Assessment of noise level in sundry processing and manufacturing industries in Ilorin metropolis, Nigeria

In this work, noise level in five selected processing and manufacturing industries in Ilorin are evaluated and compared. Emphasis is given to noise emitted by individual industrial machinery from the selected industries. Event L _Aeq and L _N cycles were studied to identify the noisy machines and to generate baseline data. Findings show that hammer mill machine from mineral-bearing rock-crushing mills produced the highest average noise [98.4 dB(A)], an electric generator 1 [95.6 dB(A)] from the soft drink bottling industry, an electric generator [97.7 dB(A)] from the beer brewing and bottling industry, a vacuum pump [93.1 dB(A)] from the tobacco making industry, and an electric generator 2 [94.1 dB(A)] from the mattress-making industry. The highest and lowest average noise exposure levels are recorded in mineral-bearing rock-crushing mills [93.16 dB(A)] and the mattress making industry [84.69 dB(A)], respectively. The study shows that, at 95% confidence level, there is significant difference (P < 0.05) in noise levels in the industries surveyed. The percentages of machines that emit noise above Federal Environmental Protection Agency and Occupational Safety and Health Administration recommendations [90 dB(A)] are from the soft drink bottling industry (83.3%), the beer brewing and bottling industry (42.9%), the tobacco making industry (71.4%), the mattress making industry (11.1%), and minerals crushing mills (87.5%). In the past 20 years, the noise levels in the soft drink bottling industry were reduced by 0.58 dB(A), and those of the beer brewing and bottling industry were reduced by 9.66 dB(A). However, that of the mattress making industry increased by 2.69 dB(A). On average, the noise level in these industries has been reduced by 2.52 dB(A). The results of this study show that the noise control measures put in place have significant impacts on the noise exposure level in the industries surveyed.     

A comparative study of noise pollution levels in some selected areas in Ilorin Metropolis, Nigeria

The noise pollution is a major problem for the quality of life in urban areas. This study was conducted to compare the noise pollution levels at busy roads/road junctions, passengers loading parks, commercial, industrial and residential areas in Ilorin metropolis. A total number of 47-locations were selected within the metropolis. Statistical analysis shows significant difference (P < 0.05) in noise pollution levels between industrial areas and low density residential areas, industrial areas and high density areas, industrial areas and passengers loading parks, industrial areas and commercial areas, busy roads/road junctions and low density areas, passengers loading parks and commercial areas and commercial areas and low density areas. There is no significant difference (P > 0.05) in noise pollution levels between industrial areas and busy roads/road junctions, busy roads/road junctions and high density areas, busy roads/road junctions and passengers loading parks, busy roads/road junctions and commercial areas, passengers loading parks and high density areas, passengers loading parks and commercial areas and commercial areas and high density areas. The results show that Industrial areas have the highest noise pollution levels (110.2 dB(A)) followed by busy roads/Road junctions (91.5 dB(A)), Passengers loading parks (87.8 dB(A)) and Commercial areas (84.4 dB(A)). The noise pollution levels in Ilorin metropolis exceeded the recommended level by WHO at 34 of 47 measuring points. It can be concluded that the city is environmentally noise polluted and road traffic and industrial machineries are the major sources of it. Noting the noise emission standards, technical control measures, planning and promoting the citizens awareness about the high noise risk may help to relieve the noise problem in the metropolis.     

Characterization of groundwater quality in three settlement areas of Enugu metropolis, southeastern Nigeria, using multivariate analysis

