Methodology and model for performance and cost comparison of innovative treatment technologies at wood preserving sites

Wood preserving facilities have used a variety of compounds, including pentachlorophenol (PCP), creosote, and certain metals, to extend the useful life of wood products. Past operations and waste management practices resulted in soil and water contamination at a portion of the more than 700 wood preserving sites in the United States (EPA, 1997). Many of these sites are currently being addressed under federal, state, or voluntary cleanup programs. The U.S. Environmental Protection Agency (EPA) National Risk Management Research Laboratory (NRMRL) has responded to the need for information aimed at facilitating remediation of wood preserving sites by conducting treatability studies, issuing guidance, and preparing reports. This article presents a practical methodology and computer model for screening the performances and comparing the costs of seven innovative technologies that could be used for the treatment of contaminated soils at user‐specified wood preserving sites. The model incorporates a technology screening function and a cost‐estimating function developed from literature searches and vendor information solicited for this study. This article also provides background information on the derivation of various assumptions and default values used in the model, common contaminants at wood preserving sites, and recent trends in the cleanup of such sites. © 2001 John Wiley & Sons, Inc.     

Web-Based Information System for Pollution Monitoring of Lake Ohrid

In this paper, we present a Web-based information system for pollution monitoring and analysis of Lake Ohrid. Our work is related to the ecological state of Lake Ohrid, which represents a rare natural ecosystem inhabited by many endemic and relict species. Aim of the study is to present the possibilities offered by the Web application, such as fast information access, support of distributed collaboration by information sharing instead of exchange, acquisition and analysis of pollutant data, database processing based on lake models, as well as GIS analysis. In this way, the data and the analysis are performed in one place and they are available to any user having only a Web browser.     

Lessons learned from classroom training on natural attenuation of chlorinated solvents

Technology and information transfer are critical functions within the remediation industry. Researchers in the private sector, academia, and government all struggle to have their findings accepted and put to good use by the remediation industry at large but must work even harder to have their findings accepted and put into practice by state and federal regulators in the environmental agencies overseeing cleanups. Unfortunately, many technology and information transfer efforts fail to reach state and federal regulators, and even fewer achieve regulatory acceptance. A two‐year‐long campaign to deliver a training class on the natural attenuation of chlorinated solvents in groundwater is one prominent example of very effective technology and information transfer. Several of the elements and aspects of that successful training class are presented and discussed in order to provide others with a proven and workable template. © 2010 Wiley Periodicals, Inc.     

Substitution of peat,fertiliser and manure by compost in hobby gardening: User surveys and case studies

Four user surveys were performed at recycle centres (RCs) in the Municipalities of Aarhus and Copenhagen, Denmark, to get general information on compost use and to examine the substitution of peat, fertiliser and manure by compost in hobby gardening. The average driving distance between the users’ households and the RCs was found to be 4.3 km and the average amount of compost picked up was estimated at 800 kg per compost user per year. The application layer of the compost varied (between 1 and 50 cm) depending on the type of use. The estimated substitution (given as a fraction of the compost users that substitute peat, fertiliser and manure with compost) was 22% for peat, 12% for fertiliser and 7% for manure (41% in total) from the survey in Aarhus (n = 74). The estimate from the survey in Copenhagen (n = 1832) was 19% for peat, 24% for fertiliser and 15% for manure (58% in total). This is the first time, to the authors’ knowledge, that the substitution of peat, fertiliser and manure with compost has been assessed for application in hobby gardening. Six case studies were performed as home visits in addition to the Aarhus surveys. From the user surveys and the case studies it was obvious that the total substitution of peat, fertiliser and manure was not 100%, as is often assumed when assigning environmental credits to compost. It was more likely around 50% and thus there is great potential for improvement. It was indicated that compost was used for a lot of purposes in hobby gardening. Apart from substitution of peat, fertiliser and manure, compost was used to improve soil quality and as a filling material (as a substitute for soil). Benefits from these types of application are, however, difficult to assess and thereby quantify.     

