Geochemical assessment of metal concentrations in sediment core of Korangi Creek along Karachi Coast, Pakistan

Sediment core from Korangi Creek, one of the polluted coastal locations along the Karachi Coast Pakistan, was collected to trace the history of marine pollution and to determine the impact of industrial activity in the area. Down core variation of metals such as Ca, K, Mg, Al, S, Ti, V, Cr, Mn, Fe, Ni, Cu and Zn was studied in the 72.0 cm core. Nuclear analytical techniques, proton induced X-rays emission (PIXE), was employed to ascertain the chemical composition in sediment core. Grain size analysis and sediment composition of cored samples indicated that Korangi creek sediments are clayey in nature. Correlation matrix revealed a strong association of Ni, Cu, Cr and Zn with Fe and Mn. To infer anthropogenic input, enrichment factor (EF), degree of contamination and pollution load index were calculated. EF showed severe enrichment in surface sediment for Ni, Cu, Cr and Zn, indicating increased industrial effluents discharge in recent years. The study suggests that heavy metal discharge in the area should be regulated. If the present trend of enrichment is allowed to continue unabated, it is most likely that the local food web complexes in the creek might be at highest risk.     

Spatial, temporal, and speciation variations of heavy metals in sediments of Nan'ao Island, a representative mariculture base in Guangdong coast, China

Heavy metals in sediments from Baisha Bay, Nan'ao Island, one of Guangdong Province's largest mariculture bases in Southern China, were investigated. The results display that the concentrations of 6 heavy metals from surface sediments were 0.040-0.220 (Cd), 24.22-39.61 (Pb), 25.30-42.66 (Cr), 10.83-19.54 (Ni), 15.06-39.24 (Cu) and 55.12-141.73 mg kg(-1) (Zn), respectively. The highest concentrations and the greatest increasing rates of heavy metals were found in a sediment core in a fish cage culture area due to receiving sewage discharge, uneaten fish bait, and boat gasoline combustion. Cd was preferentially associated with the acid-soluble fraction and Pb mainly with the reducible fraction in surface sediments. Meanwhile, Cd and Pb displayed greatest labile fractions, indicating anthropogenic origin. A principal component analysis (PCA) revealed three groupings (Cd; Cr, Ni and Cu; Pb and Zn) that mainly result from different distributions of the metals in the various fractions. The ecological risk of the polluted sediments stemmed mainly from Cd, and from Pb and Cu to a lesser degree. It is suggested that the density of fish-stocking be controlled, periodic movement of rafts (cages) be introduced, and the total numbers of net-cages and human activities in the mariculture zones be restricted. in order to facilitate the recovery of the polluted sediment.     

Heavy metal in surface sediments of the Liaodong Bay, Bohai Sea: distribution, contamination, and sources

In an effort to assess the potential contamination and determine the environmental risks associated with heavy metals, the surface sediments in Liaodong Bay, northeast China, were systematically sampled and analyzed for the concentrations of Cu, Pb, Zn, Cr, Ni, As, and Hg. The metal enrichment factor (EF) and geoaccumulation index (I _geo) were calculated to assess the anthropogenic contamination in the region. Results showed that heavy metal concentrations in the sediments generally met the criteria of China Marine Sediment Quality (GB18668-2002); however, both EF and I _geo values suggested the elevation of Pb concentration in the region. Based on the effect-range classification (TEL-PEL SQGs), Cu, Pb, Ni, and As were likely to pose environment risks, and the toxic units decreased in the order: Ni?>?Pb?>?Cr?>?Zn?>?As?>?Cu?>?Hg. The spatial distribution of ecotoxicological index (mean-ERM-quotient) suggested that most of the surface sediments were “low–medium” priority zone. Multivariate analysis indicated that the sources of Cr, Ni, Zn, Cu, and Hg resulted primarily from parent rocks, and Pb or As were mainly attributed to anthropogenic sources. The results of this study would provide a useful aid for sustainable marine management in the region.     

