Advanced solid-state carbon-13 nuclear magnetic resonance spectroscopic studies of sewage sludge organic matter: detection of organic "domains"

Two novel solid-state 13C nuclear magnetic resonance (NMR) spectroscopic techniques, PSRE (proton spin relaxation editing) and RESTORE [Restoration of Spectra via T(CH) and T(1rho)H (T One Rho H) Editing], were used to provide detailed chemical characterization of the organic matter from six Australian sewage sludges. These methods were used to probe the submicrometer heterogeneity of sludge organic matter, and identify and quantify spatially distinct components. Analysis of the T1H relaxation behavior of the sludges indicated that each sludge contained two types of organic domains. Carbon-13 PSRE NMR subspectra were generated to determine the chemical nature of these domains. The rapidly relaxing component of each sludge was rich in protein and alkyl carbon, and was identified as dead bacterial material. The slowly relaxing component of each sludge was rich in carbohydrate and lignin structures, and was identified as partly degraded plant material. The bacterial domains were shown, using the RESTORE technique, to also have characteristically rapid T(1rho)H relaxation rates. This rapid T(1rho)H relaxation was identified as the main cause of underrepresentation of these domains in standard 13C cross polarization (CP) NMR spectra of sludges. The heterogeneous nature of sewage sludge organic matter has implications for land application of sewage sludge, since the two components are likely to have different capacities for sorbing organic and inorganic toxicants present in sewage sludge, and will decompose at different rates.     

Oxytetracycline sorption to organic matter by metal-bridging

The sorption of oxytetracycline to metal-loaded ion exchange resin and to natural organic matter by the formation of ternary complexes between polyvalent metal cations and sorbent- and sorbate ligand groups was investigated. Oxytetracycline (OTC) sorption to Ca- and Cu-loaded Chelex-100 resin increased with increasing metal/sorbate ratio at pH 7.6 (OTC speciation: 55% zwitterion, 45% anion). Greater sorption to Cu- than Ca-loaded resin was observed, consistent with the greater stability constants of Cu with both the resin sites and with OTC. Oxytetracycline sorption to organic matter was measured at pH 5.5 (OTC speciation: 1% cation, 98% zwitterion, 1% anion). No detectable sorption was measured for cellulose or lignin sorbents that contain few metal-complexing ligand groups. Sorption to Aldrich humic acid increased from "clean" < "dirty" (no cation exchange pretreatment) < Al-amended < Fe(III)-amended clean humic acid with K(d) values of 5500, 32000, 48000, and 250000 L kg(-1) C, respectively. Calcium amendments of clean humic acid suggested that a portion of the sorbed OTC was interacting by cation exchange. Oxytetracycline sorption coefficients for all humic acid sorbents were well-correlated with the total sorbed Al-plus-Fe(III) concentrations (r(2) = 0.87, log-log plot), suggesting that sorption by ternary complex formation with humic acid is important. Results of this research indicate that organic matter may be an important sorbent phase in soils and sediments for pharmaceutical compounds that can complex metals by the formation of ternary complexes between organic matter ligand groups and pharmaceutical ligand groups.     

Molecular-level investigation of monoaromatic compound sorption to suspended soil particles by deuterium nuclear magnetic resonance

Molecular-level sorption behavior of monoaromatic compounds in suspensions of water-dispersable clay components was studied by measuring 2H nuclear magnetic resonance (NMR) spin-spin relaxation times (T2). In general, decreased T2 values indicate stronger solute-sorbent interactions and increased sorption of the solute. A decreasing trend for T2 values in the order benzene > fluorobenzene > toluene (-C6D5 moiety) was observed, which was probably caused by the hydrophobic effect. The T2 values for benzene and the -C6D5 moiety of toluene increased with increasing pH, whereas the trend with pH was much weaker and less consistent for fluorobenzene and the methyl group of toluene. Conversely, no clear relationship was found between T2 values and pH for dichloromethane. These contrasting results cannot be explained by the pH-dependent self-assembly and hydrophobicity of humics. Instead, directed specific forces, including hydrogen bonding, cation-pi interactions, and aromatic-aromatic interactions, are proposed between the benzene ring of monoaromatic solutes and soil organic matter (SOM). Substituents of benzene affect these interactions by varying the pi electron density. When the soil fraction was treated with NaOH to remove humic and fulvic acids, T2 values for the different monoaromatic solutes were surprisingly lower compared with those for the untreated soil fraction. This result is probably caused by the increased ratio of solutes adsorbed to "hard" or "glassy" SOM components, which leads to less mobile sorbed solute molecules, after removing NaOH-extractable humics that contain more "soft" or "rubbery" SOM components.     

