacterial ratio, since bacteria are likely to be more susceptible to triclosan than fungi. It was also hypothesised that the PLFA response to re-dosing would be suppressed due to acclimation. Although the microbial community structure changed over the course of the experiment, the response was complex. Soil type and time emerged as the most important explanatory factors. Principal component analysis was used to detect phenotypic responses to different doses of triclosan in each soil. As expected, there was a significant increase in the fungal:bacterial ratio with triclosan dose especially in treatments with the highest nominal concentrations. Furthermore, the PLFA response to re-dosing was negligible in all soils confirming the acclimation hypothesis.     

Testing nickel tolerance of Sorghastrum nutans and its associated soil microbial community from serpentine and prairie soils

Ecotypes of Sorghastrum nutans from a naturally metalliferous serpentine grassland and the tallgrass prairie were assessed for Ni tolerance and their utility in remediation of Ni-polluted soils. Plants were inoculated with serpentine arbuscular mycorrhizal (AM) root inoculum or whole soil microbial communities, originating from either prairie or serpentine, to test their effects on plant performance in the presence of Ni. Serpentine plants had marginally higher Ni tolerance as indicated by higher survival. Ni reduced plant biomass and AM root colonization for both ecotypes. The serpentine AM fungi and whole microbial community treatments decreased plant biomass relative to uninoculated plants, while the prairie microbial community had no effect. Differences in how the soil communities affect plant performance were not reflected in patterns of root colonization by AM fungi. Thus, serpentine plants may be suited for reclamation of Ni-polluted soils, but AM fungi that occur on serpentine do not improve Ni tolerance.     

Microbial community structure in a silty clay loam soil after fumigation with three broad spectrum fungicides

The short-term effect of three broad spectrum fungicides on microbial activity, microbial biomass, soil ergosterol content, and phospholipid fatty acid (PLFA) profiles was studied. A silty clay loam soil was treated separately with captan, chlorothalonil and carbendazim at three different dosages of each fungicide. Chlorothalonil and carbendazim significantly altered soil microbial activity. However, changes in soil microbial biomass were only observed in soil treated with higher dosages of these fungicides. All dosages of fungicides significantly decreased fungal biomass as estimated by soil ergosterol content. PLFA analysis indicated that there was a shift in PLFA pattern. Higher dosages of all three fungicides decreased a straight-chain PLFA 22:0. In addition, soil treated with carbendazim increased cyclopropyl fatty acids. Compared to untreated soil, higher dosages of both captan and chlorothalonil affected PLFA 10Me 16:0, indicating that these fungicides can reduce actinomycetes population. Finally, our results suggest that application of both captan and chlorothalonil decreased Gram-positive to Gram-negative ratio.     

Impact of electrokinetic remediation on microbial communities within PCP contaminated soil

Electrokinetic techniques have been used to stimulate the removal of organic pollutants within soil, by directing contaminant migration to where remediation may be more easily achieved. The effect of this and other physical remediation techniques on the health of soil microbial communities has been poorly studied and indeed, largely ignored. This study reports the impact on soil microbial communities during the application of an electric field within ex situ laboratory soil microcosms contaminated with pentachlorophenol (PCP; 100mg kg(-1) oven dry soil). Electrokinetics reduced counts of culturable bacteria and fungi, soil microbial respiration and carbon substrate utilisation, especially close to the acidic anode where PCP accumulated (36d), perhaps exacerbated by the greater toxicity of PCP at lower soil pH. There is little doubt that a better awareness of the interactions between soil electrokinetic processes and microbial communities is key to improving the efficacy and sustainability of this remediation strategy.     

