Reduction of Cr(VI) by caffeic acid

In the soil-plant system, the Cr(VI) toxicity can be moderated through redox reactions involving phenolic substances. In such a context, we report the reducing activity of caffeic acid (CAF) towards Cr(VI) in aqueous phase. The redox reaction between Cr(VI) and CAF was studied as a function of both time and pH at different initial metal concentrations. The reaction was particularly effective at pH 2.5. The kinetic data indicate that the reaction proceeds through two steps: the first is faster and involves four electrons, the latter, which is slower, five electrons. The chromatograms evidence the formation of oxidation products (OP) with a different redox activity towards Cr(VI). A yield of Cr(III) equal to that obtained at pH 2.5 and pH 3.1 in about 7 and 25 h, respectively, was reached at pH 4.2 only after a much longer reaction time (50h). At pH>4.2 the reaction occurred even more slowly, and its kinetic trend was more and more difficult to study at pH values higher than 5.0 due to the formation of precipitates. Other phenolics investigated (o-, m-, p-coumaric acids) showed a reducing activity negligible compared to that of CAF: about 30% of p-coumaric acid was oxidized at pH 2.5 only after two months of reaction.     

Potential application of highly reactive Fe(0)/Fe3O4 composites for the reduction of Cr(VI) environmental contaminants

We describe the use of highly reactive Fe(0)/Fe3O4 composites for the reduction of Cr(VI) species in aqueous medium. The composites were prepared by simple mechanical alloying of metallic iron and magnetite in different proportions, i.e. Fe(0) 25, 50, 75 and 90wt%. While after 3h of reaction pure Fe(0) and pure Fe3O4 showed only a low reduction efficiency of 15% and 25% Cr(VI) conversion, respectively, the composites, in particular Fe(0)(25wt%)/Fe3O4, showed a remarkable activity with ca. 65% Cr(VI) conversion. Kinetic experiments showed a high reaction rate during the first 3h, which subsequently decreased strongly, probably due to a pH increase from 6 to 8. Experiments with composites based on Fe(0)/alpha-Fe2O3, Fe(0)/gamma-Fe2O3 and Fe(0)/FeOOH showed very low activities, suggesting that Fe(oct)2+ in the magnetite structure plays an important role in the reaction. Scanning and high resolution electron microscopies and M?ssbauer spectra (transmission and conversion electron M?ssbauer spectroscopy) indicated that the mechanical alloying process promotes a strong interaction and interface between the metallic and oxide phases, with the Fe(0) particles completely covered by Fe3O4 particles. The high efficiency of the composite Fe(0)/Fe3O4 for Cr(VI) reduction is discussed in terms of a special mechanism where an electron is transferred from Fe(0) to magnetite to reduce Fe(oct)3+ to Fe(oct)2+, which is active for Cr(VI) reduction.     

Investigation of Cr(VI) reduction in continuous-flow activated sludge systems

The aim of this research was to investigate hexavalent chromium, Cr(VI), reduction by activated sludge and to evaluate the use of continuous-flow activated sludge systems for the treatment of Cr(VI)-containing wastewater. Three series of experiments were conducted using two parallel lab-scale activated sludge systems. During the first experiment, one system was used as a control, while the other received Cr(VI) concentrations equal to 0.5, 1, 3 and 5mg l(-1). For all concentrations added, approximately 40% of the added Cr(VI) was removed during the activated sludge process. Determination of chromium species in the dissolved and particulate phase revealed that the removed Cr(VI) was sorbed by the activated sludge flocs mainly as trivalent chromium, Cr(III), while the residual chromium in the dissolved phase was mainly detected as Cr(VI). Activated sludge ability to reduce Cr(VI) was independent of the acclimatization of biomass to Cr(VI) and it was not affected by the toxic effect of Cr(VI) on autotrophic and heterotrophic microorganisms. During the second experiment, both systems were operated under two different hydraulic residence time (theta equal to 20 and 28h) and three different initial organic substrate concentration (COD equal to 300, 150 and 0mg l(-1)). Cr(VI) reduction was favored by an increase of theta, while it was limited by influent COD concentration. Finally, at the last experiment the effect of anoxic and anaerobic reactors on Cr(VI) reduction was investigated. It was observed that the use of an anoxic zone or an anaerobic-anoxic zone ahead of the aerobic reactor favored Cr(VI) reduction, increasing mean percentage Cr(VI) reduction to almost 80%.     

