Effect of fatty acids and oils on photodegradation of azadirachtin‐A

Abstract

Azadirachtin‐A on exposure to UV‐light (254 nm) as a thin film on glass surface gave a isomerised (Z)‐2‐ methylbut‐2‐enoate product. Half‐life of azadirachtin‐A as thin film under UV light was found to be 48 min. Azadirachtin ‐A was irradiated along with saturated and unsaturated fatty acids, and fatty oils under ultra‐violet light as thin film. Saturated fatty acid increased the rate of photodegradation of azadirachtin‐A, whereas unsaturated fatty acids such as oleic, linoleic and elaidic acid reduced the rate of degradation. Castor, linseed and olive oil accelerated the rate of degradation, whereas neem oil showed no or little change in the rate of degradation of azadirachtin‐A. None of these fatty acids and fatty oils were effective in controlling the rate of degradation of azadirachtin‐A under UV‐light as thin film.     

Effect of surfactants on persistence of azadirachtin-A (neem based pesticide)

Photostability of azadirachtin-A, a neem based pesticide, was studied in the presence of non-ionic surfactants. Surfactants such as Span-80, Atlox 3400B, Tween-80, Agrimul 52B, and Agrimul N4S enhanced the rate of photodegradation of azadirachtin-A, whereas surfactants such as Triton-X, Emulsol CFA, Tween-20, Emulsol MAS, and Emulsol-N-33 decreased the rate of degradation. Emulsol-N-33 was found to be the most effective surfactant, as half life of azadirachin-A in the presence of Emulsol-N-33 was found to be 94.93 min in comparison to 48 min for azadirachtin-A alone under UV light.     

Photostabilizers for azadirachtin-A (a neem-based pesticide)

Photostability of azadirachtin-A (a neem based pesticide) has been studied without and with adding stabilizers such as ter. butyl-p-cresol, 8-hydroxy quinoline and ter. butyl hydroquinone as thin film on glass surface and on leaf surface under sunlight and UV light. Half-life of azadirachtin has been found to be 48 min and 3.98 days as thin film under UV light and sunlight and 2.47 days on leaf surface, respectively. 8-Hydroxy quinoline and ter. butyl hydroquinone have been found effective in controlling degradation of azadirachtin under both sunlight and UV light with half-life of 44.42 and 35.90 days under sunlight, and 55.80 and 48.50 h under UV light, respectively. Whereas ter. butyl-p-cresol has been found effective A only under sunlight. Significant decreases in antifeedant and insect growth regulatory activity against third instar larvae of Spodopterra litura has been observed with azadirachtin when exposed to sunlight and UV light. However, by the addition of above stabilizers, the biological activity of azadirachtin-A has been retained even after 24 h of irradiation under UV light and up to 30 days of exposure to sunlight.     

Performance of photocatalytic reactors using immobilized TiO2 film for the degradation of phenol and methylene blue dye present in water stream

TiO2 thin film photocatalyst was successfully synthesized and immobilized on glass reactor tube using sol-gel method. The synthesized TiO2 coating was transparent, which enabled the penetration of ultra-violet (UV) light to the catalyst surface. Two photocatalytic reactors with different operating modes were tested: (a) tubular photocatalytic reactor with re-circulation mode and (b) batch photocatalytic reactor. A new proposed TiO2 synthesized film formulation of 1 titanium isopropoxide: 8 isopropanol: 3 acetyl acetone: 1.1 H2O: 0.05 acetic acid (in molar ratio) gave excellent photocatalytic activity for degradation of phenol and methylene blue dye present in the water. The half-life time, t1/2 of photocatalytic degradation of phenol was 56 min at the initial phenol concentration of 1000 microM in the batch reactor. In the tubular photocatalytic reactor, 5 re-circulation passes with residence time of 2.2 min (single pass) degraded 50% of 40-microM methylene blue dye. Initial phenol concentration, presence of hydrogen peroxide, presence of air bubbling and stirring speed as the process variables were studied in the batch reactor. Initial methylene blue concentration, pH value, light intensity and reaction temperature were studied as the process variables in the tubular reactor. The synthesized TiO2 thin film was characterized using SEM, XRD and EDX analysis. A comparative performance between the synthesized TiO2 thin film and commercial TiO2 particles (99% anatase) was evaluated under the same experimental conditions. The TiO2 film was equally active as the TiO2 powder catalyst.     

