Aromatic hydrocarbon growth from indene

Aromatic hydrocarbon growth from indene (C9H8), which contains the five-membered ring cyclopentadienyl moiety, was investigated experimentally in a 4 s flow reactor over a temperature range 650-850 degrees C. Major products observed were three C18H12 isomers (chrysene, benz[a]anthracene and benzo[c]phenanthrene), two C17H12 isomers (benzo[a]fluorene and benzo[b]fluorene), and two C10H8 isomers (naphthalene and benzofulvene). Reaction pathways to these products are proposed. Indenyl radical addition to indene produces a resonance-stabilized radical intermediate which further reacts by one of two routes. Rearrangement by intramolecular addition produces a bridged structure that leads to the formation of C17H12 and C10H8 products. Alternatively, beta scission produces biindenyl, which leads to the formation of C18H12 products by a ring condensation mechanism analogous to that proposed for cyclopentadiene-to-naphthalene conversion. Temperature dependencies of both the partitioning between these two routes and the product isomer distributions are consistent with thermochemical modeling using semi-empirical molecular orbital methods. The results further illustrate the role of resonance-stabilized radical rearrangement in aromatic growth and condensation of systems with cyclopentadienyl moieties.     

Formation characteristics of aerosol particles from pulverized coal pyrolysis in high-temperature environments

The formation characteristics of aerosol particles from pulverized coal pyrolysis in high temperatures are studied experimentally. By conducting a drop-tube furnace, fuel pyrolysis processes in industrial furnaces are simulated in which three different reaction temperatures of 1000, 1200, and 1400 degrees C are considered. Experimental observations indicate that when the reaction temperature is 1000 degrees C, submicron particles are produced, whereas the particle size is dominated by nanoscale for the temperature of 1400 degrees C. Thermogravimetric analysis of the aerosol particles stemming from the pyrolysis temperature of 1000 degrees C reveals that the thermal behavior of the aerosol is characterized by a three-stage reaction with increasing heating temperature: (1) a volatile-reaction stage, (2) a weak-reaction stage, and (3) a soot-reaction stage. However, with the pyrolysis temperature of 1400 degrees C, the volatile- and weak-reaction stages almost merge together and evolve into a chemical-frozen stage. The submicron particles (i.e., 1000 degrees C) are mainly composed of volatiles, tar, and soot, with the main component of the nanoscale particles (i.e., 1400 degrees C) being soot. The polycyclic aromatic hydrocarbons (PAHs) contained in the aerosols are also analyzed. It is found that the PAH content in generated aerosols decreases dramatically as the pyrolysis temperature increases.     

Mechanisms of molecular product and persistent radical formation from the pyrolysis of hydroquinone

Hydroquinone is considered to be one of the major, potential molecular precursors for semiquinone-type radicals in the combustion of complex polymeric and oligomeric structures contained in biomass materials. Comprehensive product yield determinations from the high-temperature, gas-phase pyrolysis of hydroquinone in two operational modes (rich and lean hydrogen conditions) are reported at a reaction time of 2.0s over a temperature range of 250-1000 degrees C. Below 500 degrees C, p-benzoquinone is the dominant product, while at temperatures above 650 degrees C other products including phenol, benzene, styrene, indene, naphthalene, biphenylene, phenylethyne, dibenzofuran and dibenzo-p-dioxin are formed. Hydrogen-rich conditions initially inhibit hydroquinone decomposition (below 500 degrees C) but promote product formation at higher temperatures. The decomposition process apparently proceeds via formation of a resonance stabilized p-semiquinone radical. Detailed mechanisms of formation of stable molecular species as well as stable radicals are proposed.     

