Effects of lead contamination on soil microbial activity and rice physiological indices in soil-Pb-rice (Oryza sativa L.) system

The effect of lead (Pb) treatment on the soil microbial activities (soil microbial biomass and soil basal respiration) and rice physiological indices were studied by greenhouse pot experiment. Pb was applied as lead acetate at six different levels in two different paddy soils, namely 0 (control), 100, 300, 500, 700, 900 mg kg-1 soil. The results showed that the application of Pb at lower level (<300 mg kg-1) as lead acetate resulted in a slight increase in soil microbial activities compared with the control, and had an inhibitory influence at high concentration (>500 mg Pb kg-1 soil), which might be the critical concentration of Pb causing a significant decline in the soil microbial activities. However, the degree of influence on soil microbial activities by Pb was related to the clay and organic matter contents of the soils. On the other hand, when the level of Pb treatments increased to 500 mg kg-1, there was ecological risk for both soil microbial activities and plants. The results also revealed that there was a consistent trend that the chlorophyll contents increased initially, and then decreased gradually with increase in Pb concentration. Pb was effective in inducing proline accumulation and its toxicity causes oxidative stress in rice plants. In a word, soil microbial activities and rice physiological indices, therefore, may be sensitive indicators reflecting environmental stress in soil-Pb-rice system.     

Contrasting lead speciation in forest and tilled soils heavily polluted by lead metallurgy

The concentration trends and chemical fractionation of Pb was studied in eight tilled and forest soil profiles heavily polluted by Pb metallurgy in the Pribram district, Czech Republic. The highest Pb concentrations were observed in surface and subsurface horizons attaining 35,300 mg kg-1 in forest soils and 1233 mg kg-1 in tilled soils. Total Pb concentrations were one order of magnitude lower in tilled soil due to intensive ploughing and annual crop off-take. The results of the Tessier sequential extraction procedure showed the preferential binding of Pb in forest soils to operationally-defined exchangeable positions and soil organic matter (oxidisable fraction). The Pb exchangeable fraction is thought to correspond to weak electrostatic binding on the functional groups of organic matter. In tilled soil, Pb is predominantly bound to operationally-defined Fe and Mn oxides (reducible fraction). A comparison with the background Pb concentration values showed a strong contamination even in mineral horizons IIC and confirmed a strong vertical mobility of Pb within the soil profiles. The calculated mobility factors (MF) showed that up to 72% of Pb is mobile and bioavailable in forest soils. In contrast, the bioavailability of Pb in tilled soils was significantly lower as the MF accounted for up to 30%. In the most polluted horizon of forest soil profile, the X-ray powder diffraction (XRPD) analysis confirmed the presence of anglesite (PbSO4), derived likely from the smelter emissions.     

The EDTA effect on phytoextraction of single and combined metals-contaminated soils using rainbow pink (Dianthus chinensis)

Rainbow pink (Dianthus chinensis), a potential phytoextraction plant, can accumulate high concentrations of Cd from metal-contaminated soils. The soils used in this study were artificially added with different metals including (1) CK: original soil, (2) Cd-treated soil: 10 mg Cd kg(-1), (3) Zn-treated soil: 100 mg Zn kg(-1), (4) Pb-treated soil: 1000 mg Pb kg(-1), (5) Cd-Zn-treated soil: 10 mg Cd kg(-1) and 100 mg Zn kg(-1), (6) Cd-Pb-treated soil: 10 mg Cd kg(-1) and 1000 mg Pb kg(-1), (7) Zn-Pb-treated soil: 100 mg Zn kg(-1) and 1000 mg Pb kg(-1), and (8) Cd-Zn-Pb-treated soil: 10 mg Cd kg(-1), 100 mg Zn kg(-1), and 1000 mg Pb kg(-1). Three concentrations of 2Na-EDTA solutions (0 (control), 2, and 5 mmol kg(-1) soil) were added to the different metals-treated soils to study the influence of applied EDTA on single and combined metals-contaminated soils phytoextraction using rainbow pink. The results showed that the Cd, Zn, Pb, Fe, or Mn concentrations in different metals-treated soil solutions significantly increased after applying 5 mmol EDTA kg(-1) (p<0.05). The metal concentrations in different metals-treated soils extracted by deionized water also significantly increased after applying 5 mmol EDTA kg(-1) (p<0.05). Because of the high extraction capacity of both 0.005 M DTPA (pH 5.3) and 0.05 M EDTA (pH 7.0), applying EDTA did not significantly increase the Cd, Zn, or Pb concentration in both extracts for most of the treatments. Applying EDTA solutions can significantly increase the Cd and Pb concentrations in the shoots of rainbow pink (p<0.05). However, this was not statistically significant for Zn because of the low Zn concentration added into the contaminated soils. The results from this study indicate that applying 5 mmol EDTA kg(-1) can significantly increase the Cd, Zn, or Pb concentrations both in the soil solution or extracted using deionized water in single or combined metals-contaminated soils, thus increasing the accumulated metals concentrations in rainbow pink shoots. The proposed method worked especially well for Pb (p<0.05). The application of 2 mmol EDTA kg(-1) might too low to enhance the phytoextraction effect when used in silty clay soils.     