Noncombustion technologies for remediation of persistent organic pollutants in stockpiles and soil

Persistent organic pollutants (POPs) are a set of chemicals that are toxic, persist in the environment for long periods of time, and biomagnify as they move up through the food chain. Combustion technologies have been the principal technology used to destroy POPs. However, combustion technologies can create polychlorinated dibenzo‐p‐dioxins and polychlorinated dibenzo‐p‐furans, which are human carcinogens. Two organizations, the United Nations Environment Programme (UNEP) and the International HCH and Pesticides Association (IHPA) have developed detailed reports and fact sheets about noncombustion technologies for POP treatment. This article is intended to update and summarize these reports in a concise reader's guide, with links to sources of further information. The updated information was obtained by reviewing various Web sites and documents, and by contacting technology vendors and experts in the field. © 2006 Wiley Periodicals, Inc.     

The complexity of barriers to biogas digester dissemination in Indonesia: challenges for agriculture waste management

In the global south, the use of firewood and LPG as dominant energy sources for cooking contributes to socio-ecological issues. Alternatively, biogas is considered a clean energy source generated from organic waste. However, in Indonesia, until 2018, only less than 2% of households utilized biogas for cooking fuel. This research aims to explore the landscape of biogas governance in Indonesia, its fragmentation, and its relation with biodigester dissemination. This study found that there is fragmentation within small-medium scale national biogas programs in Indonesia. Seven national government biogas programs have similar governance arrangements and characteristics; scattered in different departments within the ministry, using the grant approach with two main vendors, often overlapping with local government programs, and not providing proper monitoring and evaluation mechanism, as well as proper training for users. Meanwhile, the biogas program by a non-government organization utilizes a semi-commercial approach; collaborating with multiple stakeholders (governments, local construction partner organizations, cooperatives, and private sectors-companies and banks); and has standardized training and after-sale services. Within those biogas programs, there are multiple barriers along the supply chain process of biodigester dissemination. These barriers relate to the governance aspect of biogas programs. Fragmented governance affected the capability of each program to tackle barriers in biogas digester dissemination. Besides, heavy subsidy on LPG by the government reduced attraction to biogas. This study shows technology adoption barriers beyond the user/individual aspects. It shows interaction among different factors such as policy, the governance of technology transfer, technical production issues, and socio-cultural problems.

     

The integration of trajectory models and analysis into spill response information systems

The spill response community is engaged in a technological rush towards computer-based, information-synthesis systems. Typically, they are modeled after many successful ‘incident command’ or ‘command and control’ systems that rely on micro- or mini-computer technology that is friendly and graphically oriented. Virtually all of these systems offer spill trajectory modeling components. What is typically lacking in this modeling output is any reliable way to estimate the uncertainty. This means that advice derived from the models is of questionable value, and when integrated into a complex response plan, the propagation of errors could seriously compromise the usefulness of results. It is shown that no single trajectory model run can provide the necessary information to respond in an optimal, ‘minimum regret’ strategy. However, a well-defined series of model runs used as the basis for trajectory analysis can provide the required information. A discussion of options suggests that the adoption of a minimum standard analysis procedure would significantly improve the ability of integrated response systems to use the predictions of oil distributions.     

电网建设项目环保管理信息系统的开发与应用

针对目前电网建设项目环境保护工作管理现状,利用可视化面向对象开发技术和图形化组态的概念构建出一个图形导航、树状导航相结合的环境保护工作管理信息系统软件。系统分为电网建设项目环境保护工作基础数据管理——项目管理、电网建设项目环境保护工作管理文件查询——项目环保文件查询和国家环境保护法律和法规等文件查询、常用文件管理四部分。应用结果证明,该系统基本满足了当前电网建设项目环境保护工作管理及信息化的要求,为电网建设项目环境保护工作管理提供了更加准确、便利的工具。     

Agricultural waste as household fuel: Techno-economic assessment of a new rice-husk cookstove for developing countries