Groundwater quality of Enugu metropolis comprising Achara Layout, Abakpa, and Emene settlement areas has been studied and characterized using multivariate statistical techniques. Three principal components (PCs) which explain 77.93 and 88.17 % were extracted at Achara Layout and Abakpa, respectively, while two PCs which explain 83.13 % were extracted at Emene. PC 1 of all the three areas reflects weathering of the host rock minerals and constitutes the dominant controlling process for all the areas. PC 2 of the three areas and PC 3 of Achara Layout and Abakpa can be attributed to both weathering/leaching of feldspathic minerals of host rocks (giving rise to alkaline earth metals in the groundwater) and anthropogenic activities. Cluster analysis defined groups of groundwater samples with similar hydrochemical characteristics. Two groups in Achara Layout and Emene fell into the high pollution loading class, while only one group in Abakpa fell into this class. The variation in the groundwater quality within each of the three areas may be explained in terms of groundwater flow directions, land use, and well depths. Discriminant analysis showed that the discriminating parameters of the groundwater quality of Achara Layout, Abakpa, and Emene are total dissolved solids, Na and Mg, and Cl, respectively. This study has revealed that the groundwater quality of the areas is controlled by both geogenic and anthropogenic processes and activities. The generated groundwater quality spatial variation models for each area will serve as a tool in the planning and development of groundwater in that region.     

Spatial pattern of Solid Waste generation of Ilorin—Nigeria

The generation pattern of Solid Waste has not been identified in most of the developing world. Investigation on the generation of waste in Ilorin, shows that the generation pattern differs from most acclaimed pattern of the developed world. By far, leaf waste constitutes the most generated waste. However, the investigation shows that the higher the number in the family, the less the amount of leaf waste generated. Paper and food left-over form twenty-seven and twenty per cent of waste generated respectively and high education seems to be an important factor in the amount of metal waste produced.     

Measuring waste generation in third world cities: A case study of Ilorin,Nigeria

Problems associated with urban wastes are now at crisis stage in Nigeria. All efforts made to solve the problems have failed, as the efforts were directed towards instant cleaning rather than long lasting programs to cope with problems associated with environmental sanitation. Measurements were taken of the domestic waste generated by randomly selected households in Ilorin, to predict the generation rate for the city. The data was subjected to various analyses. The models used in developed nations were found inappropriate to predict the waste generation rate of the people at Ilorin because of cultural factors. Various methods to cope with the environmental sanitation problems of cities of developing areas were then suggested.     

Assessment of trace metals using lichen transplant from automobile mechanic workshop in Ile-Ife metropolis,Nigeria

The level of air pollution around the automobile mechanic workshops has been generally overlooked. This study, examined the level of trace metals in automobile mechanic workshops and the suitability of using transplanted lichen thalli of Lepraria incana for measuring air pollution in such areas. Samples of the lichen thalli were transplanted into seven different sites and were attached to the bark of trees at each site. The samples were harvested from the sites after 3-month exposure. Concentrations of Pb, Cu, Cd, Fe, Zn, and S content were determined using an atomic absorption spectrophotometer. Results showed that there was a significant difference in the trace metals concentrations across the sites (p?<?0.05). The analyzed lichen samples showed a range of 91.26–119.35 ppm for Fe, 30.23–61.32 ppm for Zn, 1.25–2.45 ppm for Cu, 0.017–0.043 ppm for Cd, 0.018–0.051 ppm, and 0.37–0.42 ppm for S. From the study, sites 6 and 7 presented higher concentrations of Cd, Pb, and Zn than other sites. The enrichment factor calculated showed that Zn, Cd, and Pb were greatly enriched from the workshops. The trend in the concentration of these heavy metals suggests that activities in these workshops might become a major source of certain heavy metals in the environment and if the pollution activities persist, it might become worrisome over time.     

Evaluation of airborne lead levels in storage battery workshops and some welding environments in Kumasi metropolis in Ghana

Airborne lead levels were assessed in nine workshops, three each from battery, electronic repair, and welding sources within the Kumasi Metropolis in Ghana. Samples were collected at 0, 2.5, and 5.0 m away from the emission source at the workshops during working hours and another at 5.0 m during break hours. Airborne lead particulates were collected and analyzed using the filter membrane technique and flame atomic absorption spectrophotometry, respectively. There were significant differences (p ≤ 0.05) among the air lead levels from the workshops. Workshop 3b produced the highest significant values of air lead concentrations of 2,820.31 ± 53.89, 2,406.74 ± 71.87, 754.55 ± 72.52, and 549.01 ± 67.30 μg/m³ at distances of 0, 2.5, 5.0, and 5.0 m (break-time measurement), respectively, while workshop 1w significantly produced the lowest air lead concentration values of 261.06 ± 21.60, 190.92 ± 36.90, 86.43 ± 16.26, and 61.05 ± 3.88 μg/m³ at distances of 0, 2.5, 5.0, and 5.0 m (break-time measurement), respectively. The air lead levels reduced with distance from emission source at the workshops. At all the distances of measurement at working hours, the airborne lead levels were higher than the World Health Organization standard of 50 μg/m³ and exceeded the threshold limit values of 100 to 150 μg/m³ recommended in most jurisdictions. Workers and people in the immediate environs were exposed to air lead levels that were too high by most international standards, thus posing a serious threat to their health.     

