Removal of tetrafluoroborate ion from aqueous solution using magnesium-aluminum oxide produced by the thermal decomposition of a hydrotalcite-like compound

Magnesium-aluminum oxide (Mg-Al oxide) prepared by the thermal decomposition of a hydrotalcite-like compound was found to have potential for treating NaBF(4) wastewater. The Mg-Al oxide removed the BF(4)(-) and F(-) and H(3)BO(3) from the NaBF(4) solution. With increasing Mg-Al oxide quantity and time, the BF(4)(-) concentration decreased and the degree of BF(4)(-), F(-), and boron removal increased. The decrease in the BF(4)(-) concentration resulted from uptake by the Mg-Al oxide and not hydrolysis. The Mg-Al oxide took up F(-) from the solution preferentially. The Mg-Al oxide also converted the H(3)BO(3) in the aqueous solution into H(2)BO(3)(-), which it took up.     

Mg—Al水滑石对偶氮染料活性艳红X-3B的脱色性能研究

采用共沉淀法合成出一系列镁铝摩尔比不同的碳酸根型水滑石（LDHs）,经500℃高温煅烧制备出镁铝复合氧化物CLDH,并用X-射线、红外光谱对它们进行表征。考查了吸附剂投加量、反应时间、初始pH值等因素对LDHs和CLDH处理阴离子染料活性艳红X-3B模拟废水效果的影响,并对吸附机理进行探讨。实验结果表明：以镁铝摩尔比为3：1时制得的水滑石对活性艳红X-3B溶液的脱色效果最好。水滑石LDHs及其焙烧产物CLDH对活性艳红X-3B染料均具有较好的吸附性能,最佳反应时间分别为60min和30min;在较宽的pH范围内二者的脱色性能稳定,且CLDH对该染料的吸附效果要优于LDHs。LDHs及CLDH对活性艳红X-3B的吸附结果符合Langmuir吸附等温式,25℃下饱和吸附量分别为263．77mg／g和875．23mg／g。LDHs及CLDH的吸附机理分别为离子交换和层状结构重建。饱和吸附后的CLDH用高温热解法再生,吸附性能良好,随再生次数增多,脱色率下降。     

Modeling the competitive effect of phosphate, sulfate, silicate, and tungstate anions on the adsorption of molybdate onto goethite

The mobility of Mo in soils and sediments depends on several factors including soil mineralogy and the presence of other oxyanions that compete with Mo for the adsorbent's retention sites. Batch experiments addressing Mo adsorption onto goethite were conducted with phosphate, sulfate, silicate, and tungstate as competing anions in order to produce competitive two anions adsorption envelopes, as well as competitive two anions adsorption isotherms. Tungstate and phosphate appear to be the strongest competitors of Mo for the adsorption sites of goethite, whereas little competitive effects were observed in the case of silicate and sulfate. Mo adsorption isotherm from a phosphate solution was similar to the one from a tungstate solution. The charge distribution multi-site complexation (CD-MUSIC) model was used to predict competitive adsorption between MoO(4)(2-) and other anions (i.e., phosphate, sulfate, silicate and tungstate) using model parameters obtained from the fitting of single ion adsorption envelopes. CD-MUSIC results strongly agree with the experimental adsorption envelopes of molybdate over the pH range from 3.5 to 10. Furthermore, CD-MUSIC prediction of the molybdate adsorption isotherm show a satisfactory fit of the experimental results. Modeling results suggest that the diprotonated monodentate complexes, FeOW(OH)(5)(-0.5) and FeOMo(OH)(5)(-0.5), were respectively the dominant complexes of adsorbed W and Mo on goethite 110 faces at low pH. The model suggests that Mo and W are retained mainly by the formation of monodentate complexes on the goethite surface. Our results indicate that surface complexation modeling may have applications in predicting competitive adsorption in more complex systems containing multiple competing ions.     

