Transformations,Lifetimes, and Sources of NO2, HONO,and HNO3 in Indoor Environments

Recent research has demonstrated that nitrogen oxides are transformed to nitrogen acids in indoor environments, and that significant concentrations of nitrous acid are present in indoor air. The purpose of the study reported in this paper has been to investigate the sources, chemical transformations and lifetimes of nitrogen oxides and nitrogen acids under the conditions existing in buildings. An unoccupied single family residence was instrumented for monitoring of NO, NO₂, NO_y, MONO, HNO₃, CO, temperature, relative humidity, and air exchange rate. For some experiments, NO₂ and HONO were injected into the house to determine their removal rates and lifetimes. Other experiments investigated the emissions and transformations of nitrogen species from unvented natural gas appliances. We determined that HONO is formed by both direct emissions from combustion processes and reaction of NO₂ with surfaces present indoors. Equilibrium considerations influence the relative contributions of these two sources to the indoor burden of HONO. We determined that the lifetimes of trace nitrogen species varied in the order NO ~ HONO > NO₂ >HNO₃. The lifetimes with respect to reactive processes are on the order of hours for NO and HONO, about an hour for NO₂, and 30 minutes or less for HNO3. The rapid removal of NO₂ and long lifetime of HONO suggest that HONO may represent a significant fraction of the oxidized nitrogen burden in indoor air.     

Usage,definition, and measurement of coexistence,tolerance and acceptance in wildlife conservation research in Africa

The terms ‘coexistence’, ‘tolerance,’ and ‘acceptance’ appear frequently in conservation literature, but lack consistent characterization, making them difficult to apply across intervention frameworks. This review aims to describe the common characterizations of these three terms using Africa-based research as a case study. Through systematic lexical searches, we identified 392 papers containing one or more of the three terms. We assessed their usage, definition, and measurement (or lack thereof) in wildlife conservation. Coexistence was used in 46% of papers, but was defined in only 2% and measured in 4%. Tolerance and acceptance were used in 63% and 61% of the papers in which they appeared, respectively, defined in 4% and 2%, and measured in 19% and 5%. These results confirm the lack of clear understanding of these concepts and evidence the need for a precise lexicon. This would allow conservationists to cohesively describe their work and increase replicability of research across contexts.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01352-6) contains supplementary material, which is available to authorized users.     

Evaluation of the Stone and Marble Industry in Palestine: environmental,geological, health,socioeconomic, cultural,and legal perspectives,in view of sustainable development

The Stone (limestone) and Marble (trade name) Industry (SMI) is one of the most important and active industries in Palestine, as being economically and financially rewarding and greatly beneficial to the public and private sectors. This industry, which employs about 15,000–20,000 workers, contributes 20–25% to the total industrial revenues of Palestine, and 4.5% to the total gross national product. Despite its benefits, SMI has adverse effects on public health, the environment, biodiversity, water systems (both surface and underground), green cover, and ecosystems in general, as it is considered one of the most air- water-, soil-, and noise-polluting sources. To achieve the purpose of this research paper, available data and literature are analyzed, evaluated, and used, in order to provide a comprehensive understanding of the status of SMI, in light of sustainable development. This relates to various perspectives, including limestone geology, geopolitics, socioeconomics, culture, technology, legislation, as well as climate change, acid rain, and harmful effects of the SMI scale on public health and safety, environmental well-being, and challenges facing the industry. Two field studies, carried out in northern and southern West Bank, dealing with particulate matter (PM₁, PM_2.5, PM₇, PM₁₀, and TSP) and environmental pollution, were analyzed, and their results were compared with each other, as well as with the World Health Organization’s (WHO) guidelines. It is found that both West Bank’s areas are heavily polluted, resulting in considerable adverse impacts on public health, the environment, and green cover. Based on the findings of this paper, it is recommended that SMI should properly adhere to WHO guidelines and international standards to make the industry safer and more durable and sustainable, with fewer negative impacts on public health, the environment, and green cover.

