Modelling of a large-scale urban contamination situation and remediation alternatives

The Urban Remediation Working Group of the International Atomic Energy Agency's EMRAS (Environmental Modelling for Radiation Safety) program was organized to address issues of remediation assessment modelling for urban areas contaminated with dispersed radionuclides. The present paper describes the first of two modelling exercises, which was based on Chernobyl fallout data in the town of Pripyat, Ukraine. Modelling endpoints for the exercise included radionuclide concentrations and external dose rates at specified locations, contributions to the dose rates from individual surfaces and radionuclides, and annual and cumulative external doses to specified reference individuals. Model predictions were performed for a “no action” situation (with no remedial measures) and for selected countermeasures. The exercise provided a valuable opportunity to compare modelling approaches and parameter values, as well as to compare the predicted effectiveness of various countermeasures with respect to short-term and long-term reduction of predicted doses to people.     

Mapping radioactivity in groundwater to identify elevated exposure in remote and rural communities

A survey of radioactivity in groundwater (110 sites) was conducted as a precursor to providing a baseline of radiation exposure in rural and remote communities in Queensland, Australia, that may be impacted upon by exposure pathways associated with the supply, treatment, use and wastewater treatment of the resource. Radionuclides in groundwater, including ²³⁸U, ²²⁶Ra, ²²²Rn, ²²⁸Ra, ²²⁴Ra and ⁴⁰K were measured and found to contain activity concentration levels of up to 0.71 BqL⁻¹, 0.96 BqL⁻¹, 108 BqL⁻¹, 2.8 BqL⁻¹, 0.11 BqL⁻¹ and 0.19 BqL⁻¹ respectively. Activity concentration results were classified by aquifer lithology, showing correlation between increased radium isotope concentration and basic volcanic host rock. The groundwater survey and mapping results were further assessed using an investigation assessment tool to identify seven remote or rural communities that may require additional radiation dose assessment beyond that attributed to ingestion of potable water.     

Application of the ERICA Assessment Tool to freshwater biota in Finland

In recent years there has been growing international interest in the assessment of doses and risks from ionising contaminants to biota. In this study the ERICA Tool, developed within the EC 6th Framework Programme, was applied to estimate incremental dose rates to biota in freshwater ecosystems in Finland mainly resulting from exposure to the Chernobyl-derived radionuclides ¹³⁷Cs, ¹³⁴Cs and ⁹⁰Sr. Data sets consisting of measured activity concentrations in fish, aquatic plants, lake water and sediment for three selected lakes located in a region with high ¹³⁷Cs deposition were applied in the assessment. The dose rates to most species studied were clearly below the screening level of 10 μGy h⁻¹, indicating no significant impact of the Chernobyl fallout on these species. However, the possibility of higher dose rates to certain species living on or in the bottom sediment cannot be excluded based on this assessment.     

An ecological economics approach to the management of a multi-purpose coastal wetland

Three interrelated management problems—eutrophication of multiple use shallow lakes, sea level rise and flood risk mitigation and tourism pressures—are analysed in the context of an internationally important wetland area, the Norfolk and Suffolk Broads in the UK. The ecological-economic research findings presented should provide essential information to underpin the regulatory and management process in this internationally important conservation area. The relevant authority somehow has to integrate the maintenance of public navigation rights, nature conservation, and tourism promotion in a highly dynamic ecosystems setting. Because of the stakeholder conflicts, potential and actual, a more inclusionary decision-making procedure is required, and is currently being implemented.     

Modelling radioactivity in the Irish Sea: From discharge to dose

In order to support authorised discharges of low level radioactive liquid effluent into coastal regions, mathematical models are required to robustly predict radiological impacts on critical groups of current and proposed changes to liquid discharges. The grid model presented here simulates the long term dispersion and transport of radioactivity discharged from the Sellafield site in Cumbria, UK, and the subsequent exposure of critical groups in Cumbria and across the Irish Sea in Northern Ireland. The fine grid of the model allows a good resolution of the seabed sediment distribution. This benefits the predictions for the last decades of low discharge level, when bed sediment can become a source of contamination by bringing back the legacy of past high discharges. This is highlighted by the dose comparison, where the predicted dose to Cumbria critical group follows well the dose estimated from environmental data during the low discharge level period.     

