Bioconcentration of metals in the moss Scleropodium purum in the area surrounding a power plant. A geotopographical predictive model for mercury

Samples of the moss Scleropodium purum collected in 1995 and 1997 were used to biomonitor the deposition of metals in the area surrounding a thermal power plant. Significantly higher levels of Cu (p<0.05), Fe (p<0.01), As and Hg (p<0.001) were found in the 1997 samples than in the 1995 samples, due to changes in atmospheric conditions. The influence on bioconcentration of the orientation of the sampling sites relative to the source of emission was studied. It was found that the increase recorded in 1997 generally occurred in the sampling sites in the south east of the study area. Analysis of the effect of distance from the source of emission revealed that the increase in metal levels in 1997 took place close to the power station (10–30 km). Finally, multiple regression analysis was used to construct a model that related different topographical variables to the concentrations of Hg in moss. The model, constructed using the data collected in both sampling periods, included the orientation of the sampling sites relative to the source of emission as well as the height of sampling sites in 1995 and the distance from the emission point in 1997. The model allowed us to determine the extent of the area affected by deposition and to establish the magnitude of deposition.     

Environmental prospection for PCDD/PCDF, PAH, PCB and heavy metals around the incinerator power plant of Reggio Emilia town (Northern Italy) and surrounding main roads

Samples of soil, sediment and pine needles from the Reggio Emilia area were analysed in order to estimate the environmental pollution caused by an MSWI. PCDD/PCDF, PCB, PAH and metals were analysed in the collected samples. The data obtained showed relatively low pollution levels. Indeed, the PCDD/PCDF and PCB data were comparable to the values usually found in the grazing areas of the European Union countries. Metal concentrations in soils and sediments may be related to local geological occurrences and to agricultural activities. PAH values are significantly lower than the limit values set by the Italian law.     

Monitoring H2S air pollution caused by the industrial exploitation of geothermal energy: The pitfall of using lichens as bioindicators

This study showed that NH₃ emitted from geothermal power plants affects the surrounding epiphytic lichen vegetation and diversity, confounding the interpretation of lichen diversity counts in terms of air pollution by H₂S. The presence of nitrophytic lichen species around geothermal installations, determined by NH₃, caused relatively high diversity values that were not related with the levels of air pollution by H₂S. It is recommended that in the presence of NH₃ emission, nitrophytic species are excluded from the calculation of lichen diversity values.     

Differential accumulation of mercury and other trace metals in the food web components of a reservoir impacted by a chlor-alkali plant (Flix, Ebro River, Spain): Implications for biomonitoring

Comparative studies of biomonitors of trace metal contamination are relatively scarce. We took advantage of a point source pollution in a reservoir (Flix, Spain) to compare trace metal (Hg, Pb, Cd, Se, As, Zn, Cu, Cr) bioaccumulation patterns among 16 food web components. Our results indicate that most organisms are suitable for Hg biomonitoring, whereas other metals are better monitored by only some of them. Biofilms and zebra mussel were the organisms with larger and more diverse biomonitoring capacity. However, we show that using groups of biomonitors increase the scope and strengths of the conclusions and specific goals can be better addressed. We conclude providing an overview of the strengths and weaknesses of the main organisms considered for biomonitoring trace metals in rivers and reservoirs.     

Using native epiphytic ferns to estimate the atmospheric mercury levels in a small-scale gold mining area of West Java, Indonesia