Extractable soil lipids and microbial activity as affected by Bt and non Bt maize grown on a silty clay loam soil

Pyrolysis-gas (Py-GC) chromatography was used to characterize extractable lipids from Bt and non-Bt maize shoots and soils collected at time of harvesting. Py-GC-MS (mass spectrometry) showed that the concentrations of total alkenes identified in non-Bt shoots and soils were 47.9 and 21.3% higher than in Bt maize shoots and soils, respectively. N-alkanes identified were of similar orders of magnitude in Bt and non-Bt maize shoots, but were 28.6% higher in Bt than in non-Bt soils. Bt maize shoots contained 29.7% more n-fatty acids than non-Bt maize shoots, whereas the concentrations of n-fatty acids in Bt soils were twice as high as those in non-Bt soils. Concentrations of unsaturated fatty acids in Bt maize shoots were 22.1% higher than those in non-Bt maize shoots, while concentrations of unsaturated fatty acids were 22.5% higher in non-Bt than in Bt soils. The cumulative CO2-C evolved from soils under Bt and non-Bt crops was 30.5% lower under Bt as compared to non-Bt crops, whereas when maize shoots were added to Bt and non-Bt soils, the decrease in CO2-C evolved were 16.5 and 23.6%, respectively. Our data showed that the cultivation of Bt maize significantly increased the saturated to unsaturated lipid ratios in soils which appeared to negatively affect microbial activity.     

Treatment of oil spill by sorption technique using fatty acid grafted sawdust

Treatment of oil spills remains a challenge to environmental scientists and technologists. Among all the existing techniques used for oil treatment, sorption is a popular technique because it is cheap, simple and effective. Among the various sorbents used, sawdust appears to be the most attractive material in terms of cost, versatility and abundance. In the present work, the efficacy of surface modification of sawdust by fatty acids (oleic acid, stearic acid and decanoic acid) and vegetable oils (castor oil or mustard oil) is demonstrated. Sorption of seawater contaminated with crude oil and also weathered oil was greatly enhanced by the surface modification. The results show that oleic acid grafted sawdust (OGSD) has the best sorption capacity for crude oil as well as weathered oil.     

固定化催化剂TiO2膜光催化降解三氯乙醛的研究

研究了负载于玻璃上的固定化催化剂TiO2膜光催化降解水中三氯乙醛的效果,探讨了TiO2膜光催化降解三氯乙醛的机理,考察了溶液pH值和三氯乙醛初始浓度埘TiO2膜光催化降解三氯乙醛的影响,并研究了固定化催化剂TiO2膜光催化降解三氯乙醛的动力学.结果表明,固定化催化剂TiO2膜光催化降解水中三氯乙醛的效果良好,当三氯乙醛初始浓度为2.25 mg/L时,在紫外光照时间3 h下,三氯乙醛的降解率高达100%.在相司紫外光照时间下,三氯乙醛的光催化降解率随着三氯乙醛初始浓度的增大而下降.在溶液pH=6.5时,三氯乙醛的降解效率最高.固定化催化剂TiO2膜光催化降解三氯乙醛的反应遵循一级反应动力学,反应速率常数随三氯乙醛初始浓度的增大而减小.     

