High on pollution: drugs as environmental contaminants

Environmental protection has advanced in leaps and bounds over recent years and today we undoubtedly live in a much cleaner world than we did a generation ago. But look closely and all is not what it seems. Rather than reducing pollution, we are, in fact, still bathed in a sea of chemicals. What is more, most of them originate not from factories or agriculture but from our own homes, in the form of drugs and consumer products. Tackling these diffuse sources presents one of the main environmental challenges of the 21st century.     

Terrestrial snails as quantitative indicators of environmental metal pollution

Concentrations of cadmium, lead, copper and zinc were measured in individuals of Arianta arbustorum from different urban sampling sites. In comparison to snails from a reference site, the animals collected in the city showed higher concentrations of cadmium, lead, and copper, indicating elevated levels of metal pollution. The most pronounced difference in tissue concentrations between control animals and contaminated snails was observed for lead. Within the city, metal levels in snails differed significantly, even between adjacent populations. Arianta arbustorum is a suitable species for biomonitoring, because it is widespread, resident and easy to collect; it has a high capacity for metal accumulation and shows different concentrations depending on metal contamination of the sampling area. An interspecific comparison of metal concentrations in terrestrial gastropods was conducted to define background levels and classes of burden. Three pollution levels are distinguished on the basis of the snails' metal burden: no pollution (class 1: reference sites), moderate (class 2: traffic and other human activities in urban areas), and high pollution (class 3: mining and heavy industry).     

Industrial effluent quality, pollution monitoring and environmental management

Royal Commission Environmental Control Department (RC-ECD) at Yanbu industrial city in Kingdom of Saudi Arabia has established a well-defined monitoring program to control the pollution from industrial effluents. The quality of effluent from each facility is monitored round the clock. Different strategic measures have been taken by the RC-ECD to implement the zero discharge policy of RC. Industries are required to pre-treat the effluent to conform pretreatment standards before discharging to central biological treatment plant. Industries are not allowed to discharge any treated or untreated effluent in open channels. After treatment, reclaimed water must have to comply with direct discharge standards before discharge to the sea. Data of industrial wastewater collected from five major industries and central industrial wastewater treatment plant (IWTP) is summarized in this report. During 5-year period, 3,705 samples were collected and analyzed for 43,436 parameters. There were 1,377 violations from pretreatment standards from all the industries. Overall violation percentage was 3.17%. Maximum violations were recorded from one of the petrochemical plants. The results show no significant pollution due to heavy metals. Almost all heavy metals were within RC pretreatment standards. High COD and TOC indicates that major pollution was due to hydrocarbons. Typical compounds identified by GC-MS were branched alkanes, branched alkenes, aliphatic ketones, substituted thiophenes, substituted phenols, aromatics and aromatic alcohols. Quality of treated water was also in compliance with RC direct discharge standards. In order to achieve the zero discharge goal, further studies and measures are in progress.     

A quantitative methodology for indexing environmental sensitivity and pollution potential

A methodology for rating the suitability of sites forthe location of industrial facilities is formulated and appliedto the case of a coal-fired power plant location. The methodologycomprises two major interlinked components: the environmentalplant location indexing component, which involves theidentification, scaling and weighting of environmentalsensitivity factors; and the impact analysis component, whichinvolves the superimposition of the pollution generation impactsof an industrial facility on spatially gridded zones of variousenvironmental sensitivities. For each rectangular areal unitdefined by a square grid, the Unit Pollution Potential Index isdetermined by the severity and distribution of key environmentalsensitivity factors and the coverage of superimposed pollutanteffects as determined by contaminant fate and transport models.For any alternative site of a planned facility, the summation ofthe unit indices over the area of influence of the facilityprovides the quantitative Pollution Index, which can be used as abasis for comparison of alternative sites for planned facilities.For this paper, this methodology is applied to the hypotheticalcase of the siting of a coal-fired power plant in thenortheastern region of the United States, in which threealternative sites are considered. The three sites: A, B and Cyielded indices of 47.83, 47.91 and 47.6, respectively, indicatingthat site C is the most suitable for siting the power plant.     