Fungicide impacts on microbial communities in soils with contrasting management histories

The impacts of the fungicides azoxystrobin, tebuconazole and chlorothalonil on microbial properties were investigated in soils with identical mineralogical composition, but possessing contrasting microbial populations and organic matter contents arising from different management histories. Degradation of all pesticides was fastest in the high OM/biomass soil, with tebuconazole the most persistent compound, and chlorothalonil the most readily degraded. Pesticide sorption distribution coefficient (K(d)) did not differ significantly between the soils. Chlorothalonil had the highest K(d) (97.3) but K(d) for azoxystrobin and tebuconazole were similar (13.9 and 12.4, respectively). None of the fungicides affected microbial biomass in either soil. However, all fungicides significantly reduced dehydrogenase activity to varying extents in the low OM/biomass soil, but not in the high OM/biomass soil. The mineralization of subsequent applications of herbicides, which represents a narrow niche soil process was generally reduced in both soils by azoxystrobin and chlorothalonil. 16S rRNA-PCR denaturing gradient gel electrophoresis (DGGE) indicated that none of the fungicides affected bacterial community structure. 18S rRNA PCR-DGGE analysis revealed that a small number of eukaryote bands were absent in certain fungicide treatments, with each band being specific to a single fungicide-soil combination. Sequencing indicated these represented protozoa and fungi. Impacts on the specific eukaryote DGGE bands showed no relationship to the extent to which pesticides impacted dehydrogenase or catabolism of herbicides.     

Influence of benomyl and prometryn on the soil microbial activities and community structures in pasture grasslands of Slovakia

The effects of pesticides (a herbicide and a fungicide) on the microbial community structure and their activity were analyzed in soil from four alpine pasture grasslands in Slovakia. Specifically, the effects of the herbicide, Gesagard (prometryn active ingredient), and fungicide, Fundazol 50 WP (benomyl active ingredient), on the microbial respiration activity (CO₂ production), the numbers of selective microbial physiological groups (CFU.g^?1) and the structure (relative abundance) of soil microbial communities [(phospholipid fatty acid (PLFA)] were analyzed under controlled laboratory conditions. All treatments including the treatments with pesticides increased (statistically significantly) the production of CO₂ in all fields during 21 days of incubation and posed a statistically insignificant negative influence on the numbers of the observed physiological groups of microorganisms. The significantly negative influence was evaluated only in the numbers of two physiological groups; spores of bacteria utilizing organic nitrogen and bacteria, and their spores utilizing inorganic nitrogen. A shift in the microbial composition was evident when the PLFA patterns of samples from different sites and treatments were compared by the Principal Component Analysis (PCA). According to the second component PCA 2 (15.95 %) the locations were grouped into two clusters. The first one involved the Donovaly and Dubakovo sites and the second one contained the Velka Fatra and Mala Fatra locations. The PLFA composition of the soils showed important changes after the treatment with pesticides according to PCA 1 (66.06 %). Other treatments had not had a significant effect on the soil microbial community with the exception of the population of fungi. The lower relative abundance (significant effect) of Gram-positive bacteria, actinomycetes and general group of bacteria were determined in samples treated by the herbicide Gesagard. The application of fungicide Fundazol decreased (statistically significantly) the relative abundance of actinomycetes and general group of bacteria and paradoxically increased the population of fungi.     

Alterations of microbial populations and composition in the rhizosphere and bulk soil as affected by residual acetochlor

Acetochlor is a widely used herbicide in maize fields; however, the ecological risk of its residue in the soil–plant system remains unknown. We investigated the dissipation dynamics of field dose acetochlor and clarified its impact on microbial biomass and community structure both in the rhizosphere and bulk soil over 1 month after its application. Soil microbial parameters such as quantities of culturable bacteria and fungi represented by colony-forming units, soil microbial biomass carbon (SMB_C), and phospholipid fatty acids (PLFAs) were determined across different sampling times. The results showed that the dissipation half-lives of acetochlor were, respectively, 2.8 and 3.4 days in the rhizosphere and bulk soil, and 0.02–0.07 μg/g residual acetochlor could be detected in the soil 40 days after its application. Compared to the bulk soil, microbial communities in the rhizosphere soil were inclined to be affected by the application of acetochlor: SMB_C content and bacterial growth were most likely to be increased; however, fungal growth was prone to be inhibited. The principal component analysis of PLFAs, as well as the comparisons of fungi/bacteria and cy17:0/C16:1ω9c ratios between different treatments over sampling time, revealed that the soil microbial community composition was significantly affected by acetochlor at its early application stage (at day 15); thereafter, the effects of acetochlor were attenuated or even could not be detected. Our results suggested that residual acetochlor did not confer a long-term impairment on viable bacterial groups in the rhizosphere and bulk soil.     

