Oxytetracycline sorption to organic matter by metal-bridging

The sorption of oxytetracycline to metal-loaded ion exchange resin and to natural organic matter by the formation of ternary complexes between polyvalent metal cations and sorbent- and sorbate ligand groups was investigated. Oxytetracycline (OTC) sorption to Ca- and Cu-loaded Chelex-100 resin increased with increasing metal/sorbate ratio at pH 7.6 (OTC speciation: 55% zwitterion, 45% anion). Greater sorption to Cu- than Ca-loaded resin was observed, consistent with the greater stability constants of Cu with both the resin sites and with OTC. Oxytetracycline sorption to organic matter was measured at pH 5.5 (OTC speciation: 1% cation, 98% zwitterion, 1% anion). No detectable sorption was measured for cellulose or lignin sorbents that contain few metal-complexing ligand groups. Sorption to Aldrich humic acid increased from "clean" < "dirty" (no cation exchange pretreatment) < Al-amended < Fe(III)-amended clean humic acid with K(d) values of 5500, 32000, 48000, and 250000 L kg(-1) C, respectively. Calcium amendments of clean humic acid suggested that a portion of the sorbed OTC was interacting by cation exchange. Oxytetracycline sorption coefficients for all humic acid sorbents were well-correlated with the total sorbed Al-plus-Fe(III) concentrations (r(2) = 0.87, log-log plot), suggesting that sorption by ternary complex formation with humic acid is important. Results of this research indicate that organic matter may be an important sorbent phase in soils and sediments for pharmaceutical compounds that can complex metals by the formation of ternary complexes between organic matter ligand groups and pharmaceutical ligand groups.     

Significance of anion exchange in pentachlorophenol sorption by variable-charge soils

Sorption data and subsequent predictive models for evaluating acidic pesticide behavior on variable-charge soils are needed to improve pesticide management and environmental stewardship. Previous work demonstrated that sorption of pentachlorophenol (PCP), a model organic acid, was adequately modeled by accounting for pH-and pKa-dependent chemical speciation and using two organic carbon-normalized sorption coefficients; one each for the neutral and anionic species. Such models do not account for organic anion interaction to positively charged surface sites, which can be significant for variable-charge minerals present in weathered soils typical of tropical and subtropical regions. The role of anion exchange in sorption of ionizable chemicals by variable-charge soils was assessed by measuring sorption of PCP by several variable-charge soils from aqueous solutions of CaCl2, CaSO4, Ca(H2PO4)2 as a function of pH. Differences in sorption from phosphate and chloride electrolyte solutions were attributed to pentachlorophenolate interactions with anion exchange sites. Suppression of PCP sorption by phosphate ranged from negligible in a soil with essentially no positively charge sites, as measured by negligible anion exchange capacity, to as much as 69% for variable-charge soils. Pentachlorophenolate exchange correlated well with the ratio of pH-dependent anion exchange capacity to net surface charge. Sorption reversibility of PCP by both CaCl2 and Ca(H2PO4)2 solutions was also demonstrated. Results for PCP clearly demonstrate that sorption to anion exchange sites in variable-charge soils should be considered in assessing pesticide mobility and that phosphate fertilizer application may increase the mobility of acidic pesticides.     

Soil sorption of acidic pesticides: modeling pH effects

A model of acidic pesticide sorption in soils was developed from theoretical modeling and experimental data, which initially considered a combination of a strongly acidic pesticide and a variable-charge soil with high clay content. Contribution of 2,4-D [(2,4-dichlorophenoxy) acetic acid] anionic-form sorption was small when compared with molecular sorption. Dissociation of 2,4-D was not sufficient to explain the variation in Kd as a function of pH. Accessibility of soil organic functional groups able to interact with the pesticide (conformational changes) as a function of organic matter dissociation was proposed to explain the observed differences in sorption. Experimental 2,4-D sorption data and K(oc) values from literature for flumetsulam [N-(2,6-difluorophenyl)-5-methyl [1,2,4] triazolo [1,5-a] pyrimidine-2-sulfonamide] and sulfentrazone [N-[2,4-dichloro-5-[4-(difluromethyl)-4,5-dihydro-3-methyl-5-oxo-1H-1,2,4-triazol-1-yl] phenyl] methanesulfonamide] in several soils fit the model.     