Lead and zinc bioavailability to Eisenia fetida after phosphorus amendment to repository soils

Four phosphorus forms were investigated as potential soil amendments to decrease the bioavailability of Pb and Zn in two repository soils to the earthworm, Eisenia fetida. Treatments were evaluated by examining differences in bioaccumulation factors between amended and non-amended soils. Triple super phosphate at 5000 mg P/kg decreased both Pb and Zn bioavailability in both soils. Rock phosphate at 5000 mg P/kg decreased Zn bioavailability, but not Pb bioavailability in both repository soils. Monocalcium phosphate and tricalcium phosphate at 5000 mg P/kg did not significantly decrease Pb or Zn bioavailability to earthworms in either repository soil. In order to optimize phosphorus amendments, additional phosphorus (up to 15,000 mg P/kg) and lowered pH were used in a series of tests. The combination of lowering the pH below 6.0 and increasing phosphorus concentrations caused complete mortality in all triple super phosphate amended soils and partial mortality in the highest rock phosphate amended soils. Results indicate that triple super phosphate and rock phosphate are viable soil amendments, but care should be taken when optimizing amendment quantity and pH so that adverse environmental effects are not a by-product.     

Thermal Immobilization of Lead Contaminants in Soils Treated in a Fixed- and Fluidized-Bed Incinerator at Moderate Temperatures

Abstract

Artificially lead-contaminated soils with different lead contents (200, 450, 600, and 900 ppm) were thermally immobilized in both fixed-bed and fluidized-bed modes at moderate treating temperatures (less than 500 °C) for various retention times. Cement powder and brick powder were added to the artificially contaminated soils to enhance lead immobilization. Results indicate that increasing treating temperature and time increases the extent of lead immobilization, as determined by the U.S. Environmental Protection Agency's (U.S. EPA) Toxicity Characteristics Leachability Procedure (TCLP). The percentage of lead leached from the soil/ cement mixtures was in the range of less than 0.251%, compared with the range between 13.6% and 40.7% for the corresponding soil/brick mixtures. As the amount of brick dust added to the Pb-doped soil was increased, the specific Pb immobilization effectiveness increased from 0.0675 to 0.149 mg Pb/g brick (for the 20- and 50-gram brick addition, respectively). An increase in air flow rate from 2 to 40 L/min caused a slight decrease in the Pb leaching percentage from 14.96% to 11.59%. Both the Freundlich and Langmuir isotherms give a satisfactory fit (r = 0.945 ~ 0.998) for the data derived from a TCLP test of the thermally-treated soil samples (105 °C and 500 °C) that contained lead contaminants. Sorption of lead contaminants in soil and sorbent matrices was the primary type of chemisorption. The kinetic results indicated that the Pb-doped soil system was too complicated to be described by a simple calculation.     