Assessment of blood and urine lead levels of some pregnant women residing in Lagos, Nigeria

Assessment of lead in blood (BLL) and lead in urine (ULL) of some non-occupationally exposed, nonsmoking 214 pregnant Nigerian women, aged 17 to 49 years, and resident in Lagos was carried out using atomic absorption spectrometry with control subjects consisting of 113 nonpregnant women. From results, the mean BLL and ULL (μg/dL) for pregnant women (59.5 ± 2.1; 29.4 ± 1.1) were significantly (p?<?0.01) higher than the values obtained for nonpregnant women (27.7 ± 1.1; 9.2 ± 0.6). BLL found in women in the first, second, and third trimesters were 57.2 ± 2.3, 61.6 ± 2.2, and 63.1 ± 1.8, respectively. ULL could not serve to predict BLL due to weak correlations (r?=???0.06 to +?0.15; p?>?0.10). Study is a contribution to blood and urine lead status of Nigerian pregnant women, being relevant for healthcare management purposes, public health decision making, and possible primary prevention activities.     

Trace metal levels in fruit juices and carbonated beverages in Nigeria

Trace metal levels in selected fruit juices and carbonated beverages purchased in Lagos, Nigeria were determined using atomic absorption spectrophotometer (Unicam model 969) equipped with SOLAAR 32 windows software. Fruit juices analysed were grape, pineapple, apple, orange, lemon juices and their brand names were used. Some carbonated drinks were also evaluated for metal levels. Trace metals investigated were Cr, Cu, Pb, Mn, Ni, Zn, Sn, Fe, Cd and Co. Trace metal contents of fruit juices were found to be more than the metallic contents of carbonated beverages. Pb level in the fruit juices ranged from 0.08 to 0.57 mg/l but was not detected in the carbonated drinks. Concentrations of Pb in lemon juice and Mn in pineapple juice were relatively high. Cd and Co were not detected in the selected juices and beverages. Additionally, Pb, Cu, Cr and Fe were not detected in canned beverages but were present in bottled beverages. However, the metal levels of selected fruit juices and carbonated beverages were within permissible levels except for Mn in pineapple juice and Pb in lemon juice.     

Evaluation of the impact of asbestos wastes on soils in Emene-Enugu,Southeastern Nigeria

This study investigated the impacts of asbestos wastes on soils in Emene-Enugu, southeastern Nigeria, generated by the activities of a major asbestos products manufacturing company in southeastern Nigeria. The methods of investigation included vertical electrical sounding (VES), 2-D horizontal resistivity profiling (HRP), induced polarization (IP) survey, chemical analysis of plant tissues and standard penetration tests of soil samples. The 2-D HRP and IP identified six closed waste pits alongside the two active pits. The VES revealed four geoelectrical layers in the area: from bottom to top; the inferred lithologies included dark shale, clay, gravel and recent sands. The geochemical data results revealed that Cd concentration of the soils of the waste pits is above the contaminated land exposure assessment soil guideline value for residential and allotment land uses. The geochemical pollution indices classified the soils as “unpolluted” to “extremely polluted”. Bioconcentration factor of Pb in plant tissues was found to be above recommended limits of 0.045. The geotechnical parameters indices revealed that the soils varied from “very soft” to “stiff” and “very loose” to “medium”. Soils of the active pits have very low strength and bearing capacity while closed pits have high strength and bearing capacity. It may be safe, therefore, to conclude that as the wastes are completely turned into soils, they will assume geotechnical properties similar to those of natural soils.     