Studies of the possibility of measuring changes in environmental pollution with the pixe method using moths as a monitor

The possibility has been investigated of using the PIXE method to yield long and reliable time series for indicating changes in the environment, with moths or butterflies as a sample target. The suitability of this approach was demonstrated by studying standard deviations of measurements of single moths and those of populations of moths. The properties of targeting at different anatomical sites were investigated and the wing gave the most stable results, perhaps because its metabolic development is completed at the imago (newborn butterfly) stage. According to test measurements of different populations it seems possible to use moth or butterfly wing measurements to study environmental changes over the past century or so using moth or butterfly collections.     

Characteristics of environmental pollution related with public complaints in an industrial shipbuilding complex, Korea

The shipbuilding industry of Korea, ranked number one in the world in annual amount of ship orders, has contributed to national economic growth; however, this has resulted in various environmental problems. Characteristics of environmental pollution, such as particulate matters, odor, and noise, which are closely related with public complaints, were evaluated in an industrial shipbuilding complex. The concentrations of PM-10 and TSP were significantly affected by the distance between the measurement site and shipbuilding workplace, as well as the height of the measurement site. Average PM-10 concentrations in the residential area ranged from 40.10 to 44.10 ??g/m³, which were not high in comparison with the ambient air quality standard and those of major cities in Korea. Paint particles could affect a wider area than typical particulate matters due to their generation and transport properties. The properties of odor in the study area were widely affected by the work intensity in shipyards and the temperature. Twenty-five out of total 54 samples collected in the residential area exceeded the dilution factor of 10, which is the tolerable limit adopted in Korea. Noise had an influence on a limited area due to the extinction effect with distance from the shipyards, while severe noise levels higher than 90 dB(A) were frequently found inside the shipyards.     

Trace elements as tracers of environmental pollution in the canal sediments (alluvial formation of the Danube River, Serbia)

The purpose of this study was to examine the levels of trace elements and to discuss the origin and mobility of these contaminants in the canal sediments (alluvial formation of the Danube River). The most significant fractions binding all of the studied elements were oxides and silicates. The high proportion of elements in the residual fraction and the generally low contents of extractable elements reflected the background geochemical conditions. The contents of trace elements (except Hg and As) were dominantly controlled by the presence of Fe and Mn oxides as well as by the grain size and the geochemical composition of the sediment. The studied alluvial sediments were not heavily contaminated; there were only few sites where an anthropogenic influence on the concentrations of some metals (Cu, Cd, Zn, and Pb) was noticed. The results from this study show that impact of Pan?evo industrial zone on the quality of the Danube River and its contamination with trace element is minor.     

Use of tree bark for comparing environmental pollution in different sites from Buenos Aires and Montevideo

Multi-elemental profiles in bark of green ash trees collected in three representative areas of Buenos Aires, Argentina and Montevideo, Uruguay, were assessed as potential air pollution indicators. Ten elements: Al, Ba, Cr, Cu, Fe, Mg, Mn, Ni, Pb, and Zn, were measured using inductively coupled plasma optical emissions spectrometry from 70 samples collected in different environments: central, residential and rural (reference site), in order to compare spatial patterns of metal concentration. The samples used as a control were collected from a nature reserve situated far away from any significant influences, not even a nearby road. The reference site (RF) exhibited the lowest concentrations of Al, Cr, Fe, Ni, Pb, and Zn. However, Ba and Mn showed similar concentrations in all measured sites. Magnesium is the only element that had a greater concentration in RF than at the other sites. Copper did not show any clear pattern. The Centre of Montevideo (MVD) showed higher concentrations of Al, Ba, Cr, Fe, Pb and Zn than the Centre of Buenos Aires (BA). In the A sectors, Montevideo (SAMVD) showed higher concentrations of Al, Cu, Mg, Ni, and Zn and lower concentrations of Ba, Cr, Fe, Mn, and Pb than Buenos Aires (SABA). In the B sectors, Montevideo (SBMVD) showed higher concentrations of Al, Ba, Cu, Fe, Pb, and Zn and lower concentrations of Cr and Mg than Buenos Aires (SBBA), but similar concentrations of Mn and Ni. The use of bark for biomonitoring metals allowed us to detect concentration differences related to the urban fabric and the different kinds of vehicles and their fuels. In the cities, the differences in metal concentrations detected in bark were more striking between the sectors than between centers, despite CBA being much larger than CMVD in population, extension and vehicular traffic.     