Appendix

Abstract

The interaction of glyphosate [N‐(phosphonomethyl)‐glycine] with four typical European soils is reported. Results of adsorption and desorption isotherms show that the interaction of glyphosate with these soils was mainly related to content of iron and aluminium amorphus hydroxides. Moreover, it was found that the presence of divalent cations in 2: 1 clay minerals also contribute to glyphosate adsorption. The S‐type form of the adsorption isotherms revealed the existence of two different binding sites. These were exchangeable cations at low herbicide concentration and Fe and Al at higher glyphosate concentrations. The K maximum values of adsorption provided by the linear form of the Langmuir equation were found to be more consistent with soil parameters than those calculated by the Freundlich equation. The order of desorption from the soils was the reverse of that found for adsorption. Moreover, desorption varied from around 15 to 80% of the adsorbed herbicide according to the soil characteristics. This indicated that glyphosate adsorption on soils is far from being permanent and leaching to lower soil horizons with limited biological activity may occur.     

Sorption-desorption of atrazine and diuron in soils from southern Brazil

The objective of this study was to investigate the behavior of sorption and desorption of the herbicides atrazine (6-chloro-N2-ethyl-N4-isopropyl-1,3,5-triazine-2,4-diamine) and diuron [3-(3,4-dichlorophenyl)-1,1-dimethyleurea] in soil samples from a typical lithosequence located in the municipality of Mamborê (PR), southern Brazil. Five concentrations of 14C-atrazine and 14C-diuron were used for both herbicides (0.48, 0.96, 1.92, 3.84, and 7.69 mg L(-1)). Sorption of both herbicides correlated positively with the organic carbon and clay content of the soil samples. Sorption isotherms were well described by the Freundlich model. The slope values of the isotherm (N) ranged from 0.84 to 0.90 (atrazine) and from 0.75 to 0.79 (diuron) for the lithosequence samples. Sorption of diuron was high regardless of the soil texture or the concentration added. The desorption isotherms for atrazine and diuron showed good fit to the Freundlich equation (R2 >or= 0,87). Atrazine slope values for the desorption isotherms were similar for the different concentrations and were much lower than those observed for the sorption isotherms. Significant hysteresis was observed in the herbicide desorption. When the two herbicides were compared, it was found that diuron (N = 0.06-0.22) presented more pronounced hysteresis than atrazine. The results showed that, quantitatively, a greater atrazine fraction applied to these soils remains available to be leached in the soil profile, as compared to diuron.     

The influence of time on lead toxicity and bioaccumulation determined by the OECD earthworm toxicity test

Internationally agreed standard protocols for assessing chemical toxicity of contaminants in soil to worms assume that the test soil does not need to equilibrate with the chemical to be tested prior to the addition of the test organisms and that the chemical will exert any toxic effect upon the test organism within 28 days. Three experiments were carried out to investigate these assumptions. The first experiment was a standard toxicity test where lead nitrate was added to a soil in solution to give a range of concentrations. The mortality of the worms and the concentration of lead in the survivors were determined. The LC50s for 14 and 28 days were 5311 and 5395 microgPb g(-1)soil respectively. The second experiment was a timed lead accumulation study with worms cultivated in soil containing either 3000 or 5000 microgPb g(-1)soil. The concentration of lead in the worms was determined at various sampling times. Uptake at both concentrations was linear with time. Worms in the 5000 microg g(-1) soil accumulated lead at a faster rate (3.16 microg Pb g(-1)tissue day(-1)) than those in the 3000 microg g(-1) soil (2.21 microg Pb g(-1)tissue day(-1)). The third experiment was a timed experiment with worms cultivated in soil containing 7000 microgPb g(-1)soil. Soil and lead nitrate solution were mixed and stored at 20 degrees C. Worms were added at various times over a 35-day period. The time to death increased from 23 h, when worms were added directly after the lead was added to the soil, to 67 h when worms were added after the soil had equilibrated with the lead for 35 days. In artificially Pb-amended soils the worms accumulate Pb over the duration of their exposure to the Pb. Thus time limited toxicity tests may be terminated before worm body load has reached a toxic level. This could result in under-estimates of the toxicity of Pb to worms. As the equilibration time of artificially amended Pb-bearing soils increases the bioavailability of Pb decreases. Thus addition of worms shortly after addition of Pb to soils may result in the over-estimate of Pb toxicity to worms. The current OECD acute worm toxicity test fails to take these two phenomena into account thereby reducing the environmental relevance of the contaminant toxicities it is used to calculate.     

