我国城市污水厂延伸污泥处理与处置责任

探讨延伸城市污水处理厂的职能,使污泥的"生产者"承担起污泥处理和处置的环境责任,激励其全面关注进水有机物的最终无害化,将污泥处理以及最终处置(如土地填埋、焚烧或资源化等)的工程造价、运行费用以及相应的环境影响均纳入城市污水处理厂进行考虑,这样将对城市污水厂的环境管理观念带来革命性的变化。     

多目标优化方法在城市污水厂汇水区污染源总量控制规划中的应用

在城市污水处理厂汇水区实行污染源总量控制,应该避免与城市污水处理厂重复治理.针对这个问题,提出难降解有机物控制的多目标准则指标,建立了多目标优化模型.     

城市污水处理厂污泥处理处置的政策分析

简要介绍了城市污水处理厂污泥处理处置技术，提出污泥产业发展政策的建议，指出土地利用是符合我国国情的污泥处置的方向之一：污泥处理技术主要有减量化、浓缩、脱水、消化、堆肥等；污泥处置技术主要有焚烧、填埋、土地利用、建材利用等。污泥处理处置应按照减量化、稳定化、无害化原则，鼓励污泥资源化综合利用。合理确定污水处理厂污泥处理处置设施的布局和设计规模；鼓励对污泥处理处置给与税、费优惠政策，明确将污泥处理处置的运营费用列入污水排污收费范围，建立科学的价格补偿机制；政府在污泥产业发展中起着较为重要的作用，主要体现为服务与监督，包括承诺、保障和协调三个方面。     

广州大坦沙污水处理厂挥发有机物的去除及其向空气中的排放

对广州大坦沙污水处理厂各工艺阶段污水中挥发性有机物(VOCs)的测试表明,进水中主要有害VOCs为苯系物和卤代烃;进水和出水比较,苯 甲苯、乙苯、二甲苯(合称BTEX) 的去除率接近100%,污水中几种主要卤代烃的去除效率范围为79%—89%.VOCs主要的去除作用发生在生物反应池,特别是厌氧阶段,本研究还对污水处理厂几种典型挥发有机物排放到周围空气中的量进行了理论估计,计算表明卤代烃进入空气中的比例高于BTEX.     

城市污水处理厂沼气发电的两种方式

作为污泥厌氧消化处理的副产品,沼气是城市污水厂极具有使用价值的能源,本文主要介绍了城市污水处理厂沼气发电的两种方式：沼气发电机和沼气燃烧电池发电。     

海水利用后排水对城市污水处理厂生物处理的影响

对沿海城市海水利用后，含海水污水对城市污水处理厂生物处理系统可能造成的影响进行了研究、试验，结果表明。当海水比例不超过35％时，不会对生物处理系统造成严重冲击，处理出水能够达标排放。     

不同添加剂对鸡粪堆肥中氨气和温室气体排放的影响

堆肥是将畜禽粪污进行资源化的有效手段之一,但是氮素的流失会造成堆肥产品质量的降低,堆肥过程排放的氨气(NH₃)和温室气体(N₂O、CH₄、CO₂)会加剧空气污染和温室效应。减少堆肥过程中这些气体的排放,不仅可以提高堆肥产物的氮素含量,还可以减缓空气污染和温室效应。前期研究表明,加入添加剂(沸石、过磷酸钙和硫酸亚铁的混合物)或添加剂与菌株联用可以显著减少NH₃和N₂O的排放、实现堆肥产物保氮。为了进一步明确这3种添加剂对于堆肥中NH₃和温室气体的排放影响,选用鸡粪作为原料,将沸石、过磷酸钙、硫酸亚铁进行配伍组合,共设置8个试验处理进行室内模拟堆肥。结果表明,添加过磷酸钙和硫酸亚铁的处理(GL)对于NH₃的减排效果最好,为39.00%;添加沸石和过磷酸钙的处理(FG)对N₂O的减排效果最好,为7.19%;通过数据比较发现,堆肥氮损失中主要是由于NH₃的排放。CO_2...     

