Role of NO in Hg oxidation over a commercial selective catalytic reduction catalyst V2O5–WO3/TiO2

Experiments were conducted in a fixed-bed reactor that contained a commercial catalyst, V₂O₅–WO₃/TiO₂, to investigate mercury oxidation in the presence of NO and O₂. Mercury oxidation was improved by NO, and the efficiency was increased by simultaneously adding NO and O₂. With NO and O₂ pretreatment at 350°C, the catalyst exhibited higher catalytic activity for Hg⁰ oxidation, whereas NO pretreatment did not exert a noticeable effect. Decreasing the reaction temperature boosted the performance of the catalyst treated with NO and O₂. Although NO promoted Hg⁰ oxidation at the very beginning, excessive NO counteracted this effect. The results show that NO plays different roles in Hg⁰ oxidation; NO in the gaseous phase may directly react with the adsorbed Hg⁰, but excessive NO hinders Hg⁰ adsorption. The adsorbed NO was converted into active nitrogen species (e.g., NO₂) with oxygen, which facilitated the adsorption and oxidation of Hg⁰. Hg⁰ was oxidized by NO mainly by the Eley–Rideal mechanism. The Hg⁰ temperature-programmed desorption experiment showed that weakly adsorbed mercury species were converted to strongly bound ones in the presence of NO and O₂.     

Role of NO in Hg~0 oxidation over a commercial selective catalytic reduction catalyst V_2O_5–WO_3/TiO_2

Experiments were conducted in a fixed-bed reactor that contained a commercial catalyst,V_2O_5–WO_3/TiO_2,to investigate mercury oxidation in the presence of NO and O_2.Mercury oxidation was improved by NO,and the efficiency was increased by simultaneously adding NO and O_2.With NO and O_2 pretreatment at 350°C,the catalyst exhibited higher catalytic activity for Hg~0 oxidation,whereas NO pretreatment did not exert a noticeable effect.Decreasing the reaction temperature boosted the performance of the catalyst treated with NO and O_2.Although NO promoted Hg~0 oxidation at the very beginning,excessive NO counteracted this effect.The results show that NO plays different roles in Hg~0oxidation; NO in the gaseous phase may directly react with the adsorbed Hg~0,but excessive NO hinders Hg~0 adsorption.The adsorbed NO was converted into active nitrogen species(e.g.,NO_2) with oxygen,which facilitated the adsorption and oxidation of Hg~0.Hg~0 was oxidized by NO mainly by the Eley–Rideal mechanism.The Hg~0 temperature-programmed desorption experiment showed that weakly adsorbed mercury species were converted to strongly bound ones in the presence of NO and O_2.     

V2O5-WO3/TiO2系SCR催化剂的钾中毒及再生方法

以钾为代表的碱金属元素会引发严重的SCR催化剂中毒现象.通过浸渍法和干混法使催化剂钾中毒,比较不同K₂O负载量下催化剂脱硝活性的变化.结果表明,采用浸渍法使K₂O的负载量达到1%时,催化剂的最大脱硝效率由100%下降到30%左右;而干混法负载1% K₂O的催化剂样品的脱硝活性变化较小.对浸渍法负载1% K₂O的催化剂样品的再生试验表明,水洗可以使中毒后催化剂的脱硝活性由30%升至70%以上;而使用1%的H₂SO₄溶液酸洗,则可以使350～500 ℃催化剂的脱硝活性高于中毒前.通过扫描电镜和抗压强度的对比分析发现,中毒与再生前后催化剂的微观形貌和机械性能均未发生很大改变.      

V2O5/TiO2催化剂中毒机理的试验研究

选择性催化还原(SCR)催化剂是SCR烟气脱硝技术的核心,是整个SCR系统脱硝效率和经济性的决定因素.本文工作的主要研究思路是以钒钛SCR催化剂为研究对象,研究了H2O和SO2,以及相同含量下K、Na、Ca、Pb的氧化物对钒钛催化剂NO转化率的影响.H2O的存在会抑制V2O5/TiO2催化剂脱硝活性,而SO2在一定程度上促进(V2O5/TiO2)催化剂的SCR脱硝反应,提高NO转化率;碱金属K对钒钛催化剂的钝化作用都是最强,K2O和Na2O的掺入会抑制钒钛催化剂上V2O5的还原能力,而CaO和PbO的掺入对钒钛催化剂上V2O5的还原能力影响较小.     

