Biomonitoring of polychlorinated byphenyls contamination in the supralittoral environment using the sandhopper Talitrus saltator (Montagu)

We evaluated the use of Talitrus saltator as biomonitor of polychlorinated byphenyls (PCBs) contamination of the supralittoral zone of Mediterranean sandy shores, an area not yet investigated about the presence of these pollutants. Twenty of 22 PCB congeners analysed were detected and quantified in sand and sandhoppers' samples collected in 6 different sites along the Tyrrhenian coast of Central Italy. Among the congeners analysed, PCB 153 and PCB 138 were the most abundant both in amphipods and sand samples and, regarding the congener pattern analysis, hexa-, hepta- and penta-PCBs were the most abundant congeners in sandhoppers. Though hydrophobic compounds, such as PCBs, bind strongly to sand and sediments, PCB concentrations were higher in T. saltator than in the sand revealing a good ability of this species to accumulate this class of contaminants. The concentration of each PCB congener recorded in tissues of sandhoppers showed significant differences among sampling sites revealing a good ability of these species to accumulate PCBs at different concentrations depending on the contamination levels of the sampling site. Therefore, our results suggest the possible utilisation of T. saltator as a biomonitor of PCB contamination of the supralittoral zone of Mediterranean sandy shores.     

Polycyclic aromatic hydrocarbons in soils around Guanting Reservoir,Beijing, China

The concentrations of 16 polycyclic aromatic hydrocarbons (∑ 16PAHs) were measured by gas chromatography equipped with a mass spectrometry detector (GC-MS) in 56 topsoil samples around Guanting Reservior (GTR), which is an important water source for Beijing. Low to medium levels of PAH contamination (mean=394.2±580.7 ng g^?1 dry weight (d.w.)) was evident throughout the region. In addition, localised areas of high PAH contamination near steel and cement factories were identified, with ∑ 16PAHs concentrations as high as 4110 ng/g, dry weight (d.w.). There was a significant positive correlation (r²=0.570, p<0.01) between total organic carbon content and ∑ 16PAHs concentrations. Phenanthrene was the predominant compound, accounting for 27.2% of the ∑ PAH concentration, followed by chrysene>pyrene>benzo[a]anthracene≈ benzo[b]fluoranthene≈ benzo[a]pyrene. Four-ring PAH homologues (39%) were dominant. The higher proportion of 4–6 ring homologues, molecular indices, and the spatial distribution of PAH indicated that industrial discharges, incineration of wastes and traffic discharges were the major sources of soil PAHs around the water reservoir.     

Ökotoxikologische Bioindikation

Atmospheric heavy metals, (Pb, Cd, Cu, Zn), PAHs, and PCBs, depositions were monitored in scots pine needles during a monitoring network programme (Monitoring Programme Natural Budget Berlin and Environs) in 1991 in the city of Berlin, and the surrounding rural areas of Brandenburg (Germany). The total area of the network covered 3,000 km². The passive monitoring technique is based on the fact that the concentrations of heavy metals, PAH’s and PCB’s in the needles are closely correlated to atmospheric depositions/emissions. The objectives of the project were to characterize qualitatively and quantitatively the regional atmospheric deposition patterns of heavy metals, PAH’s and PCB’s in rural and polluted urban areas of Berlin and Brandenburg. The indication of the locations which could be characterized as heavy metals, PAH and PCB pollution sources was also targetted in this investigation. After conclusion, comparison with similar studies conducted in different parts of Germany and Europe would be possible. The regional background deposition levels showed different distribution patterns. The lead and PAH concentrations in the pine needles were closely correlated to the locations of combustion sources petrol, oil, brown coal and heavy traffic activities. The PCB and cadmium concentration levels in the pine needles represented a more ubiquitous distribution pattern.     