Biodegradation of organic pollutants in saline wastewater by halophilic microorganisms: a review

Agro-food, petroleum, textile, and leather industries generate saline wastewater with a high content of organic pollutants such as aromatic hydrocarbons, phenols, nitroaromatics, and azo dyes. Halophilic microorganisms are of increasing interest in industrial waste treatment, due to their ability to degrade hazardous substances efficiently under high salt conditions. However, their full potential remains unexplored. The isolation and identification of halophilic and halotolerant microorganisms from geographically unrelated and geologically diverse hypersaline sites supports their application in bioremediation processes. Past investigations in this field have mainly focused on the elimination of polycyclic aromatic hydrocarbons and phenols, whereas few studies have investigated N-aromatic compounds, such as nitro-substituted compounds, amines, and azo dyes, in saline wastewater. Information regarding the growth conditions and degradation mechanisms of halophilic microorganisms is also limited. In this review, we discuss recent research on the removal of organic pollutants such as organic matter, in terms of chemical oxygen demand (COD), dyes, hydrocarbons, N-aliphatic and N-aromatic compounds, and phenols, in conditions of high salinity. In addition, some proposal pathways for the degradation of aromatic compounds are presented.     

Synthesis of zirconia-immobilized copper chelates for catalytic decomposition of hydrogen peroxide and the oxidation of polycyclic aromatic hydrocarbons

Chelating sorbents with diethylenetriaminepenta(methylene-phosphonic acid) (DTPMPA) and ethylenediaminetetraacetic acid ligands immobilized on zirconia matrix were prepared and subsequently saturated with Cu(II). All the Cu chelates catalyzed decomposition of H(2)O(2) yielding highly reactive hydroxyl radicals. All of them were also able to catalyze degradation of polycyclic aromatic hydrocarbons (anthracene, benzo[a]pyrene and benzo[b]fluoranthene). The most effective DTPMPA-based catalysts G-32 and G-35 (10 mg ml(-1) with 100 mmol H(2)O(2)) caused almost complete decomposition of 15 ppm anthracene and benzo[a]pyrene during a five day catalytic cycle at 30 degrees C. Anthracene-1,4-dione was the main product of anthracene oxidation by all catalysts. The catalysts were active in several cycles without regeneration.     

Naphthalene metabolism in Nocardia otitidiscaviarum strain TSH1, a moderately thermophilic microorganism

The thermophilic bacterium Nocardia otitidiscaviarum strain TSH1, originally isolated in our laboratory from a petroindustrial wastewater contaminated soil in Iran, grows at 50 degrees C on a broad range of hydrocarbons. Transformation of naphthalene by strain TSH1 which is able to use this two ring-polycyclic aromatic hydrocarbon (PAH) as a sole source of carbon and energy was investigated. The metabolic pathway was elucidated by identifying metabolites, biotransformation studies and monitoring enzyme activities in cell-free extracts. The identification of metabolites suggests that strain TSH1 initiates its attack on naphthalene by dioxygenation at its C-1 and C-2 positions to give 1,2-dihydro-1,2-dihydroxynaphthalene. The intermediate 2-hydroxycinnamic acid, characteristic of the meta-cleavage of the resulting diol was identified in the acidic extract. Apart from typical metabolites of naphthalene degradation known from mesophiles, benzoic acid was identified as an intermediate for the naphthalene pathway of this Nocardia strain. Neither phthalic acid nor salicylic acid metabolites were detected in culture extracts. Enzymatic experiments with cell extract showed the catechol 1,2-dioxygenase activity while transformation of phthalic acid and protocatechuic acid was not observed. The results of enzyme activity assays and identification of benzoic acid in culture extract provide strong indications that further degradation goes through benzoate and beta-ketoadipate pathway. Our results indicate that naphthalene degradation by thermophilic N. otitidiscaviarum strain TSH1 differs from the known pathways found for the thermophilic Bacillus thermoleovorans Hamburg 2 and mesophilic bacteria.     

