A Preliminary Assessment of the Montréal Process Indicators of Air Pollution for the United States

Air pollutants pose a risk to forest health and vitality in the United States. Here we present the major findings from a national scale air pollution assessment that is part of the United States' 2003 Report on Sustainable Forests. We examine trends and the percent forest subjected to specific levels of ozone and wet deposition of sulfate, nitrate, and ammonium. Results are reported by Resource Planning Act (RPA) reporting region and integrated by forest type using multivariate clustering. Estimates of sulfate deposition for forested areas had decreasing trends (1994-2000) across RPA regions that were statistically significant for North and South RPA regions. Nitrate deposition rates were relatively constant for the 1994 to 2000 period, but the South RPA region had a statistically decreasing trend. The North and South RPA regions experienced the highest ammonium deposition rates and showed slightly decreasing trends. Ozone concentrations were highest in portions of the Pacific Coast RPA region and relatively high across much of the South RPA region. Both the South and Rocky Mountain RPA regions had an increasing trend in ozone exposure. Ozone-induced foliar injury to sensitive species was recorded in all regions except for the Rocky Mountain region. The multivariate analysis showed that the oak-hickory and loblolly-shortleaf pine forest types were generally exposed to more air pollution than other forest types, and the redwood, western white pine, and larch forest types were generally exposed to less. These findings offer a new approach to national air pollution assessments and are intended to help focus research and planning initiatives related to air pollution and forest health.     

Optimisation and application of the voltammetric technique for speciation of chromium in the Patos Lagoon Estuary—Brazil

The chemical speciation analysis of chromium in one of the most important South American Estuary was performed for the first time. Samples were collected in Patos Lagoon Estuary (Brazil) and were analysed by adsorptive cathodic stripping voltammetry, with the following analytical figures of merit: limit of detection, 0.1 nmol L(-1); precision RSD?=?3%, n?=?7; linearity, from limit of quantitation up to 20 nmol L(-1); and accuracy of 99.8%, expressed as recovery. No labile chromium forms were identified in samples, beside industries and a city were near the study area. It is pointed out a reverse correlation between total and non-active chromium and salinity, which could be explained by biogeochemical processes.     

Design and assembly of an experimental laboratory for the study of atmosphere–plant interactions in the system of fumigation chambers

A 5-day biochemical oxygen demand (BOD(5)) test has been used as the standard measurement of organic pollution in rivers worldwide. However, it may be argued that BOD is not a sufficient indicator of organic pollution when nitrogenous biochemical oxygen demand (NBOD) is present in water samples. In this study, BOD, NBOD, and carbonaceous biochemical oxygen demand (CBOD) of treated sewage effluent (TSE) were measured near at the discharge outlet of 3 sewage treatment plants (STPs) in Sakai, Itachi, and Kashio rivers in Central Japan. Additional measurements were conducted at one point upstream and two points downstream from the STP discharge points in the rivers. It was estimated that NBOD values in the TSE of Sakai River, Kashio River and Itachi River accounted for 54%, 69% and 18% of their BOD values, respectively. Respective NH4+ and NO2- concentrations were positively correlated with those of NBOD values in Sakai, Itachi, and Kashio rivers. The BOD loads from the TSE were estimated to be 2.2, 5.7, and 1.2 times higher than the CBOD loads in the Sakai, Itachi, and Kashio rivers, respectively. The variation of the portion of NBOD values of each TSE, as well as the ratios of CBOD to BOD loads, was attributed to the difference in each STP system. Consequently, the NH4+ and NO2- of TSE led to the increase of NBOD in the Sakai River basin.     

Modelling the Balance of Metals in the Amended Soil for the Case of ‘Atmosphere–Plant–Soil’ System

Changing the concepts of economic development and introducing new amendments can hardly decrease the accumulation in the soil of such pollutants as metals, remaining there for a long time. The predictive models for describing the balance of metals in the soil, which are based on the ‘atmosphere–plant–soil’ system and reflect the complicated physical–chemical nature of the metals’ migration, expressed by coefficients obtained in long-term observations in natural conditions, allow for evaluating long-term concentration of metals in the soil. The model BALANS evaluates self-purification of soil, taking into account the uptake of metals of aerogenic origin by the soil together with amendments, their physical–chemical migration and the type of microrelief determining its intensity as well as the absorbed biomass of plants and the removal of metals with crops. In this model, the half-period of metals’ washing out from the soil, found for the microrelief characteristic of low places, exceeds 200 years for Ni, Cr and Pb and makes 90 and 150 years for Zn and Cu, respectively.     