Seasonal and spatial character of PCBs in a chemical industrial zone of Shanghai,China

As one of China’s great metropolises, Shanghai is suffering from the impact of manufacture and the use of chemical industrial products, and it faces serious pollution from polychlorinated biphenyls (PCBs). Therefore, in this study, in order to assess the seasonal and spatial character of contamination from chemical industrial zones, the concentrations of PCBs have been measured in various environmental media, including soil, leaves, and atmospheric particulate samples collected in a chemical industrial zone of Shanghai and compared with samples from presumably unpolluted sites of rural areas. In soils, the PCB concentrations ranged from 0.5 ng g⁻¹ (unpolluted site) to 586.85 ng g⁻¹ (chlor-alkali industry site). The concentrations of PCBs in evergreen leaves ranged from 0.3 ng g⁻¹ to 32.46 ng g⁻¹, and more chlorinated biphenyls congeners, such as penta-biphenyls and hexa-biphenyls, were the dominant contributors in winter and spring. Seasonal differences and the constitution patterns of congeners might be affected by the temperature and industrial activities. The PCB concentrations in the leaves of deciduous trees increase over time as the leaves grow. The PCB concentration in atmospheric particulates was in the range of 9.22–14.15 × 10³ pg m⁻³, which might be the result of influence from climate and industrial activities. The relativity of PCB contents among the environmental media was discussed. The results in this paper provide an important profile of the current contamination status of a key chemical industrial zone in China.     

Coplanare polychlorierte Biphenyle (PCB) in den Oberböden Hamburgs

Goal and Scope

In topsoil samples of areas with different land use within the agglomeration of Hamburg, the coplanar polychlorinated biphenyls PCB 77, 126 und 169 were determined to estimate the importance of coplanar PCBs in urban soils. Proportions relative to Balischmiter-PCBs (PCB 28, 52, 101, 138, 153 and 180) and PCDD/F concentrations were examined.

Methods

Soil samples were taken from different depths (litter horizon, 0–10 cm, 0–30 cm) at 24 different sites within the State territory of Hamburg. Coplanar PCBs, Ballschmiter-PCBs and PCDD/Fs were analysed by GC-MS-coupling in the soil fraction <2 mm. Congener distributions are discussed with respect to contamination sources.

Results and Conclusion

Land use and position of soil sample areas are only of subordinate importance for coplanar PCB concentration of the soil samples. The industrial centre of Hamburg (including harbour) shows higher contamination concentrations than the suburban areas. In levels, patterns and relative proportion to PCDD/F concentrations, the samples from dredging material disposal fields differ from all other samples. Calculation of coplanar TEQs related to total TEQs shows a contribution to total TEQs of 11–32% for the background (non dredging material influenced) samples.

Recommendation and Perspective

Estimation of coplanar PCB concentrations by determining Ballschmiter-PCB concentrations in top soil samples does merely work at samples which contamination is caused by the use of commercial PCB mixtures. Rating samples by TEQ concentrations, an increase of TEQs up to 30%, due to coplanar PCBs, should be reckonned. These considerations should be reason for extending the usual PCB determinations of Ballschmiter-PCBs to coplanar PCBs in more cases than is the general practice today.     

Distribution of polychlorinated dibenzo-p-dioxins,polychlorinated dibenzofurans,dioxin-like polychlorinated biphenyl and polycyclic aromatic hydrocarbons in the sediment of Temsah lake,Suez Canal,Egypt

