Medical waste management in Korea

The management of medical waste is of great importance due to its potential environmental hazards and public health risks. In the past medical waste was often mixed with municipal solid waste and disposed of in residential waste landfills or improper treatment facilities (e.g. inadequately controlled incinerators) in Korea. In recent years, many efforts have been made by environmental regulatory agencies and waste generators to better manage the waste from healthcare facilities. This paper presents an overview of the current management practices of medical waste in Korea. Information regarding generation, composition, segregation, transportation, and disposal of medical wastes is provided and discussed. Medical waste incineration is identified as the most preferred disposal method and will be the only available treatment option in late 2005. Faced with increased regulations over toxic air emissions (e.g. dioxins and furans), all existing small incineration facilities that do not have air pollution control devices will cease operation in the next few years. Large-scale medical waste incinerators would be responsible for the treatment of medical waste generated by most healthcare facilities in Korea. It is important to point out that there is a great potential to emit air toxic pollutants from such incinerators if improperly operated and managed, because medical waste typically contains a variety of plastic materials such as polyvinyl chloride (PVC). Waste minimization and recycling, control of toxic air emissions at medical waste incinerators, and alternative treatment methods to incineration are regarded to be the major challenges in the future.     

Flexible interval mixed-integer bi-infinite programming for environmental systems management under uncertainty

A number of inexact programming methods have been developed for municipal solid waste management under uncertainty. However, most of them do not allow the parameters in the objective and constraints of a programming problem to be functional intervals (i.e., the lower and upper bounds of the intervals are functions of impact factors). In this study, a flexible interval mixed-integer bi-infinite programming (FIMIBIP) method is developed in response to the above concern. A case study is also conducted; the solutions are then compared with those obtained from interval mixed-integer bi-infinite programming (IMIBIP) and fuzzy interval mixed-integer programming (FIMIP) methods. It is indicated that the solutions through FIMIBIP can provide decision support for cost-effectively diverting municipal solid waste, and for sizing, timing and siting the facilities’ expansion during the entire planning horizon. These schemes are more flexible than those identified through IMIBIP since the tolerance intervals are introduced to measure the level of constraints satisfaction. The FIMIBIP schemes may also be robust since the solutions are “globally-optimal” under all scenarios caused by the fluctuation of gas/energy prices, while the conventional ones are merely “locally-optimal” under a certain scenario.     

国内外近地表处置场处置技术研究

近年来低、中水平放射性废物由于其数量大,种类多等特点得到了国际上越来越多的关注。近地表处置是这类放射性废物的主要处置技术。本文介绍了国外几个国家的近地表处置场运行情况以及管理经验。陈述了我国西北和北龙两个处置场设计及运行情况,对国内外低中放处置场的处置技术进行比较,借鉴国外近地表处置场的先进经验,提出我国近地表处置场建设的相关建议,为我国新建近地表处置场建设提供参考。     

Determinants of privatized solid waste management service provision in Lagos

The growing popularity of privatized solid waste management service in least developed countries warrants an exploration of factors that are likely to impact on its sustainability. This study takes integrated solid waste management approach by analyzing relevant issues on both market sides. We use a three step theme development sequence to analyze the data obtained on service providers through library research, observations and interviews. This was followed by an opinion survey on the demand side to elicit households’ support for service improvement. Findings show that source-separation issues, government enforcement, market segmentation, financial issues and waste disposal issues are key factors influencing improved service provision. Meanwhile, on the demand side, we found that households are willing to support proposed regulatory improvement in service provision. Thus, we suggest industrial stakeholders to consider the aforementioned supply side issues in designing future service improvements that will take advantage of existing demand side feasibility.     