     

Photochemistry of phenanthrene,pyrene, and fluoranthene in ice and snow

Although polycyclic aromatic hydrocarbons (PAHs) are common pollutants in snow, there is little quantitative data about their rates of photodegradation in this environment. To begin to address this gap, we have measured the degradation kinetics of phenanthrene, pyrene, and fluoranthene on ice, as these are the most abundant PAHs in arctic snow. Frozen aqueous solutions of individual PAHs, with and without added hydrogen peroxide (HOOH) as a source of hydroxyl radical (OH), were illuminated with simulated sunlight. For all three PAHs, direct photodecay is the main mechanism of degradation, while OH-initiated indirect photodegradation is a minor sink. Rate constants (±1 SE) for direct photodegradation extrapolated to midday, surface snow conditions at Summit, Greenland on the summer solstice are 3.8 (±0.8) × 10^?5, 28 (±3) × 10^?5, and 1.4 (±0.7) × 10^?5 s^?1 for phenanthrene, pyrene, and fluoranthene, respectively. Apparent quantum efficiencies for photodegradation with simulated sunlight were 3.8 (±0.8) × 10^?3, 4.3 (±0.5) × 10^?4, and 2 (±1) × 10^?5, respectively. Calculated PAH lifetimes in surface snow under Summit conditions are 1–19 h during mid-summer, but increase to >100 days in the dark winter. While the short photodegradation lifetimes in the summer suggest that there should be no appreciable PAH levels in this season, past measurements at Summit sometimes show significant levels of these PAHs in summer surface snow. This discrepancy is likely due to differences in PAH location between lab samples (where the PAHs are probably in quasi-liquid layers) and real snow (where PAHs are likely primarily associated with particulate matter).     

Contamination and emission factors of PCDD/Fs, unintentional PCBs, HxCBz, PeCBz and polychlorophenols in chloranil in China

The production of chloranil is regarded as a potentially significant source of unintentional POPs. This research aimed to identify the contamination levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), hexachlorobenzene (HxCBz), pentachlorobenzene (PeCBz) and polychlorophenols in chloranil samples and identify the formation pathways. The toxicity equivalent (TEQ) values for PCDD/Fs in the chloranil samples ranged from 163 to 1 540 200 pg I-TEQ g⁻¹, while the PCB TEQ values ranged from 1.9 to 3.3 pg WHO-TEQ g⁻¹. High levels of HxCBz, PeCBz and polychlorophenols were also detected in the chloranil samples. The average emission factors were 522.2 mg I-TEQ t⁻¹ (PCDD/Fs), 0.0026 mg WHO-TEQ t⁻¹ (PCBs), 32.6 mg t⁻¹ (HxCBz), and 136.6 mg t⁻¹ (PeCBz). The PCDD/Fs and PCBs are thought to be formed from the polychlorophenols and polychlorobenzenes generated during the chloranil production process. Purification of the chloranil products can reduce the unintentional POPs releases and protect the environment.     

Adsorption,Desorption, and Mobility of Permethrin in Malaysian Soils

Abstract

The adsorption, desorption, and mobility of permethrin in six tropical soils was determined under laboratory and greenhouse conditions. The six soils were selected from vegetable growing areas in Malaysia. Soil organic matter (OM) was positively correlated (r ² = 0.97) with the adsorption of permethrin. The two soils, namely, Teringkap 1 and Lating series with the highest OM (3.2 and 2.9%) released 32.5 and 30.8% of the adsorbed permethrin after four consecutive repetitions of the desorption process, respectively, compared to approximately 75.4% of the Gunung Berinchang soil with the lowest OM (1.0%) under the same conditions. The mobility of permethrin down the soil column was inversely correlated to the organic matter content of the soil. Permethrin residue penetrated only to the 10–15 cm zone in the Teringkap 1 soil with 3.2% OM but penetrated to a depth of more than 20 cm in the other soils. The Berinchang series soil with the lowest OM (1.0%) yielded leachate with 14.8% permethrin, the highest level in leachates from all the soils tested. Therefore, the possibility for permethrin to contaminate underground water may be greater in the presence of low organic matter content, which subsequently allows a higher percentage of permethrin to move downwards through the soil column.     