Lake Temsah is one of the main wetlands in the Suez Canal region, and the main source for fish for the area. The lake is the end-point of several wastewater effluents. In the present study, residues of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), dioxin-like polychlorinated biphenyl (PCB) and polycyclic aromatic hydrocarbons (PAH) were monitored in the sediment of the lake. Samples were collected from six different sampling stations around the lake using a box-corer sampler, then kept frozen. Samples were extracted and cleaned up before residue determination was conducted using an HRGC/HRMS. An HP 6890 plus gas chromatograph was coupled to a Micromass Autospec Ultima mass spectrometer operating in EI mode at 35 eV and with a resolution of 10.000 (5% valley). PCDDs and PCDFs were detected in all sediment samples collected from various sampling stations. Results showed some progressive increase in PCDDs concentrations relevant to increase in chlorination. In the PCDD group of congeners, 1, 2, 3, 4, 6, 7, 8, 9 octa-CDD had the highest detected concentrations in all samples, while 2, 3, 7, 8 tetra-CDD showed the lowest concentrations. The World Health Organization toxicity equivalents ranged from 0.387 to 11.20 ng kg^?1 d.w. For PCDD homologues, hexa-CDD was the most dominant homologue in all sediment samples analysed. Regarding dioxin-like PCBs, results showed that IUPAC No. 118 congener, 2, 3, 4, 4, 5, pentachlorobiphenyl was the most concentrated of all detected congeners, with concentrations ranging between 0.039 and 43.201 µg kg^?1. For polycyclic aromatic hydrocarbons, benzo(b+k+j)fluoranthene had the highest concentrations in almost all sampling stations. However, fluorene was the smallest detected concentration in almost all stations. This result would indicate that PAH contamination of the lake seems to be coming from one main source in all sampling stations. The present work is the first record of PCCDs, PCCFs, and dioxin-like PCBs in the Temsah lake. The concentrations of the contaminants monitored in this study, especially those of PAHs, are rather alarming. Efforts should be made to stop point sources that contaminate the lake.     

Predicting arsenic concentrations in groundwater of San Luis Valley,Colorado: implications for individual-level lifetime exposure assessment

Consumption of inorganic arsenic in drinking water at high levels has been associated with chronic diseases. Risk is less clear at lower levels of arsenic, in part due to difficulties in estimating exposure. Herein we characterize spatial and temporal variability of arsenic concentrations and develop models for predicting aquifer arsenic concentrations in the San Luis Valley, Colorado, an area of moderately elevated arsenic in groundwater. This study included historical water samples with total arsenic concentrations from 595 unique well locations. A longitudinal analysis established temporal stability in arsenic levels in individual wells. The mean arsenic levels for a random sample of 535 wells were incorporated into five kriging models to predict groundwater arsenic concentrations at any point in time. A separate validation dataset (n = 60 wells) was used to identify the model with strongest predictability. Findings indicate that arsenic concentrations are temporally stable (r = 0.88; 95 % CI 0.83–0.92 for samples collected from the same well 15–25 years apart) and the spatial model created using ordinary kriging best predicted arsenic concentrations (ρ = 0.72 between predicted and observed validation data). These findings illustrate the value of geostatistical modeling of arsenic and suggest the San Luis Valley is a good region for conducting epidemiologic studies of groundwater metals because of the ability to accurately predict variation in groundwater arsenic concentrations.     

Monitoring and risk assessment of polychlorinated biphenyls (PCBs) in agricultural soil from two industrialized areas

For monitoring and risk assessment, levels and distributions of Σ₂₉ PCBs in paddy soil samples collected from Gwangyang (10 sites) and Ulsan (20 sites), heavily industrialized cities in Korea, were investigated using high-resolution gas chromatography/high-resolution mass spectrometry. Overall, total concentrations of Σ₂₉ PCBs in Gwangyang (216.4–978.6 pg g^?1 dw) and Ulsan (273.8–1824.1 pg g^?1 dw) were higher than those (106.6–222.6 pg g^?1 dw) in agricultural soil from Anseong in Korea. The TEQ (toxic equivalency) values from Gwangyang (0.06–0.40 ng TEQ kg^?1 dw) and Ulsan (0.06–0.22 ng TEQ kg^?1 dw) were higher than those (0.04–0.11 ng TEQ kg^?1 dw) in Anseong but lower than the WHO threshold level (20 ng TEQ kg^?1). However, one of the most toxic congeners, PCB 126, gave the highest concentration, possibly posing a risk to the biota. Seven indicator PCB congeners contributed to 50–80% of the total concentration of Σ₂₉ PCBs, indicating the 7 PCBs can be used as valuable indicators for monitoring. The principal component analysis and cluster analysis for the homologue profiles of PCBs indicated that all the samples from both cities had the similar PCB contamination patterns, and the major sources of the PCB contamination were most likely from the usage of Aroclor 1254 than those of Aroclors 1242 and 1260. These PCB technical mixtures were possibly significantly used by various industries including iron and steel industries in Gwangyang and petrochemical and shipbuilding industries in Ulsan.     