Sorption kinetics and equilibria of organic pesticides in carbonatic soils from South Florida

A batch reactor was used to determine sorption kinetic parameters (k2, F, and K*) and the equilibrium sorption coefficient (K). The two-site nonequilibrium (TSNE) batch sorption kinetics model was used to calculate the kinetic parameters. Two probe organic pesticides, atrazine [2-chloro-4-ethylamino-6-isopropylamino-s-triazine] and diuron [3-(3,4-dichlorophenyl)-1,1-dimethylurea] were studied using three carbonatic soils from South Florida (Chekika, Perrine, and Krome), one noncarbonatic soil from Iowa (Webster), and one organic soil (Lauderhill) from South Florida. Carbonatic soils contained more than 600 g kg(-1) CaCO3. Sorption is initially very fast up to 3 h and then slowly reaches equilibrium. All soil-chemical combinations reached sorption equilibrium after about 24 h and all sorption isotherms were linear. The sorption kinetics data were well described by the TSNE model for all soil-chemical combinations except for the marl soil data (Perrine-Atrazine), which were better described by the one-site nonequilibrium (OSNE) model. Diuron, with higher K, undergoes slower sorption kinetics than atrazine. The Lauderhill soil containing organic carbon (OC) of 450 g kg(-1) exhibited slowest sorption kinetics for both pesticides. An inverse relationship between k3 and K was observed for atrazine and diuron separately in Chekika, Webster, and Lauderhill soils but not in Perrine and Krome soils. The sorption kinetic parameters were used to distinguish the sorption behavior between atrazine and diuron and to identify differences between soils. Normalizing the sorption coefficient (K) to OC showed that atrazine and diuron had K oc values in carbonatic soils that were a third of reported literature values for noncarbonatic soils. Using existing literature K oc values in solute transport models will most likely underestimate the mobility of atrazine, diuron, and other neutral organic chemicals in carbonatic soils.     

Sorption interactions between imazaquin and a humic acid extracted from a typical Brazilian oxisol

Soil sorption of most hydrophobic organic compounds (e.g., nonpolar pesticides) is directly related to soil organic matter (SOM) content. Humic substances are the major SOM components, containing carboxylic, phenolic, amine, quinone, and other functional groups, and specific structural configurations. In this paper, sorption interactions between imazaquin (2-[4,5-dydro-4-methyl-4-(1-methylethyl)-5-oxo-1H- imidazol-2-yl]-3-quinoline-carboxylic acid) herbicide (IM) and a humic acid (HA) extracted from a typical Brazilian Oxisol were studied with electron paramagnetic resonance (EPR) and Fourier-transform infrared (FTIR) spectroscopic techniques. A polarographic technique was used to quantify sorption. The IM amount sorbed on the HA was much higher than that on the whole soil within the pH range studied, emphasizing the prominent role played by SOM on IM sorption. Moreover, IM sorption increased as the soil-solution pH decreased. This enhancement in sorption was attributed to the hydrophobic affinity of the herbicide by the HA and to the electrostatic interaction between the protonated quinoline group of IM and the negative sites of the HA. Hydrophobic regions in the HA's interior at low pH (< 5.0) were recently demonstrated by an EPR detectable spin-label molecule. The FTIR and EPR spectroscopy and polarography data indicated weak interaction between IM and the soil and its HA, involving hydrogen bonding, proton transfer, and cation exchange (at low pH), and mainly hydrophobic interactions. However, no strong reaction mechanism, such as charge transfer, was involved. In addition, this research suggested that soil amendment with organic material might increase magnitude of IM sorption, consequently avoiding leaching and carryover problems usually found for mobile and persistent herbicides such as imazaquin.     

