富氧条件下选择性还原NO的复合催化剂体系

选择性催化还原法是净化稀燃汽车尾气中NOx的最有效途径之一，单一催化组分或单一类型的催化剂很难满足实际需要，复合催化剂的研究成为必然趋势。本文介绍了复合催化体系的组合形式，回顾了国内外最近几年复合催化剂体系净化NOx的研究成果，为将来设计新的复合催化体系提出了建议。     

富氧条件下NOx催化净化的研究进展

本文对富氧条件下NOx的催化净化进行了综述与探讨,着重分析了分子筛催化剂、贵金属催化剂以及金属氧化物催化剂在碳氢化合物选择性催化还原NOx反应中的活性及其影响因素,描述了催化反应的机理,并指出了今后的研究方向.     

富氧条件下NOx催化净化的研究进展

本文对富氧条件下NOx的催化净化进行了综述与探讨，着重分析了分子筛催化剂，贵金属催化剂以及金属氧化物催化剂在碳氢化合物选择性催化还原NOx反应中的活性及其影响因素，描述了催化反应的机理，并指出了今后的研究方向。     

汽车尾气净化催化剂的研究进展

催化净化是解决汽车尾气污染的最有效途径之一,因此综述了汽车尾气净化催化剂及其载体的研究进展,并提出了汽车尾气净化催化剂的发展方向。     

固体超强酸和金属氧化物类催化剂上CH4-SCR还原NOx研究进展

由于还原剂甲烷价廉易得,甲烷选择性催化还原NOx(简称CH4-SCR)被认为是最有潜力替代NH3-SCR的催化还原技术.现有的CH4-SCR催化剂中,分子筛类催化剂因催化活性高而被广泛研究,但由于其水热稳定性不好,使得非分子筛负载的催化剂成为近年来的研究热点,其中主要包括固体超强酸和氧化物两大类.综述了这两类催化体系在催化活性、反应机理及掺杂改性等方面的研究现状,比较了各种催化剂的优缺点,并对CH4-SCR的发展前景进行了展望.     

柴油机排放碳颗粒物和NOx催化净化技术的研究进展

本文从柴油机排放的特点、柴油机排放的标准、柴油机排放碳颗粒物和NOx催化净化技术等方面进行了综述与探讨,就柴油机排放碳颗粒物和NOx催化净化技术的研究提出了一些建议和设想.     

柴油机排放碳颗粒物和NOx催化净化技术的研究进展

本文从柴油机排放的特点、柴油机排放的标准、柴油机排放碳颗粒物和NOx催化净化技术等方面进行了综述与探讨,就柴油机排放碳颗粒物和NOx催化净化技术的研究提出了一些建议和设想。     

中小型工业窑炉NOx废气的净化技术与应用

介绍了中小型工业窑炉生产过程中排放NOx的现状,并针对NOx的治理问题,从工程应用角度,简述了湿法和干法净化NOx的原理和化学反应过程。讨论了NOx排放特性和NOx废气中NO2/NOx比例的问题。提出了影响NOx治理的主要因素,包括吸收剂、吸附剂、催化剂和设备的部分应用参数,并结合工程实例指出工程需要注意的问题。介绍了多项采用湿法和干法净化NOx的工程应用项目,丰富了中小工业窑炉NOx废气的治理的实践经验,为中小工业窑炉排放NOx治理奠定了基础。     

中小型工业窑炉NO_x废气的净化技术与应用

介绍了中小型工业窑炉生产过程中排放NOx的现状,并针对NOx的治理问题,从工程应用角度,简述了湿法和干法净化NOx的原理和化学反应过程。讨论了NOx排放特性和NOx废气中NO2/NOx比例的问题。提出了影响NOx治理的主要因素,包括吸收剂、吸附剂、催化剂和设备的部分应用参数,并结合工程实例指出工程需要注意的问题。介绍了多项采用湿法和干法净化NOx的工程应用项目,丰富了中小工业窑炉NOx废气的治理的实践经验,为中小工业窑炉排放NOx治理奠定了基础。     