PCBs in sediments of the Great Lakes--distribution and trends, homolog and chlorine patterns, and in situ degradation

A region-wide data analysis on polychlorinated biphenyls (PCBs) in the sediment of the Great Lakes reveals a total accumulation of approximately 300 ± 50 tonnes, representing a >30% reduction from the 1980s. Evidence of in situ degradation of sediment PCB was found, with estimated t_1/2 of 11 and 17 years, at two open water locations in Lake Ontario. The relative abundance of heavy homologs as well as para-chlorines decreases with increasing depth, while the opposite is true for medium and light homologs and ortho-chlorines. In Lake Michigan, the vertical pattern features enrichment of heavier congeners and reduction of ortho-chlorines in deeper sediment layers, opposite to the trend in Lake Ontario. PCBs decrease log-linearly with increasing latitude and longitude. Air deposition of PCBs to lake sediment decreases at about 0.077 ng cm⁻² yr⁻¹ per degree latitude (N) for the geographic region extending from the Great Lakes to within the Arctic Circle.     

Reproductive toxicity of lead,cadmium, and phthalate exposure in men

Environmental toxicants viz lead or cadmium and phthalate esters (di(2-ethylhexyl) phthalate [DEHP], dibutyl phthalate [DBP], and diethyl phthalate [DEP]) widely found in different environmental strata are linked to deteriorating male reproductive health. The objective was to assess the relationships between the seminal lead, cadmium, and phthalate (DEHP, DBP, DEP) concentrations at environmental level and serum hormone levels and semen quality in non-occupationally exposed men and specify the effect of individual and combined exposure of toxicants on semen quality. A study of 60 male partners of couples attending the Andrology Laboratory of the Reproductive Biology Department, All India Institute of Medical Sciences (AIIMS), New Delhi, India for semen analysis to assess their inability to achieve a pregnancy was selected for the study. The results of univariate and stepwise multiple regression analysis in the unadjusted model showed a significant correlation between lead or cadmium and phthalates DEHP/DBP/DEP and sperm motility, sperm concentration, and DNA damage. After adjusting for potential confounders, an association with lead or DEHP was only observed. The present data shows that lead (Pb) or cadmium (Cd) or phthalates might independently contribute to decline in semen quality and induce DNA damage. Phthalates might influence reproductive hormone testosterone. These findings are significant in light of the fact that men are exposed to a volley of chemicals; however, due to the small sample size, our finding needs to be confirmed in a larger population.     

Toxicity of carbaryl,diquat dibromide,and fluoranthene,individually and in mixture,to larval grass shrimp,Palaemonetes pugio

This study examined the toxicity of two pesticides (carbaryl and diquat dibromide) and one polycyclic aromatic hydrocarbon (fluoranthene), both singly and in mixture, to grass shrimp larvae (Palaemonetes pugio). These three chemicals are all present in coastal environments and can easily enter estuarine ecosystems. Fluoranthene was the most toxic chemical with a 96-h LC₅₀ value of 32.45 μ g/L, followed by carbaryl (43.02 μ g/L) and diquat dibromide (1624 μ g/L). In the chemical mixture tests, the binary carbaryl/diquat dibromide mixture and the ternary carbaryl/diquat dibromide/fluoranthene mixture had additive results.     

Occurrence and removal of lidocaine,tramadol, venlafaxine,and their metabolites in German wastewater treatment plants

Purpose  

Some of the pharmaceuticals that are not extensively investigated in the aquatic environment are the anesthetic lidocaine (LDC), the analgesic tramadol (TRA), and the antidepressant venlafaxine (VEN). LDC metabolizes to 2,6-xylidine (2,6-DMA) and monoethylglycinexylidine (MEGX), TRA to O-desmethyltramadol (ODT), and VEN to O-desmethylvenlafaxine (ODV). Within this study, the distribution and behavior of these compounds in German wastewater treatment plants (WWTPs) were investigated.     