Waste Management in Guangdong Cities: The Waste Management Literacy and Waste Reduction Preferences of Domestic Waste Generators

A questionnaire survey was conducted in 2002 on 1365 households in two prefectural-level cities in the Pearl River Delta, Jiangmen and Zhongshan. Three groups of issues are covered in this paper: 1) waste management literacy, concerns, and public participation; 2) waste recycling practices and the potential for waste avoidance; and 3) public environmental literacy. This study confirms findings from previous surveys and provides new information on important issues such as imposing monetary charges on waste and environmental activities, littering, source separation programs (SSPs), and public participation and expectations in local waste management. Saving up recyclable materials for redemption in waste depots is commonly practiced in mainland China regardless of the level of development of a city, although at the household level, high-income families tend to place less value on the revenues to be gained from redemption than lower income groups do. Data from the previous and the present studies indicate that such voluntary but largely economically driven waste recovery behavior diverts at least 10% of the household waste from the waste stream. Although uncompensated SSP is less appealing in the two cities than compensated SSP, it was found that when the median per capita income of a city reaches RMB2000 per month, a high participation rate for uncompensated waste recovery is more likely to occur. Education and income levels are the chief factors affecting littering behavior and the potential for waste avoidance. Contrary to general belief, the local Chinese community is active in microwaste management. The concern, however, is over the inability of the grassroots bureaucracy to deal with rising expectations for waste collection services and neighborhood cleanliness.     

Indigenous Waste Management Practices among the Ngwa of Southeastern Nigeria: Some Lessons and Policy Implications

Despite large investments that have gone into meeting the challenges of effective waste management in urban Nigeria, there is little evidence that such efforts are having their expected impacts. Consequently, much attention has been drawn to the need to evolve more sustainable waste management strategies. Drawing on data from in-depth interviews among the Ngwa of southeastern Nigeria, some useful indigenous solid and liquid waste management techniques, in the search for solutions to the current waste management crisis in urban Nigeria, have become evident. These indigenous techniques and practices, which include ingenious and careful waste segregation and sorting, selective burning and burying, composting and conversion, etc., offer scope for meeting the challenges and addressing the limitations of current waste management in urban areas, especially if they are supported by appropriate inputs from modern technology.     

Comparative risk analysis for metropolitan solid waste management systems

Conventional solid waste management planning usually focuses on economic optimization, in which the related environmental impacts or risks are rarely considered. The purpose of this paper is to illustrate the methodology of how optimization concepts and techniques can be applied to structure and solve risk management problems such that the impacts of air pollution, leachate, traffic congestion, and noise increments can be regulated in the long-term planning of metropolitan solid waste management systems. Management alternatives are sequentially evaluated by adding several environmental risk control constraints stepwise in an attempt to improve the management strategies and reduce the risk impacts in the long run. Statistics associated with those risk control mechanisms are presented as well. Siting, routing, and financial decision making in such solid waste management systems can also be achieved with respect to various resource limitations and disposal requirements.     

E‐waste in the world today: An overview of problems and a proposal for improvement in Brazil

Environmental issues have been at the center of society's concerns for a long time. Recently, this kind of concern is growing even more due to the damage caused to the environment by electrical and electronic product waste. Based on this same concern, this work aimed to analyze, through a literature review, the production and treatment of electronic waste in today's world, with an emphasis on Brazil and China. The articles reviewed point to an increase in the production of this type of waste, in both Brazil and China, and reveal that the current processes of treatment of electronic waste mostly aim to obtain profit through the recovery of precious metals such as copper. This paper concluded that although Brazil is one of the major producers of e‐waste, more than 90% of its e‐waste has not had a proper final destination. This deficiency in e‐waste treatment in Brazil is mainly due to financial factors and the lack of a robust educational policy focused on the environment. Thus, this work suggests the implementation of an effective educational policy aimed at environmental conservation, as well as investments in research on recycling methods in Brazil, especially on the use of e‐waste as an aggregate in the manufacture of concrete.     