Source identification and assessment of sediment contamination of trace metals in Kogarah Bay,NSW, Australia

The distribution of trace metals (spatial and temporal) and sedimentary fractions were investigated to identify the concentrations and sources of trace metals within Kogarah Bay, NSW, Australia. A total of 59 surface sediments and six subsurface samples from core of the sediment were collected. The contamination factor and pollution load index indices used to evaluate environmental effects of trace metals. The study area was found to be uncontaminated with Cr and Ni, moderately contaminated with As and considerably contaminated with Cu, Zn and Pb. The concentrations of Cr and Ni were below both effect range low and effect range median, while As, Cu, Zn and Pb were slightly above effect range low. The highest concentrations of these trace metals such as Cu, Zn and Pb were found in the north, northwest and southeast of the bay, close to discharge points, stormwater outlets and around boatyards and watercrafts. The spatial distributions of metals were strongly related to muddy particles and organic matter. The temporal sediments of metals declined with increased sediment depth, which reflects accumulation of trace metals since European settlement in this area. Furthermore, the source of the trace metals was found to be stormwater outlets, gasoline fumes, boatyards and other human activities.     

Application of geoaccumulation index and enrichment factor for assessing metal contamination in the sediments of Kafrain Dam, Jordan

An investigation is reported of the degree of metal pollution in the sediments of Kafrain Dam and the origin of these metals. Fourteen sampling sites located at Kafrain Dam were chosen for collecting the surface, cutbank, and dam bank sediment samples. The sediment samples have been subjected to a total digestion technique and analyzed by atomic absorption spectrometer for metals including Pb, Zn, Cd, Ni, Co, Cr, Cu, Mn, and Fe. XRD analyses indicate that the sediments of Kafrain Dam are mainly composed of calcite, dolomite, quartz, orthoclase, microcline, kaolinite, and illite reflecting the geology of the study area. The enrichment factor (EF) and geoaccumulation index (I _geo) have been calculated and the relative contamination levels assessed in the study area. The calculations of I _geo are found to be more reliable than of those of EF. The enrichment of metals in the study area has been observed to be relatively high. I _geo results reveal that the study area is not contaminated with respect to Ni, Co, Cr, Cu, and Mn; moderately to strongly contaminated with Pb; and strongly to extremely contaminated with Cd and Zn. The high contents of Pb, Cd, and Zn in the study area result from anthropogenic activities in the catchment area of the dam site. These sources mainly include the agricultural activities, sewage discharging from various sources within the study area (effluent of wastewater treatment plants, treated and untreated wastewaters, and irrigation return water), and the several industries located in the area. Degrees of correlations among the various metals in the study area are suggested by the results and the intermetallic relationship.     

Distribution and Statistical Analysis of Leachable and Total Heavy Metals in the Sediments of the Suez Gulf

The concentrations of nine heavy metals (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pd and Zn) in the labile and total fractions of muddy and sandy sediment samples collected from twelve sites in Suez Gulf during April 1999 were studied to evaluate the pollution status of the Suez Gulf. The enrichment factors (EF) for each element were calculated. There are extremely high concentrations of Cd, Ni, Pb and slightly concentration of Cr and Cu in both muddy and sandy sediments. The concentration of Zn was moderately high and can be considered as seriously contaminate Metal pollution index (MPI) shows high values ranged between 46 to 156 and 40 to 232 for both sandy and muddy sediments, respectively. Concentrations of heavy metals were normalized against iron for total fraction in both of sandy and muddy sediments. Principal component analysis (PCA) was studied on the data matrix obtained and represented three-factor model explaining 92.22% for labile and 88.82% for total fractions of muddy sediment. The main source of contamination is the offshore oil fields and industrial wastes. This is largely a result of ineffective and inefficient operation equipment, illegal discharge of dirty ballast water from tankers and lack of supervision and prosecution of offenders.     