Thallium in French agrosystems--I. Thallium contents in arable soils

The thallium (Tl) content of the upper horizons of 244 French soils was determined as the first step towards the creation of a reference data bank for total Tl content of arable soils. Forty soil samples were collected in the vicinity of potential anthropogenic sources of Tl, but the remainder came from rural areas. The distribution of Tl concentrations in soils was characterized by a median value of 0.29 mg Tl kg(-1) and a 90th percentile value of 1.54 mg Tl kg(-1). Very high pedogeochemical contents were found (up to 55 mg Tl kg(-1)) but none could be attributed to obvious anthropogenic pollution. Areas of very high Tl concentration belong to an epihercynian transgression zone with a contact between a sedimentary basin and a crystalline massif. This contact is associated with stratified mineralizations (Zn, Pb, F, Sb, Ba, Tl and pyrites). High Tl concentrations were common in limestone, marl or granite derived soils, and the Tl in limestones or marls is probably concentrated in the sulfides contained in these rocks because Tl has a high affinity to S. In granites, Tl may be in the micas and feldspars because Tl+ can replace K+ in these minerals. Silty or clay-silty soils showed the highest concentrations. These granulometric fractions contain the majority of the minerals, which are supposed to be the major hosts of Tl in soils, i.e. clay minerals, oxides and micas. Tl in the soils was positively correlated with Ba, V, Pb, Fe, Ni, Cd, Zn, Co, As and especially Mn. A significant proportion of Tl may be in the Mn oxides: in oxidizing conditions, Tl(III) could enter the Mn oxides by sorption, or Tl(I) could replace K(I) in the oxide.     

Growth and trace metal accumulation of two Salix clones on sediment-derived soils with increasing contamination levels

The growth and metal uptake of two willow clones (Salix fragilis 'Belgisch Rood' and Salix viminalis 'Aage') was evaluated in a greenhouse pot experiment with six sediment-derived soils with increasing field Cd levels (0.9-41.4 mg kg-1). Metal concentrations of eight elements were measured in roots, stems and leaves and correlated to total and soil water metal concentrations. Dry weight root biomass, number of leaves and shoot length were measured to identify eventual negative responses of the trees. No growth inhibition was observed for both clones for any of the treatments (max. 41.4 mg kg-1 Cd, 1914 mg kg-1 Cr, 2422 mg kg-1 Zn, 655 mg kg-1 Pb), allowing their use for phytoextraction on a broad range of contaminated sediments. However, dry weight root biomass and total shoot length were significantly lower for S. viminalis compared to S. fragilis for all treatments. Willow foliar Cd concentrations were strongly correlated with soil and soil water Cd concentrations. Both clones exhibited high accumulation levels of Cd and Zn in aboveground plant parts, making them suitable subjects for phytoextraction research. Cu, Cr, Pb, Fe, Mn and Ni were found mainly in the roots. Bioconcentration factors of Cd and Zn in the leaves were highest for the treatments with the lowest soil Cd and Zn concentration.     

Fractionation of heavy metals and distribution of organic carbon in two contaminated soils amended with humic acids

