An assessment of dioxin contamination from the intermittent operation of a municipal waste incinerator in Japan and associated remediation

Significant dioxin (polychlorinated dibenzo-para-dioxins (PCDDs)/polychlorinated dibenzo-furans (PCDFs)) pollution from a municipal solid waste incinerator was discovered in 1997 in Osaka prefecture/Japan. The cause and mechanism of pollution was identified by a detailed assessment of the environment and incinerator plant. The primary sources of PCDD/PCDF pollution were high dioxin releases from an intermittently operated waste incinerator with PCDD/PCDF emissions of 150 ng-TEQ/Nm³. PCDD/PCDF also accumulated in the wet scrubber system (3,000 μg TEQ/L) by adsorption and water recirculation in the incinerator. Scrubber water was air-cooled with a cooling tower located on the roof of the incinerator. High concentrations of dioxins in the cooling water were released as aerosols into the surrounding and caused heavy soil pollution in the area near the plant. These emissions were considered as the major contamination pathway from the plant. Decontamination and soil remediation in and around the incinerator plant were conducted using a variety of destruction technologies (including incineration, photochemical degradation and GeoMelt technology). Although the soil remediation process was successfully finished in December 2006 about 3 % of the waste still remains. The case demonstrates that releases from incinerators which do not use best available technology or which are not operated according to best environmental practices can contaminate their operators and surrounding land. This significant pollution had a large impact on the Japanese government’s approach toward controlling dioxin pollution. Since this incident, a ministerial conference on dioxins has successfully strengthened control measures.     

香港城市固体废物系统管理

本文以大量翔实的数据介绍了香港对城市固体废物的系统管理,即分类、收集、监测分析、处理和预测评价。香港环保署自８０ 年代开始对城市固体废物进行监测并系统管理。在全港设置了３ 个大型策略性填埋场、５ 个垃圾转运站、１ 个垃圾焚烧厂（１９９７ 年５ 月关闭） 和１个化学废物处理中心。目前,香港政府正筹建一个新的、技术先进的焚烧厂。从１９８６ ～１９９７年,这些废物处理设施处理全港废物量为８９６０ ～２４３００ｔ／ｄ,其中城市固体废物比例每年不等,最低为３０ ．７ ％ ,最高为６５ ．５ ％ 。１９９７ 年,这些废物中可循环再利用物接近５０ ％ ,出口部分达１２０ 多万吨,回收资金２０ 多亿港元。根据历年来城市固体废物量与本地生产总值（ＧＤＰ）和人口数量的密切相关性,预测出２０１１ 年城市固体废物人均产率为２ ．５６ｋｇ／ 人·ｄ, 城市固体废物量为１２８１０ ｔ／ｄ。城市固体废物系统管理紧迫而重要,香港的经验是值得我们借鉴的。     

Comprehensive evaluation of municipal garbage disposal in Changchun City by the strategic environmental assessment

Purpose

The environmental issues caused by the municipal solid waste disposal are becoming a worldwide concern.

Methods

We studied the situations both domestically and abroad by the strategic environmental assessment (SEA) approach and also conducted comprehensive evaluations of garbage disposal in Changchun City.

Results

On the basis of this study, we found that SEA is of great importance in the municipal solid waste disposal. Moreover, with the rapid socioeconomic development of Changchun City, municipal solid waste production increases on an annual basis, and thus, good waste management planning is of great significance.

Conclusions

Considering the situation of the economic development of Changchun City, garbage disposal was handled mainly in the major sanitary landfills with appropriate use of incineration technology. This plan is environmentally friendly at a relatively high degree and has met the requirements of minimum investment. It also takes into account the requirements of the development of incineration technology. Regarding environmental pollution in terms of groundwater pollution and atmospheric pollution, this plan is a feasible one by meeting various requirements with low environmental impact among the three plans discussed in this study.     