Effects of mineral surfaces on pyrene partitioning to well-characterized humic substances

Mineral surfaces can alter the ability of humic substances (HS) to bind hydrophobic organic contaminants. In this study, complete adsorption (i.e., to avoid HS adsorptive fractionation effects) of a small subset of well-characterized terrestrial and aquatic HS on kaolinite and hematite significantly changed their subsequent organic carbon-normalized partition coefficients K(ads)(oc) for pyrene relative to their original respective dissolved organic carbon-normalized partition coefficients K(dis)(oc). Parallel experiments with ultrafiltration (UF) fractions obtained from purified Aldrich humic acid (PAHA) (Aldrich Chemical, Milwaukee, WI) gave similar results. The heterogeneity among the PAHA UF fractions was examined via their mineral surface adsorption characteristics and their subsequent ability to bind pyrene. As expected, variations in maximum adsorption densities (q(max)), Langmuir adsorption constants (K(q)), and pyrene K(ads)(oc) values were observed among the PAHA UF fractions. However, general trends of q(max), K(q), and pyrene log K(ads)(oc) values for the PAHA UF fractions versus the logarithm of their weight-average molecular weights (MW(w)) did not typically match the corresponding trends obtained with the four aquatic and terrestrial HS. In general, an ideal mixture competitive adsorption model gave reasonable predictions for PAHA sorption to kaolinite and hematite based on their corresponding UF isotherm parameters. Ideal mixture predictions of pyrene partitioning to adsorbed PAHA from the corresponding UF fraction results were better for kaolinite versus hematite, indicating that the underlying mineral surface can alter the effects of HS heterogeneity on hydrophobic organic contaminant sorption.     

Structural and sorption characteristics of adsorbed humic acid on clay minerals

Clay-humic complexes are commonly distributed in natural environments. They play very important roles in regulating the transport and retention of hydrophobic organic contaminants in soils and sediments. This study examined the structural changes of humic acid (HA) after adsorption by clay minerals and determined phenanthrene sorption by clay-humic complexes. Solid- and liquid-state 13C nuclear magnetic resonance (NMR), for the first time, provided direct evidence for HA fractionation during adsorption on mineral surfaces, that is, aliphatic fractions were preferentially adsorbed by clay minerals while aromatic fractions were left in the solution. The ratio of UV absorbance of HA at 465 and 665 nm (E4 to E6 ratio), which is related to aromaticity, corroborated with the NMR results. For both montmorillonite and kaolinite, adsorbed HA fractions had higher sorption linearity (N) and affinity (K(oc)) than the source HA. The K(oc) of adsorbed HA for the clay-humic complexes could be up to several times higher than that of the source HA. This large increase may be contributed by the low polarity of the bound HA. Moreover, for each mineral, the N values of adsorbed HA increased with increasing HA loading. It is believed that HA may develop a more condensed structure on mineral surface at lower HA loading level due to the stronger interactions between HA and mineral surface as a result of close contacts.     