In situ fixation of metals in soils using bauxite residue: biological effects

Soils polluted with heavy metals can cause phytotoxicity and exhibit impared microbial activities. In this paper we evaluate the responses of different biological endpoints to in situ remediation processes. Three soil amendments (red mud, beringite and lime) were applied to two soils polluted by heavy metals. Oilseed rape, wheat, pea and lettuce were grown successively in pots on the untreated and amended soils and their yield and metal uptake were determined. A suite of microbial tests (lux-marked biosensors, Biolog and soil microbial biomass) were performed to determine the effect of the soil amendments on the functionality and size of the soil microbial community. In both soils all three amendments reduced phytotoxicity of heavy metals, enhanced plant yields and decreased the metal concentrations in plants. The red mud treatment also increased soil microbial biomass significantly. The microbial biosensors responded positively to the remediation treatments in the industrially-contaminated soil used in the experiment. Red mud applied at 2% of soil weight was as effective as beringite applied at 5%. The results also showed that since the biological systems tested respond differently to the alleviation of metal toxicity, a suite of biological assays should be used to assess soil remediation processes.     

Effect of methamidophos and urea application on microbial communities in soils as determined by microbial biomass and community level physiological profiles

In this study, we evaluated the effect of the application by two agrochemicals, methamidophos (O,S-dimethyl phosphoroamidothioate) and urea, on microbial diversity in soil, using the combined approaches of soil microbial biomass analysis and community level physiological profiles (CLPPs). The results showed that both a low and a high level of methamidophos application (CS2 and CS3) and urea application (CS4) significantly decreased microbial biomass C (Cmic) by 41-83% compared with the control (CS1). The soil organic C (Corg) values of CS3 and CS4 were significantly higher and lower by 24% and 14%, respectively, than that of CS1. Similarly to Cmic, the values of Cmic/Corg of the three applied soils which decreased were lower by 31-84% than that of CS1. In contrast, the respiration activity of the three applied soils were significantly higher than the control. Agrochemical application also significantly increased the soil total of N and P (Ntol and Ptol) and decreased the Corg/Ntol and Corg/Ptol values. The CLPPs results showed that the AWCD (average well color development) of the three applied soils were significantly higher than that of CS1 during the incubation period. Substrate richness, Shannon and Simpson indices of microbial communities under chemical stresses, increased significantly. In addition, the CFU (colony-forming unit) numbers of methamidophos metabolized bacteria in CS2 and CS3 also increased significantly by 86.1% and 188.9% compared with that of CS1. The combined results suggest that agrochemicals reduce microbial biomass and enhance functional diversities of soil microbial communities; meanwhile, some species of bacteria may be enriched in soils under methamidophos stress.     

Influence of agricultural antibiotics and 17beta-estradiol on the microbial community of soil

Agricultural pharmaceuticals are a major environmental concern because of their hazardous effects on human and wildlife. This study analyzed phospholipid ester-linked fatty acids (PLFAs) and quinones to investigate the effects of a steroid (17beta-estradiol) and agricultural antibiotics (chlortetracycline and tylosin) on soil microbes in the laboratory. Two different types of soil were used: Sequatchie loam (0.8% organic matter) and LaDelle silt loam (9.2% organic matter). The soils were spiked with 17beta-estradiol and antibiotics, alone or in combination. In Sequatchie loam, 17beta-estradiol significantly increased the microbial biomass, especially the biomarkers for beta proteobacteria (16:1omega7c, 18:1omega7c, Cy17:0, and UQ-8). The coexistence of antibiotics decreased the stimulatory effect of 17beta-estradiol on the microbial community. In LaDelle silt loam, there were no significant differences in total microbial biomass and their microbial community structure among the treatments. Overall, 17beta-estradiol changed the microbial community of soil and the presence of antibiotics nullified the effect of 17beta-estradiol. However, the effects of 17beta-estradiol and antibiotics on soil microbes were sensitive to the soil properties, as seen in the LaDelle silt loam.     