The influence of hot particle contamination on Sr and Cs transfers to milk and on time-integrated ingestion doses

Most models for transfers of radionuclides through the food chain typically assume that the radioactivity is initially deposited in chemically available forms. It is known, however, that releases of radionuclides in the form of hot particles may significantly influence their environmental transfers and uptake to the food chain. This study presents models for time changes in ⁹⁰Sr and ¹³⁷Cs in milk which incorporate hot particle contamination using observed rates of hot particle dissolution following the Chernobyl accident. A general equation is presented for the influence of hot particles on overall ingestion doses. As expected from previous work, fallout of hot particles significantly influences time changes in radionuclide activity concentrations in foodstuffs. It is also shown that incorporation of radionuclides in hot particles influences time-integrated ingestion doses. For a situation in which a large proportion (90–100%) of fallout is in slowly dissolving hot particles, time-integrated ingestion doses from ⁹⁰Sr and ¹³⁷Cs are reduced by a factor of approximately two compared to the case where all radioactivity is deposited in bioavailable forms. However, the influence of rapidly dissolving hot particles on time-integrated ingestion doses is relatively minor. Remaining significant uncertainties in dose estimates are discussed.     

Exposure to radon in Swedish dwellings — Attitudes and elimination

Owners of 208 dwellings with radon daughter concentrations of 400 Bq/m³ EER or above were asked about attitudes and measures toward elimination via mailed questionnaires. The response rate was 88% and some steps toward elimination had been taken in 83 dwellings. For the remaining houses, no improvements had been made either because of financial problems, lack of technical advice, or doubts about radon daughter exposure as a health hazard. The results of this study suggest the need to more definitely assess the risk through epidemiologic studies, as well as to provide more information about technical solutions and financial support to house owners.     

Factors affecting metal toxicity to (and accumulation by) aquatic organisms — Overview

This literature review encompasses aquatic environmental toxicities of metals and metalloids. The emphasis is on the influencing factors on metal toxicity to aquatic organisms. The effects of environmental factors on metal uptake are also discussed. The factors can be divided into biotic and abiotic. The biotic factors include tolerance, size and life stages, species, and nutrition related to the test organisms. The abiotic factors include organic substances, pH, temperature, alkalinity and hardness, inorganic ligands, interactions, sediments, and others. These factors can alter metal toxicity in the aquatic environment substantially, mostly causing attenuating effect. The literature shows divergent results. For example, the interactions between Cd and Zn were reported to be synergistic by some researchers and antagonistic by others. It is recommended that environmental hazard assessment takes into consideration the results of standard toxicity tests and site-specific conditions which can moderate metal toxicity considerably.     

A new approach to assessment and management of the impact from medical liquid radioactive waste

The Swedish regulations concerning disposal of clinical radioactive waste are currently under revision and a graded approach is proposed for risk limitation purposes. To assist the revision procedures, a screening study was performed to estimate public exposures from liquid releases from hospitals to public sewers. The results showed that doses to sewage workers were above the dose constraint of 100muSva(-1) especially for (131)I and (99m)Tc. Hence, a dynamic model, LUCIA, was developed for realistic assessments in which radionuclide transportation in sewers was modelled. Probabilistic simulations were performed to obtain probability distributions of radionuclide concentrations in sludge. Concurrently, estimates of the effective doses to sewage workers decreased significantly and were below 10muSva(-1) except for (111)In and (131)I. However, the Kd-coefficients representing the partition of radioactivity between water and sludge in sewers are highly uncertain for (111)In. As shown by sensitivity studies, these values are the major determinant of the exposures in sewers.     