Pyrolysis of humic acids from digested and composted sewage sludge

Humic acids (HAs) were extracted from four digested sewage sludge samples composted for four months, one, two and four years. HAs were pyrolyzed at three different temperatures applying both conventional and in situ methylation (ISM) pyrolysis. The pyrolysates were analyzed using gas chromatography-mass spectrometry (GC/MS). Derivatization (ISM) and pyrolysis temperature had dramatic effects on the composition and relative amounts of the pyrolysates. Among the derivatized HA fragments aliphatic compounds prevailed under all the pyrolysis conditions tested. Aromatic substances consisting mainly of guaiacyl-type compounds were detected in higher abundances only at elevated temperatures. Without ISM the contribution of aromatic structures to the total pyrogram was considerably greater than that of the aliphatics. Increase of the pyrolysis temperature from 450 degrees C to 600 degrees C had smaller effect on the proportions and composition of the compounds studied than increase from 350 degrees C to 450 degrees C.     

A modeling evaluation of the effect of chlorine on the formation of particulate matter in combustion

The effect of chlorine on the fuel-rich oxidation of hydrocarbons and on the molecular weight growth of aromatics is analyzed by simulating experiments featuring a model chlorinated additive CH3Cl in a jet-stirred/plug-flow reactor and premixed flames. The kinetic model used in this work emphasizes the role of resonantly stabilized radicals in the formation and growth of aromatics, and considers soot inception as the net effect of molecular weight growth and graphitization of aromatic structures. Chlorinated hydrocarbons decompose at temperatures significantly lower than hydrocarbons, producing reactive Cl-atoms, which have a strong tendency to go to HCl. The HCI, tying up the H-atoms, inhibits hydrocarbon oxidation. The model is able to predict not only the levels but the shape of the experiments quite well and also the surprising finding of an increased soot formation associated with lower PAH levels found in rich flames with significant levels of chlorine. Based on reaction kinetic analysis, chlorine addition to the fuel enhances soot formation by promoting the formation of aromatic-ring compounds and accelerating the abstraction of aromatic H-atoms from stable PAH molecules. This process activates the transformation of aromatics to soot.     

Combined application of non-discriminated conventional pyrolysis and tetramethylammonium hydroxide-induced thermochemolysis for the characterization of the molecular structure of humic acid isolated from polluted sediments from the Ravenna Lagoon

Humic acid (HA) isolated from highly polluted sediment from the Ravenna Lagoon (Italy) was subjected to pyrolysis/tetramethylammonium hydroxide (TMAH)-induced thermochemolysis to reveal the impact of industrial activities on humification. Special effort was made to distinguish between analytes originating from the polymeric humic organic matter network along with sequestered compounds (which cannot be released by solvent extraction), and the solvent-extractable lipid fraction sorbed onto the organic matrix. Exhaustive solvent extraction of the isolated HA proved mandatory to avoid biased results when identifying the origin of the pyrolyzates of untreated samples. Conventional pyrolysis at 750 degrees C of the "degreased" HA revealed a characteristic polycyclic aromatic hydrocarbon (PAH) pattern, which was significantly different than patterns obtained from the pyrolysis of natural humic acids. TMAH-induced thermochemolysis at 500 degrees C provided information on carboxylic acids covalently bound inside the HA network via ester bonds. Thermochemolysis of the "degreased" matrix at 750 degrees C, resulting in the cleavage of C-O and C-C bonds, revealed a significant PAH pattern very similar to that obtained by conventional pyrolysis. The uncommon PAH pattern points to the formation of bound residues as the humification/detoxification pathway. Recalcitrant hopane hydrocarbons showed very similar patterns for both the untreated and exhaustively solvent-extracted samples, which points to hopanes being linked inside the humic network via C-C bonds. The technique of non-discriminating flash pyrolysis used in this study, based on extremely rapid capacitive discharge heating in a Silcosteel capillary, proved to be an excellent method to obtain high-boiling pyrolyzates (PAHs beyond 252Da molecular weight, C(29)-C(31)-hopanes).     