A comparative study of noise levels in some residential,industrial and commercial areas of Delhi

The measurements of noise levels in residential, industrial and commercial areas in the capital city of India, Delhi, were carried out in the month of March and April, 1992. Six sites in residential areas, four in industrial areas and nine in commercial areas were chosen, which were situated in different parts of Delhi. The results of statistical analysis of sound pressure levels show that commercial areas have the highest noise levels followed by industrial and residential areas. Spectral distribution of noise at octave band frequencies have also been presented for the above mentioned areas.     

A study of heavy metal pollution of Asa River, Ilorin. nigeria; trace metal monitoring and geochemistry

Chemical and mineralogical characterization of sediments collected from seven different locations along Asa River in Ilorin, Nigeria have been carried out. The total concentration of Mn, Cr, Fe, Zn and Cu were monitored using Total Reflection X-ray Fluorescence (TXRF). The range of concentration of these metals were: Mn (179.9–469.4, Fe (1998.4–4420.4) Cr (3.0–11.3), Zn (26.6–147.6), Cu (1.9-13.3) mg kg⁻¹. The mineralogical composition was determined using X-ray diffraction (XRD) method and this was complemented with the Infrared Spectroscopy. It was found that the sediments of Asa River had predominantly quartz, and goethite was present in five of the seven locations. Chromite (FeCr₃O₄) and pyrite (FeS) were also identified at some locations along the River. Higher enrichment factors were calculated for Zn, Cr, Mn, and Fe in the sediment indicating anthropogenic source of contamination. Pyrite was prominent at a location receiving effluent from a detergent industry and near a refuse dumpsite.     

Sampling approaches to predict urban street noise levels using fixed and temporary microphones

Requirements for static (prediction of L(den) and diurnal averaged noise pattern) and dynamic (prediction of 15 min and 60 min evolution of L(Aeq) and statistical levels L(A90,)L(A50) and L(A10)) noise level monitoring are investigated in this paper. Noise levels are measured for 72 consecutive days at 5 neighboring streets in an inner-city noise measurement network in Gent, Flanders, Belgium. We present a method to make predictions based on a fixed monitoring station, combined with short-term sampling at temporary stations. It is shown that relying on a fixed station improves the estimation of L(den) at other locations, and allows for the reduction of the number of samples needed and their duration; L(den) is estimated with an error that does not exceed 1.5 dB(A) to 3.4 dB(A) according to the location, for 90% of the 3 × 15 min samples. Also the diurnal averaged noise pattern can be estimated with a good accuracy in this way. It was shown that there is an optimal location for the fixed station which can be found by short-term measurements only. Short-term level predictions were shown to be more difficult; 7 day samples were needed to build models able to estimate the evolution of L(Aeq,60min) with a RMSE ranging between 1.4 dB(A) and 3.7 dB(A). These higher values can be explained by the very pronounced short-term variations appearing in typical streets, which are not correlated between locations. On the other hand, moderately accurate predictions can be achieved, even based on short-term sampling (a 3 × 15 minute sampling duration seems to be sufficient for many of the accuracy goals set related to static and dynamic monitoring). Finally, the method proposed also allows for the prediction of the evolution of statistical indicators.     

Evaluation of levels, sources and distribution of toxic elements in PM10 in a suburban industrial region, Rio de Janeiro, Brazil

The Oswaldo Cruz Foundation Campus (FIOCRUZ), in a suburban region of the city of Rio de Janeiro, was selected as a case study to assess the pollution released from vehicle and industrial facilities in Basin III, the most polluted area of the city. Concentrations of particulate matter (PM10) and trace metals in airborne particles were determined in an intensive field campaign. The samplings were performed every six days for 24 h periods, using a PM10 high volume sampler, from September 2004 to August 2005. PM10 mass concentrations were determined gravimetrically and the metals by ICP-OES. For PM10, the arithmetic mean for the period is 169 ± 42 μg m⁻³ which is 3.4 times the national recommended standard of 50 μg m⁻³. Additionally, 51% of the samplings exceeded the recommended 24 h limit of 150 μg m⁻³. Ca, Mg, Fe, Zn and Al were the metals that presented the higher concentrations. The correlation matrix gave two main clusters and three significant principal components (PC). Both PC1 and PC2 are associated to crustal, vehicular and industrial emissions while PC3 is mainly associated to geological material. Enrichment factors for Zn, Cu, Cd and Pb indicate that for these elements, anthropic sources prevail over natural inputs. PM10 levels showed a good correlation with hospital admissions for respiratory diseases in children and elderly people.     