Sorption and mobility of ivermectin in different soils

Avermectins are widely used to treat livestock for parasite infections. Ivermectin, which belongs to the group of avermectins, is particularly hazardous to the environment, especially to crustaceans and to soil-dwelling organisms. Sorption is one of the key factors controlling transport and bioavailability. Therefore, batch studies have been conducted to characterize the sorption and desorption behavior of ivermectin in three European soils (Madrid, York, and artificial soil). The solid-water distribution coefficient (K(d)) for ivermectin sorption to the tested soils were between 57 and 396 L kg(-1) (determined at 0.1 microg g(-1)), while the organic carbon-normalized sorption coefficients (K(oc)) ranged from 4.00 x 10(3) to 2.58 x 10(4) L kg(-1). The Freundlich sorption coefficient (K(F)) was 396 (after 48 h) for the artificial soil over a concentration range of 0.1 to 50 microg g(-1), with regression constants indicating a concentration-dependent sorption. The obtained data and data in the literature are inconclusive with regard to whether hydrophobic partitioning or more specific interactions are involved in sorption of avermectins. For abamectin, hydrophobic partitioning seems to be one of the dominant types of binding, while hydrophobicity is less important for ivermectin, which is probably due to the lower lipophilicity of the molecule. Furthermore, the presence of cations such as Ca(2+) leads to decreasing sorption. Thus, it is presumed that ivermectin binds to soil by formation of complexes with immobile, inorganic soil matter. In contrast to abamectin, hysteresis could be excluded for ivermectin in the studied soils for the evaluation of sorption and desorption. The sorption mechanism is highly dependent on physicochemical properties of the avermectin.     

Sorption of aromatic compounds to clay mineral and model humic substance-clay complex: effects of solute structure and exchangeable cation

Clay minerals and humic substance (HS)-clay complexes are widely distributed in soil environments. Improved predictions on the uptake of organic pollutants by soil require a better understanding of fundamental mechanisms that control the relative contribution from organic and inorganic constituents. Five selected aromatic compounds varying in electronic structure, including nonpolar phenanthrene (PHEN), 1,2,4,5-tetrachlorobenzene (TeCB), polar 1,3-dinitrobenzene (DNB), 2,6-dichlorobenzonitrile (dichlobenil [DNL]), and 1-naphthalenyl methylcarbamate (carbaryl [CBL]), were sorbed separately from aqueous solution to Na(+)-, K(+)-, Cs(+)-, and Ca(2+)-saturated montmorillonites with and without the presence of dissolved HS at pH about 6. Upon normalizing for hydrophobic effects by solute aqueous solubility, the overall trend of sorptive affinity to HS-free K(+)-clay is DNB > DNL, CBL > PHEN, TeCB, indicating preferential adsorption of the polar solutes. With the presence of HS, sorption of PHEN, TeCB, and CBL increases by several times compared with the pure clay, attributed to HS-facilitated hydrophobic partition (PHEN and TeCB) or H-bonding (CBL). The enhanced sorption of PHEN by HS is cation dependent, where Cs(+) shows the strongest facilitative effect. Coadsorption of HS does not affect sorption of DNB and DNL to clays except that of DNB to Ca(2+)-clay because cation-dipole interactions between the polar group (NO(2) or CN) of solute and weakly hydrated exchangeable cations dominate the overall sorption.     

Reactivity of the plant growth regulator paclobutrazol (cultar) with two tropical soils of the northeast semiarid region of Brazil

The reactivity of paclobutrazol (PBZ, a plant growth retardant) with a Yellow Ultisol and a Vertisol from the semiarid northeast region of Brazil was evaluated through batch sorption experiments and modeling. Although not instantaneous, the sorption kinetic of PBZ (pure and formulated) was fast (a few hours) in both soils. The sorption kinetics were well described by a second-order (dS(t)/dt=k(2)(S(e2)-S(t))(2)) but not by a first-order model. The sorption isotherms were found to be linear and the calculated K(D) values were 8.8 +/- 0.11 and 7.4 +/- 0.2 L kg(-1) for pure PBZ in the Ultisol and the Vertisol, respectively. The corresponding K(OC) values were 1275 +/- 34 (logK(OC) = 3.11) and 1156 +/- 49 (logK(OC) = 3.06) L kg(-1), respectively. Considering the very different texture of the two soils and the similar K(OC) values determined, these results showed that in both soils, the sorption of PBZ is dominantly controlled by organic matter, although some interactions of PBZ with iron oxides (goethite) were observed in the Ultisol. Based on these sorption parameters a low leachability potential of PBZ in soils is anticipated, as they correspond to a groundwater ubiquity score (GUS) ranging from 2.0 to 2.7, i.e., moderately to not mobile, in contradiction with the actual groundwater situation in Brazil. This work stresses the need to evaluate and predict the risk associated with aquifer contamination by this widely used plant growth regulator.     