A life cycle based multi-objective optimization model for the management of computer waste

The accelerating pace of waste generation from used electrical and electronic equipment is of growing global concern. Within this waste stream, computer hardware is quite significant in terms of both volume and risk to the environment because of the hazardous materials within it. The waste management hierarchy of prevention, reuse, recycle, treatment and disposal in landfill is accepted as a universal guideline for waste management. The contemporary concept of integrated solid waste management is very complex comprising of not only the environmental aspects or the technical aspects of the waste management hierarchy, but also incorporating economic, institutional, perceived risk and social issues in the context of complete life cycle of waste. Moreover, when to shift from one stage of hierarchy to another, is an involved decision warranting inclusion of several case specific issues. This paper presents a life cycle based multi-objective model that can help decision makers in integrated waste management. The proposed model has been applied to a case study of computer waste scenario in Delhi, India, which apart from having computer waste from its native population receives large quantities of imported second hand computers. The model has been used to evaluate management cost and reuse time span or life cycle of various streams of computer waste for different objectives of economy, perceived risk and environmental impact. The model results for different scenarios of waste generation have been analyzed to understand the tradeoffs between cost, perceived risk and environmental impact. The optimum life cycle of a computer desktop was observed to be shorter by 25% while optimizing cost than while optimizing impact to the environment or risk perceived by public. Proposed integrated approach can be useful for determining the optimum life cycle of computer waste, as well as optimum configuration of waste management facilities, for urban centers where computer waste related issues are of growing concern.     

Overview of non-hazardous solid waste in the small island state of Mauritius

In Mauritius, solid waste disposal has been a cause for concern since the 1980s. Currently, there is no segregation of waste and some 1200 tonnes of solid waste are generated daily by the 1.24 million inhabitants of the island. As processes such as recycling and composting are still in their infancy stage, most of the waste generated have to be disposed of at the sole landfill. The solid waste management practices of 1980s and early 1990s are no longer compatible with the changing composition and quantity of wastes now generated. As a result, there is an urgency to review the whole waste management system and come forward with sustainable solutions.This paper presents an overview of the disposal of non-hazardous solid waste in Mauritius and provides recommendations for improving the current disposal system.     

进口废塑料环境保护管理研究

随着塑料资源的大量消耗,废塑料的利用引起了社会的高度重视。工艺简单,投入成本少,入行门槛低导致部分废塑料加工利用企业技术水平低、管理模式差、环境污染重。为规范进口废塑料行业,通过调研统计、实验分析、咨询论证和研究了进口废塑料环境保护管理规定,对进口废塑料企业的规模、设备、人员和管理等方面提出了要求,为进一步规范提升进口废塑料行业提供技术支撑。     

“三废”资源化利用探讨

针对我国环境污染严重,资源、能源利用率低的现状,胜利油田积极开展“三废”资源化工作。通过对废水、固体废物、工业废气资源化现状的分析,科学地论证了“三废”资源化具有投资少,处理工艺简单易行,处理成本低,管理难度小等优点。找出存在的主要问题,并提出下一步工作目标。     

Environmental Management of Quarries as Waste Disposal Facilities

Problems associated with the disposal of municipal solid waste have become a source of public concern worldwide as awareness of potential adverse environmental impacts and health threats from solid waste has increased. Communities are concerned about the generation and management of solid waste to the extent of refusing to allow new disposal facilities near their homes, often after witnessing the legacy of existing facilities. Under these conditions, the development of national policies for the management of solid waste becomes highly political, all while requiring appropriate technical solutions that ensure environmental protection and proper management plans that support an acceptable solution for the disposal of municipal solid waste. In some locations, the conversion of old quarries into well-engineered and controlled landfills appears as a promising solution to a continuously increasing problem, at least for many decades to come. This paper describes the environmental impacts associated with solid waste disposal in a converted quarry site and the mitigation measures that can be adopted to alleviate potential adverse impacts. Environmental management and monitoring plans are also discussed in the context of ensuring adequate environmental protection during and after the conversion process.     