The reproduction of Enchytraeus sp.—technical improvement for the counting of juveniles

Soil-dwelling annelids of the genus Enchytraeus are used in ecotoxicology for testing of chemicals mixed in artificial soil or for testing of wastes and soils of unknown quality. ISO 16387 describes a method for determining the effects of substances or contaminated soils on survival and reproduction of Enchytraeus albidus or of the smaller species Enchytraeus buchholzi or Enchy-traeus crypticus. After the total test duration of 6 (or 4)?weeks, the juveniles hatched in the meantime are counted. There are several possible extraction techniques, which are always followed by counting the juveniles by hand, but none of them seems easy to handle. We proposed a new modification of the worm extraction method using flotation of fixed and stained juveniles followed by taking a photograph. The digital image of the juveniles is evaluated by computer processing. It makes the counting of juveniles much easier and less labor intensive.     

Remote-sensing-based analysis of landscape change in the desiccated seabed of the Aral Sea—a potential tool for assessing the hazard degree of dust and salt storms

With the recession of the Aral Sea in Central Asia, once the world’s fourth largest lake, a huge new saline desert emerged which is nowadays called the Aralkum. Saline soils in the Aralkum are a major source for dust and salt storms in the region. The aim of this study was to analyze the spatio-temporal land cover change dynamics in the Aralkum and discuss potential implications for the recent and future dust and salt storm activity in the region. MODIS satellite time series were classified from 2000–2008 and change of land cover was quantified. The Aral Sea desiccation accelerated between 2004 and 2008. The area of sandy surfaces and salt soils, which bear the greatest dust and salt storm generation potential increased by more than 36 %. In parts of the Aralkum desalinization of soils was found to take place within 4–8 years. The implication of the ongoing regression of the Aral Sea is that the expansion of saline surfaces will continue. Knowing the spatio-temporal dynamics of both the location and the surface characteristics of the source areas for dust and salt storms allows drawing conclusions about the potential hazard degree of the dust load. The remote-sensing-based land cover assessment presented in this study could be coupled with existing knowledge on the location of source areas for an early estimation of trends in shifting dust composition. Opportunities, limits, and requirements of satellite-based land cover classification and change detection in the Aralkum are discussed.     

A methodology for rapid assessment of the environmental status of the shallow aquifer of ��Tavoliere di Puglia�� (Southern Italy)

Anticipating the European Water Framework Directive (2000/60/EC), the Italian Government issued Legislative Decree n.152/99 which sets out rules for classifying the environmental status of national water bodies in order to achieve specific qualitative objectives by 2016. The most recent European Groundwater Directive (2006/118/EC), which was only recognized by Italy in early 2009 (Legislative Decree 30/09), requires such resources to be characterized from a qualitative standpoint and the risk of their being polluted by individual pollutants or groups of pollutants to be evaluated. This paper reports a simple methodology, based on easy-to-apply rules, for the rapid classification of groundwater, and the results of its application to the shallow aquifer of the plain of Tavoliere delle Puglie located in south Italy. Data collected during well-water monitoring campaigns carried out from 2002 to 2003 made it possible to assess the environmental status of the Tavoliere which, unfortunately, was found to be characterized by ??significant anthropic pressures on quality and/or quantity of groundwater and necessitating specific improvement actions??.     

A Preliminary Assessment of Montréal Process Indicators of Forest Fragmentation for the United States

As part of the U.S. 2003 National Report on Sustainable Forests, four metrics of forest fragmentation--patch size, edge amount, inter-patch distance, and patch contrast--were measured within 137744 non-overlapping 5625 ha analysis units on land-cover maps derived from satellite imagery for the 48 conterminous States. The perimeter of a typical forest patch is about 100 m from the perimeter of its nearest neighbor, except when there is not much forest, in which case that distance is 200 to 300 m. A typical analysis unit has from 10 to 40% as much forest edge as it could possibly have, given the amount of forest present. Most analysis units contain a large number of patches that are less than one hectare in size, and about 10% contain one or more 2000 to 5000 ha patches. Forest often defines the background landscape, and patch contrast is generally either very high or very low in eastern regions and intermediate in western regions. Many research needs were identified by this experimental analysis of available data and metrics.     