PCDD/F enviromental impact from municipal solid waste bio-drying plant

The present work indentifies some environmental and health impacts of a municipal solid waste bio-drying plant taking into account the PCDD/F release into the atmosphere, its concentration at ground level and its deposition. Four scenarios are presented for the process air treatment and management: biofilter or regenerative thermal oxidation treatment, at two different heights. A Gaussian dispersion model, AERMOD, was used in order to model the dispersion and deposition of the PCDD/F emissions into the atmosphere. Considerations on health risk, from different exposure pathways are presented using an original approach. The case of biofilter at ground level resulted the most critical, depending on the low dispersion of the pollutants. Suggestions on technical solutions for the optimization of the impact are presented.     

A comparison between two full-scale MBR and CAS municipal wastewater treatment plants: techno-economic-environmental assessment

A holistic assessment procedure has been used in this study for comparing conventional activated sludge (CAS) and membrane bioreactor (MBR) processes for the treatment of municipal wastewater. Technical, social, administrative, economic and environmental impacts have been evaluated based on 1 year of operational data from three full-scale lines (one MBR and two CAS) working in parallel in a large municipal treatment plant. The comparative assessment evidences a slight advantage of the conventional process in the studied case, essentially due to lower costs, complexity and energy consumption. On the other hand, the MBR technology has a better social acceptance and similar overall environmental footprint. Although these results are influenced by site-specific parameters and cannot be generalized, the assessment procedure allowed identifying the most important factors affecting the final scores for each technology and the main differences between the compared technologies. Local conditions can affect the relative importance of the assessed impacts, and the use of weighting factors is proposed for better tailoring the comparative assessment to the local needs and circumstances. A sensitivity analysis on the weighted final scores demonstrated how local factors are very important and must be carefully evaluated in the decision making process.     

Contribution of stack gases and solid process wastes to the organic pollutant output of thermal waste treatment plants

Within the scope of fundamental investigations as well as individual research projects (W. Knorr, B. Hentschel, C. Marb. S. Sch?del, M. Swerev, O. Vierle, J.-P. Lay, 1999. Rückst?nde aus der Müllverbrennung-Chancen für eine stoffliche Verwertung von Aschen und Schlacken. Initiativen zum Umweltschutz, 13 ed., Deutsche Bundesstiftung Ulmwelt, Erich Schmidt, Berlin), the Bavarian State Office for Environmental Protection performs emission measurements at thermal waste treatment plants to optimize operation, to accompany and support development of new technologies, and to study the effect of this kind of waste treatment technology on the environment. Based on recent studies (October 1995-July 1999) at six municipal solid waste incinerators (MSWI) in Bavaria all emission streams (solid and gas) are characterized with respect to organic pollutant contents and compared to the emissions of waste pyrolysis. The significant ranges of pollutant concentration as well as the specific congener patterns observed are similar for all MSWI, regardless of differences in technical design and waste input, but differ markedly from those of the pyrolysis products. The overall approach, including the sampling of all output streams and the determination of mass streams and volume flow rates, allows the calculation of the total output of different organic pollutants for waste incineration plants aand to estimate the relative contribution of each of the emission streams to the total pollutant load. Removal efficiencies are also calculated for the air pollution control (APC) systems of the different MSWI plants.     

生活垃圾高温空气气化处理的低污染特性分析

本文介绍了高温空气气化城市生活垃圾的工作原理及过程 ,分析了城市生活垃圾高温气化反应机理。通过对高温空气 /蒸汽发生器、高温气化炉及湿式除尘器等关键部件的分析发现 ,采用高温空气气化系统可实现城市生活垃圾低污染处理     

PCDD/Fs in ambient air in north-east Italy: The role of a MSWI inside an industrial area

The stack gases of a municipal solid waste incinerator (MSWI), and ambient air were sampled in four locations around the plant for the analysis of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/Fs). The sampling area was close to an industrial area near Trieste, in north-east Italy. The purpose of the study was to estimate the impact of the MSWI emissions and to distinguish the contribution of these emissions from other potential emission sources in the industrial area.PCDD/F atmospheric concentrations were similar to those generally detected in urban–rural areas with one location about 2–3 times more contaminated than the others. Since the most contaminated location was inside the industrial area but upwind of the MSWI, principal component analysis (PCA) was used to establish whether other sources were the cause. This analysis clearly showed that a local steel plant’s emission was the main source of PCDDs/Fs in ambient air. This study highlights the usefulness of multivariate data analysis such as PCA to identify, among different potential emission sources, the one really responsible for the contamination.     