NiO-MgO复合金属氧化物催化分解N_2O

采用溶胶凝胶法制备了一系列不同Ni/Mg比的NiO-MgO复合氧化物催化剂,并考察了其N_2O催化分解性能。结果表明,NiO-MgO催化剂的N_2O催化分解活性明显优于单一NiO和MgO,当MgO含量为5%时,NiO-MgO复合金属氧化物上N_2O分解活性最佳。XRD、H2-TPR和XPS结果表明,Ni2+是催化分解N_2O的主要活性位点。Mg不作为活性组分,但可通过Ni、Mg之间强烈的相互作用提高催化剂氧化还原能力,进而促进N_2O的催化分解。此外,Mg的加入促进了催化剂中NiO的形成。     

Evaluation of Cu-PPHs as active catalysts for the SCR process to control NOx emissions from heavy duty diesel vehicles

Copper based catalysts supported on mesoporous materials, which were in turn based on a surfactant expanded zirconium phosphate for the formation of silica galleries in the interlayer space, were prepared by the impregnation method. They were then characterised and tested in the selective catalytic reduction of NO with ammonia as active catalysts for the control of the NOx emissions from heavy duty vehicles. Copper catalysts displayed a high catalytic performance, even in the presence of 14% (v/v) of H2O and 100 ppm of SO2. They also displayed improved catalytic behaviour when compared to a CuZSM5 catalyst.     

A review of the catalysts used in the reduction of NO by CO for gas purification

The reduction of NO by the CO produced by incomplete combustion in the flue gas can remove CO and NO simultaneously and economically. However, there are some problems and challenges in the industrial application which limit the application of this process. In this work, noble metal catalysts and transition metal catalysts used in the reduction of NO by CO in recent years are systematically reviewed, emphasizing the research progress on Ir-based catalysts and Cu-based catalysts with prospective applications. The effects of catalyst support, additives, pretreatment methods, and physicochemical properties of catalysts on catalytic activity are summarized. In addition, the effects of atmosphere conditions on the catalytic activity are discussed. Several kinds of reaction mechanisms are proposed for noble metal catalysts and transition metal catalysts. Ir-based catalysts have an excellent activity for NO reduction by CO in the presence of O₂. Cu-based bimetallic catalysts show better catalytic performance in the absence of O₂, in that the adsorption and dissociation of NO can occur on both oxygen vacancies and metal sites. Finally, the potential problems existing in the application of the reduction of NO by CO in industrial flue gas are analyzed and some promising solutions are put forward through this review.

     

The effects of manganese precursors on Mn-based/TiO2 catalysts for catalytic reduction of NO with NH3

Manganese acetate (MnAc) and manganese nitrate (MnN) were employed as precursors for the preparation of MnAc)/TiO2, Mn (N)/TiO2, Mn(Ac)-Ce/TiO2, and Mn(N)-Ce/TiO2 by impregnation. These complexes were used as catalysts in the low-temperature selective catalytic reduction of NO with NH3. The influence of manganese precursors on catalyst characteristics, the reduction activity, and the stability of the catalysts to poisoning by H2O and SO2 were studied. Experiments showed that Mn(N) produced MnO2 with large grain sizes in Mn(N)/TiO2 catalyst. On the contrary, Mn(Ac) led to highly dispersed and amorphous Mn2O3 in Mn (Ac)/TiO2 catalyst, which had better catalytic activity and stability to SO2 at low temperatures. The doping of cerium reduced the differences in catalytic performance between the catalysts derived from different Mn precursors.     

Effects of NO2 and SO2 on selective catalytic reduction of nitrogen oxides by ammonia

The selective catalytic reduction (SCR) characteristics of NO and NO(2) over V(2)O(5)-WO(3)-MnO(2)/TiO(2) catalyst using ammonia as a reducing agent have been determined in a fixed-bed reactor at 200-400 degrees C. The presence of NO(2) enhances the SCR activity at lower temperatures and the optimum ratio of NO(2)/NO(x) is found to be 0.5. During the SCR reactions, there are some side reactions occurred such as ammonia oxidation and N(2)O formation. At higher temperatures, the selective catalytic oxidation of ammonia and the nitrous oxide formation compete with the SCR reactions. The denitrification (DeNO(x)) conversion decreases at lower temperatures but it increases at higher temperatures with increasing SO(2) concentration. The presence of SO(2) in the feeds inhibits N(2)O formation.     