Changes in the nature of sewage sludge organic matter during a twenty-one-month incubation

Six sewage sludges from five sewage treatment plants in Australia were incubated for up to 21 months. Carbon losses at the end of the 21-mo incubation varied substantially. The remaining organic matter was isolated by treatment with hydrofluoric acid (HF) and characterized using a range of solid-state (13)C nuclear magnetic resonance (NMR) spectroscopic techniques. By every measure (signal distribution in cross polarization [CP] and Bloch decay [BD] spectra, carbon NMR observability determined by spin counting, and the appearance of proton spin relaxation editing subspectra), the chemical composition of the residual organic matter appeared to be little different from that of the original sludges, even for those sludges that experienced the greatest carbon losses. Importantly, these NMR properties distinguish sewage sludge organic matter from soil organic matter. Thus, it should be possible to follow the decomposition of sewage sludge organic matter applied to soils in the field using solid-state (13)C NMR spectroscopy.     

Kerogen in aquifer material and its strong sorption for nonionic organic pollutants

Sorption of organic pollutants by subsurface materials has been found to not only correlate with the total organic carbon (TOC) content, but also depend on the types of soil and sediment organic matter (SOM). Characterization of geochemically heterogeneous SOM is key to elucidating sorption mechanisms and predicting pollutant transport in ground water systems. In this study, kerogen, a nonextractable organic material, was isolated with an acid demineralization procedure from a sandy aquifer material (Borden, Ontario, Canada) having a TOC content of approximately 0.021% (w/w). Petrographical examinations reveal that the kerogen has three major types of macerals including bituminite (Kerogen Type I and II), vitrinite (Type III), and fusinite (Type IV or charred kerogen). The solid-state 13C nuclear magnetic resonance (NMR) spectrum shows two dominant peaks, aliphatic and aromatic carbons, for the isolated material. Sorption isotherms measured using phenanthrene, naphthalene, 1,3,5-trichlorobenzene (TCB), and 1,2-dichlorobenzene (DCB) as sorbates showed that both the isolated kerogen and the original sand exhibited nonlinear sorption and that the phenanthrene and TCB isotherms measured for the kerogen material are more nonlinear than the respective isotherms for the original sand. The single-point organic carbon--normalized sorption capacity measured for the isolated kerogen can be several times greater than that measured for the original sand for a given sorbate. The study suggests that kerogen plays a major role in overall sorption isotherm nonlinearity and could yield higher-than-predicted sorption capacities for the subsurface material even though the content of this organic material is very low.     

Measuring sorption of hydrophilic organic compounds in soils by an unsaturated transient flow method

Determination of sorption of hydrophilic, weakly sorbing organic compounds in soil by conventional batch methods using a slurried suspension is often prone to considerable errors because small changes in the solution concentration on equilibration must be accurately determined. This difficulty is exacerbated for compounds susceptible to degradation, which also decreases the solution concentration. The objective of this study was to determine sorption of hydrophilic pesticides by applying an unsaturated transient flow method, which enables determination of sorption at sufficiently small solution to soil ratios. The method makes use of piston-like displacement of the antecedent solution in equilibrium with sorbed phase when pesticide-free water is infiltrated into a soil column spiked with a pesticide. Pesticide sorption and the solution concentration are inferred from a plot of total pesticide content per unit mass of soil vs. water content in a region where the antecedent solution is accumulated. Thus, extraction of solution from relative dry soil is unnecessary. We tested this method for two hydrophilic pesticides, monocrotophos [dimethyl (E)-1-methyl-2-(methyl-carbamoyl) vinyl phosphate] and dichlorvos (2,2-dichlorovinyl dimethyl phosphate). The sorption coefficient, K(d), obtained for monocrotophos was slightly lower than that by batch method (K(d) = 0.10 vs. 0.19 L kg(-1)), whereas for dichlorvos, a compound highly susceptible to degradation, the unsaturated flow method yielded a much smaller K(d) (0.19 vs. 3.22 L kg(-1)). The K(d) values for both compounds were consistent with the observed retardation in the pesticide displacement in the columns. The proposed method is more representative of field conditions and particularly suitable for weakly sorbing organic compounds in soils.     