Sonolytic reactions of phenanthrene in organic extraction solutions

Ultrasonic extraction is a common method used to extract semi-volatile and nonvolatile organic compounds such as polycyclic aromatic hydrocarbons (PAHs) from solid matrices. However, ultrasonic energy has been suspected to lead to undesired reactions of the solute and thus affect qualitative and quantitative results. In this paper, sonolytic reactions of phenanthrene in common organic extraction solutions were examined using a 20 kHz ultrasonic probe under conditions commonly used for ultrasonic extraction. Extraction parameters including phenanthrene concentration, solvent type, pulse length, and sonication time were investigated. Hexane:acetone (1:1 V/V) resulted in less phenanthrene degradation than dichloromethane (DCM):acetone (1:1 V/V). Initial solute concentration, length of sonication time, and solvent type affected the degradation of phenanthrene. Reaction byproducts including methylphenanthrene and methylnaphthalene detected after sonication indicate that phenanthrene reacts by both direct pyrolysis and reaction with methyl or ethyl radicals formed from solvent pyrolysis.     

Mechanisms of product formation from the pyrolytic thermal degradation of catechol

Catechol has been identified as one of the most abundant organic products in tobacco smoke and a major molecular precursor for semiquinone type radicals in the combustion of biomass material. The high-temperature gas-phase pyrolysis of catechol under hydrogen-rich and hydrogen-lean conditions was studied using a fused-silica tubular flow reactor coupled to an in-line GC/MS analytical system. Thermal degradation of catechol over temperature range of 250-1000 degrees C with a reaction time of 2.0s yielded a variety products including phenol, benzene, dibenzofuran, dibenzo-p-dioxin, phenylethyne, styrene, indene, anthracene, naphthalene, and biphenylene. Ortho-benzoquinone which is typically associated with the presence of semiquinone radicals was not observed and is proposed to be the result of fast decomposition reactions that lead to a variety of other reaction products. This is in contrast to the decomposition of hydroquinone that produced para-benzoquinone as the major product. A detailed mechanism of the degradation pathway of catechol is proposed.     

Enhanced naphthalene solubility in the presence of sodium dodecyl sulfate: effect of critical micelle concentration

Surfactants can increase the solubility of non-polar compounds, and have been applied in areas such as soil washing and treatment of non-aqueous phase liquids (NAPLs). This investigation explored the feasibility of removing vapor phase polycyclic aromatic hydrocarbon (PAH) from gases using an anionic surfactant. The solubility of vapor phase naphthalene was measured herein using gas chromatograph (GC) with a photon ionization detector (PID). The measurement results indicated that surfactant molecules were not favorable to micelle formation when temperatures increased from 25 degrees C to 50 degrees C. Regardless of whether solutions were quiescent or agitated, equilibrium naphthalene apparent solubility increased linearly with surfactant concentrations exceeding critical micelle concentration (CMC). The pH effects on naphthalene apparent solubility were small. Agitation increased naphthalene apparent solubility and lumped mass transfer coefficients. Furthermore, lumped mass transfer coefficients decreased with increasing surfactant concentration owing to increase in interfacial resistance and viscosity and decreased spherical micelle diffusion coefficients. Finally, the net absorption rate increased because the solubilization effects of micelles exceeded the reduction effects of mass transfer coefficient above the CMC. The enhanced naphthalene apparent solubility from the addition of surfactant can be expressed by an enrichment factor (EF). The EF value of naphthalene for the surfactant solution at 0.1 M with agitation at 270 rpm relative to quiescent water could reach 18.6. This work confirms that anionic surfactant can improve the removal efficiency of hydrophobic organic compound (HOC) from the gas phase.     

紫外光(UV)光解油田采出水中多环芳烃

为了探讨紫外光光解人工模拟油田采出水中多环芳烃的降解效率,利用自制反应装置对油田采出水中多环芳烃(PAHs)的紫外光光解做了一个初步研究。研究结果证明,紫外光光解对油田采出水中的多环芳烃萘和芴有显著的降解能力。实验室的测试表明,与紫外UVA(365 nm)、UVB(308 nm)的光照相比,紫外UVC(254 nm)在光照60 min的条件下,2种多环芳烃各自的去除率都近似达到了99%。可见,在光解效力和暴露时间两方面,紫外UVC对采出水中萘和芴的去除具有相对稳定和比较高的效率。     