V2O5-WO3/TiO2脱硝催化剂的制备及其性能

对选择性催化还原脱硝用催化剂V2O5-WO3/TiO2的制备工艺进行了实验研究.采用溶胶-凝胶法制得TiO2凝胶,对凝胶进行不同条件下的干燥和煅烧处理,然后通过浸渍法在TiO2上依次负载WO3和V2O5,最终得到V2O5-WO3/TiO2催化剂.结果表明,TiO2凝胶的处理温度对催化剂结构和脱除NO的性能有一定的影响,TiO2凝胶干燥温度为105 ℃时制得的催化剂活性较高,在实验条件下NO脱除率最高可达98.3%.     

钒酸盐络合剂对V2O5/TiO2 SCR催化剂织构和催化性能的影响

以商业锐钛矿型TiO₂为载体,通过浸渍法制备了3种不同钒酸盐络合剂的V₂O₅/TiO₂催化剂,并考察不同钒酸盐络合剂对该3种催化剂SCR反应的影响。对前驱体溶液的钒配合物价态、pH值,以及对催化剂样品进行H₂-TPR、BET比表面积和孔结构特征、NH₃-TPD、XRD、拉曼光谱、紫外等表征。研究发现,不同络合剂会影响钒酸盐在前驱体溶液中的价态,同时影响前驱体溶液的pH值,但是在测试温度范围内,该3种催化剂的SCR反应在活性和N₂选择性均无明显区别。通过不同的表征方法可知:催化剂的比表面积、孔结构、表面钒氧化物的聚合程度、H₂反应活化能、催化剂表面酸量均没有明显区别,前驱体溶液中钒配合物的价态和pH值对催化剂样品的SCR反应催化性能没有明显影响。     

V2O5-WO3/TiO2催化剂与活性炭混合降解气相二噁英

基于二噁英稳定发生装置,研究在低温条件下(160℃)V2O5-WO3/Ti O2催化剂与2种活性炭(煤基活性炭及椰基活性炭)的物理混合物对气相二噁英(毒性当量质量浓度为9.80 ng·m-3)催化降解作用.结果表明,在加入活性炭后,二噁英的脱除效率及降解效率都有一定提高(20%左右).与椰基混合物相比,虽然煤基混合物对二噁英的脱除效果较弱,但其降解效果更好.调整混合物的比例会造成二噁英脱除效率及降解效率的改变,总的来说,在提高催化剂的比例后,二噁英脱除效率略有下降,但降解效率会有较为明显的提升.当反应气氛中的氧体积分数为0%时,将严重影响催化剂活性,导致绝大部分二噁英被吸附在混合物中而无法被催化氧化,随着氧体积分数的提高,二噁英的降解效率将大幅提高.为了提高二噁英的降解效率,向反应系统引入200 mg·m-3的臭氧,实验结果表明在一定条件下臭氧可以提高二噁英的催化氧化效果,但同时会与混合物中的活性炭发生反应,影响混合物的使用寿命.引入臭氧后,当煤基混合物配比为1∶1,反应温度为200℃时,二噁英的脱除及降解效率达到最高,分别达到98.0%和94.8%,尾气中的二噁英的毒性当量质量浓度仅为0.51 ng·m-3.     

Catalytic liquid-phase oxidation of acetaldehyde to acetic acid over a Pt/CeO2–ZrO2–SnO2/γ-alumina catalyst

Pt/CeO₂–ZrO₂–SnO₂/γ-Al₂O₃ catalysts were prepared by co-precipitation and wet impregnation methods for catalytic oxidation of acetaldehyde to acetic acid in water. In the present catalysts, Pt and CeO₂–ZrO₂–SnO₂ were successfully dispersed on the γ-Al₂O₃ support. Dependences of platinum content and reaction time on the selective oxidation of acetaldehyde to acetic acid were investigated to optimize the reaction conditions for obtaining both high acetaldehyde conversion and highest selectivity to acetic acid. Among the catalysts, a Pt(6.4 wt.%)/Ce_0.68Zr_0.17Sn_0.15O_2.0(16 wt.%)/γ-Al₂O₃ catalyst showed the highest acetaldehyde oxidation activity. On this catalyst, acetaldehyde was completely oxidized after the reaction at 0°C for 8 hr, and the selectivity to acetic acid reached to 95% and higher after the reaction for 4 hr and longer.     