Greenhouse gas dynamics of municipal solid waste alternatives.

Previous greenhouse gas studies comparing landfilling with combustion of municipal solid waste (MSW) are limited to examinations of the emissions weighted by their relative radiative activity. This paper adds another dimension by analyzing the atmospheric response to these emissions. The heart of the analysis is a time-dependent model using a perturbation analysis of the IS92a results of the Intergovernmental Panel on Climate Change (IPCC). Using as inputs the emissions from the two technologies, the model calculates atmospheric concentration histories. Scenarios for a landfill and a combustor envision each accepting 1000 Mg refuse/day for a 30-year operating period followed by a 70-year postclosure period. The baseline scenario examines the basic greenhouse impact of each technology. The other scenario adds active gas collection at the landfill and energy offset credits for avoided power plant carbon emissions. For both scenarios, CH4 and trace gases from the landfill persist in the atmosphere, and they are relatively potent at forcing IR heating. The combination of these features place the landfill much higher than previously expected on the greenhouse impact scale. For the baseline scenario, the time-integrated radiative forcing from landfilling is 115 times that of combustion, and this ratio is 45 for the second scenario.     

Compatibility analysis of material and energy recovery in a regional solid waste management system

The rising prices of raw materials and concerns about energy conservation have resulted in an increasing interest in the simultaneous recovery of materials and energy from waste streams. Compatibility exists for several economic, environmental, and managerial reasons. Installing an on-site or off-site presorting facility before an incinerator could be a feasible alternative to achieve both goals if household recycling programs cannot succeed in local communities. However, the regional impacts of presorting solid waste on a waste-to-energy facility remain unclear because of the inherent complexity of solid waste compositions and properties over different areas. This paper applies a system-based approach to assess the impact of installing a refuse-derived fuel (RDF) process before an incinerator. Such an RDF process, consisting of standard unit operations of shredding, magnetic separation, trommel screening, and air classification, might be useful for integrating the recycling and presorting efforts for a large-scale municipal incinerator from a regional sense. An optimization modeling analysis is performed to characterize such integration potential so that the optimal size of the RDF process and associated shipping patterns for flow control can be foreseen. It aims at exploring how the waste inflows with different rates of generation, physical and chemical compositions, and heating values collected from differing administrative districts can be processed by either a centralized presorting facility or an incinerator to meet both the energy recovery and throughput requirements. A case study conducted in Taipei County, which is one of the most densely populated metropolitan areas in Taiwan, further confirms the application potential of such a cost-benefit analysis.     

PCDD/F mass balance in the flue gas cleaning units of a MSW incineration plant

With the main purpose of evaluating PCDD/F presence and the corresponding mass balance over the emissions control system, an extensive study was performed on a municipal solid waste full scale incinerator equipped with a best available technology flue gas treatment line. Present paper reports the main results obtained, with particular reference to the PCDD/F concentration profiles and mass balances derived for every process unit of the flue gas control system. Total release evaluated for the plant is also outlined compared with data on PCDD/F content of raw waste and with reference values included in most recent guidelines.     

Greenhouse Gas Dynamics of Municipal Solid Waste Alternatives

ABSTRACT

Previous greenhouse gas studies comparing landfilling with combustion of municipal solid waste (MSW) are limited to examinations of the emissions weighted by their relative radiative activity. This paper adds another dimension by analyzing the atmospheric response to these emissions. The heart of the analysis is a time-dependent model using a perturbation analysis of the IS92a results of the Intergovernmental Panel on Climate Change (IPCC). Using as inputs the emissions from the two technologies, the model calculates atmospheric concentration histories. Scenarios for a landfill and a combustor envision each accepting 1000 Mg refuse/day for a 30-year operating period followed by a 70-year postclosure period. The baseline scenario examines the basic greenhouse impact of each technology. The other scenario adds active gas collection at the landfill and energy offset credits for avoided power plant carbon emissions. For both scenarios, CH₄ and trace gases from the landfill persist in the atmosphere, and they are relatively potent at forcing IR heating. The combination of these features place the landfill much higher than previously expected on the greenhouse impact scale. For the baseline scenario, the time-integrated radiative forcing from landfilling is 115 times that of combustion, and this ratio is 45 for the second scenario.     