In many rural contexts of the developing world, agricultural residues and the organic fraction of waste are often burned in open-air to clear the lands or just to dispose them. This is a common practice which generates uncontrolled emissions, while wasting a potential energy resource. This is the case of rice husk in the Logone Valley (Chad/Cameroon). In such a context household energy supply is a further critical issue. Modern liquid fuel use is limited and traditional solid fuels (mainly wood) are used for daily cooking in rudimentary devices like 3-stone fires, resulting in low efficiency fuel use, huge health impacts, increasing exploitation stress for the local natural resources. Rice husk may be an alternative fuel to wood for household energy supply. In order to recover such a biomass, the authors are testing a proper stove with an original design. Its lay-out (featuring a metal-net basket to contain the fuel and a chimney to force a natural air draft) allows a mix of combustion/gasification of the biomass occurring in a completely burning fire, appropriate for cooking tasks. According to results obtained with rigorous test protocols (Water Boiling Test), different lay-outs have been designed to improve the performance of the stove. Technical and economic issues have been addressed in the development of such a model; building materials have been chosen in order to guarantee a cost as low as possible, using locally available items. The feasibility of the introduction of the stove in the studied context was assessed through an economic model that keeps into account not only the technology and fuel costs, but also the energy performance. According to the model, the threshold for the trade-off of the stove is the use of rice husk to cover 10–15% of the household energy needs both with traditional fireplaces or with improved efficiency cookstoves. The use of the technology proposed in combination with improved woodstove would provide householders with an appropriate and convenient cooking technology portfolio, increasing the opportunities of choice of the preferred energy system for the user and allowing significant savings for the family budget (up to 50% of the total annual cooking energy expenditure). The proposed model may be used also as a tool for the evaluation of the affordability or for the comparison of different cooking technologies also in other similar contexts, given their specific techno-economic parameter values.     

Supercritical Fluids-Assisted Processing Using CO2 Foaming to Enhance the Dispersion of Nanofillers in Poly(butylene succinate)-Based Nanocomposites and the Conductivity

Journal of Polymers and the Environment - With the rapid development of electronic information technology, traditional metal conductive materials can no longer satisfy the needs of a wider...     

Effect of technology development on potential environmental impacts from heavy metals in waste smartphones

Technology development has brought beneficial changes in the functions of smartphones but has the potential to impact the environment due to the high generation of waste smartphones. Thus, this study evaluates and compares environmental impact potentials from metals in waste smartphones to figure out the effect of smartphone model replacements on hazardous waste, resource depletion, and toxicity potentials. The total threshold limit concentration (TTLC) analysis is used to determine whether the waste smartphones would be classified as hazardous waste, and the life-cycle impact assessment methods are used to evaluate resource depletion, cancer, non-cancer, and ecotoxicity potentials. The TTLC results showed that the smartphone technology development did not reduce hazardous waste potentials. The life-cycle impact assessment results showed that the technology development overall reduced resource depletion potential but increased toxicity potential. In addition, priority metals contributing to the potentials were identified to effectively manage their environmental impacts. This study can provide fundamental information for smartphone manufacturers, waste smartphone recyclers and disposers, and e-waste policymakers to circulate resources and to prevent environmental pollutions from hazardous and toxic materials.     

Application of interval 2-tuple linguistic MULTIMOORA method for health-care waste treatment technology evaluation and selection

The management of health-care waste (HCW) is a major challenge for municipalities, particularly in the cities of developing countries. Selection of the best treatment technology for HCW can be viewed as a complicated multi-criteria decision making (MCDM) problem which requires consideration of a number of alternatives and conflicting evaluation criteria. Additionally, decision makers often use different linguistic term sets to express their assessments because of their different backgrounds and preferences, some of which may be imprecise, uncertain and incomplete. In response, this paper proposes a modified MULTIMOORA method based on interval 2-tuple linguistic variables (named ITL-MULTIMOORA) for evaluating and selecting HCW treatment technologies. In particular, both subjective and objective importance coefficients of criteria are taken into consideration in the developed approach in order to conduct a more effective analysis. Finally, an empirical case study in Shanghai, the most crowded metropolis of China, is presented to demonstrate the proposed method, and results show that the proposed ITL-MULTIMOORA can solve the HCW treatment technology selection problem effectively under uncertain and incomplete information environment.     