Flooding and the Distribution of Selected Metals in Floodplain Sediments in St. Maries, Idaho

The link between sediment contamination and flooding is not well established, since flooding may exacerbate problems by spreading pollutants throughout the floodplain, or alternatively may dilute contaminants in source areas. To determine the substance of such relationships, the pattern of sediment contamination was examined in a small Idaho town following flooding in 1996. Four heavy metals were tested, nickel, chromium, zinc and copper, in 97 soil samples obtained from sites across the floodplain of the St. Joe River. Flood history and land-uses at each sample site were noted. Results showed that contamination levels generally were not high, with flood areas having lower concentrations than non-flood areas. A stronger relationship could be argued for land-use, with higher concentrations of contamination associated with some industrial sites. High levels of contamination were also found in several samples taken from recreational areas. Further research looking at the potential sources of contamination in relation to characteristics of the flood hydrology would seem pertinent.     

Contamination levels and state assessment in the lakes of the Oliveri-Tindari Lagoon (North-Eastern Sicily,Italy)

The Oliveri-Tindari Lagoon, located in North-Eastern Sicily (Italy) and composed of six lakes, is subject to continuous environmental changes. An integrated study focusing on sediment features and levels of contamination was carried out for three of the six lakes, which are of ancient origin: Verde, Mergolo della Tonnara and Marinello. A high primary production (26.89 μg l^?1) was detected at Lake Verde; texture classification showed a typical grain size in the sediments of all lakes; the study of macronutrients highlighted 17.08 of total carbon in sediments from Lake Mergolo della Tonnara; toxic elements were detected at higher concentrations in the sediments of Lake Marinello in comparison to the others, while arsenic was found in high concentrations in all the samples tested, especially in Lake Verde, with a mean value of 17.25 mg kg^?1 dry weight (d.w.). All the organic contaminants, except 4, 4′-dichlorodiphenyldichloroethylene, were below the detection limits in the sediments. Minimal microbiological contamination was found in both water and sediment samples. In the latter, we isolated several bacterial strains thriving in the presence of arsenic, which play a role in the biogeochemical cycle of arsenic. These preliminary results, obtained for the first time using a multidisciplinary approach, provide general information about the Oliveri-Tindari Lagoon area.     

Trace elements distributions at Datoko-Shega artisanal mining site,northern Ghana

Environmental geochemistry classifies elements into essential, non-essential and toxic elements in relationship to human health. To assess the environmental impact of mining at Datoko-Shega area, the distributions and concentrations of trace elements in stream sediments and soil samples were carried out. X-ray fluorescence analytical technique was used to measure the major and trace element concentrations in sediments and modified fire assay absorption spectrometry in soils. The results showed general depletion of major elements except titanium oxide (TiO₂) compared to the average crustal concentrations. The retention of TiO₂ at the near surface environment probably was due to the intense tropical weathering accompanied by the removal of fine sediments and soil fractions during the harmattan season by the dry north-east trade winds and sheet wash deposits formed after flash floods. The results also showed extreme contamination of selenium (Se), cadmium (Cd) and mercury (Hg), plus strong contaminations of arsenic (As) and chromium (Cr) in addition to moderate contamination of lead (Pb) in the trace element samples relative to crustal averages in the upper continental crust. However Hg, Pb and Cd concentrations tend to be high around the artisanal workings. It was recognised from the analysis of the results that the artisanal mining activity harnessed and introduces some potentially toxic elements such as Hg, Cd and Pb mostly in the artisan mine sites. But the interpretation of the trace element data thus invalidates the elevation of As concentrations to be from the mine operations. It consequently noticed As values in the mine-impacted areas to be similar or sometimes lower than As values in areas outside the mine sites from the stream sediment results.