广州李坑生活垃圾填埋场周围植被现状调查与影响分析

为对垃圾填埋场封场后如何进行生态恢复研究提供基础资料，对超负荷运转中的广州市李坑生活垃圾填埋场周围的植被现状进行了调查，测算了物种量、覆盖度、污染状况等。同时运用植被覆盖度、结构、物种量和相对物种量等级评价以及对Zn、Cd等6种污染物的质量指数进行了评价。结果表明，所调查填埋场场区及灌区内有轻度污染，而场外与灌区外则相对较轻或无污染。     

Landfill leachates and wastewater of maritime origin as possible sources of endocrine disruptors in municipal wastewater

Environmental Science and Pollution Research - In this study, wastewater from municipal services, such as a port wastewater reception facility (PRF-WW) and a municipal solid waste plant (MSWP), was...     

Anaerobic codigestion of municipal, farm, and industrial organic wastes: a survey of recent literature.

Codigestion of organic wastes is a technology that is increasingly being applied for simultaneous treatment of several solid and liquid organic wastes. The main advantages of this technology are improved methane yield because of the supply of additional nutrients from the codigestates and more efficient use of equipment and cost-sharing by processing multiple waste streams in a single facility. Many municipal wastewater treatment plants (WWTPs) in industrialized countries currently process wastewater sludge in large digesters. Codigestion of organic wastes with municipal wastewater sludge can increase digester gas production and provide savings in the overall energy costs of plant operations. Methane recovery also helps to reduce the emission of greenhouse gases to the atmosphere. The goal of this literature survey was to summarize the research conducted in the last four years on anaerobic codigestion to identify applications of codigestion at WWTPs. Because the solids content in municipal wastewater sludge is low, this survey only focuses on codigestion processes operated at relative low solids content (slurry mode). Semi-solid or solid codigestion processes were not included. Municipal wastewater sludge, the organic fraction of municipal solid waste, and cattle manure (CAM) are the main wastes most often used in codigestion processes. Wastes that are codigested with these main wastes are wood wastes, industrial organic wastes, and farm wastes. These are referred to in this survey as codigestates. The literature provides many laboratory studies (batch assays and bench-scale digesters) that assess the digestibility of codigestates and evaluate the performance and monitoring of codigestion, inhibition of digestion by codigestates, the design of the process (e.g., single-stage or two-stage processes), and the operation temperature (e.g., mesophilic or thermophilic). Only a few reports on pilot- and full-scale studies were found. These evaluate general process performance and pretreatment of codigestates, energy production, and treatment costs.     

Environmental release and mass flux partitioning of PCDD/Fs during normal and transient operation of full scale waste to energy plants

The paper reports on global release and mass partitioning in the flux of residues of PCDD/Fs, evaluated with dedicated field campaigns at a municipal solid waste incineration plant during normal and transient operation. Results are compared with those obtained in other installations equipped with furnaces, energy recovery options and flue gas treatment technologies representative of most of the European incineration plants currently in operation. Levels of the pollutants of interest were determined in all the solid, liquid and gaseous residues produced by every single facility, and the results analysed in terms of the effects arising from the fed waste and the configuration of the plant. PCDD/Fs total release between 1.5 and 45 microg I-TEQ per ton of burned waste was evaluated, with lower values resulting from the adoption of catalytic conversion process for flue gas treatment. Most of the mass flux emitted is associated with solid residues deriving from activated carbon PCCD/F dry removal options, with significant contributions also from fly ash produced by particulate removal devices located immediately downstream the boiler and from scrubber blowdowns treatment sludge. During transient operating conditions the dioxin total release may increase by 50% with comparison to steady-state functioning.     