Cellulose supported layered double hydroxides for the adsorption of fluoride from aqueous solution

Cellulose supported layered double hydroxides (CSLDHs) were synthesized and tested for adsorption of fluoride in aqueous medium. Three samples of cellulose supported LDHs were synthesized by varying the LDH loading on cellulose. The raw cellulose, unsupported LDH and cellulose supported LDHs were characterized by XRD, SEM and BET surface area. Batch adsorption as well as fixed-bed column experiments were performed for determining the fluoride adsorption characteristics of CSLDHs. The fluoride adsorption properties of CSLDHs were found to be superior to that of reported adsorbents, including activated alumina and carbon nanotubes. Defluoridation capacity of the CSLDHs was 2-4 times higher than that of unsupported LDH. The cellulose supported LDH, CSLDH-50, having an LDH loading of 27% showed maximum fluoride uptake capacity (5.29 mg g(-1) of CSLDH, 25.18 mg g(-1) of LDH) in fixed-bed column study.     

焙烧态锂铝水滑石对水中氟离子吸附性能研究

采用尿素水热法合成了不同摩尔比的锂铝水滑石(Li/Al LDHs),经480℃煅烧后制备出焙烧态锂铝水滑石(Li/AlLDOs)。研究了Li/Al LDOs对水中氟离子的吸附性能,分别考察了吸附时间、吸附温度和pH等因素对吸附效果的影响,并对吸附机制进行了探讨。结果表明,Li/Al LDOs吸附水中氟离子的行为符合准二级动力学方程,吸附等温数据符合Freundlich吸附等温方程,pH对吸附效果影响较大。X射线衍射分析表明,水滑石样品经历了物相转变及重构过程,Li/Al LDOs可有效去除水体中的氟离子。     

The interaction of boron with goethite: experiments and CD-MUSIC modeling

Boron (B) is an essential element for plants and animals growth that interacts with mineral surfaces regulating its bioavailability and mobility in soils, sediments, and natural ecosystems. The interaction with mineral surfaces is quite important because of a narrow range between boron deficiency and toxicity limits. In this study, the interaction of boric acid with goethite (α-FeOOH) was measured in NaNO₃ background solution as a function of pH, ionic strength, goethite and boron concentration representing as adsorption edges and isotherms. Boron adsorption edges showed a bell-shaped pattern with maximum adsorption around pH 8.50, whereas adsorption isotherms were rather linear. The adsorption data were successfully described with the CD-MUSIC model in combination with the Extended Stern (ES) model. The charge distribution (CD) of inner-sphere boron surface complexes was calculated from the geometry optimized with molecular orbital calculations applying density functional theory (MO/DFT). The CD modeling suggested dominant binding of boric acid as a trigonal inner-sphere complex with minor contributions of a tetrahedral inner-sphere complex (at high pH) and a trigonal outer-sphere complex (at low pH). The interpretation with the CD model is consistent with the spectroscopic observations.     

人工湿地基质的筛选及其对猪场废水厌氧消化液中氨氮吸附性能研究

采用静态吸附实验,对比了岷江砂、沱江砂、青衣江砂、沸石、活性炭对猪场废水厌氧消化液中氨氮的吸附去除效率,基于氨氮去除能力、购买成本与运费的比较,筛选出性价比较高的基质--岷江砂作为四川地区人工湿地的基质处理猪场废水厌氧消化液.吸附实验表明,砂对氨氮的去除率随振荡时间和投加量的增加而增加.通过吸附等温曲线Langmuir...     