On the interaction mechanisms of atrazine and hydroxyatrazine with humic substances

Atrazine (6-chloro-N2-ethyl-N4-isopropyl-1,3,5-triazine-2,4-diamine) is retained against leaching losses in soils principally by sorption to organic matter, but the mechanism of sorption has been a matter of controversy. Conflicting evidence exists for proton transfer, electron transfer, and hydrophobic interactions between atrazine and soil humus, but no data are conclusive. In this paper we add to the database by investigating the role of (i) hydroxyatrazine (6-hydroxy-N2-ethyl-N4-isopropyl-1,3,5-triazine-2,4-diamine) and (ii) hydrophobicity in the sorption of atrazine by Brazilian soil humic substances. We demonstrate, apparently for the first time, that hydroxyatrazine readily forms electron-transfer complexes with humic substances. These complexes probably are the cause of the well-known strong adsorption by humic acids and they may be the undetected cause of apparent electron-transfer complexes between soil organic matter and atrazine, whose transformation to the hydroxy form is facile. We also present evidence that supports the important contribution of hydrophobic interactions to the pH-dependent sorption of atrazine by humic substances.     

Distribution behavior of pyrene to adsorbed humic acids on kaolin

The distribution behavior of pyrene on humic acid (HA)-kaolin complexes, prepared by adsorbing HA on kaolin, was investigated by batch experiments. The distribution coefficient (Kd) of pyrene on the HA-kaolin complex increased with the fraction (f(oc)) of organic carbon adsorbed to the surface of the kaolin. This can be attributed to hydrophobic interactions between pyrene and the adsorbed HAs. The effects of adsorbed HAs were quantitatively evaluated by calculating the distribution coefficient (K(oc)) and affinity constant (K(oc)ads) for pyrene to the adsorbed HAs. A fluorescence quenching method was employed to determine the affinity constant (K(oc)aq) of pyrene to HAs dissolved in an aqueous solution. When the K(oc) values were compared with the K(oc)aq values, the K(oc) values were found to be 4 to 11 times larger than the K(oc)aq values. On the other hand, the K(oc)ads values were 4 to 9 times larger than the K(oc)aq values. These indicate that the affinity for pyrene is enhanced by the adsorption of HAs to kaolin. In addition, the K(oc) values increased with increasing average molecular weights of the HAs. These results demonstrate that HAs, when they are adsorbed to clay minerals, play an important role in the deposition of polycyclic aromatic hydrocarbons (PAHs) in a soil environment.     

Sorption of apolar aromatic compounds to soil humic acid particles affected by aluminum(III) ion Cross-Linking

Sorption of hydrophobic compounds in soils often shows nonlinearity, competition, and hysteresis. Since such behaviors have been associated with organic polymers in glassy state, it has been postulated that some forms of soil humic substances are glassy. The glassy state is favored by properties that decrease the flexibility of macromolecules, such as cross-linking, presence of unsaturated bonds, and high molecular weight. Polyvalent metal ions, which are abundant in soils, may cross-link humic substances by coordinating to multiple functional groups on different strands. Accordingly, we prepared an Al(3+)-cross-linked humic acid (Al-HA) from the H(+) form (H-HA) of a soil humic acid by a flocculation technique that leaves Al ions bound to organic groups. Sorption of naphthalene and 1,2,4-trichlorobenzene (TCB) on H-HA was nonlinear, competitive, and slightly hysteretic, in agreement with previous studies showing glass transition temperatures of humic acids that lie above room temperature. Nonlinearity, competition, and hysteresis were all enhanced in Al-HA, validating the hypothesis that metal ion cross-linking enhances nonideal sorption. Application of a glassy polymer sorption model reveals that cross-linking increases the affinity of solutes for the hole domain relative to the dissolution domain. The results (i) indicate that isolated, purified soil humic acid behaves like a glassy solid, (ii) indicate that metal-ion cross-linking creates a more rigid-chain structure and supports a link between nonideal sorption and the glassy character of soil organic matter, and (iii) underscore the importance of metal ions on humic structure in relation to sorption of hydrophobic organic compounds.     