     

Polybrominated diphenyl ethers in plastic products,indoor dust,sediment and fish from informal e-waste recycling sites in Vietnam: a comprehensive assessment of contamination,accumulation pattern,emissions, and human exposure

Residue concentrations of polybrominated diphenyl ethers (PBDEs) in different kinds of samples including consumer products, indoor dust, sediment and fish collected from two e-waste recycling sites, and some industrial, urban and suburban areas in Vietnam were determined to provide a comprehensive assessment of the contamination levels, accumulation pattern, emission potential and human exposure through dust ingestion and fish consumption. There was a large variation of PBDE levels in plastic parts of obsolete electronic equipment (from 1730 to 97,300 ng/g), which is a common result observed in consumer plastic products reported elsewhere. PBDE levels in indoor dust samples collected from e-waste recycling sites ranged from 250 to 8740 ng/g, which were markedly higher than those in industrial areas and household offices. Emission rate of PBDEs from plastic parts of disposed electronic equipment to dust was estimated to be in a range from 3.4 × 10^?7 to 1.2 × 10^?5 (year^?1) for total PBDEs and from 2.9 × 10^?7 to 7.2 × 10^?6 (year^?1) for BDE-209. Some fish species collected from ponds in e-waste recycling villages contained elevated levels of PBDEs, especially BDE-209, which were markedly higher than those in fish previously reported. Overall, levels and patterns of PBDE accumulation in different kinds of samples suggest significant emission from e-waste sites and that these areas are potential sources of PBDE contamination. Intakes of PBDEs via fish consumption were generally higher than those estimated through dust ingestion. Intake of BDE-99 and BDE-209 through dust ingestion contributes a large proportion due to higher concentrations in dust and fish. Body weight normalized daily intake through dust ingestion estimated for the e-waste recycling sites (0.10–3.46 ng/day/kg body wt.) were in a high range as compared to those reported in other countries. Our results highlight the potential releases of PBDEs from informal recycling activities and the high degree of human exposure and suggest the need for continuous investigations on environmental pollution and toxic impacts of e-waste-related hazardous chemicals.     

Pah characteristics in ambient air within a steel industrial complex

Ambient air samples at ten sites in an iron and steel industrial complex were collected from June to December for analyzing polycyclic aromatic hydrocarbons (PAHs). Sixteen species of PAH components in air samples were identified. The results indicate that both gaseous phase and particle‐bound PAHs at the top of the cokemaking plants are unusually high. The profiles of particle‐bound PAHs indicate that the predominant species at the top of, the coke oven batteries are those of high molecular weight components. The major components of particle‐bound PAHs at sampling sites near the fenceline, however, include the medium molecular weight components. The PAH profiles of air samples within the industrial complex show a strong similarity to those of cokemaking plant samples. The concentrations and the specific content of benzo(a)pyrene in the iron and steel industrial complex are higher than those values measured in urban area, petrochemical industry park, and open‐air burning area.     

Analytical survey of arsenic in geothermal waters from sites in Kyushu,Japan, and a method for removing arsenic using magnetite

The objective of this study was to survey the cation and anion contents of geothermal waters to gather fundamental information on geographical variations. Sixteen sites in hot spring areas on the island of Kyushu in Japan were studied. The study focused on the arsenic content of the samples. Very high arsenic concentrations (more than 0.1 mg/l) were detected in most of the geothermal waters sampled. High contents of boron and fluoride (more than 1.0 mg/l) were also detected in some samples. Arsenic removal was performed on a laboratory scale using columns packed with a magnetite-type adsorbent. The reduction of arsenic contamination to a concentration of less than 0.01 mg/l could be achieved in the early stages of adsorption (bed volume = 200).     