Assessment of both environmental cytotoxicity and trace metal pollution using Populus simonii Carr. as a bioindicator

The level of environmental pollution in the city of Ivano-Frankivsk (Western Ukraine) has been assessed by means of roadside poplar trees as bioindicators. Dividable apical meristem cells of rudimentary leaves were quantitatively analysed for mitotic activity and distribution. Anaphases were further examined for chromosomal aberrations. Male catkins were also examined for sterile pollens. Accumulation of trace elements in vegetative buds was also evaluated in order to reveal source(s) of environmental pollution. Poplar trees growing in the urban environment proved to have increased chromosomal aberrations (up to 4-fold) and increased pollen sterility (up to 4-fold) as well as decreased mitotic activity (by factor 1.5) as compared to control sampling site. The biomarker data correlate moderately with increased (up to 4-fold) concentrations of Ni, Zn, Pb, Cd and Cu in vegetative tissues suggesting that probable cause of the environmental cytotoxicity may be vehicle emissions. The maximum increase in chromosomal aberrations (7-fold) and the minimum mitotic activity (half of the control one) were recorded in poplar trees growing in industrial suburb in vicinity of large cement production plant. Taking in mind insignificant bioaccumulation of trace elements in the industrial suburb, the high environmental toxicity has been ascribed to contamination in cement and asbestos particulates.     

An innovative statistical approach for analysing non-continuous variables in environmental monitoring: assessing temporal trends of TBT pollution

The current work presents an innovative statistical approach to model ordinal variables in environmental monitoring studies. An ordinal variable has values that can only be compared as "less", "equal" or "greater" and it is not possible to have information about the size of the difference between two particular values. The example of ordinal variable under this study is the vas deferens sequence (VDS) used in imposex (superimposition of male sexual characters onto prosobranch females) field assessment programmes for monitoring tributyltin (TBT) pollution. The statistical methodology presented here is the ordered logit regression model. It assumes that the VDS is an ordinal variable whose values match up a process of imposex development that can be considered continuous in both biological and statistical senses and can be described by a latent non-observable continuous variable. This model was applied to the case study of Nucella lapillus imposex monitoring surveys conducted in the Portuguese coast between 2003 and 2008 to evaluate the temporal evolution of TBT pollution in this country. In order to produce more reliable conclusions, the proposed model includes covariates that may influence the imposex response besides TBT (e.g. the shell size). The model also provides an analysis of the environmental risk associated to TBT pollution by estimating the probability of the occurrence of females with VDS ≥ 2 in each year, according to OSPAR criteria. We consider that the proposed application of this statistical methodology has a great potential in environmental monitoring whenever there is the need to model variables that can only be assessed through an ordinal scale of values.     

Recycling and utilization of metabolic wastes for energy production is an index of biochemical adaptation of fish under environmental pollution stress

The activity levels of lactate dehydrogenase andlactic acid were assessed in various tissues of the fishduring exposure to lethal concentration of group-IIPyrethroids (deltamethrin, cypermethrin, fenvalerate andfluvalinate) for a period of 72 hours. The results showedsteady increased levels in all the tissues (blood,muscle, brain and liver) with response patterncharacteristic of their own. The increased LDH activityand lactic acid levels indicate the shifting of aerobicglycolysis to anaerobiosis and its further utilizationfor energy production during adaptation to toxic stress.     

Industrial pollution transport. Part 1. Formulation of the problem and air pollution estimates

A pollution transport problem is formulated in a limited area. As the pollution sources we take emissions from industrial plants. Physically and mathematically suitable conditions are prescribed on the open boundaries. We show that the problem (as well as its adjoint) is well posed in the sense that a weak solution exists, is unique and depends continuously on its data. Direct and adjoint estimates of the average pollution concentration in an ecologically important zone are given, and the sensitivity of these estimates to perturbations in model parameters is analyzed.     