Sorption of trace metals by standard and micro suction cups in the absence and presence of dissolved organic carbon

Both the bioavailability of a trace metal (TM) in a soil and the risk of leaching to the ground water are linked to the metals concentration in the soil solution. Sampling soil solution by tension lysimetry with suction cups is a simple and established technique that is increasingly used for monitoring dissolved TM in soils. Of major concern, however, is the sorption of TM by the walls of the samplers. Metal sorption by different materials used in suction cups can vary widely, depending also on the chemistry of the soil solution. We compared the sorption of Cu, Zn, Cd, and Pb by different standard-size and micro suction cups in the laboratory at two pH values (4.5 and 7.5 or 8.0) in absence and presence of dissolved organic carbon (DOC). In addition, we investigated the sorption of DOC from different origins by the cup materials. At both pH values, the weakest sorption of all four TMs was exhibited by standard-size suction cups based on nylon membranes and by hollow fibers made from polyvinyl alcohol (PVA). At alkaline pH, borosilicate glass, ceramic materials, and polytetrafluorethylene (PTFE) mixed with silicate were characterized by generally strong sorption of all investigated TMs. In addition, Cu and Pb were strongly sorbed at low pH by PTFE-silicate and a ceramic material used for the construction of standard-size suction cups. On the other hand, sorption of Cu, Zn, and Cd by ceramic capillaries produced from pure aluminum oxide was negligible at low pH. Micro suction cups made of an unknown polymerous tube sorbed Cu strongly, but were well suited to monitor Zn, Cd, and Pb at low pH, and, in the presence of DOC, also at high pH. Major cations (Na+, Mg2+, K+, Ca2+) and anions (Cl-, NO3-, SO4(2-)) were not or very weakly sorbed by all cup materials, except for Mg2+, K+, and Ca2+ by borosilicate glass at pH 7.5. Trace metal sorption by suction cups was generally greatly reduced in the presence of DOC, especially at alkaline pH. The sorption of DOC itself depended on its source. Dissolved organic carbon from leaf litter extracts with a probably large hydrophobic fraction was sorbed more strongly than mainly hydrophilic DOC from a mineral soil solution.     

Virus retention and transport as influenced by different forms of soil organic matter

Organic materials are widespread in natural soil and aquatic environments. Their effect on virus transport is very important in assessing the risk for contamination of ground water by viruses. This study aimed to determine how different forms (mineral-associated and dissolved) of natural organic matter influence the retention and transport of two bacteriophages (MS-2 and phiX174) in two porous media (a sand and a soil). We found that mineral-associated organic matter significantly promoted the transport of one virus (MS-2) but not the other (phiX174) in a phosphate-buffered saline solution. Similarly, MS-2 was retained less in sand columns with increasing concentrations of dissolved humic acid, while little effect was observed for phiX174 under the same conditions. The two viruses have different surface properties and thus exhibited different reactivity to the metal oxides present on sand particles and were affected differently by organic matter. Because the organic matter used in the study was negatively charged and hydrophilic, blocking of virus sorption sites and increasing of virus-medium electrostatic repulsion arising from modification of the sand and virus surface by organic matter are probably responsible for the facilitated transport. For dissolved humic acid, its competition for sorption sites with viruses was an additional mechanism involved. This study suggests that the effect of organic matter varied depending on the organic material properties and the type of viruses involved. As a general trend, the effect of organic matter was dominated by electrostatic rather than hydrophobic interactions.     