改性钙铝LDH对水中硝基苯和萘的吸附

为了解经十二烷基硫酸钠（SDS）改性的钙铝LDH作为吸附剂吸附水体中硝基苯和萘的吸附性能,结合有机钙铝LDH的结构特征和有机质含量,对有机改性前后钙铝LDH分别对硝基苯、萘的动力学和等温吸附线进行了研究。探讨了其吸附机理。结果表明,有机钙铝LDH层间距为3．25nm,有机质含量约为45％。提出了有机改性后的钙铝LDH对硝基苯和萘的吸附率增强,且萘的吸附效率高于硝基苯;有机钙铝LDH对非离子型有机污染物的吸附作用机理主要为分配作用。     

Adsorption of Acid Red 73 on copper dithiocarbamate precipitate-type solid wastes

Three solid wastes, copper N,N'-bis(dithiocarboxy)piperazine ([CuBDP](n)), copper diethyldithiocarbamate (Cu(DDTC)(2)) and copper dimethyldithiocarbamate (Cu(DMTC)(2)), were prepared and tested as adsorbents to remove Acid Red 73 from wastewater. It was found that the three precipitates all could effectively adsorb the dye but their adsorption abilities were rather different. The maximum adsorption amounts of the coordination polymer precipitate [CuBDP](n) reached as high as 364mg g(-1), much greater than those of Cu(DDTC)(2) and Cu(DMTC)(2) (42.9 and 37.8mg g(-1), respectively). The investigation of adsorption models showed these adsorption processes followed the pseudo-second-order kinetic equation and the adsorption balances could be described with both Langmuir and Freundlich isotherms, but the latter seemed to be more suitable. Their adsorption nature was inferred to be physical adsorption and mainly depended on the hydrophobic interaction between these precipitates and Acid Red 73. This is the first example for the reutilization of metal dithiocarbamate precipitates as solid wastes to date.     

Attempt to adsorb N-nitrosamines in solution by use of zeolites

The strong adsorption of zeolite for N-nitrosamines in solution was first revealed by use of adsorption, and temperature programmed surface reaction (TPSR) techniques. N-nitrosodimethylamine (NDMA) and N-nitrosopyrrolidine (NPYR) as well as N-nitrosohexamethyleneimine (NHMI) can be adsorbed on zeolite Y, ZSM-5 and A in the solution of methylene chloride or water, which will be helpful for removal of the N-nitrosamines pollution in environmental protection. The equilibrium data were fitted to Freundlich-type isotherms, but the adsorption capacity of zeolites mainly depended on their pore size, surface area and acid-basic properties. Molecular size of adsorbate and solute-solvent interaction also strongly affected the adsorption of N-nitrosamines on zeolite in solution. The extraordinary adsorption properties of NaA zeolite for N-nitrosamines in aqueous solution is first reported and discussed.     

煅烧的水滑石同时去除水体中砷和氟

为探讨水滑石类材料对水体中氟、砷离子的同时去除效果,采用共沉淀法合成(Mg∶Al=2∶1)纳米类水滑石(LDHs),用傅立叶转换红外光谱、电子扫描透射电镜、X射线晶体衍射等手段对合成的材料进行了表征,并研究纳米材料在不同初始浓度、pH、吸附时间、阴离子干扰条件下其同时除砷氟性能。结果表明,煅烧后的水滑石(LDOs)对砷最大吸附量为51.02 mg/g,对氟最大吸附量为36.63 mg/g。吸附动力学实验表明,煅烧水滑石对砷的吸附在前6 h内基本完成,对氟的吸附在前10 h内基本完成。砷氟共存溶液保持pH=4~10及pH=6~8时,水滑石分别对砷、氟保持良好的吸附效率。对比不同阴离子对水滑石共除砷氟效率的影响,水滑石除砷速率受到阴离子影响力大小为:HPO2-4CO2-3NO-3Cl-SO2-4;水滑石除氟速率受到阴离子影响力大小为:CO2-3HPO2-4SO2-4Cl-NO-3。材料再生循环利用4次后,对砷和氟的吸附效率均能达到90%以上。实验结果表明,所合成的水滑石是一种优秀的能共除砷氟的吸附剂。     