Process enhancing strategies for the reduction of Cr(VI) to Cr(III) via photocatalytic pathway

Environmental Science and Pollution Research - This discourse aimed at providing insight into the strategies that can be adopted to boost the process of photoreduction of Cr(VI) to Cr(III). Cr(VI)...     

Reduction of Cr(VI) by malic acid in aqueous Fe-rich soil suspensions

Detoxification of Cr(VI) through reduction by organic reductants has been regarded as an effective way for remediation of Cr(VI)-polluted soils. However, such remediation strategy would be limited in practical applications due to the low Cr(VI) reduction rate. In this study, the catalytic effect of two Fe-rich soils (Ultisol and Oxisol) on Cr(VI) reduction by malic acid was evaluated. As the results shown, the two soils could obviously accelerate the reduction of Cr(VI) by malic acid at low pH conditions, while such catalytic effect was gradually suppressed as the increase in pH. After reaction for 48 h at pH 3.2, Oxalic acid was found in the supernatant of Ultisol, suggesting the oxidization of hydroxyl in malic acid to carboxyl and breakage of the bond between C₂ and C₃. It was also found that the catalytic reactivity of Ultisol was more significant than that of Oxisol, which could be partly attributed to the fact that the amount of Fe(II) released from the reductive dissolution of Ultisol by malic acid was larger than that of Oxisol. With addition of Al(III), the catalytic effect from Ultisol was inhibited across the pH range examined. On the contrary, the presence of Cu(II) would increase the catalytic effect of Ultisol, which was more pronounced with the increase in pH. This study proposed a potential way for elimination of the environmental risks posed by the Cr(VI) contamination by use of the natural soil surfaces to catalyze Cr(VI) reduction by the organic reductant such as malic acid, a kind of organic reductant originating from soil organic decomposition process or plant excretion.     

Removal of Cr(VI) and humic acid by using TiO2 photocatalysis

The removal efficiencies of Cr(VI) and HA, using a TiO(2)-mediated photocatalytic process, were investigated with variations in the pH, TiO(2) dosage and Cr(VI)/HA ratio. During the photocatalytic reaction, the total removal of Cr(VI) occurred through adsorption onto TiO(2), as well as its reduction to Cr(III). However, oxidation and adsorption were identified as important removal processes for the treatment of HA. Due to the anionic type adsorption onto TiO(2) and its acid-catalyzed photocatalytic reduction, the removal of Cr(VI) decreased with increasing pH, while that of HA increased with increasing pH. The TiO(2) dosage was also an important parameter for the removal of Cr(VI). As the TiO(2) dosage was increased to 2.5 g l(-1), the removal of Cr(VI) was continuously enhanced, but decreased at dosages above 3 g l(-1) due to the increased blockage of the incident UV light used for the photocatalytic reaction. The removal of Cr(VI) was greatly enhanced when the system contained both HA and Cr(VI) compared to Cr(VI) alone. Also, the removal of HA was greatly enhanced when the system contained both HA and Cr(VI) compared to HA alone. The removal of Cr(VI) was continuously enhanced as the HA concentration gradually increased; however, no further increase was observed above 20 mg l(-1) HA due to the increased absorption of the UV light. This result supports that the photocatalytic reaction, with illuminated TiO(2), could be applied to more effectively treat wastewater containing both Cr(VI) and HA than that containing a single species only.     

Simultaneous extraction of Cr(VI) and Cu(II) from humic acid with new synthesized EDTA derivatives

Soil washing is one of the few permanent treatment alternatives for removing metal contaminants. Ethylenediaminetetraacetic acid and its salts (EDTA) is very effective at removing cationic metals and has been utilized globally. However it is ineffective for anionic metal contaminants or metals bound to soil organic matter. The simultaneous removal of cationic and anionic metal contaminants by soil washing is difficult due to differences in their properties. The present study evaluated the potential of a washing process using two synthesized EDTA-derivatives, C₆HEDTA (2,2′-((2-((carboxymethyl)(2-(hexanoyloxy)ethyl)amino)ethyl)azanediyl)diacetic acid) and C₁₂HEDTA (2,2′-((2-((carboxymethyl) (2-(dodecanoyloxy)ethyl)amino)ethyl)azanediyl)diacetic acid), which consist of a hydrophilic polycarboxylic moiety and a hydrophobic moiety with a monoalkyl ester group. A series of equilibrium batch experiments at room temperature were conducted to investigate the efficacy of C₆HEDTA and C₁₂HEDTA as extractants for both oxyanion Cr(VI) and cationic Cu(II). Results showed that either C₆HEDTA or C₁₂HEDTA can extract both Cr(VI) and Cu(II) from humic acid simultaneously. However, C₆HEDTA was less effective for Cr(VI) probably because it has no surface activities to increase solubility of humic acid, like C₁₂HEDTA. Extraction of Cr(VI) was mainly attributed to the decreased surface tension and enhanced solubility of organic matter. Extraction of Cu(II) was attributed to both the Cu(II) chelation and enhanced solubility of humic acid. It was demonstrated that the hydrophilic polycarboxylic moiety of C₁₂HEDTA chelates cations while the monoalkyl ester group produces surface active properties that enhance the solubility of humic acid.     

