Distribution of PCNs, PCBs, and other POPs together with soot and other organic matter in the marine environment of the Grenlandsfjords, Norway

The apparently dissolved concentration of polychlorinated naphthalenes (PCNs) and three planar polychlorinated biphenyls (pPCBs) were sampled and analysed in the water column of a marine fjord system. We also measured how much of these persistent organic pollutants (POPs) were associated with suspended particles. The field observations showed that an unexpectedly high portion of the pollutants were particle-associated. The factor of deviation from model predictions had positive linear regression on the soot carbon:particulate organic carbon ratio of the particles, and on estimates of the soot-water distribution coefficient for the PCNs. The spatial distribution of surface sediment concentrations of PCNs and polycyclic aromatic hydrocarbons (PAH) were found to consistently follow the sediment content of soot (f(SC)) to a larger extent than the bulk organic matter (f(OC)). There were no systematic differences in the strength of correlation of sediments concentrations of other POPs, i.e. octachlorostyrene and organochlorine pesticides with sediment concentration to f(SC) and f(OC). Mechanisms possible of generating these types of observations, e.g. adsorption to soot carbon in the marine particle, are discussed.     

粘土矿物材料吸附去除水中痕量邻苯二甲酸酯

研究了天然沸石、2种有机改性沸石及Mg/Al水滑石对水中痕量邻苯二甲酸二甲酯、邻苯二甲酸二(2-乙基己基)酯和邻苯二甲酸二辛酯的等温吸附情况和吸附机理,并与活性炭的吸附性能进行了比较。结果表明,Freundlich和Langmuir吸附等温方程均可以很好地描述天然沸石和Mg/Al水滑石对邻苯二甲酸酯的吸附,2种有机改性沸石对邻苯二甲酸酯的吸附更符合Linear吸附等温方程。与活性炭相比,天然沸石对邻苯二甲酸酯的吸附效果较差;2种有机改性沸石和Mg/Al水滑石对分子尺寸较小的邻苯二甲酸酯物质邻苯二甲酸二甲酯的去除率较低,分别低31.8%、31.4%和19.8%,但对分子较大的邻苯二甲酸酯物质邻苯二甲酸二(2-乙基己基)酯和邻苯二甲酸二辛酯的去除效果相差不大。     

The interactions of phthalate esters with suspended particulate material in fresh and marine waters

The behaviour of six phthalate esters in the presence of particulate material suspended in fresh and saline water has been examined. The adsorption of all phthalates by the particulates is enhanced by the presence of salt. The adsorption process is fairly rapid ( <2-3 h) and the degree of adsorption depends on the characteristics of the particulates. Di-ethylhexyl phthalate is adsorbed most actively by material of a small particle size. The adsorption of other phthalates is more strongly influenced by the chemical composition of the particulates and is most closely correlated with their lipid content.     

Removal mechanisms and fate of insecticides in constructed wetlands

Constructed wetlands (CWs), along with other vegetative systems, are increasingly being promoted as a mitigation practice to treat non-point source runoff to reduce contaminants such as pesticides. However, studies so far have mostly focused on demonstrating contaminant removal efficiency. In this study, using two operational CWs located in the Central Valley of California, we explored the mechanisms underlying the removal of pyrethroids and chlorpyrifos from agricultural runoff water, and further evaluated the likelihood for the retained pesticides to accumulate within the CWs over time.In the runoff water passing through the CWs, pyrethroids were associated overwhelmingly with suspended solids >0.7 μm, and the sorbed fraction accounted for 38-100% of the total concentrations. The derived K_d values for the suspended solids were in the order of 10⁴-10⁵, substantially greater than those reported for bulk soils and sediments. Distribution of pyrethroids in the wetland sediments was found to mimic organic carbon distribution, and was enriched in large particles that were partially decomposed plant materials, and clay-size particles (<2 μm). Retention of suspended particles, especially the very large particles (>250 μm) and the very fine particles, is thus essential in removing pyrethroids and chlorpyrifos in CWs. Under flooded and anaerobic conditions, most pyrethroids and chlorpyrifos showed moderate persistence, with DT₅₀ values between 106-353 d. However, the retained pyrethroids were very stable in dry and aerobic sediments between irrigation seasons, suggesting a possibility for accumulation over time. Therefore, the long-term ecological risks of CWs should be further understood before their wide adoption.     