Polychlorinated biphenyl (PCB) residues in European roe deer (Capreolus capreolus) and red deer (Cervus elaphus) from north-western Poland

The purpose of this study was to evaluate polychlorinated biphenyls (PCBs) contamination levels in roe and red deer from north-western Poland and to assess environmental pollution in this area. A quantitative analysis was conducted using a capillary gas chromatography/mass spectrometry method. The mean concentrations of ΣPCBs (sum of PCBs: 28, 52, 101, 138, 153, 180) in liver samples were 30.24±12.35 ng·g^?1 of lipid weight (l.w.) in roe deer and 60.13±14.23 ng·g^?1 l.w. in red deer, compared with 24.21±10.02 and 45.22±9.77 ng·g^?1 in the lungs of roe and red deer, respectively. PCBs 138, 153 and 180 were the dominant congeners in the liver samples of the analysed animals, whereas PCB 138 and 153 in the lungs. TEQs levels calculated for only dioxin-like PCBs were low: 0.32 and 0.29 pg WHO-PCB-TEQ·g^?1 fat in liver of red deer and roe deer, respectively. The mean PCB concentrations obtained in our study for organs of roe deer and red deer were several times lower than those reported elsewhere. These findings show that the investigated roe and red deer originated from an area with low levels of PCB contamination.     

电子垃圾拆解区土壤中典型手性PCBs分布及对映体特征

龙塘镇位于广东省清远市,是国内最大的进口电子垃圾集中处理处置地之一.通过对龙塘镇土壤中7种手性PCBs对映体浓度和对映体百分数(enantiomer fractions,EF)值的测定,发现龙塘镇土壤样品除PCB45和PCB174外,其余5种手性PCBs在土壤中均有不同程度的检出.土壤中5种目标手性PCBs(PCB91、PCB95、PCB132、PCB136和PCB149)的总浓度为145.4—286.7 ng·g^-1,这与先前文献中测定清远市土壤中手性PCBs污染水平基本一致.5种同系物的含量排序为PCB95>PCB132>PCB136>PCB149>PCB91.在距离电子垃圾拆解区10km以外的区域也检测到手性PCBs,证实这些污染物已经迁移到周边地区.土壤中手性PCB91、PCB95、PCB132、PCB136和PCB149的EFs值分别为0.519±0.005、0.4443±0.006、0.427±0.003、0.379±0.016和0.494±0.008,其中PCB149具有双向选择性.在全部检出样品中26%的PCB91、78%的PCB95、100%的PCB132、86%的PCB136和53%的PCB149具有非外消旋特征,表明该地区土壤中手性对映体选择性降解的显著性.     

Arsenic contamination in the Kanker district of central-east India: geology and health effects

This paper identifies newer areas of arsenic contamination in the District Kanker, which adjoins the District Rajnandgaon where high contamination has been reported earlier. A correlation with the mobile phase episodes of arsenic contamination has been identified, which further hinges on the complex geology of the area. Arsenic concentrations in both surface and groundwater, aquatic organisms (snail and water weeds) soil and vegetation of Kanker district and its adjoining area have been reported here. The region has been found to contain an elevated level of arsenic. All segments of the ecoysystem are contaminated with arsenic at varying degrees. The levels of arsenic vary constantly depending on the season and location. An analysis of groundwater from 89 locations in the Kanker district has shown high values of arsenic, iron and manganese (mean: 144, 914 and 371 μg L⁻¹, respectively). The surface water of the region shows elevated levels of arsenic, which is influenced by the geological mineralised zonation. The most prevalent species in the groundwater is As(III), whereas the surface water of the rivers shows a significant contamination with the As(V) species. The analysis shows a bio-concentration of the toxic metals arsenic, nickel, copper and chromium. Higher arsenic concentrations (groundwater concentrations greater than 50 μg L⁻¹) are associated with sedimentary deposits derived from volcanic rocks, hence mineral leaching appears to be the source of arsenic contamination. Higher levels of arsenic and manganese in the Kanker district have been found to cause impacts on the flora and fauna. A case study of episodic arsenical diarrhoea is presented.     