Soil pH effects on the interactions between dissolved zinc,non-nano- and nano-ZnO with soil bacterial communities

Zinc oxide nanoparticles (ZnO NPs) are used in an array of products and processes, ranging from personal care products to antifouling paints, textiles, food additives, antibacterial agents and environmental remediation processes. Soils are an environment likely to be exposed to manmade nanoparticles due to the practice of applying sewage sludge as a fertiliser or as an organic soil improver. However, understanding on the interactions between soil properties, nanoparticles and the organisms that live within soil is lacking, especially with regards to soil bacterial communities. We studied the effects of nanoparticulate, non-nanoparticulate and ionic zinc (in the form of zinc chloride) on the composition of bacterial communities in soil with a modified pH range (from pH 4.5 to pH 7.2). We observed strong pH-dependent effects on the interaction between bacterial communities and all forms of zinc, with the largest changes in bacterial community composition occurring in soils with low and medium pH levels (pH 4.8 and 5.9). The high pH soil (pH 7.2) was less susceptible to the effects of zinc exposure. At the highest doses of zinc (2500 mg/kg dw soil), both nano and non-nano particulate zinc applications elicited a similar response in the soil bacterial community, and this differed significantly to the ionic zinc salt treatment. The results highlight the importance of considering soil pH in nanotoxicology studies, although further work is needed to determine the exact mechanisms controlling the toxicity and fate and interactions of nanoparticles with soil microbial communities.     

Effects of residue incorporation and plant growth on soil labile organic carbon and microbial function and community composition under two soil moisture levels

This study investigates the effects of residue incorporation coupled with plant growth and soil moisture level on wheat biomasses, soil nutrients, labile organic carbon (LOC), microbial metabolic profiles, and community composition. Four management practices were used in a 180-day pot experiment: (1) control (CON), (2) maize (Zea mays L.) residue incorporation without plants (MR), (3) wheat (Triticum aestivum L.) plants without maize residue (WP), and (4) maize residue incorporation with wheat plants (MRWPs). Each management practice included soil moisture at both 40 and 80% of field capacity. At wheat harvest, soil nutrient contents in the WP and MRWP treatments were significantly lower than in the CON and MR treatments. In comparison with the CON treatment, MR, WP, and MRWP treatments resulted in 35, 23, and 67% increases in dissolved organic carbon content; 17, 12, and 34% increases in hot-water extractable organic carbon content; and 78, 50, and 150% increases in microbial biomass carbon content. Furthermore, microbial utilizations of carboxylic acids and polymer carbon sources in the MR, WP, and MRWP treatments were 261 and 88%, 239 and 105%, and 300 and 126% higher than in the CON treatment. The MR and CON treatments had similar phospholipid fatty acid (PLFA) content but the WP and MRWP treatments had significantly increased gram-negative content and changes to community composition compared with the CON and MR treatments. The wheat biomass, LOC, and PLFA contents significantly increased with greater soil moisture. Overall, these results suggest an additive effect of residue incorporation and plant growth on LOC contents, primarily due to the changes in microbial utilization of carbon sources and community composition.     

Remediation efficiency of vapour extraction of sandy soils contaminated with cyclohexane: Influence of air flow rate, water and natural organic matter content

This work reports the analysis of the efficiency and time of soil remediation using vapour extraction as well as provides comparison of results using both, prepared and real soils. The main objectives were: (i) to analyse the efficiency and time of remediation according to the water and natural organic matter content of the soil; and (ii) to assess if a previous study, performed using prepared soils, could help to preview the process viability in real conditions. For sandy soils with negligible clay content, artificially contaminated with cyclohexane before vapour extraction, it was concluded that (i) the increase of soil water content and mainly of natural organic matter content influenced negatively the remediation process, making it less efficient, more time consuming, and consequently more expensive; and (ii) a previous study using prepared soils of similar characteristics has proven helpful for previewing the process viability in real conditions.     