Decomplexation of Cr(III)-EDTA and simultaneous abatement of total Cr by photo-oxidation: efficiency and in situ reduction of intermediate Cr(VI)

Environmental Science and Pollution Research - Most prevailing processes are incapable of removing Cr(III)-organic complexes efficiently and facing the problem of in-process formation of highly...     

Graphical estimation of the dual-enzyme kinetic parameters for Cr(VI) reduction

Chromium(VI) (Cr(VI)) contamination of soil and groundwater is a major environmental concern. Bioreduction of Cr(VI) by Shewanella oneidensis MR-1 (MR-1) can be considered a feasible option to reduce the toxic and mobile Cr(VI) to the less toxic and less mobile chromium(III) (Cr(III)). The reaction rate expression for Cr(VI) reduction is nonlinear and the rate constants are evaluated by employing nonlinear optimization techniques. The outcome of the optimization techniques, in general, depends on the initial estimate of the kinetic parameters which is not always available. A graphical approach based on sound mathematical reasoning has been developed which is accurate, simpler to use, and can provide the best initial estimate for nonlinear optimization.     

基于硫酸亚铁的机械化学还原法处理六价铬污染土壤

通过机械化学还原法对六价铬污染土壤进行固化稳定化处理,采用《固体废物 浸出毒性浸出方法 硫酸硝酸法》（HJ/T 299-2007）对处理效果进行评价,以及使用激光粒度仪、SEM和XPS对处理前后土壤样品的粒径、形貌以及铬的价态变化等性质进行表征。分析结果显示,机械化学还原法处理可以有效降低土壤中六价铬的浸出浓度。当未添加七水合硫酸亚铁时,土壤中六价铬的浸出浓度由115 mg·L-1降低至2.0 mg·L-1;而添加七水合硫酸亚铁作为还原剂时,六价铬浸出浓度由115 mg·L-1降至0.16 mg·L-1。另外,经过机械化学还原处理后的土壤样品颗粒变细并形成致密的团聚体以及发生六价铬向三价铬的转化。     

零价铁对水中六价铬还原性能及沉淀污泥中铬的固定化

采用零价铁还原水中六价铬,考察了溶液初始pH、铁粉投量、反应温度及水体中常见阴阳离子对还原效率的影响,得出其工艺参数为:初始pH=3.0,反应时间t=30 min,反应温度为室温,Fe0与Cr(VI)质量比为1 000: 1。将还原后产生的三价铬以沉淀形式从水中彻底分离出来,并对其进行了碱激发矿渣固定化处理,考察了固定化样品中Cr在不同环境条件下的浸出水平,结果表明,固定化处理能有效控制沉淀污泥中Cr的浸出。     