Using surfactant-modified clays to determine sorption mechanisms for a representative organic base, quinoline

Sorption of a representative ionizable nitrogen heterocycle, quinoline (pKa = 4.92), was investigated to determine the relative contributions of the neutral and protonated species to the overall process. Batch sorption experiments were conducted on surfactant-modified clays that were synthesized from the exchange of hexadecyltrimethylammonium cations for resident sodium cations on a specimen smectite (Swy-2) at 0, 60, 80, and 100% of the clay's cation exchange capacity (CEC). Hexadecyltrimethylammonium exchange creates highly effective organic partitioning domains within the clay interlayers in proportion to their coverage on the exchange complex. The fractionally exchanged clays, therefore, provided discrete exchange and organic partitioning domains for the protonated and neutral species of quinoline. Data were described by a combined Langmuir-linear isotherm that permitted independent characterization of both sorption components. Results indicated that cationic sorption dominated but that the neutral species can contribute substantially given sufficient organic carbon content relative to the CEC and at pH above the pKa of quinoline. The data obtained in this study for quinoline demonstrated that the combined isotherm (including cation exchange and hydrophobic partitioning terms) describes sorption data and compares favorably with the purely empirical Freundlish isotherm.     

Sorption and stability of the polycyclic nitramine explosive CL-20 in soil

The polycyclic nitramine CL-20 (2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane) is being considered for use as a munition, but its environmental fate and impact are unknown. The present study consisted of two main elements. First, sorption-desorption data were measured with soils and minerals to evaluate the respective contributions of organic matter and minerals to CL-20 immobilization. Second, since CL-20 hydrolyzes at a pH of >7, the effect of sorption on CL-20 degradation was examined in alkaline soils. Sorption-desorption isotherms measured using five slightly acidic soils (5.1 < pH < 6.9) containing various amounts of total organic carbon (TOC) revealed a nonlinear sorption that increased with TOC [K(d) (0.33% TOC) = 2.4 L kg(-1); K(d) (20% TOC) = 311 L kg(-1)]. Sorption to minerals (Fe(2)O(3), silica, kaolinite, montmorillonite, illite) was very low (0 < K(d) < 0.6 L kg(-1)), suggesting that mineral phases do not contribute significantly to CL-20 sorption. Degradation of CL-20 in sterile soils having different pH values increased as follows: sandy agricultural topsoil from Varennes, QC, Canada (VT) (pH = 5.6; K(d) = 15 L kg(-1); 8% loss) < clay soil from St. Sulpice, QC, Canada (CSS) (pH = 8.1; K(d) = 1 L kg(-1); 82% loss) < sandy soil provided by Agriculture Canada (SAC) (pH = 8.1, K(d) = approximately 0 L kg(-1); 100% loss). The faster degradation in SAC soil compared with CSS soil was attributed to the absence of sorption in the former. In summary, CL-20 is highly immobilized by soils rich in organic matter. Although sorption retards abiotic degradation, CL-20 still decomposes in soils where pH is >7.5, suggesting that it will not persist in even slightly alkaline soils.     

Co-composting of acid waste bentonites and their effects on soil properties and crop biomass

Acid waste bentonite is a byproduct from vegetable oil bleaching that is acidic (pH < 3.0) and hydrophobic. These materials are currently disposed of in landfills and could potentially have a negative impact on the effective function of microbes that are intolerant of acidic conditions. A study was undertaken using three different sources of acid waste bentonites, namely soybean oil bentonite (SB), palm oil bentonite (PB), and rice bran oil bentonite (RB). These materials were co-composted with rice husk, rice husk ash, and chicken litter to eliminate their acid reactivity and hydrophobic nature. The organic carbon (OC) content, pH, exchangeable cations, and cation exchange capacity (CEC) of the acid-activated bentonites increased significantly after the co-composting phase. In addition, the hydrophobic nature of these materials as measured using the water drop penetration time (WDPT) decreased from >10 800 s to 16 to 80 s after composting. Furthermore, these composted materials showed positive impacts on soil physical attributes including specific surface area, bulk density, and available water content for crop growth. Highly significant increases in maize biomass (Zea mays L.) production over two consecutive cropping cycles was observed in treatments receiving co-composted bentonite. The study clearly demonstrates the potential for converting an environmentally hazardous material into a high-quality soil conditioner using readily available agricultural byproducts. It is envisaged that the application of these composted acid waste bentonites to degraded soils will increase productivity and on-farm income, thus contributing toward food security and poverty alleviation.     

