太湖地区典型降雨水稻田径流污染物输出特点及相关性分析

为研究降雨过程中水稻田径流污染物的输出特点及其主要污染物之间的内在关系,在太湖地区何家浜流域划定若干块水稻田作为研究区域,并分别选取单块封闭水稻田沿河岸的直入河点和多块水稻田沿沟渠汇流后的沟渠入河点为采样点,对比封闭小区域和非封闭大区域污染物随降雨径流的输出特点及其相关性。结果表明,降雨引起水田水的扰动,对水田土壤及其污染物只产生间接的扰动或冲刷,而非直接冲刷,因此,不同降雨强度对SS(悬浮态固体)的冲刷并未表现出明显的差异。无论短历时强降雨还是长历时弱降雨,其径流中SS、氮、磷均随降雨历时的延长而降低,其中溶解态氮、磷随降雨历时的变化较小。相比大面积的汇水区域,较小的汇水区域SS峰值点出现的时间更接近降雨峰值点,对降雨的响应时间更短,降雨前期,大汇水区域径流中SS比小汇水区域小很多,而降雨后期要大很多,其主要污染物随降雨历时的延长而降低的规律性更显著,小汇水区域的径流SS和TN(总氮)、TP(总磷)具有很好的线性相关性。     

不透水表面雨水径流污染物冲刷规律研究

针对雨水径流污染冲刷模型中降雨强度与污染物冲刷存在的时间差问题,采用有效降雨强度替代降雨强度,建立了径流污染物冲刷模型,并利用建立的模型对不透水表面雨水径流污染物冲刷进行了模拟。结果表明,模型对SS、COD、TN和TP模拟的相关系数R2平均为0.87、0.81、0.93和0.89,具有较高的模拟精度。SS、COD、TN和TP的冲刷系数分别为0.77、0.66、0.92和0.74 mm-1,TN的冲刷系数略高,但总体相差不大。SS、COD、TN和TP均显示了较强的初期冲刷效应,在有效降雨强度为4 mm时,截留初期雨水径流量的35%~40%,即可控制70%以上雨水径流污染物。建立的模型可应用于研究不透水表面的雨水径流污染物冲刷规律,为雨水径流污染物控制提供理论计算依据。     

西安市城市主干道路面径流初期冲刷效应

以西安市城市主干道南二环太白路高架桥为路面径流采样区域,采用人工等时间间隔采样方法,在桥梁排水立管对2010年9—11月的3场径流事件进行全程采样,测试径流过程SS、COD、溶解性COD、NH3-N、Pb、溶解性Pb、Zn和溶解性Zn的浓度变化,研究路面径流的初期冲刷效应及其影响因素。结果表明,西安市城市主干道路面径流污染严重,降雨数小时后的末期径流仍具有较高的污染水平;径流过程污染物浓度变化规律与其赋存形态有关,SS、COD、Pb等以颗粒态为主的污染物的浓度随雨强变化剧烈波动,NH3-N、溶解态COD、溶解态Zn等以溶解态为主的污染物浓度变化受雨强影响较小,随径流过程呈逐渐减小趋势;路面径流初期冲刷现象并非普遍存在,与污染物的赋存状态和场次降雨特征密切相关,溶解态污染物易于出现初期冲刷现象,颗粒态污染物是否出现初期冲刷与场次降雨特征有关;测试的3场径流事件初期30%的径流携带的SS、COD、溶解性COD、NH3-N、Pb、Zn和溶解性Zn的负荷占场次径流总负荷的比例分别为21.8%～50.0%、25.5%～49.3%、36.3%～52.6%、52.6%～66.7%、26.8%～45.0%、27.2%～63.4%和36.2%～62.6%,表明仅对初期径流进行治理无法实现对西安市路面径流污染的有效控制。     

合流制排水系统降雨径流初期冲刷效应

通过对昆明主城区3个集水区合流制排水系统10次降雨径流过程水质水量的监测,计算了污染物的次降雨平均浓度(EMC),并采用无因次累积负荷体积分数曲线(M(V)曲线)和初期冲刷系数方法对初期冲刷现象进行了探讨。结果表明:(1)对于同一个常规污染指标,不同集水区的EMC平均值没有较明显差异,但都表现出较高浓度的污染特征。不同集水区总悬浮颗粒物(TSS)、COD、TN和TP的EMC平均值分别为140.18~174.11、144.65~161.78、21.44~23.18、1.80~2.35mg/L。(2)3个集水区所有观测降雨事件中,TP、TN、COD和TSS的初期30%径流量所对应的污染物累积负荷量(FF30)平均值分别为38.7%、37.1%、40.7%、44.6%;TSS和COD的初期冲刷强度明显较TP和TN变化更剧烈,不同污染物初期冲刷强度依次为TSSCODTPTN。(3)对于合流制排水系统,在区域特征相近情况下,汇水面积越小则初期冲刷效应越显著。而当汇水面积大到一定程度时,不同集水区之间初期冲刷强度没有显著差异。(4)降雨量、平均雨强和最大雨强与合流制排水系统的初期冲刷强度呈显著的正相关性,是影响其初期冲刷的重要水文参数;降雨历时和前期晴天与其初期冲刷强度没有显著相关性,两者对初期冲刷无明显影响。     