Mercury pollution is caused by artisanal and small-scale gold mining (ASGM) operations along the Cikaniki River (West Java, Indonesia). The atmosphere is one of the primary media through which mercury can disperse. In this study, atmospheric mercury levels are estimated using the native epiphytic fern Asplenium nidus complex (A. nidus) as a biomonitor; these estimates shed light on the atmospheric dispersion of mercury released during mining.Samples were collected from 8 sites along the Cikaniki Basin during September-November, 2008 and September-November, 2009.The A. nidus fronds that were attached to tree trunks 1-3 m above the ground were collected and measured for total mercury concentration using cold vapor atomic absorption spectrometry (CVAAS) after acid-digestion. The atmospheric mercury was collected using porous gold collectors, and the concentrations were determined using double-amalgam CVAAS.The highest atmospheric mercury concentration, 1.8 × 10³ ± 1.6 × 10³ ng m⁻³, was observed at the mining hot spot, and the lowest concentration of mercury, 5.6 ± 2.0 ng m⁻³, was observed at the remote site from the Cikaniki River in 2009. The mercury concentrations in A. nidus were higher at the mining village (5.4 × 10³ ± 1.6 × 10³ ng g⁻¹) than at the remote site (70 ± 30 ng g⁻¹). The distribution of mercury in A. nidus was similar to that in the atmosphere; a significant correlation was observed between the mercury concentrations in the air and in A. nidus (r = 0.895, P < 0.001, n = 14). The mercury levels in the atmosphere can be estimated from the mercury concentration in A. nidus using a regression equation: log (Hg_A.nidu/ng g⁻¹) = 0.740 log (Hg_Air/ng m⁻³) − 1.324.     

Monitoring air quality with lichens: a comparison between mapping in forest sites and in open areas

Four different methods of epiphytic lichen mapping were used for the assessment of air quality in the region under the influence of the Sostanj Thermal Power Plant (Salek Valley, Slovenia). Three methods were based on the presence of different lichen species (VDI, EU and ICP-Forest), the fourth on a frequency and coverage assessment of different growth forms of epiphytic lichens, e.g. crustose, foliose and fruticose (SI). A comparison of the results from the assessment of air quality between forest sites (ICP-Forest, SI) and open areas (VDI, EU and SI), obtained by the different methods of epiphytic lichen mapping, is presented in the contribution. Data showed that lichen species richness is worse in forest sites in comparison with open areas. From the data obtained it can be concluded that epiphytic lichen mapping in open areas is a better method for the assessment of air pollution in a given area than mapping in forest sites. The species-based methods in open areas are more powerful and useful for air quality assessment in polluted research areas than the SI and ICP-Forest methods.     

The role of a steel plant in north-west Italy to the local air concentrations of PCDD/Fs

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are ubiquitous contaminants, mainly released into the environment during combustion processes (point sources), but also from other sources (traffic, uncontrolled combustion).This study aims at investigating the contribution of a steel plant in NW Italy (700 000 tons of steel year⁻¹) to the air concentrations of PCDDs/PCDFs at local level, through the analysis of measured, modelled and literature data. The study was carried out in an area of 600 km², using air quality data measured by the institutional monitoring network, data obtained from AERMOD simulations and literature data.The measured air concentrations were consistent with literature values for similar areas, and both the homologue profiles and PCA analyses showed a clear distinction between the monitoring stations and the source profiles.All the previous results were confirmed by the air dispersion model (AERMOD), that predicted PCDD/F air concentrations due to the steel plant from four to two orders of magnitude lower than those measured in the monitoring stations, highlighting the presence of other sources.This study outlines the limited influence of the source in the local PCDD/F air concentrations and at the same time the usefulness of a joint analysis of measured, literature and calculated data to correctly evaluate the role of a source to the local pollution. The study also highlights the usefulness of AERMOD as a complementary tool to define the correct placement of monitoring stations and to locate those areas expected to have the highest air concentrations deriving from a source.     

电厂燃煤过程中汞的迁移转化及控制技术研究

讨论了近年来国内外电厂煤燃烧过程中汞的形态分布以及迁移转化规律研究的最新成果 ,并在此基础上评价了现有电站污染控制系统的脱汞性能 ,考虑到汞的排放控制 ,提出了对现有设备的可能优化措施。在分析中 ,注意到汞的易挥发性 ,认为汞排放控制应该充分考虑烟气中汞形态的迁移转化。由于氧化态汞在汞控制中有着重要作用 ,其研究将是控制电厂汞排放的关键。先进的汞排放控制技术的开发应以增强汞的氧化态为优先发展方向。     

Formation of secondary inorganic aerosols by power plant emissions exhausted through cooling towers in Saxony