ZrO2掺杂对V2O5-MoO3/TiO2催化剂脱硝性能的影响

采用浸渍法制备了一系列V₂O₅-MoO₃/TiO₂和V₂O₅-MoO₃/TiO₂-ZrO₂催化剂,考察了ω(V₂O₅/TiO₂)、ω(MoO₃/TiO₂)及ω(ZrO₂/TiO₂)对催化剂选择性催化还原NO性能的影响。结果表明:ω(V₂O₅/TiO₂)为3%,ω(MoO₃/TiO₂)为6%,ω(ZrO₂/TiO₂)为30%的催化剂具有最佳的脱硝活性、较低的SO₂氧化率及较好的抗硫抗水性能。采用XRD、TG、BET、SEM、H₂-TPR及NH₃-TPD等手段,对上述催化剂的理化性能及结构进行表征。结果表明:掺杂ZrO₂的催化剂具有更好的选择性催化还原NO活性,这与其较大的比表面积、较多的表面羟基、均匀的粒径、优良的氧化还原性能和较多的弱酸性位有关。     

V2O5/TiO2与MoO3/TiO2催化剂表面结构形貌及其对催化氧化碳烟活性的影响

为研究纳米级V₂O₅与MoO₃催化剂表面结构对其催化氧化碳烟活性的影响,以TiO₂为载体,采用等体积浸渍法制备了不同负载率(5%、10%、20%、40%)的V₂O₅/TiO₂与MoO₃/TiO₂催化剂,通过扫描电镜(SEM)、X射线衍射仪(XRD)对比研究了2种催化剂在TiO₂载体上的分散状态及物相结构.以Printex-U碳黑为试验用碳烟,采用热重分析仪对V₂O₅与MoO₃催化剂催化碳烟氧化的活性进行了比较.结果表明:V₂O₅与MoO₃在TiO₂载体上均存在一个单层分散饱和阈值,分别为V20(负载率为20%,下同)、Mo10,在该阈值前后活性组分在载体上分别以单层分散状态和明显的晶态存在.对于V₂O₅催化剂,其最佳催化活性出现在负载率接近单层分散饱和阈值时,与无催化状态相比,T_i(起燃温度)、T_p(最大失重率温度)以及T_f(燃尽温度)分别下降了69.1、46.0、23.0 ℃,有明显的阈值效应.而对于MoO₃催化剂,因其自身低熔点性而表现出良好的表面迁移能力,再加上α-MoO₃晶体特有的层状结构,使其可释放出更多的晶格氧,随着负载率的增加,该催化剂催化氧化碳烟活性持续增加,并且未观察到明显的阈值效应.研究显示,在相同负载率下,MoO₃催化剂催化氧化碳烟活性均高于V₂O₅催化剂.      

Ce掺杂低钒V2O5-WO3/TiO2催化剂脱除烟气元素汞的研究

制备了Ce掺杂的低矾V₂O₅-WO₃/TiO₂催化剂,在模拟燃煤烟气条件下开展Hg⁰的脱除实验.结果表明该催化剂具有很好的Hg⁰脱除能力,在200～500℃的温度范围内能脱除烟气中95%的Hg⁰.催化剂表征结果表明,比表面积、 孔容和孔径与汞脱除能力没有显著相关性.XPS的结果表明,催化剂表面的Ce是以Ce⁴⁺的形式存在,有利于Hg⁰的脱除反应.抗硫抗水实验表明,H₂O会轻微抑制Hg⁰的脱除反应,主要原因是H₂O和Hg⁰在样品表面的竞争吸附;SO₂会促进Hg⁰的脱除反应,原因是SO₂能增加样品表面的酸吸附位且增加表面Hg⁰的吸附量.     

柱状V2O5/AC中V2O5的分布特征对烟气脱硫活性的影响

采用过量浸渍(XS)、等体积浸渍(PV)和半等体积浸渍(HPV)方法,分别制得3种柱状V₂O₅/AC催化剂,并对其脱硫能力进行评价.结果表明:尽管这3种方法制取的催化剂总w(V₂O₅)相同(均为0.5%),但V₂O₅在柱状颗粒中的分布差异却很大;其中半等体积浸渍法制备的催化剂外层w(V₂O₅)最高,等体积浸渍法的w(V₂O5)居中,过量浸渍法的w(V₂O₅)最低.脱硫前期,催化剂外层的w(V₂O₅)对脱硫活性的影响很大,外层w(V₂O₅)高的催化剂脱硫活性较高;脱硫后期,催化剂外层w(V₂O₅)对脱硫活性的影响变小,而内层w(V₂O₅)的影响变大,内层w(V₂O₅)高的催化剂脱硫活性较高.      