Influence of root-exudates concentration on pyrene degradation and soil microbial characteristics in pyrene contaminated soil

The effect of ryegrass (Lolium perenne L.) root-exudates concentration on pyrene degradation and the microbial ecological characteristics in the pyrene contaminated soil was investigated by simulating a gradually reducing concentration of root exudates with the distance away from root surface in the rhizosphere. Results showed that, after the root-exudates were added 15 d, the pyrene residue in contaminated soil responded nonlinearly in the soils with the same pyrene contaminated level as the added root-exudates concentration increased, which decreased first and increased latter with the increase of the added root-exudates concentration. The lowest pyrene concentration appeared when the root exudates concentration of 32.75 mg kg(-1) total organic carbon (TOC) was added. At the same time, changes of microbial biomass carbon (MBC, C(mic)) and microbial quotient (C(mic)/C(org)) were opposite to the trend of pyrene degradation as the added root-exudates concentration increased. Phospholipid fatty acid (PLFA) analysis revealed that bacteria was the dominating microbial community in pyrene contaminated soil, and the changing trends of pyrene degradation and bacteria number were the same. The changing trend of endoenzyme-dehydrogenase activity was in accordance with that of soil microbe, indicating which could reflect the quantitative characteristic of detoxification to pyrene by soil microbe. The changes in the soils microbial community and corresponding microbial biochemistry characteristics were the ecological mechanism influencing pyrene degradation with increasing concentration of the added root-exudates in the pyrene contaminated soil.     

Effect of tetraconazole application on the soil microbial community

Tetraconazole is one of the most commonly used triazole fungicides in agricultural practice, and its continuous application poses a potential risk for non-target soil microorganisms. Therefore, the objective of this study was to evaluate the effect of tetraconazole at the field rate (T1, 0.33 mgkg^?1 of soil), three times the field rate (T3, 1.00 mgkg^?1 of soil) and 10 times the field rate (T10, 3.33 mgkg^?1 of soil) on the soil microorganisms. To ascertain this effect, the tetraconazole concentration and the microbial properties with potential as bioindicators of soil health (i.e. microbial biomass C, basal respiration, substrate-induced respiration, structure diversity and functional community profiling) were determined. The results showed that the degradation half-lives of tetraconazole varied from 69 to 87 days, depending on the three application concentrations. The microbial biomass C, basal respiration and substrate-induced respiration were inhibited, but they tended to recover at the end of the incubation when tetraconazole was applied at the recommended field rate. The ratios of the gram-negative to gram-positive (GN to GP) bacteria decreased, and the fungi to bacteria ratio increased after a temporal decrease on the seventh day. A principal component analysis of the PLFAs showed that tetraconazole application significantly shifted the microbial community structure on day 7. Different functional community profiles were observed, depending on the tetraconazole application rates. It was concluded that tetraconazole application decreases the soil microbial biomass and activity and changes the structures of the soil microbial community.     

Effect of soil on microbial responses to metal contamination

An experiment was conducted to investigate microbial responses to metal inputs in five soils with varying clay and organic contents; one soil had also a higher pH. These soils were treated with a low metal, sewage sludge control or with this sludge contaminated to achieve Cu=112, Ni=58 and Zn=220 mg kg(-1) in medium and Cu=182, Ni=98 and Zn=325 mg kg(-1) in high metal soils. CO(2) evolution rates were measured at 1 week and at 4-5-day intervals thereafter until the end of the incubation (7 weeks). Extractable metals (CaCl(2) and water), biomass C, metabolic quotient, ergosterol, bacterial-fungal phospholipid fatty acid (PLFA-3 weeks only) ratio and mineral N were measured at 3 and 7 weeks. Metal inputs caused a marked increase in metal availability in the slightly acidic sandy loams, a smaller increase in slightly acidic clays and had little effect in the alkaline loam. After an initial increase in CO(2) evolution with metal inputs in all soils, the high metal treatment alone caused a significant decrease at later stages, mainly in sandy loams. Although biomass C and metabolic quotient decreased in all soils with higher metal inputs, the effect was more pronounced in the sandy loams. Metal inputs increased ergosterol and decreased bacterial-fungal PLFA ratios in most soils. Larger mineral N contents were found in all high metal soils at 3 weeks but, after 7 weeks, metals caused a significant decrease in sandy loams. CaCl(2) and water-extractable Cu, Ni and Zn contents were closely correlated with microbial indices in sandy loam but not in clay soils. Overall, the effect of treatments on microbial and extractable metal indices was greater in loams. Within a single series, higher organic soils showed less pronounced responses to metal inputs, although this trend was not always consistent.     