Measuring combined exposure to environmental pressures in urban areas: an air quality and noise pollution assessment approach

This study presents a methodological scheme developed to provide a combined air and noise pollution exposure assessment based on measurements from personal portable monitors. Provided that air and noise pollution are considered in a co-exposure approach, they represent a significant environmental hazard to public health. The methodology is demonstrated for the city of Thessaloniki, Greece. The results of an extensive field campaign are presented and the variations in personal exposure between modes of transport, routes, streets and transport microenvironments are evaluated. Air pollution and noise measurements were performed simultaneously along several commuting routes, during the morning and evening rush hours. Combined exposure to environmental pollutants is highlighted based on the Combined Exposure Factor (CEF) and Combined Dose and Exposure Factor (CDEF). The CDEF takes into account the potential relative uptake of each pollutant by considering the physical activities of each citizen. Rather than viewing environmental pollutants separately for planning and environmental sustainability considerations, the possibility of an easy-to-comprehend co-exposure approach based on these two indices is demonstrated. Furthermore, they provide for the first time a combined exposure assessment to these environmental pollutants for Thessaloniki and in this sense they could be of importance for local public authorities and decision makers. A considerable environmental burden for the citizens of Thessaloniki, especially for VOCs and noise pollution levels is observed. The material herein points out the importance of measuring public health stressors and the necessity of considering urban environmental pollution in a holistic way.     

Ricin as a weapon of mass terror — Separating fact from fiction

In recent years there has been an increased concern regarding the potential use of chemical and biological weapons for mass urban terror. In particular, there are concerns that ricin could be employed as such an agent. This has been reinforced by recent high profile cases involving ricin, and its use during the cold war to assassinate a high profile communist dissident. Nevertheless, despite these events, does it deserve such a reputation? Ricin is clearly toxic, though its level of risk depends on the route of entry. By ingestion, the pathology of ricin is largely restricted to the gastrointestinal tract where it may cause mucosal injuries; with appropriate treatment, most patients will make a full recovery. As an agent of terror, it could be used to contaminate an urban water supply, with the intent of causing lethality in a large urban population. However, a substantial mass of pure ricin powder would be required. Such an exercise would be impossible to achieve covertly and would not guarantee success due to variables such as reticulation management, chlorination, mixing, bacterial degradation and ultra-violet light. By injection, ricin is lethal; however, while parenteral delivery is an ideal route for assassination, it is not realistic for an urban population. Dermal absorption of ricin has not been demonstrated. Ricin is also lethal by inhalation. Low doses can lead to progressive and diffuse pulmonary oedema with associated inflammation and necrosis of the alveolar pneumocytes. However, the risk of toxicity is dependent on the aerodynamic equivalent diameter (AED) of the ricin particles. The AED, which is an indicator of the aerodynamic behaviour of a particle, must be of sufficiently low micron size as to target the human alveoli and thereby cause major toxic effects. To target a large population would also necessitate a quantity of powder in excess of several metric tons. The technical and logistical skills required to formulate such a mass of powder to the required size is beyond the ability of terrorists who typically operate out of a kitchen in a small urban dwelling or in a small ill-equipped laboratory. Ricin as a toxin is deadly but as an agent of bioterror it is unsuitable and therefore does not deserve the press attention and subsequent public alarm that has been created.     

Market-based solutions: An appropriate approach to resolve environmental problems

It was the first time that the Intergovernmental Panel on Climate Change(IPCC),which was founded in 1988,regarded climate change as a significant international political problem(O’Brien and Williams 2007).Over the next decades,environmentalist and policy makers have been applying many efficient ways to solve various environmental problems and have gained achievements.With the support of successful cases,this paper will focus on the market-based solutions and discuss its advantages compared with the conventional approach.     