大气污染物排放清单的建立及不确定性

本文在调研国内外大气污染物排放清单的基础上,总结了清单编制的基本程序,介绍大气污染物排放清单的建立,包括技术路线和计算方法,以及清单的管理、改善及质量保证与控制计划。不确定性分析是完善清单的重要方面,本文阐述了清单不确定性的来源及定量、定性的评价方法。     

城市污水处理厂微生物气溶胶污染和粒径分布特征

城市污水处理厂微生物气溶胶的污染与控制逐渐成为人们关注的热点问题。为明确城市污水处理厂微生物气溶胶浓度和粒径分布特征,选择鄂尔多斯市某城市污水处理厂的格栅间、配水池、氧化沟、二沉池、污泥脱水间和厂区门口6个功能区为对象,对各功能区产生的异养细菌、真菌和放线菌气溶胶浓度分布、污染特性和微生物粒子粒径分布特性进行研究。结果表明,该污水处理厂不同功能区内异养细菌、真菌和放线菌的浓度分布存在显著性差异,其中二沉池和污泥脱水间产生的异养细菌和放线菌浓度均较高,真菌浓度较高的区域为厂门口和二沉池;根据相关微生物气溶胶污染评价标准,污泥脱水间逸散的异养细菌浓度均达到污染级,二沉池、氧化沟和厂门口逸散的异养细菌浓度达轻微污染级,格栅间和配水池未受污染,而真菌浓度在各个功能区均未受到污染;各功能区产生的异养细菌、真菌和放线菌粒子粒径分布无明显差异,异养细菌、真菌和放线菌粒子粒径分别集中在第1、4级,第3、4级和第1、2、3级,大体上均呈正态分布;各功能区均逸散出一定比例的可以直接吸入人体呼吸道的微生物粒子,可能对人体健康具有一定的潜在风险。研究结果可为城市污水处理厂运行过程中微生物气溶胶的污染控制提供科学依据。     

蜡烛燃烧产生的亚微米颗粒物的数量排放因子

蜡烛燃烧产生的亚微米颗粒物(在10nm-500nm范围内),稳定燃烧排放的颗粒物呈单峰正态分布,而非稳定燃烧呈近似双峰正态分布.将现场测得的浓度数据通过气溶胶动力方程转化为排放因子.结果表明,蜡烛燃烧产生的颗粒物在经过一段时间历程后,粒径谱会发生较大的变化,纳米级颗粒物逐渐消失,颗粒物的粒径有所增大.蜡烛在稳定燃烧环境下产生的亚微米颗粒物的数量排放因子为4.05×1012±0.73×1012个·g-1,在非稳定燃烧下的排放因子为1.49×1012±0.32×1012个·g-1.     

Microplastics in municipal wastewater treatment plants: a case study of Denizli/Turkey

● High amounts of microplastics are released to receiving media from WWTPs. ● The effect of classical treatment processes on MP removal is important. ● MP load in the effluent of WWTPs is important for developing treatment technology. ● Additional physical treatment could help further reduce MP discharge. Plastic particles smaller than 5 mm are microplastics. They are among the significant pollutants that recently attracted attention. Great quantities of microplastics enter the sewage system daily and reach wastewater treatment plants (WWTPs). As a result, WWTPs are potential microplastic sources. Hence, they create a pathway for microplastics to reach aquatic environments with treated wastewater discharge. Studies on microplastic characterization in WWTPs have gained momentum in academia. This study investigates the abundance, size, shape, color, polymer type, and removal efficiencies of microplastics in a municipal wastewater treatment plant (WWTP) in Denizli/Turkey. The results showed that the dominant microplastic shape in wastewater samples was fibers (41.78%–60.77%) in the 100–500 µm (58.57%–80.07%) size range. Most of the microplastics were transparent-white (32.86%–58.93%). The dominant polymer types were polyethylene (54.05%) and polyethylene vinyl acetate (37.84%) in raw wastewater. Furthermore, the microplastic removal efficiencies of the Denizli Central WWTP as a whole and for individual treatment units were evaluated. Although the microplastic pollution removal efficiency of the Denizli Central WWTP was over 95%, the microplastic concentration discharged daily into the receiving environment was considerably high (1.28 × 10¹⁰ MP/d). Thus, Denizli Central WWTP effluents result in a high volume of emissions in terms of microplastic pollution with a significant daily discharge to the Çürüksu Stream.     