Sorption of 3,4-dichloroaniline on four contrasting Greek agricultural soils and the effect of liming

Sorption of 3,4-dichloroaniline (3,4-DCA) on four typical Greek agricultural soils, with distinct texture, organic matter content and cation exchange capacities, was compared by using sorption isotherms and the parameters calculated from the fitted Freundlich equations. The sorption process of 3,4-DCA to the soil was completed within 48–72 h. The 3,4-DCA sorption on all soils was well described by the Freundlich equation and all sorption isotherms were of the L-type. The sandy clay loam soil with the highest organic matter content and a slightly acidic pH was the most sorptive, whereas the two other soil types, a high organic matter and neutral pH clay and a low organic matter and acidic loam, had an intermediate sorption capacity. A typical calcareous soil with low organic matter had the lowest sorption capacity which was only slightly higher than that of river sand. The 3,4-DCA sorption correlated best to soil organic matter content and not to clay content or cation exchange capacity, indicating the primary role of organic matter. The distribution coefficient (K _d) decreased with increasing initial 3,4-DCA concentration and the reduction was most pronounced with the highly sorptive sandy clay loam soil, suggesting that the available sorption sites of the soils are not unlimited. Liming of the two acidic soils (the sandy clay loam and the loam) raised their pH (from 6.2 and 5.3, respectively) to 7.8 and reduced their sorption capacity by about 50 %, indicating that soil pH may be the second in importance factor (after organic matter) determining 3,4-DCA sorption.     

Sorption of 3,4-dichloroaniline on four contrasting Greek agricultural soils and the effect of liming

Sorption of 3,4-dichloroaniline (3,4-DCA) on four typical Greek agricultural soils, with distinct texture, organic matter content and cation exchange capacities, was compared by using sorption isotherms and the parameters calculated from the fitted Freundlich equations. The sorption process of 3,4-DCA to the soil was completed within 48-72 h. The 3,4-DCA sorption on all soils was well described by the Freundlich equation and all sorption isotherms were of the L-type. The sandy clay loam soil with the highest organic matter content and a slightly acidic pH was the most sorptive, whereas the two other soil types, a high organic matter and neutral pH clay and a low organic matter and acidic loam, had an intermediate sorption capacity. A typical calcareous soil with low organic matter had the lowest sorption capacity which was only slightly higher than that of river sand. The 3,4-DCA sorption correlated best to soil organic matter content and not to clay content or cation exchange capacity, indicating the primary role of organic matter. The distribution coefficient (K(d)) decreased with increasing initial 3,4-DCA concentration and the reduction was most pronounced with the highly sorptive sandy clay loam soil, suggesting that the available sorption sites of the soils are not unlimited. Liming of the two acidic soils (the sandy clay loam and the loam) raised their pH (from 6.2 and 5.3, respectively) to 7.8 and reduced their sorption capacity by about 50 %, indicating that soil pH may be the second in importance factor (after organic matter) determining 3,4-DCA sorption.     

Influence of Agricultural Antibiotics and 17β-Estradiol on the Microbial Community of Soil

Agricultural pharmaceuticals are a major environmental concern because of their hazardous effects on human and wildlife. This study analyzed phospholipid ester-linked fatty acids (PLFAs) and quinones to investigate the effects of a steroid (17β-estradiol) and agricultural antibiotics (chlortetracycline and tylosin) on soil microbes in the laboratory. Two different types of soil were used: Sequatchie loam (0.8% organic matter) and LaDelle silt loam (9.2% organic matter). The soils were spiked with 17β-estradiol and antibiotics, alone or in combination. In Sequatchie loam, 17β-estradiol significantly increased the microbial biomass, especially the biomarkers for beta proteobacteria (16:1ω7c, 18:1ω7c, Cy17:0, and UQ-8). The coexistence of antibiotics decreased the stimulatory effect of 17β-estradiol on the microbial community. In LaDelle silt loam, there were no significant differences in total microbial biomass and their microbial community structure among the treatments. Overall, 17β-estradiol changed the microbial community of soil and the presence of antibiotics nullified the effect of 17β-estradiol. However, the effects of 17β-estradiol and antibiotics on soil microbes were sensitive to the soil properties, as seen in the LaDelle silt loam.