Impact of carbon,oxygen and sulfur content of microscale zerovalent iron particles on its reactivity towards chlorinated aliphatic hydrocarbons

Zerovalent iron (ZVI) abiotically degrades several chlorinated aliphatic hydrocarbons (CAHs) via reductive dechlorination, which offers perspectives for in situ groundwater remediation applications. The difference in reactivity between ZVI particles is often linked with their specific surface area. However, other parameters may influence the reactivity as well. Earlier, we reported for a set of microscale zerovalent iron (mZVI) particles the disappearance kinetic of different CAHs which were collected under consistent experimental conditions. In the present study, these kinetic data were correlated with the carbon, oxygen and sulfur content of mZVI particles. It was confirmed that not only the specific surface area affects the disappearance kinetic of CAHs, but also the chemical composition of the mZVI particles. The chemical composition, in addition, influences CAHs removal mechanism inducing sorption onto mZVI particles instead of dechlorination. Generally, high disappearance kinetic of CAHs was observed for particles containing less oxygen. A high carbon content, on the other hand, induced nonreactive sorption of the contaminants on the mZVI particles. To obtain efficient remediation of CAHs by mZVI particles, this study suggested that the carbon and oxygen content should not exceed 0.5% and 1% respectively. Finally, the efficiency of the mZVI particles may be improved to some extent by enriching them with sulfur. However, the impact of sulfur content on the reactivity of mZVI particles is less pronounced than that of the carbon and oxygen content.     

Preliminary toxicological assessment of phthalate esters from drinking water consumed in Portugal

This paper reports, for the first time, the concentrations of selected phthalates in drinking water consumed in Portugal. The use of bottled water in Portugal has increased in recent years. The main material for bottles is polyethylene terephthalate (PET). Its plasticizer components can contaminate water by leaching, and several scientific studies have evidenced potential health risks of phthalates to humans of all ages. With water being one of the most essential elements to human health and because it is consumed by ingestion, the evaluation of drinking water quality, with respect to phthalate contents, is important. This study tested seven commercial brands of bottled water consumed in Portugal, six PET and one glass (the most consumed) bottled water. Furthermore, tap water from Lisbon and three small neighbor cities was analyzed. Phthalates (di-n-butyl phthalate ester (DnBP), bis(2-ethylhexyl) phthalate ester (DEHP), and di-i-butyl phthalate ester (DIBP)) in water samples were quantified (PET and glass) by means of direct immersion solid-phase microextraction and ionic liquid gas chromatography associated with flame ionization detection or mass spectrometry due to their high boiling points and water solubility. The method utilized in this study showed a linear range for target phthalates between 0.02 and 6.5 μg L^?1, good precision and low limits of detection that were between 0.01 and 0.06 μg L^?1, and quantitation between 0.04 and 0.19 μg L^?1. Only three phthalates were detected in Portuguese drinking waters: dibutyl (DnBP), diisobutyl (DIBP), and di(ethylhexyl) phthalate (DEHP). Concentrations ranged between 0.06 and 6.5 μg L^?1 for DnBP, between 0.02 and 0.16 μg L^?1 for DEHP, and between 0.1 and 1.89 μg L^?1 for DIBP. The concentration of DEHP was found to be up to five times higher in PET than in glass bottled water. Surprisingly, all the three phthalates were detected in glass bottled water with the amount of DnBP being higher (6.5 μg L^?1) than in PET bottled water. These concentrations do not represent direct risk to human health. Regarding potable tap water, only DIBP and DEHP were detected. Two of the cities showed concentration of all three phthalates in their water below the limits of detection of the method. All the samples showed phthalate concentrations below 6 μg L^?1, the maximum admissible concentration in water established by the US Environmental Protection Agency. The concentrations measured in Portuguese bottled waters do not represent any risk for adult's health.     