酸碱改性生物质炭-纳米零价铁增强六价铬去除的机理

通过氢氟酸和氢氧化钠改性水稻秸秆生物质炭(BC),得到改性材料BC-HF和BC-NaOH,在此基础上负载纳米零价铁(Nanoscale zero-valent iron,nZVI)制得生物质炭负载纳米零价铁(nZVI@BC)、氢氟酸改性生物质炭负载纳米零价铁(nZVI@BC-HF)和氢氧化钠改性生物质炭负载纳米零价铁(nZVI@BC-NaOH)。通过比表面积分析、元素分析、红外光谱分析、X射线衍射分析以及动力学等方法,研究了不同材料对Cr(Ⅵ)的去除性能与机理。结果表明：酸碱改性后的生物质炭比表面积、孔体积显著增加,促进了Cr(Ⅵ)的去除,BC-HF和BC-NaOH对Cr(Ⅵ)的去除量分别为30.87、19.59 mg·g⁻¹,为BC的2.68、1.70倍;负载nZVI后,进一步增强了Cr(Ⅵ)的去除效果,其中,nZVI@BC-HF和nZVI@BC-NaOH对Cr(Ⅵ)的去除效果显著,去除量分别为76.36、65.62 mg·g⁻¹。酸碱改性生物质炭使nZVI得到了有效分散,其表面的Si-O-Si官能团与nZVI耦合成Si-O-Fe键,增强了nZVI对Cr(Ⅵ)的还原;同时,酸碱改性生物质炭负载nZVI促进了铁铬化合物的结晶,有利于反应的持续进行。本研究表明,酸碱改性生物质炭-纳米零价铁复合材料对于地下水中Cr(Ⅵ)的去除具有较大的应用潜力。     

赋硫活性炭对Cr(VI)的吸附机理

以商品活性炭(AC)为原料,制备具有含硫官能团的赋硫活性炭(SAC),对比研究了2种活性炭对Cr(VI)的等温吸附及吸附动力学;同时,用付立叶变换红外光谱(FT-IR),拉曼光谱(Raman),X射线光电子能谱(XPS)等分析方法表征吸附前后的活性炭表面官能团的变化。结果表明,赋硫改性使活性炭表面生成了S-S,噻吩,O=S=O等含硫官能团,为吸附Cr(VI)提供更多活性位点。Langmuir吸附模型非线性拟合能较好地描述AC对Cr(VI)的等温吸附,而SAC对Cr(VI)的吸附过程则以Freundlich吸附模型非线性拟合结果更好,准二级动力学模型非线性拟合比较吻合AC与SAC对Cr(VI)的吸附动力学。与AC相比,SAC对Cr(VI)的平衡吸附量在25、35和45℃下分别增加了55.20%、29.16%和85.76%。     

Remediation of Cr(VI) from chromium slag by biocementation

Here we demonstrate a calcifying ureolytic bacterium Bacillus sp. CS8 for the bioremediation of chromate (Cr(VI)) from chromium slag based on microbially induced calcite precipitation (MICP). A consolidated structure like bricks was prepared from chromium slags using bacterial cells, and five stage Cr(VI) sequential extraction was carried out to know their distribution pattern. Cr(VI) mobility was found to significantly be decreased in the exchangeable fraction of Cr slag and subsequently, the Cr(VI) concentration was markedly increased in carbonated fraction after bioremediation. It was found that such Cr slag bricks developed high compressive strength with low permeability. Further, leaching behavior of Cr(VI) in the Cr slag was studied by column tests and remarkable decrease in Cr(VI) concentration was noticed after bioremediation. Cr slags from columns were characterized by SEM–EDS confirming MICP process in bioremediation. The incorporation of Cr(VI) into the calcite surface forms a strong complex that leads to obstruction in Cr(VI) release into the environment. As China is facing chromium slag accidents at the regular time intervals, the technology discussed in the present study promises to provide effective and economical treatment of such sites across the country, however, it can be used globally.     

In vitro Cr(VI) reduction by cell-free extracts of chromate-reducing bacteria isolated from tannery effluent irrigated soil

Four efficient Cr(VI)-reducing bacterial strains were isolated from rhizospheric soil of plants irrigated with tannery effluent and investigated for in vitro Cr(VI) reduction. Based on 16S rRNA gene sequencing, the isolated strains SUCR44, SUCR140, SUCR186, and SUCR188 were identified as Bacillus sp. (JN674188), Microbacterium sp. (JN674183), Bacillus thuringiensis (JN674184), and Bacillus subtilis (JN674195), respectively. All four isolates could completely reduce Cr(VI) in culture media at 0.2 mM concentration within a period of 24–120 h; SUCR140 completely reduced Cr(VI) within 24 h. Assay with the permeabilized cells (treated with Triton X-100 and Tween 80) and cell-free assay demonstrated that the Cr(VI) reduction activity was mainly associated with the soluble fraction of cells. Considering the major amount of chromium being reduced within 24–48 h, these fractions could have been released extracellularly also during their growth. At the temperature optima of 28 °C and pH?7.0, the specific activity of Cr(VI) reduction was determined to be 0.32, 0.42, 0.34, and 0.28 μmol Cr(VI)?min^?1?mg^?1 protein for isolates SUCR44, SUCR140, SUCR186, and SUCR188, respectively. Addition of 0.1 mM NADH enhanced the Cr(VI) reduction in the cell-free extracts of all four strains. The Cr(VI) reduction activity in cell-free extracts of all the isolates was stable in presence of different metal ions tested except Hg²⁺. Beside this, urea and thiourea also reduced the activity of chromate reduction to significant levels.     