Correcting the carbon cycle representation: How important is it for the economics of climate change?

Economic analyses of the greenhouse effect are typically carried out within the framework of computable general equilibrium models which represent the climate system by simple two box proxies based upon the pioneering work of Nordhaus. Since errors in predicting the carbon budget can imply high costs, there is some need to include more sophisticated climate models into the economics of global climate change. This paper presents a non-linear pulse representation of the process-based and data-validated Bern carbon model. Compared to the Nordhaus approach this leads to different results with respect to optimal climate policy and atmospheric carbon dioxide concentration. In particular, our results suggest that economic studies which use a Nordhaus representation of the climate system are biased towards high carbon emission and low abatement levels.     

Use of Airborne γ-Ray Spectrometry for Environmental Assessment of the Rehabilitated Nabarlek Uranium Mine, Australia

This article describes an airborne γ survey of a 7 × 5 km region around the rehabilitated Nabarlek uranium mine in northern Australia. An unusually tight line spacing (100 m) and low aircraft height (50 m) were used, enabling the survey to distinguish man-made structures such as ponds and accommodation areas, as well as creek lines. Positive correlations between airborne data and ground-based readings enabled an estimation of the average absorbed dose rate arising from terrestrial γ radiation over large areas of the site to be derived. For the fenced minesite area this estimate was 0.31 μ Gy hr^{− 1}. The airborne survey data were found to be invaluable in helping to plan further ground-level investigations and showed promise as an assessment tool for rehabilitated minesites.     

Development of the concept of spatial–temporal mask for testing effects of discharge from well-drilling activities on biological communities

This paper describes the use of Bayesian spatial models to develop the concept of a spatial–temporal mask for the purpose of identifying regions in which before and after drilling effects are most clearly defined and from which the consequences of exposure of macrofauna and meiofauna to the release of drilling discharges can be evaluated over time. To determine the effects of drilling fluids and drill-cuttings on the marine benthic community, it is essential to know not only where discharged materials ended up within the possible impact area, but also the chemical concentrations to which biota were exposed during and after drilling. Barium and light hydrocarbons were used as chemical tracers for water-based and non-aqueous-based fluids in a shallow water site in the Campos Basin, off the coast of Brazil. Since the site showed evidence of exposure to waste material from earlier drilling, the analysis needed to take into account the background concentrations of these compounds. Using the Bayesian models, concentrations at unsampled sites were predicted and regions altered and previously contaminated were identified.     

Determining the depositional pattern by resistivity–seismic inversion for the aquifer system of Maira area,Pakistan

Velocity and density measured in a well are crucial for synthetic seismic generation which is, in turn, a key to interpreting real seismic amplitude in terms of lithology, porosity and fluid content. Investigations made in the water wells usually consist of spontaneous potential, resistivity long and short normal, point resistivity and gamma ray logs. The sonic logs are not available because these are usually run in the wells drilled for hydrocarbons. To generate the synthetic seismograms, sonic and density logs are required, which are useful to precisely mark the lithology contacts and formation tops. An attempt has been made to interpret the subsurface soil of the aquifer system by means of resistivity to seismic inversion. For this purpose, resistivity logs and surface resistivity sounding were used and the resistivity logs were converted to sonic logs whereas surface resistivity sounding data transformed into seismic curves. The converted sonic logs and the surface seismic curves were then used to generate synthetic seismograms. With the utilization of these synthetic seismograms, pseudo-seismic sections have been developed. Subsurface lithologies encountered in wells exhibit different velocities and densities. The reflection patterns were marked by using amplitude standout, character and coherence. These pseudo-seismic sections were later tied to well synthetics and lithologs. In this way, a lithology section was created for the alluvial fill. The cross-section suggested that the eastern portion of the studied area mainly consisted of sandy fill and the western portion constituted clayey part. This can be attributed to the depositional environment by the Indus and the Kabul Rivers.     