Comparison of nonideal sorption formulations in modeling the transport of phthalate esters through packed soil columns

Sorption of dimethyl phthalate (DMP), diethyl phthalate (DEP) and dipropyl phthalate (DPP) to two soil materials that vary in organic matter content was investigated using miscible displacement experiments under saturated flow conditions. Generated breakthrough curves (BTCs) were inversely simulated using linear, equilibrium sorption (LE), nonlinear, equilibrium sorption (NL), linear, first-order nonequilibrium sorption (LFO), linear, radial diffusion (LRD), and nonlinear, first-order nonequilibrium sorption (NFO) models. The Akaike information criterion was utilized to determine the preferred model. The LE model could not adequately describe phthalate ester (PE) BTCs in higher organic matter soil or for more hydrophobic PEs. The LFO and LRD models adequately described the BTCs but a slight improvement in curve-fitting was gained in some cases when the NFO model was used. However, none of the models could properly describe the desorptive tail of DPP for the high organic matter soil. Transport of DPP through this soil was adequately predicted when degradation or sorption hysteresis was considered. Using the optimized parameter values along with values reported by others it was shown that the organic carbon distribution coefficient (K(oc)) of PEs correlates well with the octanol/water partition coefficient (K(ow)). Also, a strong relationship was found between the first-order sorption rate coefficient normalized to injection pulse size and compound residence time. A similar trend of timescale dependence was found for the rate parameter in the radial diffusion model. Results also revealed that the fraction of instantaneous sorption sites is dependent on K(ow) and appears to decrease with the increase in the sorption rate parameter.     

Chapter one: exposure measurements

Determining human exposure to suspended particulate concentrations requires measurements that quantify different particle properties in microenvironments where people live, work, and play. Particle mass, size, and chemical composition are important exposure variables, and these are typically measured with time-integrated samples on filters that are later submitted to laboratory analyses. This requires substantial sample handling, quality assurance, and data reduction. Newer technologies are being developed that allow in-situ, time-resolved measurements for mass, carbon, sulfate, nitrate, particle size, and other variables. These are large measurement systems that are more suitable for fixed monitoring sites than for personal applications. Human exposure studies need to be designed to accomplish specific objectives rather than to serve too many purposes. Resources need to be divided among study design, field sampling, laboratory analysis, quality assurance, data management, and data analysis phases. Many exposure projects allocated too little to the non-measurement activities.     

Field Reliability of the Orsat Analyzer

Results from four field based collaborative tests and from one laboratory based collaborative test of the Orsat analytical procedure are discussed. The results from the five collaborative tests demonstrate that routinely using Orsat data to convert particulate emissions from combustion sources to the reference conditions of 50 % excess air and 12% carbon dioxide may introduce sizeable errors in the corrected particulate loading. Ways to improve the Orsat apparatus and increase the reliability of the data are suggested.

Also reported are the results from field and laboratory studies on the reliability of using individual carbon dioxide and oxygen analyzers of the Fyrite* type to determine stack gas molecular weight. The laboratory study, which was done using three cylinders containing mixtures of carbon dioxide, oxygen, carbon monoxide, and nitrogen of known concentration, determined that these analyzers give carbon dioxide and oxygen analyses of sufficient reliability to yield accurate molecular weights. The results of the field studies, which were done on actual flue gas samples, also support this conclusion.     

Occurrence of phthalates in sediment and biota: relationship to aquatic factors and the biota-sediment accumulation factor

Phthalate compounds in sediments and fishes were investigated in 17 Taiwan's rivers to determine the relationships between phthalate levels in sediment and aquatic factors, and biota-sediment accumulation factor (BSAF) for phthalates. Mean concentrations (range) of di(2-ethylhexyl) phthalate (DEHP), butyl benzyl phthalate (BBzP) and di-n-butyl phthalate (DBP) in sediment at low-flow season were 4.1 (<0.05-46.5), 0.22 (<0.05-3.1) and 0.14 (<0.05-1.3)mgkg(-1)dw; those at high-flow season were 1.2 (<0.05-13.1), 0.13 (<0.05-0.27) and 0.09 (<0.05-0.22)mgkg(-1)dw, respectively. Trace levels of dimethyl phthalate (DMP), diethyl phthalate (DEP) and di-n-octyl phthalate (DOP) in sediment were found in both seasons. Concentrations of DEHP in sediments were significantly affected by temperature, suspended solids, ammonia-nitrogen, and chemical oxygen demand. The highest concentration of DEHP in fish samples were found in Liza subviridis (253.9mgkg(-1)dw) and Oreochromis miloticus niloticus (129.5mgkg(-1)dw). BSAF of DEHP in L. subviridis (13.8-40.9) and O. miloticus niloticus (2.4-28.5) were higher than those in other fish species, indicating that the living habits of fish and physical-chemical properties of phthalates, like logKow, may influence the bioavailability of phthalates in fish. Our data suggested that DEHP level in river sediments were influenced by water quality parameters due to their effects on the biodegradation processes, and that the DEHP level in fish was affected by fish habitat and physiochemical properties of polluted contaminants.     