Studying organic matter molecular assemblage within a whole organic soil by nuclear magnetic resonance

This work shows the applicability of two-dimensional (2D) (1)H-(13)C heteronuclear correlation (HETCOR) nuclear magnetic resonance (NMR) spectroscopy to the characterization of whole soils. A combination of different mixing times and cross polarization (CP) methods, namely Lee-Goldberg (LG)-CP and Ramp-CP are shown to afford, for the first time, intra- and inter- molecular connectivities, allowing for molecular assemblage information to be obtained on a whole soil. Our results show that, for the brackish marsh histosol under study, two isolated domains could be detected. The first domain consists of O-alkyl and aromatic moieties (lignocellulose material), while the second domain is comprised of alkyl type moieties (cuticular material). The role of these domains is discussed in terms of hydrophobic organic compound sorption within soil organic matter (SOM), including the possible effects of wetting and drying cycles.     

Phenanthrene sorption to structurally modified humic acids

Several studies emphasize the importance of soil organic matter characteristics in hydrophobic contaminant sorption and outline the strong dependence of sorption on organic matter aromaticity. In this study, the role of organic matter aromaticity in phenanthrene sorption was investigated using humic acids (HAs) from compost, peat, and soil that were structurally modified by bleaching, hydrolysis, oximation, and subcritical water extraction. The HAs were characterized with cross polarization magic angle spinning carbon-13 nuclear magnetic resonance (CPMAS 13C NMR) spectroscopy and used in batch equilibrations with phenanthrene. Bleaching substantially reduced the aromaticity of the samples whereas the other treatments increased the relative aromaticity. Phenanthrene sorption increased, even though there was a substantial reduction in sorbent aromaticity with some samples. The HAs that exhibited comparable CPMAS 13C NMR spectra and aromaticity did not behave similarly with respect to phenanthrene sorption. When the sorption data (K(oc) values) were correlated to sample aromaticity, the correlation coefficients (r2) did not exceed 0.39. Comparisons with the atomic H to C ratio provided slightly better r2 values (up to 0.54). This study demonstrates that macroscopic sorbent characteristics could not explain the observed phenanthrene sorption coefficients, aliphatic structural components of HAs can contribute appreciably to phenanthrene sorption, and organic matter physical conformation may regulate access to organic matter structures. Therefore, the use of only macroscopic sorbent properties, such as aromaticity, to predict and rationalize sorption values cannot solely be used to explain the behavior of organic contaminants in soil environments.     

Sorption dynamics of organic and inorganic phosphorus compounds in soil

Phosphorus retention in soils is influenced by the form of P added. The potential impact of one P compound on the sorption of other P compounds in soils has not been widely reported. Sorption isotherms were utilized to quantify P retention by benchmark soils from Indiana, Missouri, and North Carolina when P was added as inorganic P (Pi) or organic P (beta-D-glucose-6-phosphate, G6P; adenosine 5'-triphosphate, ATP; and myoinositol hexaphosphate, IP6) and to determine whether soil P sorption by these organic P compounds and Pi was competitive. Isotherm supernatants were analyzed for pH and total P using standard protocols, while Pi and organic P compounds were assayed using ion chromatography. Under the controlled conditions of this study, the affinity of all soils for P sources followed the order IP6 > G6P > ATP > Pi. Each organic P source had a different potential to desorb Pi from soils, and the order of greatest to least Pi desorption was G6P > ATP > IP6. Glucose-6-phosphate and ATP competed more directly with Pi for sorption sites than IP6 at greater rates of P addition, but at the lesser rates of P addition, IP6 actually desorbed more Pi. Inositol hexaphosphate was strongly sorbed by all three soils and was relatively unaffected by the presence of other P sources. Decreased total P sorption due to desorption of Pi can be caused by relatively small additions of organic P, which may help explain vertical P movement in manured soils. Sorption isotherms performed using Pi alone did not accurately predict total P sorption in soils.     