Influence of n-alkanes and petroleum on fatty acid composition of a hydrocarbonoclastic bacterium: Marinobacter hydrocarbonoclasticus strain 617

This study concerns the effects of various long-chain n-alkanes, n-alkane mixtures and Arabian Light crude oil on the fatty acid (FA) composition of a sedimentary marine bacteria (Marinobacter hydrocarbonoclasticus strain 617), growing under aerobic conditions. The cultures with n-alkanes, as compared with soluble carbon sources, led to greater amounts of saturated and methyl branched FA (mainly belonging to a delta10 series). We observed the appearance or increase of saturated and unsaturated FA with the same carbon chain length (CCL) as the n-alkane carbon source (maximum for n-alkane CCL corresponding to the 'range' of the de novo synthesized fatty acids). We also observed a strong control of the oddness/evenness of the CCL of the FA by the oddness/evenness of the n-alkane. A n-alkane utilization index, (saturated + branched)/monounsaturated fatty acids (SAFA + BFA/MUFA) enabled discriminating between soluble carbon sources and hydrocarbons.     

Study on preparation method of <Emphasis Type="Italic">Zanthoxylum bungeanum</Emphasis> seeds kernel oil with zero trans-fatty acids

The seed of Zanthoxylum bungeanum (Z. bungeanum) is a by-product of pepper production and rich in unsaturated fatty acid, cellulose, and protein. The seed oil obtained from traditional producing process by squeezing or extracting would be bad quality and could not be used as edible oil. In this paper, a new preparation method of Z. bungeanum seed kernel oil (ZSKO) was developed by comparing the advantages and disadvantages of alkali saponification-cold squeezing, alkali saponification-solvent extraction, and alkali saponification-supercritical fluid extraction with carbon dioxide (SFE-CO₂). The results showed that the alkali saponification-cold squeezing could be the optimal preparation method of ZSKO, which contained the following steps: Z. bungeanum seed was pretreated by alkali saponification under the conditions of adding 10 %NaOH (w/w), solution temperature was 80 °C, and saponification reaction time was 45 min, and pretreated seed was separated by filtering, water washing, and overnight drying at 50 °C, then repeated squeezing was taken until no oil generated at 60 °C with 15 % moisture content, and ZSKO was attained finally using centrifuge. The produced ZSKO contained more than 90 % unsaturated fatty acids and no trans-fatty acids and be testified as a good edible oil with low-value level of acid and peroxide. It was demonstrated that the alkali saponification-cold squeezing process could be scaled up and applied to industrialized production of ZSKO.     

Influence of special surfactants on the microbial degradation of mineral oils

Various surfactants belonging to the group of fatty acid-acylated amino acids were tested for their ability to accelerate the microbial degradation of mineral oil. Of the lauric acid-acylated amino acids, aliphatic acids and histidine were found to be the most suitable. By the aid of these compounds additional 20-60% of a residual oil fraction could be degraded. The longer the chain of the fatty acid moiety, the more effective the surfactants are. Natural L-amino acids were more effective than their D-configuration. Since the special surfactants are easily biologically degradable, multiple replenishment is required in long-term experiments. The faster, more complete degradation of mineral oil is caused solely by interfacial activity; the growth of biomass due to the function of surfactants as substrate had no effect.     

Photoelectrocatalytic degradation of 4-chlorophenol and oxalic acid on titanium dioxide electrodes

Photocatalytically active thin TiO(2) films were produced by spin-coating or dip-coating an alkoxy precursor onto a transparent conducting electrode substrate and by thermal oxidation of titanium metal. The thin films were used to study the photoelectrocatalytic or photoelectrochemical degradation of oxalic acid and 4-chlorophenol (4-CP) under near UV (monochromatic, 365 nm) light irradiation. Degradation was monitored by a variety of methods. In the course of oxalic acid degradation, CO(2) formation accounted for up to 100% of the total organic carbon degradation for medium starting concentrations; for the degradation of 4-CP, less CO(2) was detected due to the higher number of oxidation steps, i.e. intermediates. Incident-photon-to-current conversion efficiency, educt degradation and product formation as well as Faradaic efficiencies were calculated for the degradation experiments. Quantum yields and Faradaic efficiencies were found to be strongly dependent on concentration, with maximum values (quantum yield) around 1 for the highest concentrations of oxalic acid.     