Mg/Al水滑石对水中痕量邻苯二甲酸酯的吸附动力学和热力学

研究了Mg／A1水滑石对水中痕量邻苯二甲酸二甲酯（DMP）、邻苯二甲酸二（2一乙基己基）酯（DEHP）和邻苯二甲酸二辛酯（DnOP）的吸附动力学和热力学特性。结果表明,在所研究的浓度范围内,3种邻苯二甲酸酯的吸附动力学曲线均符合准二级速率方程,DMP、DEHP和DnOP分别在600、200和200min基本达到吸附平衡;3种邻苯二甲酸酯的吸附等温线基本符合Langmuir和Freundlich吸附等温方程;在283～308K范围,pH=6．36,3种邻苯二甲酸酯初始浓度均为50μg／L时,吸附过程△H为负值且绝对值为5～12kJ／mol,表明吸附为放热过程,以表面物理吸附为主,邻苯二甲酸酯在Mg／Al水滑石上的吸附是色散力、诱导力、取向力和氢键力等多种作用力协同作用的结果。     

Ambient air concentrations of polycyclic aromatic hydrocarbons,fluoride, suspended particles and particulate carbon in areas near aluminum production plants

Concentrations of airborne polycyclic aromatic hydrocarbons (PAH), fluoride, suspended particles and particulate carbon were determined in four different residential areas near aluminum industries. Two of the areas were exposed to pollutants from primary aluminum production, the third area was close to a plant manufacturing electrodes for the aluminum industry while the fourth area received pollutants from the production of aluminum as well as electrodes. The sampling time was 24 h and the samples were collected every eighth day for about 16 months. The concentrations of PAH were high compared to levels in other polluted areas with industry and dense traffic. The average concentrations for benzo(a)pyrene (BaP) were above 10 ngm⁻³, which has been proposed as a guideline in some countries, at all sites. The highest air concentration of BaP measured in the present study was 160 ng m⁻³. At two of the stations the fluoride concentrations exceeded the 24-h national guideline of 25 μgm⁻³, which has been set to protect human health. In a few cases the concentrations of suspended particles were high while the levels of carbon agreed with concentrations reported in urban and residential areas in U.S.A. The concentrations varied with time and the variation was caused mainly by the changes of the meteorological conditions. The frequency distributions were skew for all components and close to logarithmic normal. PAH were well correlated with fluoride, which is an aluminum production tracer, indicating that they are of the same origin. The aluminum industry did not seem to be the main source of particulate matter and carbon in air. Apportionment studies of the organic pollutants were carried out by cluster analysis, and the results showed that the aluminum production is the main source to the PAH in ambient air in these areas.     

Nitrification in natural waters with high suspended-solid content--a study for the Yellow River

In this research, the mechanism regarding the effects of suspended solids on nitrification in freshwater systems with high solid contents was examined. Experimental studies were conducted for natural water of the Yellow River under laboratory conditions. Nitrification kinetics was investigated in water systems with various levels of suspended-solid contents. The associated mechanisms were analyzed through investigation of the adsorption-desorption of ammonium nitrogen, the process of bacteria growth, and the feature of nitrification kinetics. The results indicated that the presence of suspended solids could accelerate the nitrification process. The nitrification rate would increase non-linearly with the increase of suspended-solid content. When the initial concentration of ammonia nitrogen was 12.70 mg/l in the water system, the ratios of half-time duration for nitrification would be 1.88:1.23:1 under suspended-solid contents of 0, 1.84 and 5.00 g/l, respectively. When the initial concentration of ammonia nitrogen was around 1.0 mg/l in the water system, the nitrification rates in systems with suspended-solid contents of 1.81 and 3.42 g/l would then be approximately 9 and 12 times that without suspended solids, respectively. The populations of nitrifying bacteria would rise with increasing suspended-solid content. The existence of suspended solids would increase the contact chances between bacteria and nitrogen, resulting in accelerated nitrification processes; this was manifested by the increased K(4) (tau(max)/K(S)) along with the raised suspended-solid contents while fitting nitrification kinetics with the growth-based logistic model. Since the amount of ammonium nitrogen adsorbed on suspended-solid surface was non-linearly proportional to the suspended-solid content, the nitrification rate was also non-linearly proportional to the suspended-solid content.     