Malodor emission characteristics in rendering plants

Odor emission characteristics in rendering plant was studied by measuring 14 kinds of odorants in the emission gases from main processes: cooking of raw bone, concentrating of glue, refining of fat, and drying of bone. The odor from cooker had higher concentration of all odorous components compared with the other processes. From any process except the drying one, there were detected sulfur‐containing odorants in very high concentration. Of the odorants, concentrations of hydrogen sulfide and methyl mercaptan were higher. The odor from drying bed had comparatively low concentration of sulfur‐containing odorants, and higher concentration of ammonia and trimethylamine were detected. Lower fatty acids were detected from all processes though the concentrations were low. In the odorous gases taken at both the emission source and borderline side, high correlations were recognized between organoleptic test value and concentrations of measured odorants.     

Occurrence and migration of microplastics and plasticizers in different wastewater and sludge treatment units in municipal wastewater treatment plant

● Reduce the quantifying MPs time by using Nile red staining. ● The removal rate of MPs and PAEs in wastewater and sludge were investigated. ● MPs and PAEs were firstly analyzed during thermal hydrolysis treatment. ● The removal of PAEs from wastewater and sludge was mainly biodegradation. Microplastics (MPs) and plasticizers, such as phthalate esters (PAEs), were frequently detected in municipal wastewater treatment plants (MWTP). Previous research mainly studied the removal of MPs and PAEs in wastewater. However, the occurrence of MPs and PAEs in the sludge was generally ignored. To comprehensively investigate the occurrence and the migration behaviors of MPs and PAEs in MWTP, a series of representative parameters including the number, size, color, shape of MPs, and the concentrations of PAEs in wastewater and sludge were systematically investigated. In this study, the concentrations of MPs in the influent and effluent were 15.46±0.37 and 0.30±0.14 particles/L. The MP removal efficiency of 98.1% was achieved and about 73.8% of MPs were accumulated in the sludge in the MWTP. The numbers of MPs in the sludge before and after digestion were 4.40±0.14 and 0.31±0.01 particles/g (dry sludge), respectively. Fourier Transform Infrared Spectroscopy (ATR FT-IR) analysis showed that the main types of MPs were polyethylene terephthalate (PET), polypropylene (PP), polyethylene (PE), and polystyrene (PS). Six PAEs, including phthalate (DMP), diethyl phthalate (DEP), diisobutyl phthalate (DIBP), ortho dibutyl phthalate (DBP), butyl benzyl phthalate (BBP), and bis(2-ethyl) hexyl phthalate (DEHP), were detected in the MWTP. The concentrations of total PAEs (ΣPAEs) in the influent and effluent were 76.66 and 6.28 µg/L, respectively. The concentrations of ΣPAEs in the sludge before and after digestion were 152.64 and 31.70 µg/g, respectively. In the process of thermal hydrolysis, the number and size of MPs decreased accompanied by the increase of the plasticizer concentration.     

糖类在城市污水生物处理系统中的去除机理

研究了厌氧、缺氧和好氧状态下淀粉在城市污水生物处理系统中水相和泥相中吸附和降解的动力学参数,建立了淀粉在厌氧、缺氧、好氧状态下的降解动力学模型,并对模型预测的结果进行了验证.结果表明,Fritz-Schlunder模型可以较好地描述糖类在厌氧、缺氧和好氧污泥上的吸附过程,吸附的大分子糖类迅速水解为低一级的高分子物质和小分子物质;厌氧降解速率系数K厌、缺氧的降解速率系数K缺与好氧的降解速率常数的比值分别为0.40和0.64;所建立的动力学模型能较好的预测出水糖类的浓度(相对误差<10%).     

