Synthesis of chromium-containing pigments from chromium recovered from leather waste

Cobalt-chromite green and chrome-tin pink pigments have been prepared from chromium extracted from leather shavings produced as a waste product of the leather-tanning industry. The alkaline agent (NaOH, CaO, MgO, NH4OH) used in the extraction process influences the nature of the final product. The effect of the NH4OH:CaO ratio on the final product in the case of cobalt-chromite green was examined. The pigments obtained were characterized by FT-IR and X-ray diffraction (XRD). Colour measurements were compared with those recorded from materials prepared from pure Cr2O3. The leaching of Cr(VI) from the materials was examined by UV spectroscopy.     

Phosphate recovery from phosphorus-rich solution obtained from chicken manure incineration ash

The recovery of phosphorus from waste is very important for Japan because Japan has no natural phosphorus resources. In order to recover phosphorus from incineration ash of chicken manure, an acid dissolution–alkali precipitation method was investigated. Phosphorus content in the ash was 8%. The ash was treated with hydrochloric acid to obtain phosphorus-rich solution. Phosphorus could then be recovered as a precipitant by adding sodium hydroxide solution into the phosphorus-rich solution and gradually changing the pH in the solution to 3, 4, and 8. At pH 3, a small amount of phosphorus was precipitated to remove iron, which would cause coloring of subsequent precipitants. At pH 4, 84% of the phosphorus in the original solution could be recovered as CaHPO₄ · 2H₂O with a purity of 92%. At pH 8, 8% of the phosphorus in the phosphorus-rich solution could be recovered as identified hydroxyapatite. A recovery rate of 92% phosphorus as CaHPO₄ · 2H₂O and identified as hydroxyapatite was achieved.     

Bioethanol production from enzymatically saccharified lawn clippings from a golf course

The utilization of bioethanol is being focused on as a fuel alternative to oil and or natural gas. Bioethanol production from cellulosic plant residues is one of the solutions proposed for the problems caused by usage of food crops that are also vital for human consumption, such as sugar cane and corn, as a source of bioethanol. However, to utilize these new sources for bioethanol production, conditions for saccharification in each different material have not been optimized. In this study, we reported some optimum conditions for the saccharification of Korean lawn grass (KL) and bent grass (BG) using acremonium cellulase and endoglucanase as saccharifying enzymes for ethanol fermentation. With respect to saccharification of KL and BG, 0.19 and 0.18 g of d-glucose per g-substrate at maximum were produced, respectively. Comminution with a ball mill was found to be effective in the saccharification of KL, while ball-milled BG showed no significant improvement in saccharification. Being incorporated with 99 % of d-glucose consumption, saccharified KL was incubated for 3 days with Saccharomyces cerevisiae and Zymomonas mobilis, respectively, and each mixture fermented to ethanol yielding approximately 100 % of theoretical values from d-glucose consumption, respectively.     

Formation of recycled plastics from depolymerized monomers derived from waste fiber-reinforced plastics

To develop a new method for the chemical recycling of plastics, we examined the formation of recycled polymers from the recovered monomeric materials of solubilized waste fiber-reinforced plastics (FRP) under supercritical alcoholic conditions. Treatment of waste FRP with supercritical MeOH resulted in the formation of monomeric organic compounds that mainly contained dimethyl phthalate (DMP) and propylene glycol. The presence of these materials was confirmed by gas chromatography and nuclear magnetic resonance analyses and they were mixed with new DMP and glycols in various ratios to form unsaturated polyesters. The polymerization progressed successfully for all mixing ratios of the recovered and new DMP. Hardness tests on these recycled polymers indicated that the polymer made from a 1:1 mixture of recovered and new dimethyl phthalate had almost the same level of hardness as the polymers made from new materials. We also examined the formation of recycled FRP by using glass fibers and monomeric materials recovered through the present depolymerization method. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

炼油碱渣废水中硫化物去除技术的研究进展

简单介绍了炼油碱渣废水的来源及特点,综述了近年来炼油碱渣废水中硫化物的去除技术(包括沉淀技术、氧化技术、生物技术、超声波技术、电化学技术等)的研究进展。结合各技术的特点分析指出:以催化氧化为核心,以高效、经济、条件缓和为主要目标的组合工艺的优化与集成以及新型催化剂的研发,是炼油碱渣废水中硫化物去除技术的发展趋势。     

Risk from exposure to polychlorinated dibenzo-p-dioxins and dibenzofurans emitted from municipal incinerators