Evaluating the efficiency of sediment metal pollution indices in interpreting the pollution of Haraz River sediments, southern Caspian Sea basin

The Haraz River is one of the most significant rivers in the southern Caspian Sea basin. Towards the estuary, the river receives discharges of industrial, agricultural, and urban wastes. In the present investigation, bulk concentrations of Cu, Zn, As, Cd, Pb, Fe, Ni, Cr, Co, and Sr in Haraz River (Iran) bed sediments were measured from several sample locations. In addition, association of studied metals with various sedimentary phases was assessed to determine the proportions of metals in different forms. The intensity of sediment contamination was evaluated using an enrichment factor (EF), geo-accumulation index (I_geo), and a newly developed pollution index (I_poll). Both EF and I_geo formulae compare present concentrations of metals to their background levels in crust and shale, respectively. In a specific area with its own geological background like Haraz River water basin where naturally high concentrations of metals may be found, such a comparison may lead to biased conclusions regarding levels of anthropogenic contamination. Accordingly, chemical partitioning results are substituted for the mean crust and shale levels in the new index (I_poll). The Pearson correlation coefficient between the anthropogenic portion of metallic pollution in Haraz river-bed sediments with I_poll showed much more value in comparison with those of geochemical accumulation index and enrichment factor. The order of metals introduced by anthropogenic activities are as follows: Sr > Pb > Co > Cd > Zn > Cu > Ni > As > Cr > Fe. The results showed relatively higher concentrations of Cd, As, Sr, and Pb in comparison with those of shale. However, based on the chemical partitioning of metals, it is found that Sr, Pb, Co, and Cd are the most mobile metals. In spite of the high As concentrations in sediments, it is not likely that this element is a major hazard for the aquatic environment since it is found mainly in the residual fraction. Also, Fe, Cr, and Ni are present in the greatest percentages in the residual fraction, which implies that these metals are strongly linked to the sediments.     

Determination of heavy metal pollution with environmental physicochemical parameters in waste water of Kocabas Stream (Biga, Canakkale, Turkey) by ICP-AES

Waste water pollution of industrial areas can answer for the serious consequences of one of the most important environmental threats to the future. In this study, inductively coupled plasma-atomic emission spectrometry method (ICP-AES) is proposed to determine heavy metals (Pb, Cu, Cd, Cr, Zn, Al, Fe, Ni, Co, Mn) and major elements (Ca, Mg) in waste water of Kocabas Stream. The concentration of metals in the waste water samples taken from 9 different stations (St.) in Biga-Kocabas Stream in November 2004 (autumn period) were determined after simple pretreatment of samples by the proposed ICP-AES method. An analysis of a given sample is completed in about 15 min for ICP-AES the method. The results of heavy metals concentrations in waste water were found between 0.00001–77.69610 mg l⁻¹ by the ICP-AES technique. The concentrations of Pb, Cd, Cu, Zn, Cr, Al, Fe, Mn, Ni, Co, Mg and Ca 0.00001 (St.3,6,7) – 0.0087 mg l⁻¹ (St.9), 0.00001 (St.4-7) – 0.0020 mg l⁻¹ (St.8), 0.00001 (St.1,3-7,9) – 0.0041 mg l⁻¹ (St.2), 0.0620 (St.2) – 0.2080 mg l⁻¹ (St.3), 0.0082 (St.6) – 0.2290 mg l⁻¹ (St.8), 0.3580 (St.2) – 1.7400 mg l⁻¹ (St.3), 0.2240 (St.1) – 0.6790 mg l⁻¹ (St.3), 0.0080 (St.1) – 1.5840 mg l⁻¹ (St.3), 0.0170 (St.3) – 0.0640 mg l⁻¹ (St.2), 0.0010 (St.1,4,5,8) – 0.0080 mg l⁻¹ (St.3), 5.0640 (St.9) – 5.2140 mg l⁻¹ (St.1) and 43.3600 (St.2) – 77.6961 mg l⁻¹ (St.9), respectively. Also we measured environmental physicochemical parameters such as temperature, salinity, specific conductivity, total dissolved solid (TDS), pH, oxidation and reduction potential (ORP), and dissolved oxygen (DO) in the waste water at sampling stations.     