Sorption and desorption kinetics of diuron,fluometuron, prometryn and pyrithiobac sodium in soils

Abstract

The sorption and desorption characteristics of four herbicides (diuron, fluometuron, prometryn and pyrithiobac‐sodium) in three different cotton growing soils of Australia was investigated. Kinetics and equilibrium sorption and desorption isotherms were determined using the batch equilibrium technique. Sorption was rapid (> 80% in 2 h) and sorption equilibrium was achieved within a short period of time (ca 4 h) for all herbicides. Sorption isotherms of the four herbicides were described by Freundlich equation with an r² value > 0.98. The herbicide sorption as measured by the distribution coefficient (K_d) values ranged from 3.24 to 5.71 L/kg for diuron, 0.44 to 1.13 L/kg for fluometuron, 1.78 to 6.04 L/kg for prometryn and 0.22 to 0.59 L/kg for pyrithiobac‐sodium. Sorption of herbicides was higher in the Moree soil than in Narrabri and Wee Waa soils. When the K_d values were normalised to organic carbon content of the soils (K_oC), it suggested that the affinity of the herbicides to the organic carbon increased in the order: pyrithiobac‐sodium < fluometuron < prometryn < diuron. The desorption isotherms were also adequately described by the Freundlich equation. For desorption, all herbicides exhibited hysteresis and the hysteresis was stronger for highly sorbed herbicides (diuron and prometryn) than the weakly sorbed herbicides (fluometuron and pyrithiobac‐sodium). Hysteresis was also quantified as the percentage of sorbed herbicides which is not released during the desorption step ω = [n_ad / n_de ‐1] x 100). Soil type and initial concentration had significant effect on ω. The effect of sorption and desorption properties of these four herbicides on the off‐site transport to contaminate surface and groundwater are also discussed in this paper.     

Variation of MCPA, metribuzine, methyltriazine-amine and glyphosate degradation, sorption, mineralization and leaching in different soil horizons

Pesticide mineralization and sorption were determined in 75 soil samples from 15 individually drilled holes through the vadose zone along a 28 km long transect of the Danish outwash plain. Mineralization of the phenoxyacetic acid herbicide MCPA was high both in topsoils and in most subsoils, while metribuzine and methyltriazine-amine was always low. Organic matter and soil pH was shown to be responsible for sorption of MCPA and metribuzine in the topsoils. The sorption of methyltriazine-amine in topsoil was positively correlated with clay and negatively correlated with the pH of the soil. Sorption of glyphosate was tested also high in the subsoils. One-dimensional MACRO modeling of the concentration of MCPA, metribuzine and methyltriazine-amine at 2 m depth calculated that the average concentration of MCPA and methyltriazine-amine in the groundwater was below the administrative limit of 0.1 μg/l in all tested profiles while metribuzine always exceeded the 0.1 μg/l threshold value.     

Lead,mercury, cadmium,chromium, nickel,copper, zinc,calcium, iron,manganese and chromium (VI) levels in Nigeria and United States of America cement dust

This study was aimed at investigating the relative abundance of heavy metals in cement dust from different cement dust factories in order to predict their possible roles in the severity of cement dust toxicity. The concentrations of total mercury (Hg), copper (Cu), chromium (Cr), cadmium (Cd), nickel (Ni), manganese (Mn), lead (Pb), iron (Fe) and chromium (VI) (Cr (VI)) levels in cement dust and clinker samples from Nigeria and cement dust sample from the United States of America (USA) were determined using graphite furnace atomic absorption (GFAAS), while Zn and Ca were measured by flame atomic absorption spectrophotometry (FAAS), and Cr (VI) by colorimetric method. Total Cu, Ni and Mn were significantly higher in cement dust sample from USA (p < 0.05), also, both total Cr and Cr (VI) were 5.4–26 folds higher in USA cement dust compared with Nigeria cement dust or clinker (p < 0.001). Total Cd was higher in both Nigeria cement dust and clinker (p < 0.05 and p < 0.001), respectively. Mercury was more in both Nigeria cement dust and clinker (p < 0.05), while Pb was only significantly higher in clinker from Nigeria (p < 0.001). These results show that cement dust contain mixture of metals that are known human carcinogens and also have been implicated in other debilitating health conditions. Additionally, it revealed that metal content concentrations are factory dependent. This study appears to indicate the need for additional human studies relating the toxicity of these metals and their health impacts on cement factory workers.     