Requirements for estimation of doses from contaminants dispersed by a ‘dirty bomb’ explosion in an urban area

The ARGOS decision support system is currently being extended to enable estimation of the consequences of terror attacks involving chemical, biological, nuclear and radiological substances. This paper presents elements of the framework that will be applied in ARGOS to calculate the dose contributions from contaminants dispersed in the atmosphere after a ‘dirty bomb’ explosion. Conceptual methodologies are presented which describe the various dose components on the basis of knowledge of time-integrated contaminant air concentrations. Also the aerosolisation and atmospheric dispersion in a city of different types of conceivable contaminants from a ‘dirty bomb’ are discussed.     

An approach to improve the Austrian Radon Potential Map by Bayesian statistics

A Radon Potential Map as well as a mean indoor Radon Concentration Map is available from the Austrian National Radon Project (1992-2002). These maps are based on the average Radon Potential/Concentration within every municipality and they sort municipalities into three radon ‘risk’ classes. This is a convenient way for the administration, but it does not describe the real radon risk distribution within a municipality because of the often inhomogeneous geological situation. Therefore, a combination of indoor radon data with all relevant parameters such as house type, storey and ventilation rates along with geological information should be used to improve the existing radon maps. The method, described here, uses Bayes' theory to combine the Radon Potential derived from indoor radon measurements with information from geology. The existing Radon Potential Map was improved by using available soil gas radon data at certain geological units and extrapolated transfer factors. The modifications of the map are shown and several problems arising with the application of this technique are discussed.     

Air quality management in the WHO European Region — Results of a quality assurance and control programme on air quality monitoring (1994–2004)

Since the last decade the WHO Collaborating Centre for Air Quality Management and Air Pollution Control, Berlin, Germany, operates a quality assurance and control (QA/QC) programme on air quality monitoring in the WHO European Region. As main activity Intercomparison workshops have been established for air monitoring network laboratories on a regular basis to harmonise air quality measurements, analysis and calibration techniques. 36 air hygiene laboratories of public health and environmental institutions of 24 countries participated in twelve Intercomparisons between 1994 and 2004. The majority was carried out for NO, NO₂, SO₂ and O₃. The results were predominantly satisfactory for automatic methods. The results of manual methods were mainly in a good, and for several concentration levels partly very good accordance with the data obtained by the monitors.     

An approach to comparative assessments of potential health risks from exposure to radionuclides and hazardous chemicals

The need to compare potential health risks to the public associated with different activities that can result in releases of hazardous substances to the environment is becoming increasingly important in decision-making. In making such comparisons, it is desirable to use equivalent indicators of potential health risks for radionuclides, chemical carcinogens, and noncarcinogenic hazardous chemicals. Current approaches to risk assessment that were developed for purposes of protecting human health do not provide equivalent indicators of potential risks from exposure to radionuclides and hazardous chemicals. Comparisons of environmental concentrations or calculated exposures or risks with standards for protection of public health also do not provide equivalent indicators of potential risks. We propose a simple approach to comparative risk assessments in which calculated exposures to any hazardous substances are expressed relative to no-observed-effect levels (NOELs) or, preferably, lower confidence limits of benchmark doses (BMDLs) in humans. This approach provides an equivalent, science-based indicator of the relative risks posed by different exposures to any hazardous substances.     

Impact of European legislation on marketed pesticides — A view from the standpoint of health impact assessment studies