钒和钨负载量对V2O5-WO3/TiO2表面形态及催化性能的影响

采用浸渍法制备了一系列不同钒和钨负载量的V₂O₅-WO₃/TiO₂催化剂样品,对样品NH₃选择性催化还原NO性能进行了评价,并用BET、XRD、XPS等手段对催化剂样品的表面形态进行了表征.研究发现,钒的负载量对催化剂的比表面积和催化活性有显著影响,当钒负载量从1％升高到8％时,催化剂比表面积下降了16 m²/g,最高活性温度降低了约100℃.钨起到稳定剂和助剂的双重作用,当钒负载量为1％时,钨负载量从0升高到6％,催化剂比表面积仅下降了3 m²/g,而活性温度窗口向高温和低温各拓宽了约50℃.研究表明钒和钨负载量都能影响催化剂表面的VO_x物种,但对催化剂的表面晶型没有明显影响.     

Enhanced catalytic complete oxidation of 1,2-dichloroethane over mesoporous transition metal-doped γ-Al2O3

High-surface-area mesoprous powders of γ-Al₂O₃ doped with Cu²⁺, Cr³⁺, and V³⁺ ions were prepared via a modified sol-gel method and were investigated as catalysts for the oxidation of chlorinated organic compounds. The composites retained high surface areas and pore volumes comparable with those of undoped γ-Al₂O₃ and the presence of the transition metal ions enhanced their surface acidic properties. The catalytic activity of the prepared catalysts in the oxidation of 1,2-dichloroethane (DCE) was studied in the temperature range of 250-400℃. The catalytic activity and product selectivity were strongly dependent on the presence and the type of dopant ion. While Cu²⁺- and Cr³⁺-containing catalysts showed 100% conversion at 300℃ and 350℃, V³⁺-containing catalyst showed considerably lower conversion. Furthermore, while the major products of the reactions over γ-alumina were vinyl chloride (C₂H₃Cl) and hydrogen chloride (HCl) at all temperatures, Cu- and Cr-doped catalysts showed significantly stronger capability for deep oxidation to CO₂.     

Enhanced catalytic complete oxidation of 1,2-dichloroethane over mesoporous transition metal-doped γ-Al2O3

High-surface-area mesoprous powders of γ-Al₂O₃ doped with Cu^2 +, Cr^3 +, and V^3 + ions were prepared via a modified sol–gel method and were investigated as catalysts for the oxidation of chlorinated organic compounds. The composites retained high surface areas and pore volumes comparable with those of undoped γ-Al₂O₃ and the presence of the transition metal ions enhanced their surface acidic properties. The catalytic activity of the prepared catalysts in the oxidation of 1,2-dichloroethane (DCE) was studied in the temperature range of 250–400°C. The catalytic activity and product selectivity were strongly dependent on the presence and the type of dopant ion. While Cu^2 +- and Cr^3 +-containing catalysts showed 100% conversion at 300°C and 350°C, V^3 +-containing catalyst showed considerably lower conversion. Furthermore, while the major products of the reactions over γ-alumina were vinyl chloride (C₂H₃Cl) and hydrogen chloride (HCl) at all temperatures, Cu- and Cr-doped catalysts showed significantly stronger capability for deep oxidation to CO₂.     

Activity and hydrothermal stability of CeO2–ZrO2–WO3 for the selective catalytic reduction of NOx with NH3

A series of CeO_2–ZrO_2–WO_3(CZW)catalysts prepared by a hydrothermal synthesis method showed excellent catalytic activity for selective catalytic reduction(SCR)of NO with NH_3 over a wide temperature of 150–550°C.The effect of hydrothermal treatment of CZW catalysts on SCR activity was investigated in the presence of 10% H_2O.The fresh catalyst showed above 90% NO_x conversion at 201–459°C,which is applicable to diesel exhaust NO_x purification(200–440°C).The SCR activity results indicated that hydrothermal aging decreased the SCR activity of CZW at low temperatures(below 300°C),while the activity was notably enhanced at high temperature(above 450°C).The aged CZW catalyst(hydrothermal aging at 700°C for 8 hr)showed almost 80% NO_x conversion at 229–550°C,while the V_2O_5–WO_3/TiO_2 catalyst presented above 80% NO_x conversion at 308–370°C.The effect of structural changes,acidity,and redox properties of CZW on the SCR activity was investigated.The results indicated that the excellent hydrothermal stability of CZW was mainly due to the CeO_2–ZrO_2 solid solution,amorphous WO_3 phase and optimal acidity.In addition,the formation of WO_3 clusters increased in size as the hydrothermal aging temperature increased,resulting in the collapse of structure,which could further affect the acidity and redox properties.     