Petroleum Pollutant Degradation by Surface Water Microorganisms (8 pp)

Background, Aims and Scope It is well known that the composition of petroleum or some of its processing products changes in the environment mostly under the influence of microorganisms. A series of experiments was conducted in order to define the optimum conditions for an efficient biodegradation of petroleum pollutant, or bioremediation of different segments of the environment. The aim of these investigations was to show to what extent the hydrocarbons of a petroleum pollutant are degraded by microbial cultures which were isolated as dominant microorganisms from a surface water of a wastewater canal of an oil refinery and a nitrogen plant. Biodegradation experiments were conducted on one paraffinic, and one naphthenic type of petroleum during a three month period under aerobic conditions, varying the following parameters: Inorganic (Kp) or an organic medium (Bh) with or without exposition to light. Methods Microorganisms were analyzed in a surface water sample from a canal (Pančevo, Serbia), into which wastewater from an oil refinery and a nitrogen plant is released. The consortia of microorganisms were isolated from the water sample (most abundant species: Phormidium foveolarum - filamentous Cyanobacteria, blue-green algae and Achanthes minutissima, diatoms, algae). The simulation experiments of biodegradation were conducted with the biomass suspension and crude oils Sirakovo (Sir, paraffinic type) and Velebit (Ve, naphthenic type). After a three month period, organic substance was extracted by means of chloroform. In the extracts, the content of saturated hydrocarbons, aromatic hydrocarbons, alcohols and fatty acids was determined (the group composition). n-Alkanes and isoprenoid aliphatic alkanes, pristane and phytane, in the aliphatic fractions, were analyzed using gas chromatography (GC). Total isoprenoid aliphatic alkanes and polycyclic alkanes of sterane and triterpane types were analyzed by GC-MS. Results and discussion. Paraffinic type petroleums have a significant loss of saturated hydrocarbons. For naphthenic type petroleum, such a trend has not been observed. The most intensive degradation of n-alkanes and isoprenoid aliphatic alkanes (in paraffinic oil) and isoprenoids (in naphthenic oil) was observed using the inorganic medium Kp in the light; the microbial conversion is somewhat lower with Kp in the dark; with organic medium Bh in the light the degradation is of low intensity; with the same medium in the dark the degradation is hardly to be seen. Steranes and triterpanes were not affected by microbial degradation under the conditions used in our experiments. Obviously, the petroleum biodegradation was restricted to the acyclic aliphatics (n-alkanes and isoprenoids). Conclusion Phormidium foveolarum (filamentous Cyanobacteria - blue-green algae) and Achanthes minutissima (diatoms, algae), microbial cultures isolated as dominant algae from a surface water in a wastewater canal of an oil refinery and a nitrogen plant, have degradable effects dominantly involving petroleum hydocarbons. Petroleum microbiological degradation is more intensive when inorganic medium (in the light) is applied. Having in mind that the inorganic pollutants have been released into the canal as well, this medium reflects more the natural environmental conditions. Polycyclic alkanes of sterane and triterpane type, in spite of the fact that these compounds could be degraded, have remained unchanged regarding abundance and distribution. Since this is the case even for naphthenic type petroleum (which is depleted in n-alkanes), it can be concluded that the biodegradation of petroleum type pollutants, under natural conditions, will be restrained to the n-alkane and isoprenoid degradation. Recommendation and Outlook Performed experiments and simulations of petroleum microbiological degradation may serve for the prediction of the fate of petroleum type pollutants, as well as for definition of conditions for bioremediation of some environmental segments.     

Lubricants based on renewable resources--an environmentally compatible alternative to mineral oil products