Arsenic(V) removal with a Ce(IV)-doped iron oxide adsorbent

The removal of arsenic(V) by a new Ce-Fe adsorbent was evaluated under various conditions. Under an initial As(V) of 1.0 mg l(-1), the adsorption capacity of the Ce-Fe absorbent was constant around a value of 16 mgg(-1) over a wide pH range (3-7), while a maximum adsorption capacity of 8.3 mgg(-1) was obtained over a narrow pH range around 5.5 for activated alumina, a conventional adsorbent. Kinetics of adsorption obeys a pseudo-first-order rate equation with the rate constant K(ad) as 1.84 x 10(-3) min(-1). The pattern of adsorption of As(V) by the adsorbent fitted well both the Langmuir and Freundlich models. A Langmuir Q(0) of 70.4 mgg(-1) was obtained at an initial pH of 5.0 and temperature of 20 degrees C, significantly higher than those of other adsorbents reported. Phosphate seriously inhibited the removal of As(V) while fluoride did not compete with As(V) even at an F/As molar ratio as high as 30, suggesting that the adsorption sites for As(V) and fluoride were different. Salinity, hardness, and other inorganic anions such as Cl(-), NO(3)(-), and SO(4)(2-) had no apparent effect on As(V) adsorption. Fourier transform infrared spectra of Ce-Fe adsorbent before and after As(V) adsorption demonstrated that M-OH groups plays an important role for As(V) ions removal in the adsorption mechanisms of Ce-Fe adsorbent.     

褐煤对废水中酸性红B的吸附去除

选用褐煤作为廉价吸附剂,脱除模拟废水中染料酸性红B。研究了褐煤对废水中酸性红B的吸附动力学、等温吸附模式,考察了pH、褐煤投加量以及离子强度(NaCl)对吸附效果的影响。结果表明,吸附动力学较好地符合准二级速率方程(R2=1.000),并且以化学吸附为主;吸附等温式满足Langmuir方程(R2=0.986),最大单分子层吸附量为42 mg/g;废水中染料的去除率随溶液pH的减小而明显增加,在pH=1时,去除效果最好,证实吸附过程存在静电吸引及化学键合;在一定条件下,溶液中酸性红B的去除率随褐煤投加量增加而增加;吸附效果随溶液中离子强度(NaCl)的增加而增强。说明褐煤可以作为一种廉价吸附材料,用于处理含染料废水。     

Low-cost adsorbent prepared from sewage sludge and corn stalk for the removal of COD in leachate

Sewage sludge (SS) with corn stalk (CS) was used to prepare SS-based activated carbon (SAC) by pyrolysis with ZnCl₂. The effects of mixing ratio on surface area and pore size distribution, elemental composition, surface chemistry, and morphology were investigated. The results demonstrated that the addition of CS into SS samples improved the surface area (from 92 to 902 m²/g) and the microporosity (from 1.2 to 4.1 %) of the adsorbents and, therefore, enhancing the adsorption performance. The removal of leachate chemical oxygen demand (COD) was also determined. It was found that the COD removal rate reached 85 % at pH 4 with the SAC (90 wt% CS) dosage of 2 % (g/mL) and an adsorption time of 40 min. The adsorption experimental data were fitted by both Langmuir and Freundlich adsorption isotherms. Long-chain alkanes and refractory organics were found in raw leachate, but could be removed by SAC largely.     

Hydrotalcites and organo‐hydrotalcites as sorbents for removing pesticides from water

Abstract

This paper reports on the adsorption of different organic pesticides by hydrotalcite, hydrotalcite heated to 500°C and organo‐hydrotalcite in aqueous medium by employing adsorption isotherms, and using X‐ray diffraction and infrared spectroscopy techniques. The results suggest that the adsorption capacity of the different materials depends on their nature as well as on the structure, polarity and hydrophobic or anionic nature of the pesticides. The results also show that hydrotalcite, both natural and after calcination at 500°C, is not a good sorbent of hydrophobic pesticides. The data demonstrated that both types of hydrotalcite, however, are very good sorbents of glyphosphate. Furthermore, the organo‐hydrotalcites may be as good sorbents as organo‐montmorillonites for hydrophobic pesticides.     