Preparation and characterization of Fe2O3-CeO2-TiO2/γ-Al2O3 catalyst for degradation dye wastewater

In order to develop a catalyst with high activity for catalytic wet oxidation （CWO） process at room temperature and atmospheric pressure, Fe2O3-CeO2-TiO2/γ-Al2O3 catalyst was prepared by consecutive impregnation method and the prepared parameters were optimized. The structure of the catalyst was characterized by BET, XRF, SEM and XPS technologies, and the actual wastewater was used to investigate the catalytic activity of Fe2O3-CeO2-TiO2/γ-Al2O3 in CWO process. The experimental results showed that the prepared catalyst exhibited good catalytic activity when the doping amount of Ti was 1.0 wt% （the weight ratio of Ti to carriers）, and the middle product, Fe2O3-CeO2-TiO2/γ-Al2O3, was calcined in 450℃ for 2 h. The CWO experiment for treating actual dye wastewater indicated that the COD, color and TOC of actual wastewater were decreased by 62.23%, 50.12% and 41.26% in 3 h, respectively, and the ratio of BOD5/COD was increased from 0.19 to 0.30.     

Kinetics of photoelectrocatalytic degradation of humic acid using B2O3·TiO2/Ti photoelectrode

An innovative photoelectrode, B₂O₃·TiO₂/Ti electrode, was prepared by galvanostaticanodisation. The morphology and crystalline texture of the B₂O₃·TiO₂ film on electrode were examined by acomic force microscopy (AFM) and X-ray diffraction respectively. The examination results indicated that the anatase was the dominant component. The kinetics of photoelectrocatalytic(PEC) degradation of humic acid(HA) was investigated; the results demonstrated that effects from strongness to weakness on the photoelectrocatalytic degraded rate of humic acid: power of UV-lamp, area of TiO₂ film, bias, original concentration of humic acid solution. The optimum conditions were power of UV-lamp 125 W, area of TiO2 film 42.0 cm² , bias 1.4 V, original concentration of humic acid solution 5 mg/L in this PEC reaction system.     

Nano-sized Fe2O3/Fe3O4 facilitate anaerobic transformation of hexavalent chromium in soil–water systems

The purpose of this study is to investigate the effects of nano-sized or submicro Fe_2O_3/Fe_3O_4 on the bioreduction of hexavalent chromium(Cr(VI)) and to evaluate the effects of nano-sized Fe_2O_3/Fe_3O_4 on the microbial communities from the anaerobic flooding soil.The results indicated that the net decreases upon Cr(VI) concentration from biotic soil samples amended with nano-sized Fe_2O_3(317.1 ± 2.1 mg/L) and Fe_3O_4(324.0 ± 22.2 mg/L) within21 days,which were approximately 2-fold of Cr(VI) concentration released from blank control assays(117.1 ± 5.6 mg/L).Furthermore,the results of denaturing gradient gel electrophoresis(DGGE) and high-throughput sequencing indicated a greater variety of microbes within the microbial community in amendments with nano-sized Fe_2O_3/Fe_3O_4 than the control assays.Especially,Proteobacteria occupied a predominant status on the phylum level within the indigenous microbial communities from chromium-contaminated soils.Besides,some partial decrease of soluble Cr(VI) in abiotic nano-sized Fe_2O_3/Fe_3O_4 amendments was responsible for the adsorption of nano-sized Fe_2O_3/Fe_3O_4 to soluble Cr(VI).Hence,the presence of nano-sized Fe_2O_3/Fe_3O_4 could largely facilitate the mobilization and biotransformation of Cr(VI) from flooding soils by adsorption and bio-mediated processes.     

Radioactive tracer of the photochemical reaction of 14CS2 with OH in the presence of O2

The photochemical reaction of¹⁴CS ₂ with OH has been studied．The results indicated that the main products of the reaction were¹⁴COS and ¹⁴CO with a small amount of ¹⁴CO₂ in the reaction system(¹⁴CS₂-H₂O₂-C₃H₈-N₂-O₂>)．The reaction was promoted by oxygen．¹⁴COS and ¹⁴CO had the similar kinetic curves while ¹⁴CO₂ got a different kind of Curve．The overall rate constant increased with the increasing of oxygen partial pressure．The rate constant for the removal of ¹⁴CS₂ was K=3.4×10^-12cm³/(mO1.s) at 33330 Pa 0₂．The conversion of ¹⁴CS₂ to ¹⁴CO₂ at room temperature was observed and the possible mechanism of the photochemical reaction was disscussed．