基于共词分析的城市生活垃圾治理公共政策变迁量化分析

以1979—2020年我国中央政府颁发的411份城市生活垃圾治理政策文本作为研究对象,运用共词与聚类分析方法研究了我国不同时期城市生活垃圾治理公共政策焦点的演变规律。结果发现:纵观我国城市生活垃圾治理公共政策焦点的演变轨迹,在"技术路线"、"垃圾属性"、"管理手段"、"治理结构"和"保障机制"方面发生了显著的政策主题变迁,呈现出垃圾治理朝更加绿色、更加经济方向发展的趋势。未来,应从监管体系、资源评估、财政补贴、空间布局4个方面保障生活垃圾零污染、高价值资源化治理。     

Health-care waste management in India.

Health-care waste management in India is receiving greater attention due to recent regulations (the Biomedical Wastes (Management & Handling) Rules, 1998). The prevailing situation is analysed covering various issues like quantities and proportion of different constituents of wastes, handling, treatment and disposal methods in various health-care units (HCUs). The waste generation rate ranges between 0.5 and 2.0 kg bed-1 day-1. It is estimated that annually about 0.33 million tonnes of waste are generated in India. The solid waste from the hospitals consists of bandages, linen and other infectious waste (30-35%), plastics (7-10%), disposable syringes (0.3-0.5%), glass (3-5%) and other general wastes including food (40-45%). In general, the wastes are collected in a mixed form, transported and disposed of along with municipal solid wastes. At many places, authorities are failing to install appropriate systems for a variety of reasons, such as non-availability of appropriate technologies, inadequate financial resources and absence of professional training on waste management. Hazards associated with health-care waste management and shortcomings in the existing system are identified. The rules for management and handling of biomedical wastes are summarised, giving the categories of different wastes, suggested storage containers including colour-coding and treatment options. Existing and proposed systems of health-care waste management are described. A waste-management plan for health-care establishments is also proposed, which includes institutional arrangements, appropriate technologies, operational plans, financial management and the drawing up of appropriate staff training programmes.     

Public Meetings About Local Waste Management Problems: Comparing Participants to Nonparticipants

One of the more traditional ways to involve citizens in environmental management in the United States is to hold a public meeting. Yet public meetings are also frequently criticized for stereotypical weaknesses, including a concern that citizens who attend public meetings do not accurately represent citizens who do not attend. To examine this concern in the context of local waste management problems, this study investigates whether citizens who attend public meetings differ from citizens who do not attend meetings. In the spring of 1998, residents in two New York communities facing local waste management problems received mailed questionnaires. Those surveyed included citizens who had previously attended state-sponsored public meetings about the waste sites and citizens who lived within one mile of the respective waste sites but had not attended any meetings. A comparison of demographic characteristics showed that, in both communities, citizens who attended meetings tended to report higher incomes and have children living at home. In one community, previous meeting participants tended to perceive greater risks from the waste site. In both communities, participants were less likely to consider certain sources of information about the waste sites, including the state environmental agency, state health agency, and the industries, as credible. Regardless of whether they had previously attended public meetings, respondents who perceived the risks as greater also perceived the sources as less credible. The conclusions suggest some potential challenges to effective communication at public meetings, including overcoming widespread skepticism and heightened concern among audience members.     

Integrated Use of GLEAMS and GIS to Prevent Groundwater Pollution Caused by Agricultural Disposal of Animal Waste