The effects of humic acids (HAs) extracted from two different organic materials on the distribution of heavy metals and on organic-C mineralisation in two contaminated soils were studied in incubation experiments. Humic acids isolated from a mature compost (HAC) and a commercial Spaghnum peat (HAP) were added to an acid soil (pH 3.4; 966 mg kg(-1) Zn and 9,229 mg kg(-1) Pb as main contaminants) and to a calcareous soil (pH 7.7; 2,602 mg kg(-1) Zn and 1,572 mg kg(-1) Pb as main contaminants) at a rate of 1.1g organic-C added per 100g soil. The mineralisation of organic-C was determined by the CO(2) released during the experiment. After 2, 8 and 28 weeks of incubation the heavy metals of the soils were fractionated by a sequential extraction procedure. After 28 weeks of incubation, the mineralisation of the organic-C added was rather low in the soils studied (<8% of TOC in the acid soil; <10% of TOC in the calcareous soil). Both humic acids caused significant Zn and Pb immobilisation (increased proportion of the residual fraction, extractable only with aqua regia) in the acid soil, while Cu and Fe were slightly mobilised (increased concentrations extractable with 0.1M CaCl(2) and/or 0.5M NaOH). In the calcareous soil there were lesser effects, and at the end of the experiment only the fraction mainly related to carbonates (EDTA-extractable) was significantly increased for Zn and decreased for Fe in the humic acids treated samples. However, HA-metal interactions provoked the flocculation of these substances, as suggested by the association of the humic acids with the sand fraction of the soil. These results indicate that humic acid-rich materials can be useful amendments for soil remediation involving stabilisation, although a concomitant slight mobilisation of Zn, Pb and Cu can be provoked in acid soils.     

Copper, zinc and lead speciation in salt marsh sediments colonised by Halimione portulacoides and Spartina maritima

Total concentrations and fractionation of Cu, Zn and Pb in seven operationally defined phases (exchangeable, carbonates, manganese oxides, organic complexes, amorphous iron oxides, crystalline iron oxides and residual) were determined in sediments colonised by the halophyte species Halimione portulacoides and Spartina maritima in a Tagus estuary salt marsh (Portugal). We aimed to determine whether the speciation of these metals was different in areas colonised by each halophyte. Higher concentrations of Cu, Zn and, in particular Pb, were found in the rhizosphere of S. maritima than in the root sediments of H. portulacoides. Geochemical fractionation of Cu, Zn and Pb in sediments of the salt marsh depended upon the metal, and for Zn and Pb clearly varied with depth and with the colonising species. The higher redox potential observed in sediments colonised by H. portulacoides may in part explain the observed differences in the speciation of Cu, Zn and Pb.     

Effects of EDTA on solubility of cadmium, zinc, and lead and their uptake by rainbow pink and vetiver grass

Rainbow pink (Dianthus chinensis), a potential phytoextraction plant, can accumulate high concentrations of Cd from contaminated soils. Vetiver grass (Vetiver zizanioides) has strong and long root tissues and is a potential phytostabilization plant since it can tolerate and grow well in soils contaminated with multiple heavy metals. Soil was moderately artificially contaminated by cadmium (20 mg/kg), zinc (500 mg/kg), and lead (1000 mg/kg) in pot experiments. Three concentrations of Na2-EDTA solution (0, 5, and 10 mmol/kg soil) were added to the contaminated soils to study the influence of EDTA solution on phytoextraction by rainbow pink or phytostabilization by vetiver grass. The results showed that the concentrations of Cd, Zn, and Pb in a soil solution of rainbow pink significantly increased following the addition of EDTA (p < 0.05). The concentrations of Cd and Pb in the shoots of rainbow pink also significantly increased after EDTA solution was applied (p < 0.05), but the increase for Zn was insignificant. EDTA treatment significantly increased the total uptake of Pb in the shoot, over that obtained with the control treatment (p < 0.001), but it did not significantly increase the total uptake of Cd and Zn. The concentrations of Zn and Pb in the shoots of rainbow pink are significantly correlated with those in the soil solution, but no relationship exists with concentrations in vetiver grass. The toxicity of highly contaminating metals did not affect the growth of vetiver grass, which was found to grow very well in this study. Results of this study indicate that rainbow pink can be considered to be a potential phytoextraction plant for removing Cd or Zn from metal-contaminated soils, and that vetiver grass can be regarded as a potential phytostabilization plant that can be grown in a site contaminated with multiple heavy metals.     