Life cycle assessment of solar photo-Fenton and solar photoelectro-Fenton processes used for the degradation of aqueous α-methylphenylglycine

A comparative Life Cycle Assessment (LCA) of solar photo-Fenton and solar photoelectro-Fenton, two solar-driven advanced oxidation processes (AOPs) devoted to the removal of non-biodegradable pollutants in water, is performed. The study is based on the removal, at laboratory scale, of the amino acid α-methylphenylglycine, a good example of soluble and non-biodegradable target pollutant. The system under study includes chemicals, electricity, transport of all raw materials to the plant site, and the generation of emissions, but it does not take into account the impact of the infrastructure needed to build a hypothetical solar plant. Nine environmental impact categories are included in the LCA: global warming potential, ozone depletion potential, aquatic eutrophication potential, acidification potential, human toxicity potential, photochemical ozone formation potential, fresh water aquatic ecotoxicity potential, marine aquatic ecotoxicity potential, and terrestrial ecotoxicity potential and abiotic resource depletion potential. Although previous experimental results show that both AOPs are able to efficiently degrade the pollutant, the LCA indicates that solar-driven photo-Fenton is the most environmentally friendly alternative, mainly because the use of electricity in solar photoelectro-Fenton experiments involves high environmental impacts.     

Forecasts using Box–Jenkins models for the ambient air quality data of Delhi City

The monthly maximum of the 24-h average time-series data of ambient air quality-sulphur dioxide (SO(2)), nitrogen dioxide (NO(2)) and suspended particulate matter (SPM) concentration monitored at the six National Ambient Air Quality Monitoring (NAAQM) stations in Delhi, was analysed using Box-Jenkins modelling approach (Box et al. 1994). Univariate linear stochastic models were developed to examine the degree of prediction possible for situations where only the past record of pollutant data are available. In all, 18 models were developed, three for each station for each of the respective pollutant. The model evaluation statistics suggest that considerably satisfactory real-time forecasts of pollution concentrations can be generated using the Box-Jenkins approach. The developed models can be used to provide short-term, real-time forecasts of extreme air pollution concentrations for the Air Quality Control Region (AQCR) of Delhi City, India.     

Use of metallothioneins as biomarkers for environmental quality assessment in the Gulf of Gabès (Tunisia)

Detection and assessment of the impact of pollution on biological resources imply increasing research on early-warning markers such as metallothioneins (MTs) in metal exposure. In this paper, we have collated published information on the use of metallothioneins and metallothionein-like proteins (MTLPs) as biomarkers for environmental quality assessment in the Gulf of Gabès. In this area, some species of fish and bivalve were used as bioindicators of pollution. In these species, an induction of MTs/MTLPs by the essential metals such as Cu and Zn and the non-essential metals such as Cd was observed by different authors who suggest the potential use of these proteins as biomarkers. However, MT concentrations can be influenced by many biotic (sex, maturity stages, and tissues) and abiotic factors (temperature, salinity, and pH). This is essentially the case in field studies where many parameters can randomly affect MT levels, so the endogeneous regulation of MTs must be considered before using MTs as an indicator of heavy metal exposure. Moreover, the use of biomarker cannot be examined independently of the evaluation of techniques that enable its quantification. Therefore, the approach to the use of MTs/MTLP as biomarkers of exposure for an assessment of the physiological status of aquatic organisms is discussed in this paper.     

Exposure of Marine Mammals to Genotoxic Environmental Contaminants: Application of the 32P-Postlabeling Assay for Measuring DNA-Xenobiotic Adducts♯

There is little information on exposure of marine mammals to genotoxic environmental contaminants. The 32P-postlabeling assay has been successfully used to assess exposure to genotoxic polycyclic aromatic compounds in fish and humans. In the present study, a preliminary investigation showed that polycyclic aromatic compound-like DNA adducts were present in hepatic tissues of harbor seals (Phoca vitulina richardsi) exposed to petroleum following the Exxon Valdez oil spill. However, for marine mammals, effects from changes in tissue condition on DNA recovery and quality is of concern, because tissue samples are often collected from animals that have been dead for unknown periods of time. To assess the effects of postmortem thermal history on DNA recovery from tissue and on DNA adduct quantitation, samples of harbor porpoise (Phocoena phocoena) hepatic tissue were incubated for up to 10 d at 4 and 30 °C. Only traces (<4 g) of hepatic DNA were recovered from 200 mg of tissue after incubation at 30 °C for 36 h. At 4 °C, DNA (50–130 g) was recovered from tissue incubated for up to 6 d; whereas DNA recovery at 10 d was minimal. Chromatograms of 32P-labeled DNA digests of liver tissue held at 4 and 30 °C and salmon sperm DNA held at 30 °C for 2 d had comparable profiles, suggesting that alteration of DNA bases had occurred during incubation of porpoise liver tissue. Moreover, the chromatograms of DNA extracted from liver tissues of harbor porpoises caught incidentally in a northwest Atlantic fishery, packed in ice and sampled several days later also exhibited similar altered DNA structures. Although, altered DNA structures that can interfere with the DNA adduct quantitation were present in autolyzed tissue, changes in the 32P-postlabeling chromatography conditions can decrease the interference. Moreover, in a study with tissues taken from California sea lions (Zalophus californianus) immediately postmortem and stored at –80 °C until processing, DNA structures associated with tissue breakdown were not observed. The DNA from sea lions, however, had putative age-dependent hepatic DNA modifications, which have a distinctive profile, and must be considered when evaluating exposure of marine mammals to polycyclic aromatic compounds. Overall, the findings showed that with attention to the postmortem thermal history of the tissue samples hepatic DNA adducts, as measured by 32P-postlabeling, have the potential to serve as a biological indicator of exposure of marine mammals to environmental genotoxic compounds.     