Sorption and desorption of naphthalene by soil organic matter: importance of aromatic and aliphatic components

Nonlinear isotherm behavior has been reported for the sorption of hydrophobic organic compounds (HOCs) in soil organic matter (SOM), but the exact mechanisms are unknown. Our objective was to provide insight into the sorption mechanism of HOCs in SOM by studying the sorption-desorption processes of naphthalene in a mineral soil, its humic fractions, and lignin. Additionally, humin and lignin were used for studying the effects of temperature and cosolvent on HOC sorption. All isotherms were nonlinear. The humin and lignin isotherms became more linear at elevated temperatures and with the addition of methanol indicating a condensed to expanded structural phase transition. Isotherm nonlinearity and hysteresis increased in the following order: soil humic acid (HA) < soil < soil humin. Of the samples, aliphatic-rich humin exhibited the largest degree of nonlinearity and had the highest sorption capacity for naphthalene. High nonlinearity and hysteresis in humin were most likely caused by its condensed structure. A novel aliphatic, amorphous condensed conformation is proposed. This conformation can account for both high sorption capacities and increased nonlinearity observed for aliphatic-rich samples and can explain many sorption disparities discussed in the literature. This study clearly illustrates the importance of both aliphatic and aromatic moieties for HOC sorption in SOM.     

Sorption of aromatic ionizable organic compounds to montmorillonites modified by hexadecyltrimethyl ammonium and polydiallyldimethyl ammonium

Environmental residues of aromatic ionizable organic compounds (AIOCs) have received considerable attention due to their potential human health and ecological risks. The main objective of this study was to investigate the key factors and mechanisms controlling sorption of a series of anionic and zwitterionic AIOCs (two aromatic sulfonates, 4-methyl-2,6-dinitrophenol, tetracycline, sulfamethoxazole, and tannic acid) to montmorillonites modified with hexadecyltrimethyl ammonium (HDTMA) and polydiallyldimethyl ammonium (PDADMA). Compared with naphthalene (a nonpolar and nonionic solute), all AIOCs showed stronger sorption (the sorbent-to-solution distribution coefficient was in the order of 10-10 L kg) to the two organoclays in spite of the much lower hydrophobicity, indicating the predominance of electrostatic interaction in sorption. The proposed electrostatic mechanism of the tested AIOCs was supported by the pH dependency of sorption to the two organoclays. The two organoclays manifested weaker sorption affinity but faster sorption kinetics for bulky AIOCs than commercial activated carbon, resulting from the high accessibility of sorption sites in the open, ordered clay interlayer. The findings of this study highlight the potential of using HDTMA- and PDADMA-exchanged montmorillonites as effective sorbents for AIOCs in water and wastewater treatments.     

Sorption interactions between imazaquin and a humic acid extracted from a typical Brazilian oxisol

Soil sorption of most hydrophobic organic compounds (e.g., nonpolar pesticides) is directly related to soil organic matter (SOM) content. Humic substances are the major SOM components, containing carboxylic, phenolic, amine, quinone, and other functional groups, and specific structural configurations. In this paper, sorption interactions between imazaquin (2-[4,5-dydro-4-methyl-4-(1-methylethyl)-5-oxo-1H- imidazol-2-yl]-3-quinoline-carboxylic acid) herbicide (IM) and a humic acid (HA) extracted from a typical Brazilian Oxisol were studied with electron paramagnetic resonance (EPR) and Fourier-transform infrared (FTIR) spectroscopic techniques. A polarographic technique was used to quantify sorption. The IM amount sorbed on the HA was much higher than that on the whole soil within the pH range studied, emphasizing the prominent role played by SOM on IM sorption. Moreover, IM sorption increased as the soil-solution pH decreased. This enhancement in sorption was attributed to the hydrophobic affinity of the herbicide by the HA and to the electrostatic interaction between the protonated quinoline group of IM and the negative sites of the HA. Hydrophobic regions in the HA's interior at low pH (< 5.0) were recently demonstrated by an EPR detectable spin-label molecule. The FTIR and EPR spectroscopy and polarography data indicated weak interaction between IM and the soil and its HA, involving hydrogen bonding, proton transfer, and cation exchange (at low pH), and mainly hydrophobic interactions. However, no strong reaction mechanism, such as charge transfer, was involved. In addition, this research suggested that soil amendment with organic material might increase magnitude of IM sorption, consequently avoiding leaching and carryover problems usually found for mobile and persistent herbicides such as imazaquin.     