The development of lubricants like, e.g. engine and hydraulic oils was traditionally based on mineral oil as a base fluid. This fact is related to the good technical properties and the reasonable price of mineral oils. The Report to the Club of Rome (W.W. Behrens III, D.H. Meadows, D.I. Meadows, J. Randers, The limits of growth, A Report to the Club of Rome, 1972) and the two oil crises of 1979 and 1983, however, elucidated that mineral oil is on principle a limited resource. In addition, environmental problems associated with the production and use of chemicals and the limited capacity of nature to tolerate pollution became obvious (G.H. Brundtland, et al., in: Hauff, Volker (Ed.), World Commission on Environment and Development (WCED), Report of the Brundtland-Commission, Oxford, UK, 1987), and the critical discussion included besides acid rain, smog, heavy metals, and pesticides also mineral oil (especially oil spills like the case Exxon Valdes). A disadvantage of mineral oil is its poor biodegradability and thus its potential for long-term pollution of the environment. From the early development of lubricants for special applications (e.g. turbojet engine oils) it was known, that fatty acid polyol esters have comparable or even better technical properties than mineral oil. Subsequently, innumerable synthetic esters have been synthesized by systematic variation of the fatty acid and the alcohol components. Whereas the alcohol moiety of the synthetic esters are usually of petrochemical origin, the fatty acids are almost exclusively based on renewable resources. The physico-chemical properties of oleochemical esters can cover the complete spectrum of technical requirements for the development of high-performance industrial oils and lubricants (e.g. excellent lubricating properties, good heat stability, high viscosity index, low volatility and superior shear stability). For a comprehensive review of their technical properties see F. Bongardt, in: Jahrbuchfür Praktiker, H. Ziolkowsky (Ed.), Verlag für chemische Industrie GmbH, 1996, pp. 348-361. This article will focus on the ecological properties of oleochemical (synthetic) esters. The environmental relevance of oleochemicals in comparison to petrochemicals is discussed, and then the principles of an ecological assessment are described. The ecotoxicological properties and the biodegradability of oleochemical esters are presented. Finally, the ecological properties of the oleochemical esters are discussed with regard to existing environmental classification and labeling systems.     

纳米生态建筑涂料光催化降解甲醛的研究

以掺加纳米TiO2制备的光催化建筑涂料为催化剂,研究了在紫外光照条件下对气态甲醛的催化降解,并探讨了纳米催化剂晶型、用量和吸附量对光催化降解甲醛的影响。实验结果表明,锐钛型纳米TiO2具有较高的光催化降解甲醛的活性,1h甲醛的降解率可达到70％左右,产物主要为二氧化碳和水;光催化降解甲醛受到涂膜上吸附量的较大影响;该涂料对甲醛的光催化降解反应表现出一级动力学速率规律,且具有良好的线性关系。     

Fatty acids composition of Caenorhabditis elegans using accurate mass GCMS-QTOF

The free living nematode Caenorhabditis elegans is a proven model organism for lipid metabolism research. Total lipids of C. elegans were extracted using chloroform and methanol in 2:1 ratio (v/v). Fatty acids composition of the extracted total lipids was converted to their corresponding fatty acids methyl esters (FAMEs) and analyzed by gas chromatography/accurate mass quadrupole time of flight mass spectrometry using both electron ionization and chemical ionization techniques. Twenty-eight fatty acids consisting of 12 to 22 carbon atoms were identified, 65% of them were unsaturated. Fatty acids containing 12 to17 carbons were mostly saturated with stearic acid (18:0) as the major constituent. Several branched-chain fatty acids were identified. Methyl-14-methylhexadecanoate (iso- 17:0) was the major identified branched fatty acid. This is the first report to detect the intact molecular parent ions of the identified fatty acids in C. elegans using chemical ionization compared to electron ionization which produced fragmentations of the FAMEs.     

3种短链脂肪酸对活性污泥储存PHA的影响

采用经乙酸钠驯化培养具有一定聚羟基烷酸酯(PHA)储存能力的活性污泥,考察乙酸、丙酸和丁酸3种短链脂肪酸,以及乙酸、丁酸分别与丙酸按1∶1、1∶2、2∶1比例组合成的6种混合酸作为碳源时对活性污泥中PHA的储存和转化的影响。实验结果表明,在3种短链脂肪酸中,以丁酸为碳源得到活性污泥PHA储存量最高,为40.53 mg/g;在混合酸中,乙酸与丙酸按1∶2组合时,系统PHA储存量最高,为773.4 mg/g。混合酸相对于单一的脂肪酸碳源更有利于活性污泥储存PHA。在混合酸总量一定的条件下,随着丙酸比例的增加,乙酸与丙酸混合比丁酸与丙酸混合更有利于微生物的PHA储存。     