Background, aim, and scope  The fraction of ambient PM₁₀ that is due to the formation of secondary inorganic particulate sulfate and nitrate from the emissions of two large, brown-coal-fired power stations in Saxony (East Germany) is examined. The power stations are equipped with natural-draft cooling towers. The flue gases are directly piped into the cooling towers, thereby receiving an additionally intensified uplift. The exhausted gas-steam mixture contains the gases CO, CO₂, NO, NO₂, and SO₂, the directly emitted primary particles, and additionally, an excess of ‘free’ sulfate ions in water solution, which, after the desulfurization steps, remain non-neutralized by cations. The precursor gases NO₂ and SO₂ are capable of forming nitric and sulfuric acid by several pathways. The acids can be neutralized by ammonia and generate secondary particulate matter by heterogeneous condensation on preexisting particles. Materials and methods  The simulations are performed by a nested and multi-scale application of the online-coupled model system LM-MUSCAT. The Local Model (LM; recently renamed as COSMO) of the German Weather Service performs the meteorological processes, while the Multi-scale Atmospheric Transport Model (MUSCAT) includes the transport, the gas phase chemistry, as well as the aerosol chemistry (thermodynamic ammonium–sulfate–nitrate–water system). The highest horizontal resolution in the inner region of Saxony is 0.7 km. One summer and one winter episode, each realizing 5 weeks of the year 2002, are simulated twice, with the cooling tower emissions switched on and off, respectively. This procedure serves to identify the direct and indirect influences of the single plumes on the formation and distribution of the secondary inorganic aerosols. Results and conclusions  Surface traces of the individual tower plumes can be located and distinguished, especially in the well-mixed boundary layer in daytime. At night, the plumes are decoupled from the surface. In no case does the resulting contribution of the cooling tower emissions to PM₁₀ significantly exceed 15 μgm⁻³ at the surface. These extreme values are obtained in narrow plumes on intensive summer conditions, whereas different situations with lower turbulence (night, winter) remain below this value. About 90% of the PM₁₀ concentrations in the plumes are secondarily formed sulfate, mainly ammonium sulfate, and about 10% originate from the primarily emitted particles. Under the assumptions made, ammonium nitrate plays a rather marginal role. Recommendations and perspectives  The analyzed results depend on the specific emission data of power plants with flue gas emissions piped through the cooling towers. The emitted fraction of ‘free’ sulfate ions remaining in excess after the desulfurization steps plays an important role at the formation of secondary aerosols and therefore has to be measured carefully.     

热电厂双膜法中水深度处理系统运行效果与问题分析

中水已成为热电厂的重要水源,其深度处理是影响电厂水处理系统的关键。为评估双膜法在电厂深度处理中的潜力与稳定性,考察了山东某热电厂石灰混凝-超滤(UF)-反渗透(RO)系统不同季节的处理效果及污染物去除特征与各工段贡献率。研究表明：双膜法对浊度、色度、电导、碱度、COD和TOC的去除率分别达95.82%、96.62%、96.73%、98.22%、96.42%和89.13%,在夏季严重膜污堵的条件下,也可保障产水达标,是一种有效的中水深度处理技术。预处理仅去除某些大分子腐殖酸类有机物、硬度类物质、悬浮物,富里酸类有机物、氮等其他溶解性物质主要由RO去除(去除率均60%),因此,存在膜结垢和污堵的风险。不同季节污染物浓度变化不显著,但夏季高温条件下微生物代谢和繁殖速率较高,荧光指数(fluorescence index, FI)大于2,生物指数(biological index, BIX)为1.2左右,这是夏季膜污堵爆发的关键原因。     

Environmental monitoring of PCDD/Fs and metals in the vicinity of a cement plant after using sewage sludge as a secondary fuel