Size distribution of organic matter and associated propiconazole in agricultural runoff material

Sorption and desorption characteristics of propiconazole (1-[[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl]methyl]-1H-1,2,4-triazole) to different particle/aggregate-size fractions of agricultural runoff material were investigated. Emphasis was put on clay and colloidal size fractions to evaluate their role as potential sorbents and carriers for this pesticide. The runoff material was separated into size fractions ranging from 2 mm to ca. 15 nm by wet sieving, sedimentation, centrifugation, and membrane ultrafiltration. Each fraction was characterized by its organic C content and C/N ratio. Distinctive sorption properties of clay-sized particles and colloids were investigated. The obtained size fractions differed significantly in their organic C concentration, C/N ratio, and sorption properties to propiconazole. Organic matter was mainly associated in aggregates >2 microm. Binding of propiconazole to this coarse fraction made up 80% of the sorbed propiconazole. The distribution coefficient between solid and aqueous phases increased with decreasing particle size. The colloidal fraction (<0.16 microm) exhibited the highest sorbtivity, with a distribution coefficient of 113 L kg(-1), which was more than four times higher than that in the bulk sample (27 L kg(-1)). The fraction <2 microm represented 8% of the total sample weight, but contributed to 20% of the sorbed propiconazole. Strong hysteresis was observed for the sorption-desorption of propiconazole on the runoff material. Under dilution very little sorbed propiconazole will be released into the water phase. Due to its high sorbtivity and mobility and the strong sorption-desorption hysteresis, particles in the fraction <2 microm can be important carriers of propiconazole in runoff suspensions with high sediment load.     

Paramagnetic effects on solid state carbon-13 nuclear magnetic resonance spectra of soil organic matter

The effects of paramagnetic species on solid state 13C nuclear magnetic resonance (NMR) spectra were quantified in a series of doping experiments. The degree of signal loss caused by paramagnetic metals was shown to depend not only on the quantity, but also on the nature of the paramagnetic species, as well as the intimacy of contact with the organic substrate and the type of NMR experiment. Two mechanisms of signal loss were distinguished--signal loss via loss of magnetic field homogeneity, which affects all 13C nuclei in a sample, and signal loss via interaction between electronic and nuclear spins, the effects of which were localized to the close environment of the paramagnetic species. Loss of field homogeneity is important for manganese species, but not for copper species, and is equally important for both cross polarization and Bloch decay experiments. The interaction between electronic and nuclear spins is highly dependent on the spin-lattice relaxation rate constant of the free electron (T1e), as cations with very short T1e values (e.g., Pr3+) cause less signal loss than cations with longer T1e values (e.g., Cu2+, Mn2+). Cross polarization spectra are shown to be more susceptible than Bloch decay spectra to this mechanism of signal loss. Signal loss and increased relaxation rates brought about by paramagnetic species can be used to provide information on soil organic matter (SOM) heterogeneity in the submicron range. This is demonstrated for SOM doped with paramagnetic cations where selective signal loss and increased relaxation rates are used to determine the nature of cation exchange sites.     

Interactions of organic compounds with wastewater dissolved organic matter: role of hydrophobic fractions

The role of structural fractions of dissolved organic matter (DOM) from wastewater in the sorption process of hydrophobic organic compounds is still not clear. In this study, DOM from two wastewater treatment plants (Lachish and Netanya, Israel) was fractionated to hydrophobic acid (HoA) and hydrophobic neutral (HoN) fractions. The fractions were characterized and their sorptive capabilities for s-triazine herbicides and polycyclic aromatic hydrocarbons (PAHs) were studied. For all sorbates, the binding to the HoN fractions was much higher than to HoA fractions. The HoA fractions were more polar than the HoN fractions, containing a higher level of carboxylic functionalities. However the higher binding coefficients of atrazine (2-chloro-4-ethylamine-6-isopropylamino-s-triazine) and ametryn [2-(ethylamino)-4-isopropylamino-6-methyl-thio-s-triazine] obtained for the HoN fractions suggest that their sorption is governed by hydrophobic-like interactions rather than H bonding. The values of binding coefficients of PAHs measured for the HoN fractions were within the range reported for humic acids and much higher than other fractions, suggesting that this fraction plays an important role in the overall sorption of these compounds by DOM. Higher sorption coefficients were measured for the Netanya DOM sample containing higher level of hydrophobic fractions (HoA + HoN) than the Lachish DOM, suggesting that the sorption of hydrophobic organic compounds by DOM is governed by the level of these structural substances. The evaluation of mobility of organic pollutants by wastewater irrigation requires not only assessment of the total carbon concentration but also, more importantly, the content of the hydrophobic fractions.     