Variability in the chemistry of private drinking water supplies and the impact of domestic treatment systems on water quality

Tap water from 497 properties using private water supplies, in an area of metalliferous and arsenic mineralisation (Cornwall, UK), was measured to assess the extent of compliance with chemical drinking water quality standards, and how this is influenced by householder water treatment decisions. The proportion of analyses exceeding water quality standards were high, with 65 % of tap water samples exceeding one or more chemical standards. The highest exceedances for health-based standards were nitrate (11 %) and arsenic (5 %). Arsenic had a maximum observed concentration of 440 µg/L. Exceedances were also high for pH (47 %), manganese (12 %) and aluminium (7 %), for which standards are set primarily on aesthetic grounds. However, the highest observed concentrations of manganese and aluminium also exceeded relevant health-based guidelines. Significant reductions in concentrations of aluminium, cadmium, copper, lead and/or nickel were found in tap waters where households were successfully treating low-pH groundwaters, and similar adventitious results were found for arsenic and nickel where treatment was installed for iron and/or manganese removal, and successful treatment specifically to decrease tap water arsenic concentrations was observed at two properties where it was installed. However, 31 % of samples where pH treatment was reported had pH < 6.5 (the minimum value in the drinking water regulations), suggesting widespread problems with system maintenance. Other examples of ineffectual treatment are seen in failed responses post-treatment, including for nitrate. This demonstrates that even where the tap waters are considered to be treated, they may still fail one or more drinking water quality standards. We find that the degree of drinking water standard exceedances warrant further work to understand environmental controls and the location of high concentrations. We also found that residents were more willing to accept drinking water with high metal (iron and manganese) concentrations than international guidelines assume. These findings point to the need for regulators to reinforce the guidance on drinking water quality standards to private water supply users, and the benefits to long-term health of complying with these, even in areas where treated mains water is widely available.     

Probability distributions of arsenic in soil from brownfield sites in Beijing (China): statistical characterization of the background populations and implications for site assessment studies

A probabilistic analysis was performed on soil arsenic concentration data from 4 brownfield sites at Beijing (Chaoyang and Haidian Districts), involved in environmental assessment studies. The available data sets were processed to provide a statistical characterization of the background populations and differentiate “anomalous data” from the natural range of variation of arsenic concentrations in soil. The site-specific background distributions and the existing wide-scale background values defined for the Beijing area were compared, discussing related implications for the definition of metal contamination soil screening levels (SSLs) in site assessment studies. The statistical analysis of As data sets discriminated site-specific background populations, encompassing 88% to 94% of the sample data, from outliers values, associated with either subsoil natural enrichments or possible anthropogenic releases. Upper Baseline Concentration (UBC) limits (+ 2σ level), including most of the site-specific metal background variability, were derived based on the statistical characterization of the background populations. Sites in the Chaoyang South District area had UBC values in the range 10.4–12.6 mg·kg^-1. These ranges provide meaningful SSL values to be adopted for As in local site assessment studies. Using the wide-scale background value for the Beijing area would have erroneously classified most of the areas in the subject sites as potentially contaminated.     

Foodweb modeling for polychlorinated biphenyls (PCBs) in the Twelvemile Creek Arm of Lake Hartwell,South Carolina,USA

PCBs from the Sangamo-Weston Superfund Site near Clemson, South Carolina, USA, were released into the Twelvemile Creek Arm of Lake Hartwell until the early 1990s. Monitoring data have shown that while PCB concentration in sediments declined since 1995, PCB concentrations in fish have remained elevated, e.g., largemouth bass (Micropterus salmoides) concentrations have ranged from 5 to 10 ppm. The EPA aquatic ecosystem model AQUATOX was applied to this system to better characterize foodweb dynamics that lead to biomagnification of PCBs. The model was calibrated with observed fish biomass data. Simulated PCB loading over a 12-year period provided a reasonable fit to observed PCB data in fish. The model demonstrated that contaminated labile detritus loaded to the system was incorporated into the foodweb rather than deposited, thereby maintaining the PCB concentrations in fish while concentrations in the sediment declined. A dominant PCB pathway was from detritus to daphnia to shad to largemouth bass. Fish PCB concentrations showed moderate sensitivity to toxicant parameters; model runs incorporating uncertainty in these parameters predicted recovery (<2 ppm PCB) for all species in the range of years from 2008 to 2013. The high sensitivity of the model to parameters related to growth strongly affected PCB concentrations in fish and should be considered in future AQUATOX applications.