An assessment of metal contamination risk in sediments of Hara Biosphere Reserve,southern Iran with a focus on application of pollution indicators

The aim of this study was to assess the pollution status of metals in sediments of Hara Biosphere Reserve using pollution indicators. For this purpose, sediment samples from nine locations were collected and characterized for metal content (Pb, Cr, Zn, Cu, and Fe) using the total digestion technique. Comparison of metal concentrations with that of sediment quality guidelines (SQGs) demonstrated no association with negative biological effects for Cu and Zn, while the values of Pb and Cr mainly illustrated to have association with negative biological effects. The results of the geo-accumulation index (I _geo) indicated no contamination for Cr, Cu, Zn, and Fe, while the values of Pb demonstrated to have moderate contamination based on I _geo values. The analysis of the enrichment factor (EF) showed no enrichment for Cu and Zn and minor enrichment for Pb and Cr. Similar results were also found for quantification of contamination (QoC) analysis, where the values of Cu and Zn demonstrated to have a geogenic source of contamination, while the values of Pb and Cr mainly illustrated to have an anthropogenic source of contamination. According to EF and QoC calculations, the values of Cu and Zn were derived mainly from natural processes and exposure of material from the earth’s crust, while the values for Pb and Cr were enriched by anthropogenic activities. The results of the contamination factor (C _f ⁱ ) demonstrated low contamination levels for Fe, Cr, Zn, and Cu and moderate contamination levels for Pb. The pollution load index (PLI), showing the overall contamination of metals, demonstrated moderate pollution status in the study area.     

Evaluating the efficiency of sediment metal pollution indices in interpreting the pollution of Haraz River sediments, southern Caspian Sea basin

The Haraz River is one of the most significant rivers in the southern Caspian Sea basin. Towards the estuary, the river receives discharges of industrial, agricultural, and urban wastes. In the present investigation, bulk concentrations of Cu, Zn, As, Cd, Pb, Fe, Ni, Cr, Co, and Sr in Haraz River (Iran) bed sediments were measured from several sample locations. In addition, association of studied metals with various sedimentary phases was assessed to determine the proportions of metals in different forms. The intensity of sediment contamination was evaluated using an enrichment factor (EF), geo-accumulation index (I_geo), and a newly developed pollution index (I_poll). Both EF and I_geo formulae compare present concentrations of metals to their background levels in crust and shale, respectively. In a specific area with its own geological background like Haraz River water basin where naturally high concentrations of metals may be found, such a comparison may lead to biased conclusions regarding levels of anthropogenic contamination. Accordingly, chemical partitioning results are substituted for the mean crust and shale levels in the new index (I_poll). The Pearson correlation coefficient between the anthropogenic portion of metallic pollution in Haraz river-bed sediments with I_poll showed much more value in comparison with those of geochemical accumulation index and enrichment factor. The order of metals introduced by anthropogenic activities are as follows: Sr > Pb > Co > Cd > Zn > Cu > Ni > As > Cr > Fe. The results showed relatively higher concentrations of Cd, As, Sr, and Pb in comparison with those of shale. However, based on the chemical partitioning of metals, it is found that Sr, Pb, Co, and Cd are the most mobile metals. In spite of the high As concentrations in sediments, it is not likely that this element is a major hazard for the aquatic environment since it is found mainly in the residual fraction. Also, Fe, Cr, and Ni are present in the greatest percentages in the residual fraction, which implies that these metals are strongly linked to the sediments.     

Trace metal concentrations in tidal flat coastal sediments, Yamaguchi Prefecture, southwest Japan