深圳大工业区初期雨水水质污染特征研究

为研究深圳大工业区初期雨水水质污染特征,分别选择深圳大工业区6个功能区作为监测点监测初期雨水中污染物浓度。结果表明:深圳大工业区居住区和商业区初期雨水COD污染最严重,COD最高分别达到1 467.00、1 333.00mg/L;出口加工区及高科技工业和现代物流业区域的初期雨水TN、TP浓度略低于其他区域。初期雨水中COD、氨氮、TP浓度与SS浓度存在线性相关关系,而TN浓度与SS浓度的线性相关性较差,不同区域随降雨历时变化规律波动各异。深圳大工业区附近河流SS、COD、TN、氨氮、TP浓度受初期雨水影响较大。     

建筑屋顶雨水径流初期冲刷效应研究

以无量纲化后的雨水径流污染物和径流输送量为基础,通过引入间隙函数,建立了雨水径流污染物的初期冲刷效应定量评价公式,对建筑屋顶雨水初期冲刷现象进行了研究.结果表明:(1)建筑屋顶雨水径流污染物浓度总体上呈现出前期高于后期的现象,且污染物浓度较低,建筑屋顶雨水利用可作为雨水利用的优先方向.(2)间隙函数存在峰值区域,峰值区...     

道路径流SS和COD污染特征及出流规律

选择芜湖市火车站点进行长期监测,采集降雨7次;同时选择5个不同功能区,采集典型降雨1次。探讨了道路径流中总固体悬浮物(SS)和化学需氧量(COD)的污染特征、影响因素及出流规律,结果表明,7次降雨事件SS和COD平均值范围分别为198～1 529 mg/L和66～367 mg/L。SS和COD污染较为严重。SS在不同功能区中大小顺序为:工业区>居民区>商业区>交通区>文教区,总COD大小顺序为:工业区>交通区>居民区>商业区>文教区,溶解态COD大小顺序为:工业区>交通区>商业区>文教区>居民区,颗粒态COD大小顺序为:工业区>居民区>交通区>文教区>商业区。工业活动对地表径流SS和COD含量影响最大。SS受降雨历时影响较大,溶解态COD受平均雨强影响较大,颗粒态COD受最大雨强影响较大。不同降雨强度下,SS、溶解态COD及颗粒态COD的出流规律不同,降雨强度对径流初期效应的影响显著。     

雨水收集系统结合自循环系统下的景观湖体氮磷特征

为评估采用雨水作为城市景观湖体补充水源的富营养化发生风险,以天津文化中心景观湖为研究案例,分析了其典型的2套运营系统:雨水收集系统(雨水经沉淀井、蓄水模块和垂直潜流湿地进入景观湖)和中心湖水体的循环及净化系统(湖水抽排至垂直潜流湿地再进入景观湖)中景观湖的氮磷浓度变化规律。采用2015年3—10月的长期监测,研究湖中氮磷营养盐的时间变化趋势以及形态变化规律,提取影响湖中氮磷浓度的因素。结果表明:2015年3—10月景观湖中总氮和总磷平均浓度分别为(1.551±0.491)mg·L~(-1)和(0.058±0.029)mg·L~(-1),溶解态氮和磷分别占71.7%和50%,系统运行稳定时总氮和总磷浓度主要分布在1.0~1.3 mg·L~(-1)和0.029~0.05 mg·L~(-1)之间;总体上,溶解态氮为湖水中氮存在的主要形式,而磷则主要以颗粒态形式存在,在降雨条件下,部分污染物随着降雨冲刷进入湖体,因此景观湖中溶解态磷的浓度增高;湿地是否稳定运行是影响景观湖中总氮、溶解态氮以及总磷浓度的因素,而降雨条件是影响景观湖体的总磷浓度以及溶解态磷浓度的因素;景观湖的富营养化风险较低,降雨期间进入湖体的溶解态磷是最大的风险因子。     

沸石渗滤床在城市初期雨水径流污染控制的应用研究

根据城市初期雨水径流的污染负荷初始冲刷效应以及主要污染物COD和N/P与SS成线性相关性的污染特点,对初期雨水的主要污染物COD和N/P开展了控制技术研究。以示范工程为基础,研究城市初期雨水径流污染控制的强化处理技术即沸石渗滤床技术,运行结果表明,对NH3-N、TP、COD都有较好的去除效果,其中对NH3-N的去除效果较为明显,进水氨氮浓度在2～5 mg/L,出水都能达到地表IV类水标准(NH3-N≤0.5 mg/L)。     