The very significant impact of European legislation (Directive 91/414/EEC) on the authorization of plant protection products is reviewed herein, which has resulted in withdrawal of 704 active substances (AS) out of 889 assessed so far. The list of currently approved 276 AS includes 194 AS “existing” in the market before 1993 and 82 “new” AS introduced during the last 15 years. Results of toxicity characterization of the approved AS are also summarized, utilizing several well-known databases. Although significant data gaps exist for a rather large part of the approved AS, it is found that 84 AS are positive for at least one health effect (after chronic and/or acute exposure) including carcinogenicity, reproductive and neuro-developmental disorders, as well as endocrine disruption. The toxicity characterization results of this study are compared to those of recent assessments by other organizations (KemI, the Swedish Chemicals Agency, and the Pesticide Safety Directorate of the UK), where interpretation and use is made of AS “cut-off” criteria foreseen in new EU legislation. These studies report a comparatively smaller AS number with positive toxicity characterization. The possibility of some additional AS withdrawal in the near future, combined with the rather small rate of new AS introduction (approx. 5 per year) suggest that the list of approved AS over the next 10–15 years may not change very drastically. Consideration of the above trends is necessary and instructive in evaluating results of existing health impact assessment (HIA) studies, as well as in planning new ones. Due to the very drastic change in the number and type of marketed AS, that took place within the past 8–9 years, it is suggested that new HIA studies (based on epidemiological data after year 2000) should focus on a rather short time frame and, therefore, on appropriate cohort groups, e.g. young children. For the same reason, results of epidemiological studies of the past (involving banned AS) should be carefully interpreted and used with caution.     

An approach to the subslab depressurization remedial action in a high Rn concentration dwelling

Galicia (NW Spain) is a radon-prone area in the Iberian Peninsula. Measurements were carried out at a rural dwelling, with an annual average of radon concentration over 4000 Bq m⁻³ and a maximum of 9000 Bq m⁻³, found during a radon screening campaign held in the Autonomous Community of Galicia. We performed a detailed study to identify the main contamination source and the behaviour of the radon concentration, in which a linear dependence with temperature was verified, once corrected for relative humidity. We used different passive methods (charcoal canisters and two types of etched track detectors) as well as a radon concentration monitor that provided continuous measurement. Subsequent to this characterization, and in order to reduce the high radon concentration, a remedial action was developed using different passive and forced ventilation methods. A modified subslab depressurization technique was found to be the most effective remedy, providing a radon concentration reduction of around 96%. This method also has the advantages of being inexpensive and reliable over time.     

Annoyance due to aircraft noise has increased over the years—Results of the HYENA study

In the HYENA study (HYpertension and Exposure to Noise near Airports) noise annoyances due to aircraft and road traffic noise were assessed in subjects that lived in the vicinity of 6 major European airports using the 11-point ICBEN scale (International Commission on Biological Effects of Noise). A distinction was made between the annoyance during the day and during the night. L_den and L_night were considered as indicators of noise exposure. Pooled data analyses showed clear exposure–response relationships between the noise level and the noise annoyance for both exposures. The exposure–response curves for road noise were congruent with the EU standard curves used for predicting the number of highly noise annoyed subjects in European communities. Annoyance ratings due to aircraft noise, however, were higher than predicted by the EU standard curves. The data supports other findings suggesting that the people's attitude towards aircraft noise has changed over the years, and that the EU standard curve for aircraft noise should be modified.     

An enhanced sustainable approach for design and manufacturing with an application to fuselages for mono-seat civil sailplanes

Abstract

A number of tools and software systems have been developed in order to reduce the time for the design and manufacturing of industrial products. Nowadays, virtual modelling by Computer Aided Design (CAD) systems and process simulation by the application of Finite Element Method (FEM) software is a standard routine in order to compress product design activities and to achieve the optimal solution before producing any real components. These developments provided not only a reduction in the time to market but a higher complexity of the project and an improved quality of the industrial products. With the aim to further improve the sustainability of this activity, the implementation of a tool that adds automatic operations into the design activity is demonstrated. This software can interact with any CAD and helps designers when the object dimension and shape can be affected by limits and constraints deriving from different features and targets, such as the spatial collocation of the component and the interaction with other limiting items, for examples the material and the manufacturing issues. The concept was developed into the software SFIDA (Sailplane Fuselage Integrated Design Application) that is a first attempt to automatically manage multiple relations and optimise their combination.