Biotransformation rates of the butoxyethyl ester of 2,4-D by bottom and surface aufwuchs

An experiment was conducted to investigate the variability in biotransformation rate coefficients of a xenobiotic, the butoxyethyl ester of 2,4- , in natural waters between aufwuchs grown on Teflon strips located on the bottom and at the water surface of a pond and a river. The colonized strips and the natural waters were transported to the laboratory where the biotransformation studies were done under controlled conditions. Statistical analyses applied to the first-order rate coefficients showed a significant difference between bottom and surface aufwuchs for the river only. For both pond and river, a significant difference was shown when the aufwuchs was suspended, however. The aufwuchs mat thickness was significantly different between bottom and surface for the pond but not for the river and the biomass as ash-free dry weight was significantly different for both water bodies. The variability of biomass and first-order rate coefficients was higher with the bottom colonized aufwuchs than with the surface colonized aufwuchs.     

Current status and historical variations of phthalate ester (PAE) contamination in the sediments from a large Chinese lake (Lake Chaohu)

The residual levels of phthalate esters (PAEs) in the surface and two core sediments from Lake Chaohu were measured with a gas chromatograph–mass spectrometer (GC–MS). The temporal–spatial distributions, compositions of PAEs, and their effecting factors were investigated. The results indicated that di-n-butyl phthalate (DnBP), diisobutyl phthalate (DIBP), and di(2-ethylhexyl) phthalate (DEHP) were three dominant PAE components in both the surface and core sediments. The residual level of total detected PAEs (∑PAEs) in the surface sediments (2.146?±?2.255 μg/g dw) was lower than that in the western core sediments (10.615?±?9.733 μg/g) and in the eastern core sediments (5.109?±?4.741 μg/g). The average content of ∑PAEs in the surface sediments from the inflow rivers (4.128?±?1.738 μg/g dw) was an order of magnitude higher than those from the lake (0.323?±?0.093 μg/g dw), and there were similar PAE compositions between the lake and inflow rivers. This finding means that there were important effects of PAE input from the inflow rivers on the compositions and distributions of PAEs in the surface sediments. An increasing trend was found for the residual levels of ΣPAEs, DnBP, and DIBP from the bottom to the surface in both the western and eastern core sediments. Increasing PAE usage with the population growth, urbanization, and industrial and agricultural development in Lake Chaohu watershed would result in the increasing production of PAEs and their resulting presence in the sediments. The significant positive relationships were also found between the PAE contents and the percentage of sand particles, as well as TOC contents in the sediment cores.     

Identification,abundance and origin of atmospheric organic particulate matter in a Portuguese rural area

Respirable suspended particles high-volume samples were collected from a coastal-rural site in the centre of Portugal in August 1997 and their solvent-extractable organic compounds were subjected to characterisation by gas chromatography-mass spectrometry. Particles were also analysed by a thermal/optical technique in order to determine their black and organic carbon content. The total lipid extract yields ranged from 20 to 63 μg m⁻³, containing mainly aliphatic hydrocarbons such as n-alkanes, acids, alcohols, aldehydes, ketones and polycyclic aromatic hydrocarbons. The higher input of vascular plant wax components was demonstrated by the distribution patterns of the n-alkanes, n-alkanoic acids and n-alkanols homologous series, with C_max at C₂₉, C₂₂/C₂₄ and C₃₀, respectively. The CPI values for these series were in the range 1.8–9.7, being indicative of recent biogenic input from microbial lipid residues and flora epicuticular components. Specific natural constituents (e.g. phytosterols, terpenes, etc.) were identified as molecular markers. Some oxidation products from volatile organic precursors were also present in the aerosols. In addition, all samples had a component of petroleum hydrocarbons representing urban and vehicular emissions probably transported from the nearest cities and from the motorway in the vicinity. This data set could be used to make a mass balance with organic carbon, organic extracts and elutable matter, permitting also the comparison with lipid signatures observed for other regions.     

Organochlorines in different fractions of sediments and in different planktonic compartments of the Belgian continental shelf and the Scheldt estuary

PCB levels in sediments (bulk and fraction <63 microm), suspended matter and zooplankton from the Belgian continental shelf of the North Sea and the Scheldt estuary were evaluated in relation to their organic carbon content, their lipid content and, for sediments, their particle size distribution. PCB accumulation mechanisms are discussed, considering the importance of direct contamination (adsorption onto the cell surfaces, absorption through the cell walls and partitioning into the cell lipids) for suspended matter and sediments, and of indirect contamination through the food for zooplankton. Geographical and seasonal variations are described.     