乌鲁木齐市冬季重污染天气下PM_(2.5)中重金属污染特征及来源解析

通过乌鲁木齐市2013年2月5日至26日一次重污染天气过程中,在6个采样点位进行细颗粒物PM_(2.5)的采集,并对其中的13种重金属(Cu、Sr、Mo、Cd、Pb、V、Cr、Mn、Fe、Co、Ni、As、Hg)含量、Mull污染指数、空间分布以及溯源进行了分析。结果显示:采样期间乌鲁木齐市重金属浓度在0.23~178 ng/m~3之间,浓度水平排序PbMnCrFeAsVCuNiSrCdMoCoHg,其中Cd、Hg、Pb、Cr、As浓度均高于乌鲁木齐市背景值和国内外其他城市水平,且Mull污染指数处于较严重的污染水平;在重金属元素浓度的空间分布上,铁招和南公园点位重金属浓度较高,31中学和市监测站相对较低。     

Soil pollution under the effect of treated municipal wastewater

Soil heavy metal pollution due to wastewater reuse was assessed by means of the concentration factor (CF) and/or pollution load index (PLI).In this respect, a greenhouse pot experiment was conducted, using a completely randomized block design, including five treatments of treated municipal wastewater (0%, 25%, 50%, 75%, and 100%), in four replications. Brassica oleracea var. Capitata was used as a test crop. The optimum CFs were expressed as a function of maximum dry matter of cabbage plant parts yield, and the values obtained per plant part were as follows: stems-Zn-CF 2.96, Co-CF 0.85, Ni-CF 0.92; whole plant-Cu-CF 3.90, Ni-CF 0.87, and Pb-CF 11.52; and leaves-Pb-CF 11.78. The PLI was calculated as the geometric mean of the CF of each metal, and was related to the maximum dry mater yield of cabbage stems and heads. The optimum values found were: stems PLI 1.99-2.55 and heads 2.25.     

On the propagation of error in air pollution measurements

Four methods for estimating the uncertainties in air pollution measurements are outlined. The approaches are: analytical solution-approximation; application of distribution theory; experimentation; and simulation. The advantages and disadvantages of each method are illustrated using data from High-Volume air samplers, the instrument most commonly used for monitoring ambient concentrations of airborne particles.Dr Evans is Assistant Professor of Environmental Science and Mr Kinney is a doctoral candidate in the Department of Environmental Science and Physiology, Harvard School of Public Health. Dr Cooper is at the Manufacturing Research Laboratory, Thomas J. Watson Research Center, IBM, Yorktown Heights, NY.     

An investigation of environmental and sustainability discourses associated with the substantive purposes of environmental assessment

This paper investigates the discursive construction of the substantive purposes of environmental assessment (EA). It addresses these purposes by exploring the complex and often multifaceted linkages between political factors and plural views of democracy, public participation, and the role of science that are embedded in environmental and sustainability discourses. The interaction between policy-making and public actors leads to the formulation of divergent and potentially competing rationales for public participation, and for social appraisal more generally. Participatory approaches have also given impetus to the development of several interpretations on the role of science in assessment procedures. Science is important in mediating public participation and the two are therefore reciprocally linked. This leads to discourses that become manifest in the construction of substantive purposes. Discourse analysis in EA is a relevant method for examining trends and patterns in sustainable development. It is argued that public participation is an important, if not decisive, variable in the articulation and civil legitimacy of certain purposes. A general proposition that results from this paper is that EA, although typically presented as an objective scientific tool, is an intrinsically normative process. Enhanced knowledge on the construction, and reconstruction over time, of substantive purposes is required if environmental and sustainability discourses are to be used and understood as meaningful analytical instruments to assess the socio-political implications of EA.