In 2005, the partial substitution (20%) of fossil fuel by sewage sludge was tested in a Spanish cement plant. In order to establish the environmental impact for the surroundings, in 2006, the levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and heavy metals (As, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, Sn, Tl, V, and Zn) were monitored in soil and vegetation samples collected near the cement plant. The temporal trends in the pollutant levels were studied by comparing the concentrations with those obtained in a previous survey (2003) in the same sampling sites. Very slight changes of the PCDD/F concentrations in both monitors were registered in the period 2003–2006 (0.17–0.15 and 0.94–1.10 ng I-TEQ kg⁻¹ dw in herbage and soil, respectively). In turn, there was a notable heterogeneity in the evolution of metal levels, which varied according to each particular element. Anyhow, the current levels of organic and inorganic pollutants are in the low part of the range in comparison with other zones impacted by cement plants, as well as industrial and urban areas worldwide. The human health risks derived from the exposure to PCDD/Fs and metals were also assessed. Although the cancer risks due to PCDD/Fs slightly increased, a reduction of the total carcinogenic risks, including metals, was noted. In conclusion, there were not observed impact changes for the environmental and the local population as a consequence of using sewage sludge as secondary fuel.     

Biomonitoring of the distribution of dust emissions by means of a new SEM/EDX technique

A new application of the Scanning Electron Microscope (SEM) equipped with an Energy Dispersive X-ray Microanalyzer (EDX) has been developed to study the distribution of airborne dust emissions. This technique makes it possible to identify the particles and measure the amount of dust deposition on the surface of the biomonitoring material. Pine bark or needles and moss can easily be used as the study material. A map indicating pollution levels and distribution can be drawn on the basis of the measured data.     

Benzene, toluene, ethyl benzene and xylenes in ambient air and Pinus sylvestris L. needles: a comparative study between Belgium, Hungary and Latvia

Concentrations of benzene, toluene, ethyl benzene and xylenes (BTEX) in ambient air and in 1 yr old Pinus sylvestris pine needles were monitored along a busy road, petrol station and rural area of Belgium, Hungary and Latvia in a 1 yr period. To test P. sylvestris as a possible biomonitor for the BTEX concentrations, samples were taken in the four seasons. As the distribution of data was not normal, the level of pollution on different sites and seasons was compared and evaluated by non-parametric tests. The measured air concentrations did not differ significantly from one season to another throughout the year. There were, however, differences between sampling places. The C₂-alkylbenzene and toluene concentrations in the needles were similar in the autumn/winter and spring/summer periods but a significant decrease in their concentration was observed in every place between winter and spring. This effect was less obvious for toluene.     

Air quality assessment by tree bark biomonitoring in urban, industrial and rural environments of the Rhine Valley: PCDD/Fs, PCBs and trace metal evidence

Tree barks were used as biomonitors to evaluate past atmospheric pollution within and around the industrial zones of Strasbourg (France) and Kehl (Germany) in the Rhine Valley. The here estimated residence time for trace metals, PCBs and PCDD/Fs in tree bark is >10 years. Thus, all pollution observed by tree bark biomonitoring can be older than 10 years. The PCB baseline concentration (sum of seven PCB indicators (Σ₇PCB_ind)) determined on tree barks from a remote area in the Vosges mountains is 4 ng g⁻¹ and corresponds to 0.36 × 10⁻³ ng toxic equivalent (TEQ) g⁻¹ for the dioxin-like PCBs (DL-PCBs). The northern Rhine harbor suffered especially from steel plant, waste incinerator and thermal power plant emissions. The polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/Fs) concentrations analyzed in tree barks from this industrial area range between 392 and 1420 ng kg⁻¹ dry-weight (dw) corresponding to 3.9 ng TEQ_PCDD/Fs kg⁻¹ to 17.8 ng TEQ_PCDD/Fs kg⁻¹, respectively. Highest PCDD/F values of 7.2 ng TEQ kg⁻¹ to 17.8 ng TEQ kg⁻¹ have been observed close to and at a distance of <2 km southwest of the chemical waste incinerator. However, very close to this incinerator lowest TEQ dioxin-like PCB (TEQ_DL-PCB) values of 0.006 ng TEQ g⁻¹ have been found. On the other hand close to and southwest and northeast of the steel plant the values are comparatively higher and range between 0.011 ng TEQ g⁻¹ and 0.026 ng TEQ g⁻¹. However, even stronger Σ₇PCB_ind enrichments have been observed at a few places in the city center of Kehl, where ΣDL-PCB values of up to 0.11 ng TEQ g⁻¹ have been detected. These enrichments, however, are the result of ancient pollutions since recent long-term measurements at the same sites indicate that the atmospheric PCB concentrations are close to baseline. Emissions from an old landfill of waste and/or great fires might have been the reasons of these PCB enrichments. Other urban environments of the cities of Kehl and Strasbourg show significantly lower Σ₇PCB_ind concentrations. They suffer especially from road and river traffic and have typically Σ₇PCB_ind concentrations ranging from 11 ng g⁻¹ to 29 ng g⁻¹. The PCB concentration of 29 ng g⁻¹ has been found in tree bark close to the railway station of Strasbourg. Nevertheless, the corresponding TEQ_DL-PCB are low and range between 0.2 × 10⁻³ ng TEQ g⁻¹ and 7 × 10⁻³ ng TEQ g⁻¹. Samples collected near road traffic are enriched in Fe, Sb, Sn and Pb. Cd enrichments were found close to almost all types of industries. Rural environments not far from industrial sites suffered from organic and inorganic pollution. In this case, TEQ_DL-PCB values may reach up to 58 × 10⁻³ ng TEQ g⁻¹ and the corresponding V, Cr, Co, Ni, and Cd concentrations are comparatively high.     