Colloid and suspended particle migration experiments in a granite fracture

To determine the mobility of colloids (0.001–0.45 μm) and suspended particles (> 0.45 μm) in granite fractures, laboratory particle-migration and conservative tracer studies have been carried out in a natural fracture within a large granite block, with overall dimensions of 83×90×60 cm. Flow fields within this horizontal fracture were controlled through a set of 9 boreholes drilled orthogonally to the fracture. Laboratory experiments were performed using a range of average water velocities which contained values low enough to closely approximate the natural flow velocities of < 2 m yr⁻¹ in plutonic rocks of the Canadian Shield. The particles used had diameters between 0.02 and 22 μm, and included latex spheres, glass spheres and colloidal silica. Migration experiments were carried out with a filtered groundwater, ionic strength of 0.01 mol kg⁻¹, obtained from a granite fracture within the Whiteshell Research Area of Manitoba. Flushing experiments showed that suspended particles as large as 40 μm could be mobilized from the fracture surface. The mobility of suspended particles was significantly less than that of colloids. However, within the size range of colloids used in these studies (0.022–0.090 μm), colloid size did not affect colloid migration. Although, in general, colloids eluted ahead of the conservative tracer, colloid mobility was significantly reduced when the average groundwater velocity dropped below between 32 and 240 m yr⁻¹. Colloid transport was found to be very sensitive to flow path and flow direction.     

Characterization of dissolved organic matter in fogwater by excitation–emission matrix fluorescence spectroscopy

Dissolved organic matter (DOM) present in fogwater samples collected in southeastern Louisiana and central-eastern China has been characterized using excitation–emission matrix fluorescence spectroscopy. The goal of the study was to illustrate the utility of fluorescence for obtaining information on the large fraction of organic carbon in fogwaters (typically >40% by weight) that defies characterization in terms of specific chemical compounds without the difficulty inherent in obtaining sufficient fogwater volume to isolate DOM for assessment using other spectroscopic and chemical analyses. Based on the findings of previous studies using other characterization methods, it was anticipated that the unidentified organic carbon fraction would have characteristic peaks associated with humic substances and fluorescent amino acids. Both humic- and protein-like fluorophores were observed in the fogwater spectra and fluorescence-derived indices for the fogwater had similar values to those of soil and sediment porewater. Greater biological character was observed in samples with higher organic carbon concentrations. Fogwaters are shown to contain a mixture of terrestrially- and microbially-derived fluorescent organic material, which is expected to be derived from an array of different sources, such as suspended soil and dust particles, biogenic emissions and organic substances generated by atmospheric processes. The fluorescence results indicate that much of the unidentified organic carbon present in fogwater can be represented by humic-like and biologically-derived substances similar to those present in other aquatic systems, though it should be noted that fluorescent signatures representative of DOM produced by atmospheric processing of organic aerosols may be contributing to or masked by humic-like fluorophores.     

A study on emission of phthalate esters from plastic materials using a passive flux sampler

Phthalate esters are used as plasticizer in many plastics, and several studies have shown their toxicity. Phthalate esters are gradually emitted over time, and so it is conceivable that they pose a significant health risk. This study aims to investigate the temperature dependence of the emissions of various phthalate esters and to estimate the health risks of these emissions at various temperatures. A passive-type sampler was developed to measure the flux of phthalate esters from the surface of plastic materials. With this sampler, we examined three widely used plastic materials: synthetic leather, wallpaper and vinyl flooring. The observed maximum emissions of diethyl phthalate, dibutyl phthalate, and diethylhexyl phthalate (DEHP) from these materials at 20°C were 0.89, 0.77, and 14 μg m⁻² h⁻¹, respectively. Emissions at 80°C were 2.8, 4.5×10², and 1.5×10³ μg m⁻² h⁻¹, respectively. The results showed this temperature dependence is determined primarily by the type of phthalate ester and less so by the type of material. The estimation from the results of temperature dependence indicated the concentration of DEHP in a vehicle left out in the sunshine during the day can exceed the recommended levels of Japan Ministry of Health, Labour and Welfare.