Optimal solid waste collection routes identified by the ant colony system algorithm.

In the present paper, the Ant Colony System (ACS) algorithm is used for the identification of optimal routes in the case of municipal solid waste (MSW) collection. The proposed MSW management system is based on a geo-referenced spatial database supported by a geographic information system (GIS). The GIS takes into account all the required parameters for solid waste collection. These parameters include static and dynamic data, such as the positions of waste bins, the road network and the related traffic, as well as the population density in the area under study. In addition, waste collection schedules, truck capacities and their characteristics are also taken into consideration. Spatio-temporal statistical analysis is used to estimate inter-relations between dynamic factors, like network traffic changes in residential and commercial areas. The user, in the proposed system, is able to define or modify all of the required dynamic factors for the creation of alternative initial scenarios. The objective of the system is to identify the most cost-effective scenario for waste collection, to estimate its running cost and to simulate its application. Finally, the results of the ACS algorithm are compared with the empirical method currently used by the Municipality of Athens.     

COASTMAP: An integrated monitoring and modeling system to support oil spill response

One of the most difficult tasks in oil spill response modeling is to provide accurate estimates of the currents and winds during the spill event. This is typically done in an ad-hoc, subjective manner combining very limited field observations with simplified hydrodynamic and meteorological models. As an alternative an integrated environmental monitoring and modeling system, called COASTMAP, is presented. COASTMAP allows the user to collect, manipulate, display, and archive real-time environmental data through an embedded geographic information system and environmental data management tools; to perform simulations with a suite of environmental models (e.g. hydrodynamics, meteorological) in order to predict dynamics in the operational area and to assimilate real-time data into the models to allow hindcasting, nowcasting and forecasting. COASTMAP, operational on a personal computer, is controlled by mouse/keyboard through a series of menus and uses color graphics to present model predictions (plots, graphs, animations) and the results of data analyses. The software is designed using a shell based architecture making application to any geographic location simple and straightforward.In the present paper, COASTMAP is linked with OILMAP to provide a fully operational, real-time system that allows prediction of circulation, winds and oil spill trajectory and fate for estuarine and coastal sea areas. System performance is illustrated by the simulation of the trajectory of oil tracking buoys during two experiments performed in the lower west passage of Narragansett Bay. Simulation results using several forecast procedures, with/without real-time data, are presented.     

Environmental assessment of waste incineration in a life-cycle-perspective (EASEWASTE).

A model for life-cycle assessment of waste incinerators is described and applied to a case study for illustrative purposes. As life-cycle thinking becomes more integrated into waste management, quantitative tools for assessing waste management technologies are needed. The presented model is a module in the life-cycle assessment model EASEWASTE. The module accounts for all uses of materials and energy and credits the incinerator for electricity and heat recovered. The energy recovered is defined by the user as a percentage of the energy produced, calculated on the lower heating value of the wet waste incinerated. Emissions are either process-specific (related to the amount of waste incinerated) or input-specific (related to the composition of the waste incinerated), while mass transfer to solid outputs are governed by transfer coefficients specified by the user. The waste input is defined by 48 material fractions and their chemical composition. The model was used to quantify the environmental performance of the incineration plant in Aarhus, Denmark before and after its upgrading in terms of improved flue gas cleaning and energy recovery. It demonstrated its usefulness in identifying the various processes and substances that contributed to environmental loadings as well as to environmental savings. The model was instrumental in demonstrating the importance of the energy recovery system not only for electricity but also heat from the incinerator.     