Breeding performance of blue tits (Cyanistes caeruleus) and great tits (Parus major) in a heavy metal polluted area

We compared heavy metal levels, calcium levels, breeding parameters and condition of nestling and adult Cyanistes caeruleus and Parus major along a heavy metal pollution gradient. Both species started laying earlier and showed inferior nestling growth and smaller fledging probability in the polluted areas, which are phenologically advanced in spring due to sparse forests. The major inter-specific difference in the responses was that the clutch size and hatching success were decreased in the polluted area in P. major, but not in C. caeruleus. Heavy metal profiles in nestling feces were relatively similar in the two species, though Ni and Pb levels were higher in C. caeruleus than in P. major. However, the latter species showed markedly higher fecal calcium concentrations. Lower calcium levels and higher levels of some heavy metals in C. caeruleus suggest that in Ca-deficient environments this species might be more susceptible to negative pollution effects than P. major.     

A comparison of simulated and observed ozone mixing ratios for the summer of 1998 in Western Europe

This study describes and evaluates the newly developed European scale Eulerian chemistry transport model CHIMERE-continental. The model is designed for seasonal simulations and real time forecasts without the use of super-computers. For the purpose of model evaluation simulated ozone mixing ratios for the period between 1 May 1998 and 30 September 1998 are compared to observational data from 115 European surface sites. In order to facilitate the interpretation of future forecasts a statistic is established to estimate the reliability of a simulated pollution level. Besides this, the comparison is done by means of time series, scatter plots, a spectral analysis and the calculation of RMS-errors and biases of the model results corresponding to each observation site. It turns out that the mean RMS-error of the simulated daily maximum ozone mixing ratio for the sites considered a priori as well suited for a model comparison is about 10 ppb. For the same period but a reduced number of sites observed concentrations of NO₂ and ethene are compared to simulated values. Difficulties encountered with the representativeness of observations when trying to evaluate a mesoscale air pollution model are discussed.     

Association between micronuclei frequency in pollen mother cells of Tradescantia and mortality due to cancer and cardiovascular diseases: A preliminary study in Sao José dos Campos, Brazil

The present study was designed to explore the correlation between the frequency of micronuclei in Trad-MN, measured across 28 biomonitoring stations during the period comprised between 11 of May and 2 of October, 2006, and adjusted mortality rates due to cardiovascular, respiratory diseases and cancer in Sao José dos Campos, Brazil, an area with different sources of air pollution. For controlling purposes, mortality rate due to gastrointestinal diseases (an event less prone to be affected by air pollution) was also considered in the analysis. Spatial distribution of micronuclei frequency was determined using average interpolation. The association between health estimators and micronuclei frequency was determined by measures of Pearson's correlation. Higher frequencies of micronuclei were detected in areas with high traffic and close to a petrochemical pole. Significant associations were detected between micronuclei frequency and adjusted mortality rate due to cardiovascular diseases (r = 0.841, p = 0.036) and cancer (r = 0.890, p = 0.018). The association between mortality due to chronic obstructive pulmonary diseases was positive but did not reach statistical significance (r = 0.640, p = 0.172), probably because of the small number of events. Gastrointestinal mortality did not exhibit significant association with micronuclei frequency. Because the small number of observations and the nature of an ecological study, the present findings must be considered with caution and considered as preliminary. Further studies, performed in different conditions of contamination and climate should be done before considering Trad-MN in the evaluation of human health risk imposed by air pollutants.     