不同地表雨水径流冲刷特性分析

选择北京市某城区典型地表(校园、自行车道、商业街和高架桥)的雨水径流作为研究对象,系统分析了不同地表雨水径流的冲刷特性。分析结果表明:不同地表初期冲刷现象都比较明显,控制不同地表20%的初期雨水可以削减污染物总量的40%～60%,高架桥初期雨水径流中COD、SS和TP浓度最高,校园初期雨水径流中TN浓度最高。不同地表雨水径流的水质优劣顺序为:校园>商业街>自行车道>高架桥。校园和自行车道在整个降雨过程中D50和D90粒径大小相近,分别为30μm和50μm左右,且变化幅度都较小。高架桥和商业街在雨水径流初期D50和D90粒径有明显减小,但后期均出现较大幅度的波动,其粒径明显大于校园和自行车道。上述研究成果对于城市不同地表雨水径流污染控制和场地开发具有重要意义。     

Optimization of Height of Release of Air Pollutants

A number of key projects in the Environmental Protection Agency (EPA) particulate R&;D program having applicability to industry are presented. For electrostatic precipitators (ESP) there is presented the result of work on large diameter discharge electrodes which provide a decrease in penetration of up to a factor of 4 when compared to conventional small diameter electrodes. Also discussed is the multistage ESP which provides a collection efficiency that would require a collecting plate area 4 or 5 times larger with conventional ESP technology. The E-SOX technology makes use of the multistage concept to free up space in the ESP for SO₂ removals of up to 90%. Electrostatically augmented fabric filtration provides a reduction in pressure drop of about 5 0% as compared to conventional fabric filtration. Wind tunnel modeling of windbreaks for material storage piles indicates a potential for providing engineering design data that would allow significant emission reduction caused by wind erosion     

Investigation of the characteristics of the reflectivity of clouds

This paper investigates some of the reflectivity characteristics that clouds (when modelled as solid bodies) must exhibit to be compatible with observations that the reflecting surface of a cloud (i) appears almost equally bright across its face, (ii) is brightest when the cloud is opposite to the Sun but decreases in brightness as the cloud moves to other positions and (iii) increases in brightness with increasing optical thickness of the cloud in the observer's line of sight. These observations, respectively, are shown to imply that the peak value of the bidirectional total reflectivity from a cloud surface (i) increases in inverse proportion to the cosine of the angle between the Sun and the normal to the cloud surface, as the incident angle increases, (ii) appears to be directed back in the direction of the incident radiation, and (iii) increases as optical thickness of the cloud in the observer's line of sight increases. The results could have application in many fields (e.g. modelling diffuse radiance distributions for cloudy skies).     

实验室质量管理体系内部审核的实施

在实施ISO／IEC17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核实施阶段的关键环节，提出召开首次会议、收集审核证据、确定审核发现和召开末次会议的技术方法，对提高内部审核的质量和有效性、获得可靠的审核结论具有重要意义。     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

扬中生态环境建设的思考与实践

结合扬中生态环境的基本情况和存在的不足，进行了具体分析，对扬中未来生态建设的发展方向提出了建议及实施措施。     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

Comparison of methods for evaluation of activity of photocatalytic films

Objective

This work aims to investigate the correlation between the photocatalytic activity determined by methylene blue bleaching (DIN 52980), stearic acid degradation, and degradation of acetone in gas phase.

Method

The photocatalytic TiO₂ coatings included in this investigation ranged from thin commercially available coatings (Activ^TM and BioClean^TM) and ready to use suspensions (Nano-X PK1245) to lab-produced PVD and sol?Cgel coatings. XRD analysis of the photocatalytic coatings showed that all the coatings consisted of nanocrystalline anatase, although the thickness and porosity varied considerably.

Results

The study showed that the reproducibility of the activity measurements was good. However, more importantly, the investigation showed that there is a good correlation between the activities determined by the different methods even though the characteristics of the photocatalytic coatings and the organic probe molecules varied considerably.

Conclusion

The overall findings of this work suggest that there is a good correlation between the investigated methods. These results are promising for the future work concerning standardization of methods for determination of the activity of photocatalytic films.     

Impact of overexploitation of shellfish: northeastern coast of India

India has a very extensive coastline of about 7515 km, rich in diverse living resources. These resources continue to deteriorate with rampant harvesting or are altered for other uses such as aquaculture and fisheries. The present paper deals with degrading coastal habitats in northeastern India, and projects the intensity of the stress arising from the collection of tiger prawn seeds (Penaeus monodon) for aquacultural farms and molluskan shells for poultry feed and edible lime. Indiscriminate exploitation of these resources leads to a heavy reduction of the species concerned and other associated marine communities. The magnitude of such destruction has been quantified. The impacts of biodiversity loss and their after-effects on the ecobalance of this coastal system have become a matter of great concern to ecologists to maintain security and sustainability. The authors propose a public awareness program on themes relating to the importance of biodiversity for human livelihoods.