Effects of the antibiotics oxytetracycline and tylosin on soil fauna

Antibiotics may enter the terrestrial environment when amending soils with manure. A Note of Guidance on ecological risk assessment of veterinary medicines was issued in January 1998. Hardly any information about ecotoxicological effects of already existing substances are available. This study has tested the effects of two widely used antibiotics, tylosin and oxytetracycline, on three species of soil fauna: Earthworms, springtails and enchytraeids. Neither of the substances had any effect at environmentally relevant concentrations. The lowest observed effect concentration was 3000 mg kg-1 and in many cases no effect was seen even at the highest test concentration of 5000 mg kg-1.     

Sequential sorption of lead and cadmium in three tropical soils

It is important to examine mechanisms of Pb and Cd sorption in soils to understand their bioavailability. The ability of three tropical soils to retain Pb, Cd, and Ca was evaluated. The objectives of this study were to (1) determine the extent to which soil sorption sites are metal specific, (2) investigate the nature of reactions between metals and soil surfaces, and (3) identify how metals compete for sorption sites when they are introduced to soils sequentially or concurrently. Lead was shown to be much less exchangeable than Cd and inhibited Cd sorption. Cadmium had little effect on Pb sorption, though both Ca and Cd inhibited the adsorption of Pb at exchange sites. Lead appears to more readily undergo inner-sphere surface complexation with soil surface functional groups than either Cd or Ca. Thus, regardless of when Pb is introduced to a soil, it should be less labile than Cd.     

Effects of low-molecular-weight organic acids and residence time on desorption of Cu, Cd, and Pb from soils

Effects of low-molecular-weight organic acids (LMWOAs) and residence time on desorption of Cu, Cd, and Pb from two typical Chinese soils were studied. Citric, malic, and acetic acids were chosen as representatives of LMWOAs commonly present in soils. CaCl(2) and NaNO(3) were used in desorption as they were main soil background electrolytes for comparison. Desorption of Cu, Cd, and Pb from both soils followed the descending order: citric acid>malic acid>acetic acid>CaCl(2)>NaNO(3), which was consistent with the order of stability of Cu-, Cd-, and Pb-LMWOAs complexes from large to small and ion exchange ability of Ca(2+) and Na(+). Desorption of metals by inorganic salts decreased with increasing desorption solution pH. Whereas desorption of metals by LMWOAs showed different trend in response to pH change due to their different complexing abilities. Malic and acetic acids released less metals at low pH 3.1 compared with citric acid at pH 7, indicating that pH was not the dominant factor governing the release of metals. In addition, all LMWOAs desorbed more metals than inorganic salts, CaCl(2) and NaNO(3). Therefore, organic ligands played a dominant role in desorption of heavy metals. More metals were released from Jiangxi soil than from Heilongjiang soil due to lower soil pH, CEC, organic matter content and manganese oxide of Jiangxi soil. Generally, desorption of metals decreased with increasing residence time of metals in soils.     

Remediation of heavy metals contaminated soils by ball milling

In the present work, the use of ball milling reactors for the remediation of lead contaminated soils was investigated. Lead immobilization was achieved without the use of additional reactants but only through the exploitation of weak transformations induced on the treated soil by mechanical loads taking place during collisions among milling media. The degree of metal immobilization was evaluated by analyzing the leachable fraction of Pb(II) obtained through the "synthetic precipitation leaching procedure". The reduction of leachable Pb(II) from certain synthetic soils, i.e., bentonitic, sandy and kaolinitc ones, was obtained under specific milling regimes. For example, for the case of bentonitic soils characterized by a Pb(II) concentration in the solid phase equal to 954.4 mg kg(-1), leachable Pb(II) was reduced, after 7 h of mechanical treatment, from 1.3 mg l(-1) to a concentration lower than the USEPA regulatory threshold (i.e., 0.015 mg l(-1) for drinkable water). Similar results were obtained for sandy and kaolinitic soils. X-ray diffraction, scanning electron microscopy, electron dispersive spectroscopy and granulometric analyses revealed no significant alterations of the intrinsic character of sandy and bentonitic soils after milling except for a relatively small increase of particles size and a partial amorphization of the treated soil. On the other hand, the mechanical treatment caused the total amorphization of kaolinitic soil. The increase of immobilization efficiency can be probably ascribed to specific phenomena induced by mechanical treatment such as entrapment of Pb(II) into aggregates due to aggregation, solid diffusion of Pb(II) into crystalline reticulum of soil particles as well as the formation of new fresh surfaces (through particle breakage) onto which Pb(II) may be irreversibly adsorbed.     