Environmental impact assessment of Attenda abattoir, Ogbomoso southwestern Nigeria on surface and groundwater quality using geo-electrical imaging and microbiological analysis

The impact of Attenda abattoir, Ogbomoso southwestern Nigeria on four water sources was investigated using geoelectrical imaging and microbiological analysis. 2D electrical resistivity imaging indicated groundwater contamination by leachate from the abattoir. Electrical resistivity values measured by the traverse run directly on the waste dump and other areas impacted by the waste from the abattoir are generally very low (6.68-16.7 ?m) in comparison to other positions (135-288 ?m). The total viable bacteria count of the water samples ranged from 0.49 × 10(6) to 2.85 × 10(8) cfu/ml and all samples are contaminated with coliforms with the most probable number (MPN)/100 ml ranging from 110 to ≥ 1,600 MPN/100 ml. Among bacteria isolated from the study site (n = 95), resistance to eight antibiotics ranged from 35.8% to 94%. In addition, 85% of Streptococcus agalactiae (n = 31) and Staphylococci (n = 9) showed haemolytic activity while 92% of all isolates showed β-lactamase activity. These results suggest that operations of the abattoir may impact negatively on surrounding aquatic ecosystem and endanger the health of surrounding residents who use water from the wells for domestic purposes. Furthermore, such aquatic ecosystems may serve as reservoir of antibiotic resistant bacteria.     

Ethnobotanical Study of Fuelwood and Timber Wood Consumption and Replenishment in Ogbomoso, Oyo State, Nigeria

A survey of both urban and rural communities in five Local Government Areas (LGA) of Oyo State in Nigeria showed that 76% of households depend on fuelwood for cooking. The total annual wood consumption for fuelling by bread bakers, food sellers and in domestic cooking was 5984 metric tons for the region. The sawmills in the study area also convert 79 889 metric tons of wood yearly into boards of different grades. Total wood consumption outstrips the quantity of wood extracted from the forests. The balance of over 60 000 metric tons of wood is sourced from neighbouring forest locations. The quantity of wood harvested for various purposes did not show a significant difference (p < 0.05) among the five LGAs. However, a significant difference at p > 0.05 existed in the quantity of wood actually consumed in the various LGAs. Moreover. the number of trees cut down outstrips the number of trees planted with a significant difference (p > 0.05) between the mean quantity of wood removed from the forests and the mean quantity replaced by reforestation. The practice in the study area was that of 'cut-eight-plant-one' which is at variance to the much publicized operation 'cut-one-plant-one'. The study concludes that residents of Ogbomoso in Nigeria have not shown positive disposition to tree planting. It therefore suggests scientific tree conservation strategies aimed at improved burning of fuel wood and maximized use of timber products as complementary efforts to enforced tree planting for conservation of our forests.     

Evaluation of trace heavy metal levels of some fish species sold at retail in Kayseri, Turkey

Cd, Ni, Cr, Zn, Cu and Pb concentrations of muscle tissue of 61 fish samples belonging to six fish species (Sparus auratus, Pomatomus saltatrix, Sarda sarda, Engraulis encrasicholus, Sander lucioperca, Scomber scombrus) retailed in Kayseri, Turkey were determined by flame atomic absorption spectrometry after wet digestion. Cd concentrations of at least 31 fish samples (50.8%) and Pb concentrations of at least six fish samples (9.8%) exceeded the corresponding Turkish permissible limit of 0.05 and 0.2 mg kg(-1) respectively whereas Zn concentrations of 11 fish samples (18%) exceeded the Turkish Food Codex limits of 50 mg kg(-1) for Zn. Cu concentrations of all fish species analyzed (100%) were below the corresponding Turkish legislations of 20 mg kg(-1). No limits were established concerning Ni and Cr concentrations in fish by the Turkish governmental authorities.