Pyrolytic characteristics of sewage sludge

In this study, a number of different sewage sludge including sludge samples from industrial and hospital wastewater treatment plants were characterized for pyrolysis behavior by means of thermogravimetric analysis up to 800 degrees C. According to the thermogravimetric results, five different types of mass loss behaviors were observed depending on the nature of the sludge used. Typical main decomposition steps occurred between 250 and 550 degrees C although some still decomposed at higher temperatures. The first group (Types I, II and III) was identified by main decomposition at approximately 300 degrees C and possible second reaction at higher temperature. Differences in the behavior may be due to different components in the sludge both quantitatively and qualitatively. The second group (Types IV and V), which rarely found, has unusual properties. DTG peaks were found at 293, 388 and 481 degrees C for Type IV and 255 and 397 degrees C for Type V. Kinetics of sludge decomposition can be described by either pseudo single or multicomponent overall models (PSOM or PMOM). The activation energy of the first reaction, corresponding to the main pyrolysis typically at 300 degrees C, was rather constant (between 68 and 77 kJ mol(-1)) while those of second and third reactions were varied in the range of 85-185 kJ mol(-1). The typical order of pyrolysis reaction was in the range of 1.1-2.1. The pyrolysis gases were composed of both saturated and unsaturated light hydrocarbons, carbon dioxide, ethanol and chloromethane. Most products, however, evolve at a quite similar temperature regardless of the sludge type.     

The use of anthracene as a model compound in a comparative study of hydrous pyrolysis methods for industrial waste remediation

Polycyclic aromatic hydrocarbons are very stable compounds and tend to bioaccumulate in the environment due to their high degree of conjugation and aromaticity. Hydrous pyrolysis is explored as a technique for the treatment of industrial water containing PAH, using anthracene as a model compound. The reactivity of anthracene under a range of temperatures and durations are studied in this paper. Aliquots of 1.0-10.0 mg of anthracene in a range of 1.0-5.0 mL of H₂O are subjected to hydrous pyrolysis under varied conditions of temperature, reagents and duration. The conditions include oxidising systems comprising distilled water, hydrogen peroxide and Nafion-SiO₂ solid catalyst in water; and reducing systems of formic acid and formic acid/Nafion-SiO₂/Pd-C catalysts to assess a range of redox reaction conditions. Oxygen in air played a role in some of the reaction conditions. Pyrolysed products were identified and quantified by the use of Gas Chromatography-Mass Spectrometry (GC-MS). The major products were anthrone, anthraquinone, xanthone from oxidation; and multiple hydro-anthracene derivatives from reductive hydogenation. The nature of reaction conditions influenced the extent of anthracene degradation. The products formed are more reactive (less stable) as compared to anthracene the starting material and will therefore be less persistent in the environment.     

Analysis of polycyclic aromatic hydrocarbons in sediment reference materials by microwave-assisted extraction

The microwave-assisted extraction (MAE) of polycyclic aromatic hydrocarbons (PAHs) from harbor sediment reference material EC-1, marine sediment reference material HS-2 and PAH-spiked river bed soil was conducted. The extraction conditions for EC-1 were carried out at 70 degrees C and 100 degrees C under pressure in closed vessels with cyclohexane acetone (1:1), cyclohexane-water (3:1), hexane acetone (1:1), and hexane-water (3:1) for 10 min. A comparison between MAE and a 16-h Soxhlet extraction (SX) method showed that both techniques gave comparable results with certified values. MAE has advantages over the currently used Soxhlet technique due to a faster extraction time and lower quantity of solvent used. The consumption of organic solvent of the microwave method was less than one-tenth compared to Soxhlet.     