Hazardous Substance Research Centers program: An incubator for remediation research

The Hazardous Substance Research Center (HSRC) was established by the U.S. Environmental Protection Agency (EPA) to assist in the implementation of Superfund and to address major hazardous substance environmental problems at a regional level. Over the past 12 years, the HSRC program has produced more than 1,200 peer‐reviewed technical articles, 27 patents and licenses, 21 new technologies for the remediation marketplace, and provided technical assistance to more than 300 communities. Research, technology transfer, and training are conducted by five regional multi‐university centers, which focus on different aspects of hazardous substance management. Areas of focus include urban environments, contaminated sediments, natural remediation and restoration technologies, abandoned mine lands, and chlorinated solvents in groundwater. This article provides an overview of the five HSRC programs including current areas of research, field studies, and technology transfer Internet links to access research results and remediation technology information. © 2003 Wiley Periodicals, Inc.     

Nanoremediation and International Environmental Restoration Markets

Nanoscale zero‐valent iron (nZVI) is the most commonly used nanoremediation material. While there has been a reasonable level of application of nZVI technologies for in situ remediation in the United States, its utilization across Europe has been much more limited. There has been significant uncertainty about the balance between deployment risks and benefits for nanoparticles (NPs), which has affected the regulatory position in several countries. Some member states of the European Union (EU) take a strong precautionary view of the risks from the deployment of NPs into the subsurface, preventing the adoption of the technology. This article provides a risk–benefit assessment for nZVI based on published information and describes the steps that will be taken by a major European research project (NanoRem), as part of its work to provide a basis for better informed decision making in European environmental restoration markets. A key part of this process is dialogue between practitioners and researchers. NanoRem therefore has an active process of communication with different stakeholder networks (regulators, service providers, and site owners). NanoRem hopes to stimulate a consensus on appropriate use of nanoremediation and thereby stimulate effective technology transfer to the European remediation market. ©2015 The Authors     

Survey on readability of online information for upgrading understandability of biomass energy technology

Waste management contributes to renewable energy such as biodiesel production from processes of various types of biomass including vegetable oils, animal fats, and waste of edible oil. Successful waste management effort is influenced by people concern about benefit of waste management including for renewable energy from biomass. It involves their understanding initiated by literacy on biomass energy. To help increase literacy on waste recycle and biomass energy technology, we study readability of online information regarding biomass energy in Indonesian language (Bahasa Indonesia). Indonesia is considered as one of biomass-rich country with a little utilization for energy. The readability is studied by combining two approaches: measurement by readability standard and survey on readability confirming measurement by the standard. This study focuses on the confirmation survey readability standard measured on biomass online information in Indonesian language. In the survey, 19 online text materials were read by respondents and they were asked to give their impression whether the texts are easy or difficult to understand. From this study, what factors influence understandability of text information are shown. The results could be a guidance for preparing text information to raise people concern on waste recycle and renewable energy in general.     

Field application of reactive iron walls for in-situ degradation of volatile organic compounds in groundwater

Reactive walls containing metallic iron have been installed at several commercial sites in the United States to degrade chlorinated organic compounds in groundwater. Although the results of laboratory studies conducted to determine reaction mechanisms have been widely disseminated, little information has been published on the full-scale application of this technology. This article describes the construction, implementation, and cost of in-situ reactive walls at three commercial sites.     

Status and trends in bioremediation treatment technology

This article is a critical analysis of the treatment potential of bioremediation technology to degrade eight major environmental pollutants, polycyclic aromatic hydrocarbons, phenols, pentachlorophenols, creosote, polychlorinated biphenyls, trichloroethylene, chlorobenzoates, and chlorophenols. The discussion includes information on transformation mechanisms, identification of intermediate metabolites, elucidation of partial or complete pathways, effects of environmental parameters, as well as current and future industrial application. Results indicate that bioremediation used in conjunction with other physical and chemical treatment methodologies can effectively transform most prevalent nonchlorinated organic contaminants and some chlorinated contaminants, such as creosote and pentachlorophenol, into innocuous materials. Successful biodegradation of several other chlorinated organic compounds, notably polychlorinated biphenyls and trichloroethylene, is currently possible only under controlled laboratory conditions. Future successful field applications, however, appear promising.