Incineration of wastes seems to be one of the major sources of PCDFs and PCDFs (dioxins). Their prevalence and extreme stability in the environment, bioavailability and bioaccumulation in the biota and human adipose tissues and breast milk are of much concern. 2,3,7,8-TCDD is one of the most toxic chemicals known and has been found to have teratogenic and carcinogenic activities in animals. Exposure to TCDD can result in chloracne, general weakness, drastic weight loss, hyperpigmentation of skin, hirsutism, porphyria cutanea tarda, liver damage, changes in activities of various liver enzymatic levels, abnormal lipid metabolism, abnormalities of the endocrine and immune systems, and possible teratogenic effects in humans. Moreover, chronic bioassay data indicate that TCDD is one of the most potent carcinogens known. It promotes liver and skin carcinogeneses, and is an initiator for various target organs in rodent test systems. There is only a limited number human epi-studies on carcinogenic outcome as a result of exposure to TCDD in isolated population.According to the classification system of the International Agency for Research on Cancer (IARC), the qualitative evidence for carcinogenicity of TCDD is considered to be “sufficient” in animals and “nadequate” in humans. Consequently, this chemical has been placed in IARC's 2B category. A modification of the multistage model is utilized for extrapolating high-dose, two-year animal cancer bioassay data to estimate human cancer risk for long-term, low-dose human exposure. The upper limit of incremental cancer risk is 3.3 × 10⁻⁵ for a continuous lifetime exposure to 1 pg m⁻³ of TCDD in ambient air. With the exception of 2,3,7,8-TCDD and a mixture of 1,2,3,6,7,8- and 1,2,3,7,8,9-HxCDDs, the chronic toxicity data on the rest of the 75 PCDD and 135 PCDF congeners are badly deficient. In the a absence of chronic bioassay data on other PCDFs and PCDFs, several TCDD equivalent approaches have been proposed for risk assessment on other congeners or mixtures. This paper compares the various approaches.     

Bioethanol from sea lettuce with the use of crude enzymes derived from waste

The mid-gut gland of the scallop contains saccharification enzymes such as cellulase and amylase, and these enzymes have been disposed of together with the mid-gut gland after the removal of the adductor muscle, an edible part of the scallop. We used a drip from the mid-gut gland of the scallop, obtained by squeezing the gland, as an inexpensive enzyme mixture and tried to produce bioethanol from the glucans present in sea lettuce by the method of simultaneous saccharification and fermentation (SSF) with the use of baker’s yeast. The ethanol concentration attained was as high as 7.2 g/L, which corresponded to ~37% of the conversion of glucans in sea lettuce in the solid-state SSF. Furthermore, we ascertained that the drip and sea lettuce contain nutrients that are indispensable for maintaining the yeast activity, and, thus, the SSF did not require any additional nutrients, such as yeast extract or peptone, the use of which increases the cost of fermentation to a high level.     

Techniques to separate metal from waste printed circuit boards from discarded personal computers

Waste printed circuit boards contain valuable metals such as Au, Pd, Ag, and Cu that can be reutilized and harmful elements such as Pb, Br, and Cr that must be removed from the viewpoint of environmental conservation. In this research, we examined a method that separates the materials from printed circuit boards contained in discarded personal computers. After cutting the printed circuit boards to a size of 20 × 20 mm, they were heated at 873 K under an Ar atmosphere to remove organic resins containing elements such as C, H, and N. After heat treatment, the printed circuit boards were crushed using a planetary ball mill and the pulverized powders were filtered. The fraction with a granularity of greater than 250 μm was separated into magnetic and nonmagnetic materials by a magnetic field. Because the fraction with a granularity of less than 250 μm contained 39 mass% of C, it was heated at 1273 K in an atmosphere of 95% Ar and 5% O₂ to allow carbon combustion to take place, followed by metal reduction processing at the same temperature in an atmosphere of 97% Ar and 3% H₂. The basicity of the resulting powder was adjusted and the powder was heated at 1773 K under an Ar atmosphere. The proposed method separated the slag and metal, and 80% of the valuable metals contained in printed circuit boards could be collected.     

Removal of ammonium and phosphates from aqueous solutions by biochar produced from agricultural waste

The concern about protecting water quantity and quality is one of the most severe challenges of the twenty-first century since the demand for water resources grows as the population and its needs grow. Additionally, and as expected, most human activities produce wastewater containing undesirable contaminants. On the other hand, the generation of agricultural waste and its inappropriate disposal causes further problems. Current wastewater treatment methods involve a combination of physical and chemical processes, technologies, and operations to remove pollutants from effluents; adsorption is an excellent example of an effective method for wastewater treatment, and biochar is currently one of the most valuable adsorbents. This review focuses on new research about applying biochar produced from agricultural waste as a low-cost and environmentally friendly method for removing ammonium and phosphates from aqueous solutions.