Geochemical investigations of tidal flat coastal sediments at Ogori, Ozuki, and Kasado in Yamaguchi Bay of southwest Japan were conducted to determine their metal concentrations and to assess contamination levels, compared with sediment quality guidelines (SQG) and several pollutant indicators. Selected major oxides, trace elements, and total sulfur (TS) were determined by X-ray fluorescence. pH values of most samples were alkaline, indicating anoxic conditions. Average abundances of As, Pb, Zn, Cu, Ni, and Cr in Ozuki sediments were 11, 27, 109, 21, 19, and 52 mg/kg, respectively, compared to 9, 29, 80, 16, 18, and 42 mg/kg at Ogori and 12, 27, 151, 34, 30 and 80 mg/kg at Kasado, respectively. Average concentrations of As, Zn, and Cu in all samples and TiO(2), Fe(2)O(3), and P(2)O(5) at Kasado were greater than those of the upper continental crust. Contamination levels were assessed based on SQG, contamination factors (CF), pollution load index (PLI), enrichment factor (EF), and index of geoaccumulation (Igeo). According to the SQG of the US EPA, the sediments were heavily polluted with respect to As, whereas Zn, Cu, Ni, and Cr were classed as moderately polluted. The elevated CF values of As, Pb, and Zn identify moderate to considerable contamination, indicating that these metals are potentially toxic in the study area. Based on PLI and EF, the study sites are moderate to moderately severe polluted with As and Pb, moderately polluted with Zn, and weakly contaminated to noncontaminated with Cu, Ni, and Cr. The highest Igeo values for As, Pb, and Zn in the surface and core sediments reflected the tendency of metal contamination that seems to be related to their fine-grained nature, organic matter-rich sediments, and anthropogenic point sources. Trace metal contents were strongly correlated with Fe(2)O(3) and TiO(2), suggesting that Fe oxyhydroxides and detrital clastic load play a role in controlling abundances in the study area.     

Distribution and accumulation of heavy metals in the sediments of Akkaya Dam,Nigde, Turkey

Twenty-one surface sediment samples were collected from Akkaya Dam. Heavy metal concentrations (Mo, Cu, Pb, Zn, Ni, Co, Mn, Fe, Cr, As, V and Cd), grain size, organic carbon and carbonate contents were studied in order to assess the extent of environmental pollution and to discuss the origin of these contaminants in sediments of dam. The sediments in the study area are mostly very fine sands. However, mud was observed in the northeast of the dam. Sediment pollution assessment was carried out using enrichment factor. The calculation of enrichment factors showed that Mo is depleted by 1.0 whereas Cu, Pb, Zn, Ni, Co, Mn, As, V, Cr and Cd are enriched by 3, 5.4, 7, 2.7, 2.2, 3.4, 42.3, 2.1, 1.8 and 7.2, respectively. Relatively high concentrations heavy metals occurred in north (textile industry area) and east (Karasu River) due to enrichment controlled by anthropogenic wastes. The results of correlation analysis show low–medium positive and negative correlations among metals, grain size, carbonate contents and organic carbon and indicate that heavy metals in sediments of the Akkaya Dam have different anthropogenic sources.     

Metal Fractionation Studies in Surfacial and Core Sediments in the Achankovil River Basin in India

The Fractionation of Fe, Zn, Cu, Pb, Mn and Cd in the sediments of the Achankovil River, Western Ghats, India using a sequential extraction method was carried out to understand the metal availability in the basin for biotic and abiotic activities. Spatial distribution of heavy metals has been studied. Sediment grain size has significant control over the heavy metal distribution. The fluctuations in their concentration partly depend upon the lithology of the river basin and partly the anthropogenic activities. The sediments are dominated by sand and are moderately to strongly positively skewed and are very leptokurtotic in nature. The quartzite and feldspars are abundant minerals along with significant amount of mica with low clay content. The core sediments show increasing trend of heavy metal concentration with depth due to the recent addition of anthropogenic sources and post-diagenic activities. Significant amount of Cd (18%) was found in carbonate fraction, which may pose environmental problems due to its toxic nature. Small concentrations of metals, except Cd and Cu, are in exchangeable fraction, which indicate low bio-availability. Enrichment Factor (EF) for individual metals shows the contribution from terrregious and in part from anthropogenic sources. Selective Sequential Extraction (SSE) study shows the variation in specific metal distribution pattern, their distribution in different phases and their bio-availability. Maximum amount of the metals were bound to the non-residual fractions (mainly Fe-oxides). Overall, bio-availability of these micronutrients from sediments seems to be very less. Non-residual phase is the most important phase for majority of heavy metals studied. Among the non-residual fraction, maximum amount of the heavy metals bound to Fe-oxides. The study high lights the need for in-depth study of heavy metals distribution and fractionation in the smaller river basins to get precise information on the behavior and transport of heavy metals in the fluvial environment and their contribution to the world ocean.     