Heavy metal contamination of roadside soils in the Greater Athens area

The airborne contamination of roadside soils with Pb, Cd, Zn and Ni was evaluated for the Greater Athens Area of Greece. High levels of lead enrichment were found in the upper 0-5 cm soil layer along roads with heavy traffic loads. The central section of the study area appeared to have soils with the highest levels of lead enrichment. The contamination decreased exponentially with the distance from the road edge and dropped to a background level at about 50 m. Most of the lead was concentrated in the upper 5 cm of the soil and was associated with carbonates and crystalline oxides. The main source of contamination was automobile exhausts. Roadside soils were also enriched with airborne Cd and Zn, but to a lesser degree than with Pb. The enrichment of the soil with these two elements fell rapidly and exponentially with distance. No evidence of Ni contamination of roadside soils was obtained.     

Sorption-Desorption of Atrazine and Diuron in Soils from Southern Brazil

The objective of this study was to investigate the behavior of sorption and desorption of the herbicides atrazine (6-chloro-N ²-ethyl-N ⁴-isopropyl-1,3,5-triazine-2,4-diamine) and diuron [3-(3,4-dichlorophenyl)-1,1-dimethyleurea] in soil samples from a typical lithosequence located in the municipality of Mamborê (PR), southern Brazil. Five concentrations of ¹⁴C-atrazine and ¹⁴C-diuron were used for both herbicides (0.48, 0.96, 1.92, 3.84, and 7.69 mg L^?1). Sorption of both herbicides correlated positively with the organic carbon and clay content of the soil samples. Sorption isotherms were well described by the Freundlich model. The slope values of the isotherm (N) ranged from 0.84 to 0.90 (atrazine) and from 0.75 to 0.79 (diuron) for the lithosequence samples. Sorption of diuron was high regardless of the soil texture or the concentration added. The desorption isotherms for atrazine and diuron showed good fit to the Freundlich equation (R ² ≥ 0,87). Atrazine slope values for the desorption isotherms were similar for the different concentrations and were much lower than those observed for the sorption isotherms. Significant hysteresis was observed in the herbicide desorption. When the two herbicides were compared, it was found that diuron (N = 0.06–0.22) presented more pronounced hysteresis than atrazine. The results showed that, quantitatively, a greater atrazine fraction applied to these soils remains available to be leached in the soil profile, as compared to diuron.     

Influence of organic amendments on copper distribution among particle-size and density fractions in Champagne vineyard soils

The intensive use for over 100 years of copper sulfate (Bordeaux mixture) to fight against mildew in vineyard soils has led to an important, widespread accumulation of Cu (100 to 1500 mg Cu kg-1 soil). In Champagne vineyards, organic amendments are used currently to increase soil fertility and to limit soil erosion. Organic amendments may have a direct effect on the retention of Cu in the soil. To assess the influence of the organic management on the fate of Cu in calcareous Champagne vineyard soils, we studied Cu distribution (1) in the soil profile and (2) among primary soil particles, in vineyard parcels with different amendments. Amendments were oak-bark, vine-shoots and urban compost. The results were compared with the amount and the distribution of Cu in an unamended calcareous soil. Physical soil fractionations were carried out to separate soil primary particles according to their size and density. Cu has a heterogeneous distribution among soil particle fractions. Two fractions were mainly responsible for Cu retention in soils: the organic debris larger than 50 microns or coarse particulate organic matter (POM) issued from the organic amendments, and the clay-sized fraction < 2 microns. The POM contained up to 2000 mg Cu kg-1 fraction and the clay fraction contained up to 500 mg Cu kg-1 fraction. The clay-sized fraction was responsible for almost 40% of the total amount of Cu in the four parcels. POM was predominantly responsible for the differences in Cu contents between the unamended and the three amended parcels. Our results attested that methods of soil particle-size fractionation can be successfully used to assess the distribution of metal elements in soils.