Simultaneous reduction of Cr(VI) and oxidation of As(III) by Bacillus firmus TE7 isolated from tannery effluent

Hexavalent chromium [Cr(VI)] and arsenite [As(III)] are the most toxic forms of chromium and arsenic respectively, and reduction of Cr(VI) to Cr(III) and oxidation of As(III) to As(V) has great environmental implications as they affect toxicity and mobility of these toxic species. Bacillus firmus strain TE7, resistant to chromium and arsenic was isolated from tannery effluent. The strain exhibited ability to reduce Cr(VI) and oxidize As(III). It reduced 100 mg L^?1 Cr(VI) within 60 h in nutrient broth and oxidized 150 mg L^?1 As(III) within 10 h in minimal medium. It also completely reduced 15 mg L^?1 Cr(VI) and oxidized 50 mg L^?1 of As(III) simultaneously in minimal medium. To the best of our knowledge, this is the first bacterial strain showing simultaneous reduction of Cr(VI) and oxidation of As(III) and is a potential candidate for bioremediation of environments contaminated with these toxic metal species.     

Effect of Fe (III) on acid degradation of methylparathion

A study was undertaken to determine the transformation kinetic of methylparathion (O, O, -dimethyl O-4 nitrophenylphosphorotioate) in the presence of Fe(III) between pH 2 and 7. The Fe(III) was not electroactive under the conditions used in this study, and polarographic signals were exhibited by methylparathion and main degradation product only. Data suggest that hydrolysis of methylparathion in an acid medium is catalyzed by Fe(III) and the pesticide did not degrade in this medium without this cation. Methylparathion degradation was observed at all the pHs studied and was independent of the predominant chemical form of Fe(III) in the aqueous medium. The reaction was first-order with pH-dependent rate constant (k) values ranging from 3.3 x 10(- 3) h(- 1) to 7.0 x 10(- 3) h(- 1). The k values increased as pH decreased, suggesting that Fe(III) acted as an electrophile in the reaction mechanism.     

Effect of Fe (III) on acid degradation of methylparathion

A study was undertaken to determine the transformation kinetic of methylparathion (O, O, -dimethyl O-4 nitrophenylphosphorotioate) in the presence of Fe(III) between pH 2 and 7. The Fe(III) was not electroactive under the conditions used in this study, and polarographic signals were exhibited by methylparathion and main degradation product only. Data suggest that hydrolysis of methylparathion in an acid medium is catalyzed by Fe(III) and the pesticide did not degrade in this medium without this cation. Methylparathion degradation was observed at all the pHs studied and was independent of the predominant chemical form of Fe(III) in the aqueous medium. The reaction was first-order with pH-dependent rate constant (k) values ranging from 3.3 × 10^{? 3} h^{? 1} to 7.0 × 10^{? 3} h^{? 1}. The k values increased as pH decreased, suggesting that Fe(III) acted as an electrophile in the reaction mechanism.     

Cr(VI) uptake mechanism of Bacillus cereus

In this study, we investigated the Cr(VI) uptake mechanism in an indigenous Cr(VI)-tolerant bacterial strain -Bacillus cereus through batch and microscopic experiments. We found that both the cells and the supernatant collected from B. cereus cultivation could reduce Cr(VI). The valence state analysis revealed the complete transformation from Cr(VI) into Cr(III) by living B. cereus. Further X-ray absorption fine structure and Fourier transform infrared analyses showed that the reduced Cr(III) was coordinated with carboxyl and amido functional groups from either the cells or supernatant. Scanning electron microscopy and atomic force microscopy observation showed that noticeable Cr(III) precipitates were accumulated on bacterial surfaces. However, Cr(III) could also be detected in bacterial inner portions by using transmission electron microscopy thin section analysis coupled with energy dispersive X-ray spectroscopy. Through quantitative analysis of chromium distribution, we determined the binding ratio of Cr(III) in supernatant, cell debris and cytoplasm as 22%, 54% and 24%, respectively. Finally, we further discussed the role of bacterium-origin soluble organic molecules to the remediation of Cr(VI) pollutants.