PCDD/Fs in ambient air in north-east Italy: The role of a MSWI inside an industrial area

The stack gases of a municipal solid waste incinerator (MSWI), and ambient air were sampled in four locations around the plant for the analysis of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/Fs). The sampling area was close to an industrial area near Trieste, in north-east Italy. The purpose of the study was to estimate the impact of the MSWI emissions and to distinguish the contribution of these emissions from other potential emission sources in the industrial area.PCDD/F atmospheric concentrations were similar to those generally detected in urban–rural areas with one location about 2–3 times more contaminated than the others. Since the most contaminated location was inside the industrial area but upwind of the MSWI, principal component analysis (PCA) was used to establish whether other sources were the cause. This analysis clearly showed that a local steel plant’s emission was the main source of PCDDs/Fs in ambient air. This study highlights the usefulness of multivariate data analysis such as PCA to identify, among different potential emission sources, the one really responsible for the contamination.     

先锋草本植物凋落物源溶解性有机质对典型汞铊矿废渣中重金属释放特征的影响

先锋草本植物广泛应用于尾矿堆场生态恢复,其凋落物分解是尾矿中溶解性有机质(DOM)的重要来源。然而,先锋草本植物凋落物源DOM对尾矿中重金属释放特征的影响尚不清晰。本研究以典型汞铊矿废渣及三叶草凋落物为研究对象,通过开展批次培养实验探讨了三叶草凋落物源DOM对废渣中重金属(Hg、As、Sb、Tl)释放特征的影响。结果表明,三叶草凋落物源DOM的成分主要为类络氨酸类物质、陆生类腐殖质物质和微生物类腐殖质物质。DOM的添加明显促进废渣中Hg和As的释放,抑制Tl和Sb的释放,浸出液中重金属的浓度依次为As>Tl>Hg>Sb。DOM的添加有利于废渣中Hg(Ⅱ)的溶出,促进废渣中As(Ⅴ)还原为As(Ⅲ)。主成分和相关性分析结果表明,DOM的自身组分及其对环境条件(pH、Eh)的改变是影响废渣重金属释放特征的主要因素。以上研究结果可为深入认识开展生态修复的废渣堆场上重金属的地球化学过程及环境风险提供参考。     

Modeling air/sea flux parameters in a coastal area: A comparative study of results from the TOGA COARE model and the NOAA Buoy model

Because estuaries and coastal regions are particularly susceptible to nutrient over-enrichment due to their close proximity to source-rich regions, a goal of the BRACE study was to improve estimates of nitrogen air/sea transfer rates in the Tampa Bay Estuary. Our objective was to critically evaluate two air/sea gas exchange models to determine their efficacy for use in a coastal region, with the ultimate goal of improving nitrogen exchange estimates in Tampa Bay. We used meteorological data and oceanographic parameters collected hourly at an instrumented tower located in Middle Tampa Bay, Florida. The data was used to determine the friction velocity and the turbulent flux of heat and moisture across the air/sea interface and then compared with modeled parameters at the same offshore site. On average both models underpredicted sensible heat flux and there was considerable scatter in the data during stable conditions, indicating that nitrogen gas exchange rates may also be underestimated. Model improvement, however, was observed with friction velocity comparisons. Model inter-comparisons of sensible heat flux and friction velocity suggest excellent agreement between the TOGA COARE and the NOAA Buoy models, but model estimated heat transfer coefficients and latent heat fluxes did not agree as well. Based on our analysis, we conclude that both models are suitable for use in a coastal environment to estimate nitrogen air/sea gas exchange, although the NOAA Buoy model requires fewer meteorological inputs. However, if the purpose is to conduct more sophisticated microscale modeling of air/sea interactions, we recommend the TOGA COARE model.