铜铈掺杂六铝酸盐的脱硝性能

用共沉淀法制备用于脱除NO的六铝酸盐催化剂LaMxAl12-xO19(M =Cu,Ce,CuCe).用XRD、H2-TPR和BET对催化剂进行了结构和物性表征.用微型催化反应装置考察了催化剂在CO选择性催化还原NO中的活性.结果表明,Cu离子易于进入六铝酸盐晶格内,形成完整的六铝酸盐结构.Ce离子不易于进入六铝酸盐晶格内,主要以CeO2的形式存在.在CO+ NO条件下,3种催化剂都表现出较好的脱硝活性,LaCuCeAl10O19中由于Cu离子与Ce离子间产生协同作用,该催化剂的脱硝活性有所增加.加入SO2后,3种催化剂都有不同程度的失活现象发生,其中LaCuAl11O19催化剂受SO2中毒影响最严重,LaCuCeAl10O19催化剂的脱硝活性在三者中最好.     

Effects of acid treatments of activated carbon on its physiochemical structure as a support for copper oxide in DeSO(2) reaction catalysts

To enhance the dispersion of active sites, modification of the AC supports with different acid solution might result in various surface oxygen groups which act as anchoring sites for metallic precursor to stay and improve the reactivity between AC supports and copper precursor. In the present work, the AC support is tailored with HCl and HNO(3), respectively. The pore structure, surface oxygen groups of the AC support and catalysts as well as catalyst dispersion before and after acid treatments are systematically studied by BET, pH(slurry), TPD, and XRPD analyses. It is found that the order of activity in DeSO(2) reaction is as follows: Cu/AC-HCl>Cu/AC>Cu/AC-HNO(3). The same sequence is also observed for the pore structure of AC supports, the catalyst dispersion, but not for the amounts of CO(2) evolving during TPD experiments of supports. The key role of acid treatment on carbon surface chemistry and pore structure, which are closely related to catalyst dispersion and adsorption capacity, is examined to rationalize these findings. Furthermore, under the NO/NH(3)=1 the NO could be selective catalytic reduction with NH(3) in the presence of O(2), which catalyzed by fresh and spent AC-supported catalyst.     

Cobalt-based alumina pillared zirconium phosphate catalysts for the selective catalytic reduction of NO by propane

A series of cobalt containing alumina pillared zirconium phosphate materials have been prepared by ion exchange or by impregnation, and fully characterised. The catalytic behaviour of these materials in the selective catalytic reduction of NO by propane, in excess of oxygen, at temperatures ranging between 350 and 550 degrees C, has been also evaluated. A maximum NO conversion close to 14% is obtained on Co-impregnated catalysts heated at 600 degrees C. The NO reduction seems to be related to the presence of Co3+, thus the calcination temperature of samples influences the resulting activity much more than the cobalt content.     

Superior pillared clay catalysts for selective catalytic reduction of nitrogen oxides for power plant emission control

Fe(3+)-, Cr(3+)-, Cu(2+)-, Mn(2+)-, Co(2+)-, and Ni(2+)-exchanged Al2O3-pillared interlayer clay (PILC) or TiO2-PILC catalysts are investigated for the selective catalytic reduction (SCR) of nitric oxide by ammonia in the presence of excess oxygen. Fe(3+)-exchanged pillared clay is found to be the most active. The catalytic activity of Fe-TiO2-PILC could be further improved by the addition of a small amount of cerium ions or cerium oxide. H2O and SO2 increase both the activity and the product selectivity to N2. The maximum activity on the Ce-Fe-TiO2-PILC is more than 3 times as active as that on a vanadium catalyst. Moreover, compared to the V2O5-WO3/TiO2 catalyst, the Fe-TiO2-PILC catalysts show higher N2/N2O product selectivities and substantially lower activities (by approximately 85%) for SO2 oxidation to SO3 under the same reaction conditions. A 100-hr run in the presence of H2O and SO2 for the CeO2/Fe-TiO2-PILC catalyst showed no decrease in activity.     

Ti-Ce-Zr-Ox复合脱硝催化剂的制备及其性能研究

采用共混法制备了Ti-Ce-Zr-Ox复合脱硝催化剂TiCe0.1Zr0.1O2.4,运用X射线衍射、氮气物理吸附、扫描电镜等表征手段,分别对该催化剂的晶型、表面积、孔分布及结构形貌进行了分析,同时考察了反应温度、空速、水蒸气和SO2对该催化剂NH3选择性催化还原NO的影响.结果表明,TiCe0.1Zr0.1O2.4催...