Atmospheric particle characterization, distribution, and deposition in Xi'an, Shaanxi Province, Central China

Physical characterization and chemical analysis of settled dusts collected in Xi’an from November 2007 to December 2008 show that (1) dust deposition rates ranged from 14.6 to 350.4 g m⁻² yr⁻¹. The average deposition rate (76.7 g m⁻² yr⁻¹) ranks the 11th out of 56 dust deposition rates observed throughout the world. The coal-burning power was the major particle source; (2) on average (except site 4), ∼10% of the settled dusts having size <2.6, ∼30% having size <10.5, and >70% having size <30 μm; (3) the concentrations for 20 out of 27 elements analyzed were upto 18 times higher than their soil background values in China. With such high deposition rates of dusts that contain elevated levels of toxic elements, actions should be taken to reduce emission and studies are needed to assess the potential impacts of settled particles on surface ecosystem, water resource, and human health in the area.     

Cropland changes in times of conflict,reconstruction, and economic development in Iraqi Kurdistan

The destruction of land and forced migration during the Anfal attacks against the Kurds in Iraq in the late 1980s has been reported to have severe consequences for agricultural development. A reconstruction program to aid people in returning to their lands was launched in 1991. To assess the agricultural situation in the Duhok governorate during the pre-Anfal (A), post-Anfal (B), reconstruction (C), and present (D) periods, we mapped winter crops by focusing on inter-annual variability in vegetation greenness, using satellite images. The results indicate a decrease in cultivated area between period A and B, and a small increase between period B and C. This supports reports of a decline in cultivated area related to the Anfal campaign, and indicates increased activity during the reconstruction program. Period D showed a potential recovery with a cropland area similar to period A.     

Spatial distribution of organochlorine contaminants in soil, sediment, and fish in Bikini and Enewetak Atolls of the Marshall Islands, Pacific Ocean

Several nuclear tests were performed at Enewetak and Bikini Atolls in the Marshall Islands between 1946 and 1958. The events at Bikini Atoll involved several ships that were tested for durability during nuclear explosions, and 24 vessels now rest on the bottom of the Bikini lagoon. Nine soil samples were collected from different areas on the two islands of the atoll, and eighteen sediment, nine fish, and one lobster were collected in the vicinity of the sunken ships. Organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and polychlorinated terphenyls (PCTs) in these samples were analyzed using gas chromatography/ion trap mass spectrometry (GC/ITMS). The average recoveries ranged from 78% to 104% for the different PCB congeners. The limits of detection (LOD) for PCBs, PCTs, DDE, DDT, and dieldrin ranged 10-50 pg g⁻¹. Some fish from Enewetak contained PCBs at a concentration range of 37-137 ng g⁻¹, dry weight (dw), and most of the soils from Enewetak showed evidence of PCBs (22-392 ng g⁻¹ dw). Most of the Bikini lagoon sediment samples contained PCBs, and the highest was the one collected from around the Saratoga, an aircraft carrier (1555 ng g⁻¹ dw). Some of the fish samples, most of the soil samples, and only one of the sediment samples contained 2,2-bis(4-chlorophenyl)-1,1-dichloroethylene (DDE) and PCBs. In addition to PCBs, the soils from Enewetak Atoll contained PCTs. PCTs were not detected in the sediment samples from Bikini Atoll. The results suggest local pollution sources of PCBs, PCTs, and OCPs.     