Formation and inhibition of chloroaromatic micropollutants formed in incineration processes

The formation pathways for chlorinated aliphatic and chlorinated aromatic compounds in technical incineration processes are reviewed. It is shown that acetylene is converted to chloroaromatic compounds including PCDD/F in a special flow reactor by catalytic activity of CuCl2 in the temperature regime of a post-combustion zone of technical incinerators. Mechanistic pathways begin with chlorination of acetylene. Dichloroacetylene is further condensed to C-4 and C-6 units. Hexachlorobenzene is the dominant aromatic compound and a likely precursor to chlorinated phenols and PCDD/F. Two specific mechanisms of formation of chlorinated aromatic compounds including PCDD/F have been advanced. Both mechanisms begin with the formation of dichloroacetylene from flame pyrolysis products like acetylene. Condensation of dichloroacetylene is mediated by copper species via metallacyclic intermediates and/or a catalytic cycle involving copper stabilized trichlorovinyl radicals. The final pathways of conversion of chlorinated benzenes to PCDD/F via chlorophenols are under active investigation.     

Formation of polycyclic aromatic hydrocarbon via gas phase benzyne

Gas phase benzyne generated from the high temperature pyrolysis of phthalic anhydride is reduced to benzene. This newly formed benzene is then free to react further with more benzyne to yield more complex aromatic hydrocarbons.     

Lethal and sublethal effects of naphthalene and 1,2-dimethylnaphthalene on naupliar and adult stages of the marine cyclopoid copepod Oithona davisae

Short-term (24 h) exposure experiments have been conducted to determine the effects of two environmental relevant polycyclic aromatic hydrocarbons (PAHs), naphthalene (NAPH) and dimethylnaphthalene (C2-NAPH), on the naupliar and adult stages of the marine cyclopoid copepod Oithona davisae. To resemble more realistic conditions, those exposure experiments were conducted under the presence of food. The naupliar stages evidenced lower tolerance to PAH exposure regarding narcotic and lethal effects than adults. Copepod feeding activity showed to be very sensitive to the presence of the studied PAHs, detrimental effects occurring at toxic concentrations ca. 2-3 fold lower than for narcotic effects. In addition we report PAH-mediated changes in cell size and growth rate of the prey item, the heterotrophic dinoflagellate Oxyrrhis marina, that could indirectly affect copepod feeding and help explain hormesis-like responses in our feeding experiments.     

In situ biodegradation determined by carbon isotope fractionation of aromatic hydrocarbons in an anaerobic landfill leachate plume (Vejen,Denmark)

Concentrations and isotopic compositions (13C/12C) of aromatic hydrocarbons were determined in eight samples obtained from the strongly anoxic part of the leachate plume downgradient from the Vejen Landfill (Denmark), where methanogenic, sulfate-reducing and iron-reducing conditions were observed. Despite the heterogeneous distribution of the compounds in the plume, the isotope fractionation proved that ethylbenzene and m/p-xylene were subject to significant biodegradation within the strongly anoxic plume. The isotope fractionation factors (alphaC) for the degradation of the m/p-xylene (1.0015) and ethylbenzene (1.0021) obtained from the field observations were similar to factors previously determined for the anaerobic degradation of toluene and o-xylene in laboratory experiments, and suggest that in situ biodegradation is one major process controlling the fate of these contaminants in this aquifer. The isotope fractionation determined for 1,2,4-trimethylbenzene and 2-ethyltoluene suggested in situ biodegradation; however, the isotopic composition did not correlate well with the respective concentration as expressed by the Rayleigh equation. Some other compounds (1,2,3-trimethylbenzene, o-xylene, naphthalene and fenchone) did not show significant enrichments in delta13C values along the flow path. The compound concentrations were too low for accurate isotope analyses of benzene, toluene, 1- and 2-methylnaphthalene, while interferences in the chromatography made it impossible to evaluate the isotopic composition for 4-ethyltoluene, 1,3,5-trimethylbenzene and camphor.In addition to demonstrating the potential of assessing isotopic fractionation as a means for documenting the in situ biodegradation of complex mixtures of aromatic hydrocarbons in leachate plumes, this study also illustrates the difficulties for data interpretation in complex plumes and high analytical uncertainties for isotope analysis of organic compounds in low concentration ranges.