Imazaquin adsorbed on pillared clay and crystal violet-montmorillonite complexes for reduced leaching in soil

Ground water pollution due to herbicide leaching has become a serious environmental problem. Imazaquin [2-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)quinoline-3-carboxylic acid] is an herbicide used to control broadleaf weeds in legume crops. Imazaquin is negatively charged at the basic pH of calcareous soils and exhibits high leaching potential in soils. Our aim was to design formulation of imazaquin to reduce herbicide leaching. Imazaquin sorption on pillared clay (PC) and crystal violet (CV)-montmorillonite complexes was studied. The CV-montmorillonite complexes become positively charged with adsorption of CV above the cation exchange capacity (CEC) of montmorillonite, and thus can sorb imazaquin. The Langmuir equation provides a good fit to isotherms of imazaquin sorption on PC and CV-montmorillonite complexes, but for charged complexes an equation that combines electrostatics with specific binding was preferred. Maximal imazaquin sorption was 17.3 mmol kg-1 for PC and 22.2 mmol kg-1 for CV-montmorillonite complexes. The extents of imazaquin desorption into water were 21% for PC and 5% for CV-clay complexes. The presence of anions decreased imazaquin sorption on both sorbents in the sequence phosphate > acetate > sulfate. Reduction of imazaquin sorption by the anions and the extent of its desorption in electrolyte solutions were higher for PC than for CV-clay complexes. Leaching of imazaquin from CV-montmorillonite formulations through soil (Rhodoxeralf) columns was two times less than from PC formulations and four times less than that of technical imazaquin. The CV-montmorillonite complexes at a loading above the CEC appear to be suitable for preparation of organo-clay-imazaquin formulations that may reduce herbicide leaching significantly.     

Phenanthrene sorption to structurally modified humic acids

Several studies emphasize the importance of soil organic matter characteristics in hydrophobic contaminant sorption and outline the strong dependence of sorption on organic matter aromaticity. In this study, the role of organic matter aromaticity in phenanthrene sorption was investigated using humic acids (HAs) from compost, peat, and soil that were structurally modified by bleaching, hydrolysis, oximation, and subcritical water extraction. The HAs were characterized with cross polarization magic angle spinning carbon-13 nuclear magnetic resonance (CPMAS 13C NMR) spectroscopy and used in batch equilibrations with phenanthrene. Bleaching substantially reduced the aromaticity of the samples whereas the other treatments increased the relative aromaticity. Phenanthrene sorption increased, even though there was a substantial reduction in sorbent aromaticity with some samples. The HAs that exhibited comparable CPMAS 13C NMR spectra and aromaticity did not behave similarly with respect to phenanthrene sorption. When the sorption data (K(oc) values) were correlated to sample aromaticity, the correlation coefficients (r2) did not exceed 0.39. Comparisons with the atomic H to C ratio provided slightly better r2 values (up to 0.54). This study demonstrates that macroscopic sorbent characteristics could not explain the observed phenanthrene sorption coefficients, aliphatic structural components of HAs can contribute appreciably to phenanthrene sorption, and organic matter physical conformation may regulate access to organic matter structures. Therefore, the use of only macroscopic sorbent properties, such as aromaticity, to predict and rationalize sorption values cannot solely be used to explain the behavior of organic contaminants in soil environments.