Phosphorus flows and use efficiencies in production and consumption of wheat, rice, and maize in China

Increasing fertilizer phosphorus (P) application in agriculture has greatly contributed to the increase of crop yields during the last decades in China but it has also increased P flows in food production and consumption. The relationship between P use efficiency and P flow is not well quantified at national level. In present paper we report on P flows and P use efficiencies in rice, wheat, and maize production in China using the NUFER model. Conservation strategies for P utilization and the impact of these strategies on P use efficiency have been evaluated. Total amounts of P input to wheat, rice, and maize fields were 1095, 1240, and 1128 Gg, respectively, in China, approximately 80% of which was in chemical fertilizers. The accumulation of P annually in the fields of wheat, rice, and maize was 29.4, 13.6, and 21.3 kg ha⁻¹, respectively. Phosphorus recovered in the food products of wheat, rice, and maize accounted for only 12.5%, 13.5%, and 3.8% of the total P input, or 3.2%, 2.6%, and 0.9% of the applied fertilizer P, respectively. The present study shows that optimizing phosphorus flows and decreasing phosphorus losses in crop production and utilization through improved nutrient management must be considered as an important issue in the development of agriculture in China.     

Spatial and seasonal variations of atmospheric BTEX,sulfur dioxide,nitrogen dioxide,and ozone concentrations in Istanbul,and health risk assessment of BTEX

Volatile organic compounds (VOCs) such as benzene, toluene, ethylbenzene, and xylene (BTEX) along with inorganic gases such as sulfur dioxide (SO₂), nitrogen dioxide (NO₂), and ozone (O₃) levels were found in the atmosphere of the Kemerburgaz region where environmental issues became a major concern due to nearby incineration plant and waste disposal facility in Istanbul. Ten sampling locations were selected considering possible sources in the study area. The sampling areas were classified as suburban, industrial, rural, and background regions. Sampling campaigns were carried out for four-week periods from March 2011 to August 2012 in all locations. Elevated concentrations of BTEX around roads and the industrial locations indicated that vehicle exhaust and industrial activities were the main sources of these pollutants in the region. Concentrations of NO₂ were also high around roads. A much more uniform distribution was observed for SO₂ during sampling periods. However higher levels were observed at suburban locations due to the use of coal for local heating especially during winter. Ozone concentrations were low at the industrial locations and roadsides, but high in suburban and rural locations downwind from the sources. The results of these organic and inorganic gases meet the national limit values. Furthermore, a lifetime risk assessment methodology was used to evaluate the potential adverse health effects of BTEX. The mean cancer risk level for benzene was estimated to be 7.71E-07 that is lower than assigned acceptable risk level of 1.0E-04. Toluene, ethylbenzene, and xylenes were lower than the specified level of 1.0 with respect to mean non-carcinogenic risks. The findings reveal that determined BTEX emissions do not pose a health threat to residents in the studied region.     

Contrasting Patterns of Urban Expansion in Colombia, Ecuador, Peru, and Bolivia Between 1992 and 2009

The global urban population is increasing rapidly, but patterns of urban expansion differ greatly among countries. Urban transition theory predicts that the shift from low to high urbanization depends on a country’s history and level of economic development. This study describes urban expansion in Colombia, Ecuador, Peru, and Bolivia between 1992 and 2009. Urban dynamics were analyzed by combining nighttime lights and census data from 4032 municipalities. High-lit areas (>52–63 pixel values) were correlated with urban populations across municipalities and years (R ² > 0.90). Analyses showed that between 1992 and 2009 Bolivia and Ecuador had rapid population growth and rapidly increasing high-lit areas, while Peru and Colombia had lower rates of population growth and urbanization (i.e., expansion of high-lit areas). We demonstrate how nighttime lights can be a useful tool, providing a homogeneous platform for multi-scale analyses of urban growth.