Mg/Al/Fe复合氧化物吸附去除水体中氟化物的研究

采用水热法合成了不同铁掺杂量的Mg/Al/Fe型类水滑石(MAF),根据X射线衍射(XRD)的测定结果,铁存在一个最佳投加量,铁的掺杂量过大则会导致水滑石的层状结构被破坏。通过扫描电镜(SEM)和比表面分析仪(BET)研究了MAF焙烧后的复合金属氧化物(CMAF)的结构和性能,并考察了CMAF对水中氟离子的吸附性能。与CMA相比(铁掺杂量为零),CMAF对氟离子的吸附去除效率明显提高(最大吸附容量75.2 mg/g),整个吸附过程可以用Langmuir吸附等温线更好地描述。通过XRD测定和晶格参数计算,CMAF的结构由吸附前的复合氧化物恢复到层状水滑石结构,表明氟离子在水滑石重构过程中作为层间阴离子进入到水滑石内部,从而达到较高的除氟效率。     

Adsorption characteristics of pesticides methamidophos and glyphosate by two soils

Contributions of organic matter and minerals in soil were evaluated by comparing changes in adsorption of methamidophos (MDP) and glyphosate (GPS) before and after removal of organic matter from argaltoll (mollisol) and typustalf (alfisol) soils. Adsorption isotherms of MDP and GPS by the two soils comforted to Freundlich equation, and the adsorption capacity of GPS by argaltoll soil was higher than that of MDP. Due to the removal of organic matter from soils, K(f) values of MDP and GPS adsorbed by argaltoll soil, which were calculated from Freundlich equations and the measure of adsorption capacity, decreased by 46.1% and 75.0%, and these by typustalf soil decreased by 34.9% and 52.5%, respectively. Results from this study suggested that soil organic matter made greater contributions to adsorption of GPS, but soil minerals could provide more available adsorption sites for MDP.     

人工湿地基质对NH4＋-N吸附性能

为研究建筑废物红砖和工业废物煤渣用作人工湿地脱氮基质的可行性,分别通过静态吸附实验和动态NHf—N去除效果实验进行考察。结果表明,红砖和煤渣对NH4＋-N最大静态吸附量分别为0．2533mg／g和0．0533mg／g,其吸附等温曲线均符合Freundlich型吸附方程,吸附常数分别为0．0419和0．0091;红砖煤渣组合对污水中NH4＋-N平均动态脱除率达到41．18％,高于红砖的37．63％和煤渣的30．92％。     

Removal of congo red from aqueous solution by bagasse fly ash and activated carbon: kinetic study and equilibrium isotherm analyses

Present investigation deals with the utilisation of bagasse fly ash (BFA) (generated as a waste material from bagasse fired boilers) and the use of activated carbons-commercial grade (ACC) and laboratory grade (ACL), as adsorbents for the removal of congo red (CR) from aqueous solutions. Batch studies were conducted to evaluate the adsorption capacity of BFA, ACC and ACL and the effects of initial pH (pH(0)), contact time and initial dye concentration on adsorption. The pH(0) of the dye solution strongly affected the chemistry of both the dye molecules and BFA in an aqueous solution. The effective pH(0) was 7.0 for adsorption on BFA. Kinetic studies showed that the adsorption of CR on all the adsorbents was a gradual process. Equilibrium reached in about 4h contact time. Optimum BFA, ACC and ACL dosages were found to be 1, 20 and 2 g l(-1), respectively. CR uptake by the adsorbents followed pseudo-second-order kinetics. Equilibrium isotherms for the adsorption of CR on BFA, ACC and ACL were analysed by the Freundlich, Langmuir, Redlich-Peterson, and Temkin isotherm equations. Error analysis showed that the R-P isotherm best-fits the CR adsorption isotherm data on all adsorbents. The Freundlich isotherm also shows comparable fit. Thermodynamics showed that the adsorption of CR on BFA was most favourable in comparison to activated carbons.