A model for linking the effects of parathion in soil to its degradation and bioavailability kinetics

Parathion is an insecticide of a group of highly toxic organophosphorus compounds. To investigate the dissipation and toxicological impact of parathion [O,O-diethyl O-(4-nitrophenyl) phosphorothioate] and its highly toxic metabolite, paraoxon, soil laboratory experiments were conducted in columns during a 19-d experiment under variably saturated conditions. Water and pesticide transport, sorption, and biodegradation of parathion were measured in three soil pools (soluble phase, weakly and strongly sorbed phases) using C-labeled pesticide. The effects of parathion and its metabolite on the mobility of soil nematodes were observed and then modeled with an effective variable, which combined pesticide concentration and time of application. Results showed that parathion was highly sorbed and slowly degraded to a mixture of metabolites. The parent compound and its metabolites remained located in the top 0.06-m soil layer. A kinetic model describing the sorption, biodegradation, and allocation into different soil pools of parathion and its metabolites was coupled with heat and water transport equations to predict the fate of parathion in soil. Simulated results were in agreement with experimental data, showing that the products remained in the upper soil layers even in the case of long-term (11-mo) simulation. The strongly sorbed fraction may be regarded as a pesticide reservoir that regularly provides pesticide to the weakly sorbed phase, and then, liquid phase, respectively. From both modeling and observations, no major toxicological damage of parathion and paraoxon to soil nematodes was found, although some effects on nematodes were possible, but at the soil surface only (0.01- and 0.02-m depth).     

Sorption of trace metals by standard and micro suction cups in the absence and presence of dissolved organic carbon

Both the bioavailability of a trace metal (TM) in a soil and the risk of leaching to the ground water are linked to the metals concentration in the soil solution. Sampling soil solution by tension lysimetry with suction cups is a simple and established technique that is increasingly used for monitoring dissolved TM in soils. Of major concern, however, is the sorption of TM by the walls of the samplers. Metal sorption by different materials used in suction cups can vary widely, depending also on the chemistry of the soil solution. We compared the sorption of Cu, Zn, Cd, and Pb by different standard-size and micro suction cups in the laboratory at two pH values (4.5 and 7.5 or 8.0) in absence and presence of dissolved organic carbon (DOC). In addition, we investigated the sorption of DOC from different origins by the cup materials. At both pH values, the weakest sorption of all four TMs was exhibited by standard-size suction cups based on nylon membranes and by hollow fibers made from polyvinyl alcohol (PVA). At alkaline pH, borosilicate glass, ceramic materials, and polytetrafluorethylene (PTFE) mixed with silicate were characterized by generally strong sorption of all investigated TMs. In addition, Cu and Pb were strongly sorbed at low pH by PTFE-silicate and a ceramic material used for the construction of standard-size suction cups. On the other hand, sorption of Cu, Zn, and Cd by ceramic capillaries produced from pure aluminum oxide was negligible at low pH. Micro suction cups made of an unknown polymerous tube sorbed Cu strongly, but were well suited to monitor Zn, Cd, and Pb at low pH, and, in the presence of DOC, also at high pH. Major cations (Na+, Mg2+, K+, Ca2+) and anions (Cl-, NO3-, SO4(2-)) were not or very weakly sorbed by all cup materials, except for Mg2+, K+, and Ca2+ by borosilicate glass at pH 7.5. Trace metal sorption by suction cups was generally greatly reduced in the presence of DOC, especially at alkaline pH. The sorption of DOC itself depended on its source. Dissolved organic carbon from leaf litter extracts with a probably large hydrophobic fraction was sorbed more strongly than mainly hydrophilic DOC from a mineral soil solution.     