Evaluation of metal contamination in sediments from north of Morocco: geochemical and statistical approaches

Concentrations of Fe, Mn, Cr, Cu, Ni, Pb, Zn, Cd and Hg were evaluated in surface sediments of two rivers from north of Morocco, known as Souani and Mghogha rivers. Significantly higher concentrations in mg kg^???1 dry weight (dw) of Mn (747.6 vs. 392.9), Cr (86.4 vs. 56.3), Zn (299.5 vs. 138.5) were found in sediment samples from Mghogha when compared with Souani river. Average concentrations of Cd and Hg in several sediment samples from both rivers were above the effect range median that predicts toxic effects to aquatic organisms. The calculation of enrichment factors showed that Mn, Cr, Cu and Ni were depleted, whereas Pb and Hg were enriched. The results of geoaccumulation index revealed that sediments of both rivers were unpolluted with most of the metals and moderately contaminated with Fe and Hg. Some of elevated concentrations of Hg, principally in Mghogha River, were due to anthropogenic sources including the direct discharges of industrial zone.     

Metal pollution records in core sediments of some Red Sea coastal areas, Kingdom of Saudi Arabia

In the last three decades, the industrial and human activities in the coastal area of Saudi Arabia have increased dramatically and resulted in the continuous invasion of different types of pollutants including heavy metals. Seven sediment cores were collected from three major industrialized areas; Jeddah, Rabigh and Yanbu, along the coast of Saudi Arabia to determine the spatial and temporal distribution of metals and to assess the magnitude of pollution and their potential biological effects. Sediments were analyzed for texture, calcium carbonate contents, organic matter and metals (Al, Fe, Mn, Cd, Cr, Cu, Ni, Pb and Zn). Some metals like, Cr, Mn, Ni and Zn, were enriched in the upper 15 cm of core samples (recent deposition of sediments). Cadmium concentrations showed high fluctuations with depth and reverse pattern to that for Al, Fe and Mn which indicated land based sources of this element to the studied areas. Elevated concentrations of lead were recorded in the bottom layers of cores in Jeddah that indicated the most dramatic increase in usage of gasoline in early 1970s. The calculated contamination factors (CF's) were found in the following sequences: Cd > Pb > Ni > Cu > Zn > Cr > Mn for all studied areas. Results of Pollution Load Index (PLI) revealed that Jeddah is the most polluted area, followed by Rabigh while Yanbu is the least contaminated area. Except for Ni, the concentrations of most metals in the majority of sediment samples were believed to be safe for living organisms. As no data were available on the concentration of metals in core sediments in the coastal area of Saudi Arabia, the results of this study would serve as a baseline against which future anthropogenic effects can be assessed.     

Metal speciation in sediment and bioaccumulation in <Emphasis Type="Italic">Meretrix lyrata</Emphasis> in the Tien Estuary in Vietnam

The concentrations of seven toxic metals (cadmium (Cd), nickel (Ni), chromium (Cr), arsenic (As), lead (Pb), copper (Cu), and zinc (Zn)) were determined in sediments and the soft tissues of a bivalve species (Meretrix lyrata) collected from the Tien Estuary in Tien Giang Province, South Vietnam. The total metal concentrations in sediments (mg/kg dry weight) increased as Cd (0.06) < Cu (5.0) < Pb (13.9) < As (16.3) < Ni (24) < Cr (50) < Zn (62). Speciation analysis revealed that these metals existed mainly in the residual fraction (43–94%), followed by the Fe-Mn oxide-bound (5–35%) and organic/sulfide-bound (0.6–9.2%) fractions. The metal concentrations in M. lyrata (mg/kg dry weight) were in the ranges of 1.3–1.9 (Cd), 1.5–2.8 (Ni), 1.8–3.4 (Cr), 11–16 (As), 0.3–0.6 (Pb), 6.9–8.7 (Cu), and 95–128 (Zn), which are safe for human consumption. The order of the mean biota-sediment accumulation factor (BSAF) of the metals in the non-residual fractions of the sediment for M. lyrata was Cd > Cu > As > Zn > Cr > Ni > Pb. The Risk Assessment Codes (RACs) suggest that the highest mobility of Cd (with RAC = 37%) poses greater environmental risk to aquatic biota. Correlation analysis results show that M. lyrata can be used as a biomonitor of Cd and Cu pollution in the exchangeable, acid-soluble, and non-residual sediment fractions.     