TiO2膜光催化降解4，4’-二溴联苯的研究

研究了负载于玻璃上的固定化催化剂TiO2膜光催化降解水中4,4’-二溴联苯（4,4’-DBB）的效果,考察了溶液pH值和4,4’-DBB初始浓度等对TiO2膜光催化降解4,4’-DBB的影响,探讨了降解机理。结果表明,TiO2膜光催化降解水中4,4’-DBB的效果良好,紫外光照射8h,初始浓度为4mg／L的4,4’-DBB的降解率高达94％,降解速率随着4,4’-DBB初始浓度的增大而下降。在溶液pH：1时,4,4’-DBB的降解效率最高。超声的加入使降解反应的速率加快。经拟合发现4,4’-DBB的降解符合拟一级反应规律,并推导出动力学方程。     

Polymers and surfactants on the basis of renewable resources

A new strategy for the preparation of different polymers and special surfactants was developed. First, unsaturated fatty acid methyl esters obtained from plant oils were converted to terminally unsaturated esters and alpha-olefins by metathesis with ethylene using heterogeneous rhenium or homogeneous ruthenium catalysts. These esters were directly copolymerized with ethylene by an insertion-type palladium-catalyzed polymerization to functionalized polyolefins. Polyesters were synthesized by metathetical dimerization of omega-unsaturated esters and subsequent polycondensation of the produced internally unsaturated dicarboxylic esters or by acidic transesterification with petrochemical diols and additional acyclic diene metathesis polymerization. Omega-epoxy fatty acid methyl esters, achieved by a new method of chemo-enzymatic epoxidation, were converted into polyethers with comb-structure catalyzed by aluminoxanes on the one hand and into sugar surfactants by nucleophilic ring-opening with amino carbohydrates on the other hand.     

Fatty acid profile and elemental content of avocado (Persea americana Mill.) oil--effect of extraction methods

Interest in vegetable oil extracted from idioblast cells of avocado fruit is growing. In this study, five extraction methods to produce avocado oil have been compared: traditional solvent extraction using a Soxhlet or ultrasound, Soxhlet extraction combined with microwave or ultra-turrax treatment and supercritical fluid extraction (SFE). Traditional Soxhlet extraction produced the most reproducible results, 64.76 ± 0.24 g oil/100 g dry weight (DW) and 63.67 ± 0.20 g oil/100 g DW for Hass and Fuerte varieties, respectively. Microwave extraction gave the highest yield of oil (69.94%) from the Hass variety. Oils from microwave extraction had the highest fatty acid content; oils from SFE had wider range of fatty acids. Oils from Fuerte variety had a higher monounsaturated: saturated FA ratio (3.45-3.70). SFE and microwave extraction produced the best quality oil, better than traditional Soxhlet extraction, with the least amount of oxidizing metals present.     

Effect of decabromodiphenyl ether and antimony trioxide on controlled pyrolysis of high-impact polystyrene mixed with polyolefins

The controlled pyrolysis of polyethylene/polypropylene/polystyrene mixed with brominated high-impact polystyrene containing decabromodiphenyl ether as a brominated flame-retardant with antimony trioxide as a synergist was performed. The effect of decabromodiphenyl ether and antimony trioxide on the formation of its congeners and their effect on distribution of pyrolysis products were investigated. The controlled pyrolysis significantly affected the decomposition behavior and the formation of products. Analysis with gas chromatograph with electron capture detector confirmed that the bromine content was rich in step 1 (oil 1) liquid products leaving less bromine content in the step 2 (oil 2) liquid products. In the presence of antimony containing samples, the major portion of bromine was observed in the form of antimony bromide and no flame-retardant species were found in oil 1. In the presence of synergist, the step 1 and step 2 oils contain both light and heavy compounds. In the absence of synergist, the heavy compounds in step 1 oil and light compounds in step 2 oils were observed. The presence of antimony bromide was confirmed in the step 1 oils but not in step 2 oils.