/ In modern intensive animal farming the disposal of a large amount of waste is of great concern, as, if not properly performed, it can cause the pollution of water, mainly because of the high content of nitrate and phosphate. This paper presents the results of a study intended to assess the environmental sustainability of animal waste disposal on agricultural soils in the alluvial plain of the River Chiana (Tuscany, Italy), a particularly sensitive area because of the high vulnerability of the shallow aquifer and of the intensive agricultural and breeding activities. With this aim, a strategy has been employed, that consists of the integrated use of a management model and GISs. The consequences on groundwater of applying animal waste to different kind of soils and crop arrangements have been simulated by means of the management model GLEAMS (Groundwater Loading Effects of Agricultural Management Systems, ver 2.01). As the huge amount of data required by such a sophisticated model does not allow applications at a scale larger than the field size, IDRISI and GRASS GIS packages have been used to divide the study area into land units, with homogeneous environmental characteristics, and then to generalize on these units the outputs of the model. The main conclusions can be synthesized as follows: The amount of animal waste produced in some of the investigated areas (i.e., municipal territory) is greater than that disposable on their own agricultural soil with no risks to the groundwater; consequently a cooperative approach among municipalities is necessary in order to plan waste disposal in a comprehensive and centralized way.KEY WORDS: Land use; Animal waste disposal; Groundwater protection; GIS, Management models     

Motives as Predictors of the Public's Attitudes Toward Solid Waste Issues

/ Surveys focusing on solid-waste-related issues, conducted over a period of several years, provided data from independent samples of residents of a Midwestern, USA, community. The collection of these data yielded useful information about the relationship between residents' recycling motives and their attitudes toward solid waste management in light of several changes in the solid waste infrastructure of the community over that time. The initial survey assessed baseline beliefs and attitudes, while later surveys were conducted after the implementation of a community educational program and a curbside recycling program. The findings indicated that for recyclers and nonrecyclers, different motives predicted endorsement of solid waste programs and policies. Although a similar percentage of recyclers and nonrecyclers were in support of various proposed programs and policies, concern for the environment was found to be positively related to nonrecyclers' support of proposed programs, particularly before these programs were implemented. Prior to program implementation, motives other than environmental altruism were found to be related to recyclers' support of the programs. Additional findings support the idea that educational programs and increased accessibility to recycling opportunities affect the relationship between people's attitudes toward solid waste management and their recycling motives.     

Assessing the accumulation of construction waste generation during residential building construction works

The difficulty of dealing with construction and demolition waste (CDW) on construction sites is not new and continues to be an environmental problem. Understanding the waste generated in a construction work is essential to optimize CDW management. Therefore, any tool used for establishing an estimation of the CDW that will be generated should be considered as an alternative to achieve real solutions pursuing sustainability. This paper presents the evolution of CDW flow generation in the construction of new residential buildings, and has identified that the construction activity is increasing the waste generation. In an attempt to find some solutions and provide improved alternatives, several building sites have been analysed in order to quantify the estimation of CDW generated. Results show that when using plasterboard walls the CDW generation, per m² of built surface can be reduced up to 15.94% compared to the use of traditional brick partitions. In addition, a model describing the accumulation of CDW throughout the project duration is proposed. This model states that CDW mainly accumulates in the middle stages of the project. This study allows an estimation of the amount of CDW to be generated in a building construction site, helping to plan the number and size of containers required at any moment of the construction process, as well as the space required for a proper CDW management.     

The influence of a voluntary fee in the consumption of plastic bags on supermarkets from Madeira Island (Portugal)

Since 2007, some supermarkets in Portugal have voluntarily abolished the free distribution of plastic bags, implementing a symbolic charge of €0.02 each at the same time that others still offer free plastic bags. This study assesses the influence of this voluntary measure on the reduction of plastic bags consumption, comparing clients from supermarkets that have adopted it with others who have free distribution. The reutilisation of bags reached 37% in supermarkets where customers pay a fee and was absent in supermarkets where plastic bags are free. Even the abstention of using bags, when clients buy only few products, is significantly higher in supermarkets where there are charges for plastic bags. The 2 cents charged has also induced a significant increase in optimal use of plastic bags since 52% of clients that pay for plastic bags use them so they are almost full, but only 17% do the same when they are free. Taken together, the different effects of charging for plastic bags represents a potential reduction of 64%. A mandatory tax on plastic bags is an important measure to reduce substantially the number of plastic bags consumed and to improve sustainability through the reduction of environmental, economic and social costs of pollution and waste management.