     

含镍废催化剂的回收利用

介绍了从含镍废催化剂中以硝酸镍形式加收镍的方法，镍回收率为70％，硝酸镍纯度为96．6％。该工艺简单，具有较好的经济效益和环境效益。     

Hybrid Composites from Waste Materials

Hybrid composites of thermoplastic biofiber reinforced with waste newspaper fiber (NF) and poplar wood flour (WF) were prepared. The weight ratio of the lignocellulosic materials to polymer was 30:70 (w:w). Polypropylene (PP) and maleic anhydride grafted polypropylene (MAPP) were also used as the polymer matrix and coupling agent, respectively. The mechanical properties, morphology and thermal properties were investigated. The obtained results showed that tensile and flexural modulus of the composites were significantly enhanced with addition of biofibers in both types (fiber and flour), as compared with pure PP. However, the increasing in WF content substantially reduced the tensile, flexural and impact modulus, but improved the thermal stability. This effect is explained by variations in fiber morphological properties and thermal degradation. Increasing fiber aspect ratio improved mechanical properties. The effect of fiber size on impact was minimal compared to the effects of fiber content. Scanning electron microscopy has shown that the composite, with coupling agent, promotes better fiber–matrix interaction. The largest improvement on the thermal stability of hybrid composites was achieved when WF was added more. In all cases, the degradation temperatures shifted to higher values after addition of MAPP. This work clearly showed that biofiber materials in both forms of fiber and flour could be effectively used as reinforcing elements in thermoplastic PP matrix.     

Methane emissions from MBT landfills

Within the scope of an investigation for the German Federal Environment Agency (“Umweltbundesamt”), the basics for the estimation of the methane emissions from the landfilling of mechanically and biologically treated waste (MBT) were developed. For this purpose, topical research including monitoring results regarding the gas balance at MBT landfills was evaluated.For waste treated to the required German standards, a methane formation potential of approximately 18–24 m³ CH₄/t of total dry solids may be expected. Monitoring results from MBT landfills show that a three-phase model with differentiated half-lives describes the degradation kinetics in the best way. This is due to the fact that during the first years of disposal, the anaerobic degradation processes still proceed relatively intensively. In addition in the long term (decades), a residual gas production at a low level is still to be expected.Most of the soils used in recultivation layer systems at German landfills show a relatively high methane oxidation capacity up to 5 l CH₄/(m² h). However, measurements at MBT disposal sites indicate that the majority of the landfill gas (in particular at non-covered areas), leaves the landfill body via preferred gas emission zones (hot spots) without significant methane oxidation. Therefore, rather low methane oxidation factors are recommended for open and temporarily covered MBT landfills. Higher methane oxidation rates can be achieved when the soil/recultivation layer is adequately designed and operated.Based on the elaborated default values, the First Order Decay (FOD) model of the IPCC Guidelines for National Greenhouse Gas Inventories, 2006, was used to estimate the methane emissions from MBT landfills. Due to the calculation made by the authors emissions in the range of 60,000–135,000 t CO_2-eq./a for all German MBT landfills can be expected. This wide range shows the uncertainties when the here used procedure and the limited available data are applied. It is therefore necessary to generate more data in the future in order to calculate more precise methane emission rates from MBT landfills. This is important for the overall calculation of the climate gas production in Germany which is required once a year by the German Government.     

Biogas production from malt bagasse from craft beer industry: kinetic modeling and process simulation

Journal of Material Cycles and Waste Management - In this work, biogas was synthesized from malt enriched-craft beer bagasse with the objective to generate clean energy. Thus, a kinetic model based...     

Evaluating the biogas potential of the dry fraction from pretreatment of food waste from households

At the waste handling company NSR, Helsingborg, Sweden, the food waste fraction of source separated municipal solid waste is pretreated to obtain a liquid fraction, which is used for biogas production, and a dry fraction, which is at present incinerated. This pretreatment and separation is performed to remove impurities, however also some of the organic material is removed. The possibility of realising the methane potential of the dry fraction through batch-wise dry anaerobic digestion was investigated. The anaerobic digestion technique used was a two-stage process consisting of a static leach bed reactor and a methane reactor. Treatment of the dry fraction alone and in a mixture with structural material was tested to investigate the effect on the porosity of the leach bed. A tracer experiment was carried out to investigate the liquid flow through the leach beds, and this method proved useful in demonstrating a more homogenous flow through the leach bed when structural material was added. Addition of structural material to the dry fraction was needed to achieve a functional digestion process. A methane yield of 98 m³/ton was obtained from the dry fraction mixed with structural material after 76 days of digestion. This was in the same range as obtained in the laboratory scale biochemical methane potential test, showing that it was possible to extract the organic content in the dry fraction in this type of dry digestion system for the production of methane.     

Bacterial Production of Polyesters from Free Fatty Acids Obtained from Natural Oils by Pseudomonas oleovorans

The carboxylic acids derived from olive oil, hazelnut oil, sesame oil and hamci(anchovy) oil were evaluated as substrates for cell growth and the production of reserve polyesters by Pseudomonas oleovorans. Poly-3-hydroxy alkanoates containing both saturated(mainly 3-hydroxy-octanoate and 3-hydroxy-decanoate) and unsaturated repeating units with 8 to 20 carbon atoms, or more, were produced in 26 to 61% yields based on cell dry weights. The number average molecular weights of these polymers varied from 45,000 to 68,000 Daltons.