Source discrimination of heavy metals in sediment and water of To Lich River in Hanoi City using multivariate statistical approaches

The concentrations of Mn, Fe, Ni, Cr, Cu, Pb, Zn, As, and Cd were determined to evaluate the level of contamination of To Lich River in Hanoi City. All metal concentrations in 0–10-cm water samples, except Mn, were lower than the maximum permitted concentration for irrigation water standard. Meanwhile, concentrations of As, Cd, and Zn in 0–30-cm sediments were likely to have adverse effects on agriculture and aquatic life. Sediment pollution assessment was undertaken using enrichment factor and geoaccumulation index (I _geo). The I _geo results indicated that the sediment was not polluted with Cr, Mn, Fe, and Ni, and the pollution level increased in the order of Cu < Pb < Zn < As < Cd. Meanwhile, significant enrichment was shown for Cd, As, Zn, and Pb. Cluster and principal component analyses suggest that As and Mn in sediment were derived from both lithogenic and anthropogenic sources, while Cu, Pb, Zn, Cr, Cd, and Ni originated from anthropogenic sources such as vehicular fumes for Pb and metallic discharge from industrial sources and fertilizer application for other metals.     

Heavy metal concentrations in the surface marine sediments of Sfax Coast, Tunisia

Sixty-seven surface marine sediment samples in the <63 ?? m fraction collected from the coast of Sfax (Tunisia) were analyzed by inductively coupled plasma-atomic emission spectrometry for seven heavy metals (Pb, Ni, Cu, Cr, Zn, Cd, and Fe). Metal concentrations were compared with natural values, marine sediment quality standards, and also with other results concerning sediments from several Mediterranean coasts. The study of their spatial distributions refined by complementary approaches including principal component analysis, enrichment factors, and geoaccumulation index showed a significant impact of multiple anthropogenic sources. These included industrial sources and municipal discharges of the urban Sfax and also non-controlled discharges in rural zones close to the coastline. Moderate pollution of sediments, especially by Pb, Zn, and Ni, was shown to exist in localized sites. Besides, it was shown that other sites, slightly to highly enriched in terms of Cu, Cr, and Cd, are characterized by a quality of sediments varying from unpolluted to moderately polluted.     

Assessment of heavy metal concentration in the Khoshk River water and sediment, Shiraz, Southwest Iran

Heavy metal contents and contamination characteristics of the water and sediment of the Khoshk River, Shiraz, Southwest Iran were investigated. The abundance of heavy metals decreases as Zn > Mn > Cr > Ni >Pb > Cu > Cd in water samples and Mn > Cr > Pb > Ni > Zn > Cu > Cd in sediments, respectively. Based on the enrichment factor and geoaccumulation index values, sediments were loaded with Cr, Zn, Pb, Cu, and Cd. Pearson correlation matrix as well as cluster and principal components analyses and analysis of variance were implemented on data from sampling sites. Based on the locations of sampling sites in clusters and variable concentrations at these stations, it was concluded that municipal, industrial, and domestic discharges in the Shiraz urban area strongly affected heavy metals concentrations in the Khoshk River water and sediment. Results obtained from principal components analysis of sediment samples showed that the high concentration of Ni was mainly from natural origin, related to the composition of parent rocks, while the elevated values of Cr, Zn, Pb, Cd, and Cu were due to anthropogenic activities.     