Simulations of groundwater-surface water interaction and particle movement due to the effect of weir construction in the sub-watershed of the river Labe in the town of Děčín

Steady- and transient-state simulations of groundwater flow and particle movement in the sub-watershed of the river Labe in Dě?ín town was carried out using Visual MODFLOW software. The simulations were performed for calibration and for the scenarios that the change in the water level of the river Labe was undergoing. Steady-state simulation was carried out for the sake of calibration of model outputs. For transient simulation, two different scenarios were considered in order to investigate the response of the aquifer system to the stresses applied on surface water of the river. The simulation results have shown that the surface water and groundwater interactions, and the subsequent particle movement were affected by the stresses applied on the surface water in the river Labe. The first scenario involved the rapid recharge of surface water to the aquifer in the vicinity of the river while particles still move towards the river at the places far away from the river. At the end of the second scenario, particles still tend to move towards the river slowly and finally tend to stay within the aquifer as equilibrium of hydraulic gradient is reached between the surface and groundwater levels. The time series graphs of hydraulic heads at all observation wells show that the groundwater level in the surrounding aquifer rises significantly as a result of recharges from the river. The local water balance of the study area was calculated and expressed as the rates of water entering and leaving the system. At the end of the second scenario, the difference between the rate of flow into and out of the model area was 0.73 m³ day^?1.     

Factors affecting the sustainability of solid waste management system—the case of Palestine

Understanding the predictors of sustainability in solid waste management (SWM) systems can significantly contribute to eliminate many waste management problems. In this paper, the sustainability elements of SWM systems of interest are (1) attitudes toward separation at the source, (2) behaviour regarding reuse and/or recycling and (3) willingness to pay for an improved service of SWM. The predictors affecting these three elements were studied in two Palestinian cities: Ramallah and Jericho. The data were collected via structured questionnaires and direct interviews with the respondents, and the analysis utilized a logistic regression model. The results showed that the place of residence and dwelling premises are the significant factors influencing attitudes toward separation at the source; the place of residence and age are the significant factors explaining behaviour regarding reuse and/or recycling; while the dwelling premises, gender, level of education and being received education on waste management are the significant factors affecting willingness to pay for an improved service of SWM.     

Chemometric study on the trace metal accumulation in the sediments of the Cochin Estuary―Southwest coast of India

The distribution and accumulation of trace metals in the sediments of the Cochin estuary during the pre-monsoon, monsoon and post-monsoon periods were investigated. Sediment samples from 14 locations were collected and analysed for the metal contents (Mg, Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd and Pb), organic carbon, total nitrogen, total sulphur and grain size. The data were processed using statistical tools like correlation, factor and cluster analysis. The study revealed an enrichment of Cd and Zn in the study area particularly at station 2, which is confirmed by enrichment factor, contamination factor and geoaccumulation index. The factor analysis revealed that the source of Cd and Zn may be same. The study indicated that the spatial variation for the metals like Mg, Cr, Fe, Co, Ni, Cu, Zn, Cd and Pb were predominant unlike Mn which shows a temporal variation. The strong association of trace metals with Fe and Mn hydroxides and oxides are prominent along the Cochin estuary. The anthropogenic inputs of industrial effluents mainly control the trace metals enrichment in the Cochin estuary.