The role of condensed organic matter in the nonlinear sorption of hydrophobic organic contaminants by a peat and sediments

This study examines the effect of soil organic matter heterogeneity on equilibrium sorption and desorption of phenanthrene, naphthalene, 1,3,5-trichlorobenzene (1,3,5-TCB), and 1,2-dichlorobenzene (1,2-DCB) by soils and sediments. Two estuary sediments, a Pahokee peat (PP; Euic, hyperthermic Lithic Haplosaprist), and two subsamples (base- and acid-treated peat [TP] and acid-treated peat [FP]) of the peat were used as the sorbents. The contents of black carbon particles were quantified with a chemical extraction method. Petrographical examinations revealed the presence of the condensed soil and sediment organic matter (SOM) in Pahokee peat. The Freundlich isotherm model in two different forms was used to fit both sorption and desorption data. The results show that the sorption and desorption isotherms are generally nonlinear and that the apparent sorption-desorption hysteresis is present for phenanthrene and TCB. Detailed analysis of sorption data for the tested sorbent-sorbate systems indicates that black carbon is probably responsible for sorption isotherm nonlinearity for the two sediments, whereas the humic substances and kerogen may play the dominant role in nonlinear sorption by the peat. This investigation suggests that the microporosity of SOM is important for the hydrophobic organic contaminant (HOC) sorption capacity on the peat.     

Using surfactant-modified clays to determine sorption mechanisms for a representative organic base, quinoline

Sorption of a representative ionizable nitrogen heterocycle, quinoline (pKa = 4.92), was investigated to determine the relative contributions of the neutral and protonated species to the overall process. Batch sorption experiments were conducted on surfactant-modified clays that were synthesized from the exchange of hexadecyltrimethylammonium cations for resident sodium cations on a specimen smectite (Swy-2) at 0, 60, 80, and 100% of the clay's cation exchange capacity (CEC). Hexadecyltrimethylammonium exchange creates highly effective organic partitioning domains within the clay interlayers in proportion to their coverage on the exchange complex. The fractionally exchanged clays, therefore, provided discrete exchange and organic partitioning domains for the protonated and neutral species of quinoline. Data were described by a combined Langmuir-linear isotherm that permitted independent characterization of both sorption components. Results indicated that cationic sorption dominated but that the neutral species can contribute substantially given sufficient organic carbon content relative to the CEC and at pH above the pKa of quinoline. The data obtained in this study for quinoline demonstrated that the combined isotherm (including cation exchange and hydrophobic partitioning terms) describes sorption data and compares favorably with the purely empirical Freundlish isotherm.     

Sorption of apolar aromatic compounds to soil humic acid particles affected by aluminum(III) ion Cross-Linking

Sorption of hydrophobic compounds in soils often shows nonlinearity, competition, and hysteresis. Since such behaviors have been associated with organic polymers in glassy state, it has been postulated that some forms of soil humic substances are glassy. The glassy state is favored by properties that decrease the flexibility of macromolecules, such as cross-linking, presence of unsaturated bonds, and high molecular weight. Polyvalent metal ions, which are abundant in soils, may cross-link humic substances by coordinating to multiple functional groups on different strands. Accordingly, we prepared an Al(3+)-cross-linked humic acid (Al-HA) from the H(+) form (H-HA) of a soil humic acid by a flocculation technique that leaves Al ions bound to organic groups. Sorption of naphthalene and 1,2,4-trichlorobenzene (TCB) on H-HA was nonlinear, competitive, and slightly hysteretic, in agreement with previous studies showing glass transition temperatures of humic acids that lie above room temperature. Nonlinearity, competition, and hysteresis were all enhanced in Al-HA, validating the hypothesis that metal ion cross-linking enhances nonideal sorption. Application of a glassy polymer sorption model reveals that cross-linking increases the affinity of solutes for the hole domain relative to the dissolution domain. The results (i) indicate that isolated, purified soil humic acid behaves like a glassy solid, (ii) indicate that metal-ion cross-linking creates a more rigid-chain structure and supports a link between nonideal sorption and the glassy character of soil organic matter, and (iii) underscore the importance of metal ions on humic structure in relation to sorption of hydrophobic organic compounds.