Speciation of Trace Metals in Coastal Sediments of El-Mex Bay South Mediterranean Sea–West of Alexandria (Egypt)

Sediments of El-Mex Bay estuary on the southern Mediterranean Sea have been analyzed for trace metals after sediment fractionation by sequential leaching. A sequential extraction procedure was applied to identify forms of Mn, Cu, Cd, Cr, Zn and Fe. The five steps of the sequential extraction procedure partitioned metals into: CH₃COONH₄ extractable (F1); NaOAC carbonate extractable (F2); NH₂OH.HCl/CH₃COOH reducible extractable (F3); H₂O₂–HNO₃ organic extractable (F4) and NHO₃/HClO₄/HF acid soluble residue (F5). Extracted concentrations of trace metals analyzed after all five steps, were found to be (μg/g) for Mn: 1930.2, Cu: 165.3, Cd: 60.9, Cr: 386.3, Zn: 2351.3 and Fe: 10895. Most of elements were found in reducible fraction except Fe found in acid soluble residue, characterizing stable compounds in sediments. Labile (non-residual) fractions of trace elements (sum of the first four fractions) were analyzed because they are more bioavailable than the residual amount. Correlation analysis was used to understand and visualize the associations between the labile fractions of trace metals and certain forms, since Fe-and Mn-oxides play an important role in trace metals sorption within aquatic systems, especially within El-Mex Bay sediments that characterized by varying metal bioavailability.     

Impact of anthropogenic input on physicochemical parameters and trace metals in marine surface sediments of Bay of Bengal off Chennai, India

The study of heavy metal distribution in coastal surface sediments is an important component in understanding the exogenic cycling as well as in assessing the effect of anthropogenic influences on the marine ecosystem. In this study, surface sediment samples were collected from five different traverses along the innershelf of Bay of Bengal, off Chennai, India during pre- and post-monsoon seasons. The results of Spearmen correlation matrix, factor and cluster analysis, enrichment and contamination factor analysis, and geoaccumulation index of the heavy metals analyzed in the collected surface sediment were discussed. The level of both enrichment and contamination factor are shown in following order Cd > Cu > Cr > Ni > Pb > Co > Zn > Mn > Fe > Hg. The geoaccumulation index suggests that Cd and Cu are strongly to extremely pollute the sediments in both seasons. The results strongly indict anthropogenic sources for moderate input of Cd and Cu in to the innershelf of Chennai coast.     

Polycyclic aromatic hydrocarbons and trace metal contamination of coastal sediment and biota from Togo

The state of contamination of tropical environments, particularly in Africa, remains a relatively under explored subject. Here, we determined polycyclic aromatic hydrocarbon (PAH) and trace metal concentrations in coastal sediment and biota samples (fish and mussels) from Togo (West Africa). In the sediments, the ∑21 PAH concentrations ranged from <4 ng g(-1) to 257 ng g(-1), averaging 92 ng g(-1). Concentration ratios of low molecular weight PAHs (2-3 rings) versus high molecular weight PAHs (≥4 rings) were always lower than 1 (ranging from 0.08 to 0.46) indicating that high molecular weight PAHs were dominant in all sediment samples, and that PAHs originated mainly from anthropogenic combustion activities. The sediments were also analyzed for major elements and a total of 15 trace metals, which were found in elevated concentrations. The calculated enrichment factor (EF) values relative to the Earth's crust show that the contamination is extremely severe for Cd (EF = 191), severe for Cr (EF = 18) and U (EF = 17.8), moderately severe for Zr (EF = 8.8), for Ni (EF = 6.8), Sr (EF = 5.9) and Ba (EF = 5.4), and moderate for V (EF = 3.6) and Zn (EF = 3.4). Sediments sampled in areas affected by the dumping of phosphorite mine tailings showed particularly high concentrations of trace metals. Overall, concentrations of both PAHs and trace metals in sediment tend to increase from the coastline to the open sea (2 km offshore). This is attributable to the increasingly finer texture of coastal sediment found offshore, which has a terrigenous origin and appears loaded with various contaminants through adsorption processes. Such high loads of trace metals were also found in the biota (fish and mussels). The ratio of measured trace metal concentrations in biota to threshold limits set by the World Health Organization herein defined as relative health factor (RHF) was high. Average RHF values in fish were highest for Se (470), As (250), Ag (97), Ni (78), Mn (63), Fe (53), Pb (36), Cd (10), and Cr (7) while lowest for Cu (0.08) and Zn (0.03). Cd and Al did not bioaccumulate in the analyzed fish species. In mussels, the RHF values were highest for Fe (9,108), As (295), Pb (276), Se (273), Mn (186), Ni (71), Ag (70), Cd (14), and Cu (4).