Short-term prediction of influent flow rate and ammonia concentration in municipal wastewater treatment plants

The prediction of the influent load is of great importance for the improvement of the control system to a large wastewater treatment plant. A systematic data analysis method is presented in this paper in order to estimate and predict the periodicity of the influent flow rate and ammonia （NH3） concentrations： 1） data filtering using wavelet decomposition and reconstruction; 2） typical cycle identification using power spectrum density analysis; 3） fitting and prediction model establishment based on an autoregressive model. To give meaningful information for feedforward control systems, predictions in different time scales are tested to compare the corresponding predicting accuracy. Considering the influence of the rainfalls, a linear fitting model is derived to estimate the relationship between flow rate trend and rain events. Measurements used to support coefficient fitting and model testing are acquired from two municipal wastewater treatment plants in China. The results show that 1） for both of the two plants, the periodicity affects the flow rate and NH3 concentrations in different cycles （especially cycles longer than 1 day）; 2） when the flow rate and NH3 concentrations present an obvious periodicity, the decreasing of prediction accuracy is not distinct with increasing of the prediction time scales; 3） the periodicity influence is larger than rainfalls; 4） the rainfalls will make the periodicity of flow rate less obvious in intensive rainy periods.     

Upgrade of three municipal wastewater treatment lagoons using a high surface area media

Lagoon-based municipal wastewater treatment plants (WWTPs) are facing difficulties meeting the needs of rapid population growth as well as the more stringent requirements of discharge permits. Three municipal WWTPs were modified using a high surface area media with upgraded fine-bubble aeration systems. Performance data collected showed very promising results in terms of five-day biochemical oxygen demand (BOD₅), ammonia (NH₃) and total suspended solids (TSS) removal. Two-year average ammonia effluents were 4.1 mg·L^-1 for Columbia WWTP, 4 mg·L^-1 for Larchmont WWTP and 2.1 mg·L^-1 for Laurelville WWTP, respectively. Two- year average BOD₅ effluents were 6.8, 4.9 and 2.7 mg·L^-1, and TSS effluents were 15.0, 9.6 and 7.5 mg·L^-1. The systems also showed low fecal coliform (FC) levels in their effluents.     

作物地上部氨排放及对大气氮沉降的吸收

为研究作物地上部分氨排放以及对大气氮沉淀的吸收情况,以水稻(Oryza saliva L.)品种武运粳7号和小麦(Triticumaestivum L.)品种扬麦15为例.在盆栽条件下,利用~15N同位素示踪技术,采用探索性的研究方法,初步分析了水稻成熟期植株NH_3排放和小麦植株直接吸收的大气沉降氮.结果表明,土培的水稻品种武运粳7号地上部植株成熟期排放氨氮(NH_3-N)量约占当季总施氮(N)量的(0.50±0.21)%;收获后水稻植株不同部位~(15)N丰度值以根部最高,茎叶次之,籽粒最低,这与植株体内养分的运移顺序变化一致;贫化~(15)N小麦砂培试验测定的包括植株直接吸收在内的大气氮沉降数量为N(14.8±4.3)kg·hm~(-2),低于国外类似方法以其它作物作为研究对象的测定结果.     

华南地区11种高等水生维管植物净化城镇污水效益评价

采用定标、单项评分和综合评价的方法，从净化能力、抗逆性、管理、资源化程度和景观５方面，对华南地区筛选出的１１种高等维管植物净化城镇污水效益进行了评价。结果表明：黑藻、假马齿苋和水筛对污水的净化能力与风眼莲相当，而综合效能优于风眼莲。评价结果为城镇污水的处理提供了新的资料。