易腐性有机垃圾的产生与处理技术途径比较

我国城市垃圾以易腐性有机垃圾为主.目前有关管理部门提出逐步减少进入填埋场的易腐性有机垃圾量,因此,必须寻求其他填埋替代技术消纳易腐性有机垃圾物流.本文对几种常规技术方案进行了比较.认为应该根据非餐饮业和餐饮业易腐性有机垃圾各自的产生源特点,采取不同的处理方案;但目前这些替代技术用于处理易腐垃圾时均存在各自的缺陷.本文据此提出了相应的技术完善要求和配套管理政策建议.     

回转窑式纯氧熔融焚烧垃圾技术研究

生活垃圾安全无害化处理是目前迫切需要解决的问题,直接气化熔融焚烧垃圾技术以降低二恶英排放方面巨大优势得到广泛关注,在此基础上提出纯氧熔融焚烧垃圾技术,几乎可以实现所有二次污染物近零排放。以350 t/d回转窑垃圾焚烧炉为例,对纯氧代替空气应用在回转窑上熔融焚烧垃圾系统进行了详细热力计算及分析。结果表明,纯氧熔融焚烧垃圾系统的锅炉效率可达90.56%,回转窑熔融焚烧系统还可以在垃圾焚烧后灰渣达到熔融温度的条件下,保持该系统热量平衡,稳定燃烧。并参考回转窑设计标准对该纯氧熔融焚烧城市生活垃圾的回转窑参数进行确定。     

A factor analysis of residents’ performance in municipal solid waste source-separated collection: A case study of pilot cities in China

To explore the potential effectiveness of a localized waste recycling system in Chinese cities, several rounds of a municipal solid waste source-separated collection (MSWSC) program were implemented throughout China from 2000 to 2017. In our study, to evaluate the achievements of the MSWSC program, a structured questionnaire survey and face-to-face interviews were conducted in eight representative cities from the MSWSC pilot cities. Influencing factors were examined via a Hierarchical Linear Model (HLM) on both the individual level and the city level. The differences in MSWSC performance among the eight research cities were investigated through a comparative analysis. The results suggested that gender, age, knowledge of MSWSC, satisfaction with sanitation and satisfaction with publicity had significant impacts on MSWSC, and we further found that the city-level factors influenced the relationship between MSWSC performance and the individual-level variables. Differences among the eight research sites indicated that Nanjing and Hangzhou exhibited relatively high achievements in the implementation of MSWSC program, while Yichun and Guiyang showed poor performance. The experiences of these advanced pilot cities suggest that specific containers for designated waste types, widespread public education, and sufficient MSWSC incentives must be provided and publicized to promote municipal solid waste recycling behaviors. Given the unique status of municipal solid waste management in China and its regional heterogeneity, the MSWSC system should be further discussed with regard to local conditions in a wider range of city settings.

Implications: This study attempts to discuss the factors affecting performance on municipal solid waste source-separated collection (MSWSC) by considering the nested data of two levels of individual and city from a structured questionnaire survey. Therefore, a Hierarchical Linear Model is established which can analyze the intra-group and inter-group effects of two-level variables. The proposed method can be expanded to other cities to determine the main factors affecting MSWSC or to evaluate the residents’ performance on MSWSC.     

Modelling of PCDD/F release from MSW bio-drying

In the present work, an experimentation was carried out to study the behaviour of PCDD/F during the process of municipal solid waste (MSW) bio-drying. This process belongs to the biological mechanical treatment (BMT) options and is aimed to the dewatering of MSW thanks to the biological exothermal reactions (thermal drying, on the contrary, needs an external heat source as methane). The result is a decrease of waste weight and an increase of lower heating value (as the energy content refers to a lower amount of waste). Of course, the overall energy availability does not increase, but the characteristics of bio-drying are interesting as a way for refuse derived fuel generation: glass, metals and inert removals are easier after bio-drying. The literature of the sector shows only few data on PCDD/F emission to air from BMT. Anyway, in the present work an original theory has been put forward in order to explain the enrichment of PCDD/F in the air exiting the biological processes. The role of the initial PCDD/F concentration in the ambient air entering the plant is obviously taken into account. The results of the developed experimentation and the following elaborations point out that PCDD/F could be freed from the volatile solids consumed during the process. The different amount of PCDD/F in the waste and the different consumption of volatile solids depending on the biological process can explain the different PCDD/F emission factors available in the literature.