Characterization of carbons from olive cake by sorption of wastewater pollutants

Studies has been conducted to compare the sorption properties between raw carbons made from olive cake and commercial activated carbons to remove aquatic pollutant such as heavy metal (HM), phenol (Ph), dodecylbenzenesulfonic acid-sodium salt detergent (DBSNa) and methylene blue dye (MB). Effect of acidic treatments by H2SO4, HCl and HNO3 on the sorption properties of olive cake carbon (OCC) were studied by mass titration, SEM photographs, sorption isotherms. It is found that acidic treatment changes the surface properties of OCC but do not enhance its sorption capacity. Compared to commercial activated carbons the OCC derivatives generally are equally able to uptake HM and Ph from solution but MB and DBSNa are not. This different behaviour is to attribute to manufacturing and activation treatments so as surface groups of the precursor sorbent material. For the heavy metals, chromium and silver were removed effectively but to small extent cadmium. This may be because of the various charge densities of metal elements tested. The results of the multiple experiments indicate that sorption of cadmium ions can be significantly improved by the presence of complexing agents sorbed from the carbon. An empirical mathematical form is proposed to correlate experimental data and to compare the performance of the different sorbent materials.     

Equilibrium and kinetics of adsorption of phosphate onto iron-doped activated carbon

Purpose

Two series of activated carbons modified by Fe (II) and Fe (III) (denoted as AC/N-Fe^II and AC/N-Fe^III), respectively, were used as adsorbents for the removal of phosphate in aqueous solutions.

Method

The synthesized adsorbent materials were investigated by different experimental analysis means. The adsorption of phosphate on activated carbons has been studied in kinetic and equilibrium conditions taking into account the adsorbate concentration, temperature, and solution pH as major influential factors.

Results

Maximum removals of phosphate are obtained in the pH range of 3.78?C6.84 for both adsorbents. Langmuir isotherm adsorption equation well describes the experimental adsorption isotherms. Kinetic studies revealed that the adsorption process followed a pseudo-second order kinetic model. Results suggest that the main phase formed in AC/N-Fe^II and AC/N-Fe^III is goethite and akaganeite, respectively; the presence of iron oxides significantly affected the surface area and the pore structure of the activated carbon.

Conclusions

Studies revealed that iron-doped activated carbons were effective in removing phosphate. AC/N-Fe^II has a higher phosphate removal capacity than AC/N-Fe^III, which could be attributed to its better intra-particle diffusion and higher binding energy. The activation energy for adsorption was calculated to be 22.23 and 10.89 kJ mol^?1 for AC/N-Fe^II and AC/N-Fe^III, respectively. The adsorption process was complex; both surface adsorption and intra-particle diffusion were simultaneously occurring during the process and contribute to the adsorption mechanism.     

Anti-oxidative property of crude rice oil extracted from cadmium-contaminated rice

Local residents who habitually consume cadmium-contaminated rice (Oryza sativa L.) can be exposed to cadmium toxicity in Mae Sot District, Tak Province, Thailand. This study aimed to investigate an alternative for utilizing cadmium-contaminated rice without compromising their health with hazard risks. First, cadmium (Cd) concentration in rice grain and crude rice oil was determined (0.203 ± 0.030 and 0.007 ± 0.002 mgCd/kg dry weight, respectively). Then crude rice oil extracted from cadmium-contaminated rice grain was studied for its anti-oxidative property using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging approach. Next, quantitative analysis of γ-oryzanol in crude rice oil was conducted. Results indicated that the level of cadmium concentration in the rice grain could cause adverse effects on human health. However, the amount of cadmium in the crude rice oil was safe for consumption. In crude rice oil anti-oxidative property, crude rice oil extracted from cadmium-contaminated rice was significantly higher than the control (P < 0.05). The concentration of γ-oryzanol in crude rice oil extracted from cadmium-contaminated rice was significantly higher than that in the control crude rice oil (P < 0.05). This study demonstrates an alternative way to use the rice grown in cadmium-contaminated areas for crude rice oil production for its anti-oxidative properties.     

Preparation of Activated Carbons from Raw and Biotreated Agricultural Residues for Removal of Volatile Organic Compounds

ABSTRACT

Activated carbons with diverse physical and chemical properties were produced from four agriculture residues, including raw barley husk, biotreated barley husk, rice husk, and pistachio shell. Results showed that with adequate steam activation (30–90 min, 50% H₂O_(g)/50% N₂), activated carbons with surface areas between 360 and 950 m² g^?1 were developed. Further increases in the activation time destroyed the pore structure of activated carbons, which resulted in a decrease in the surface area and pore volume. Biotreated agricultural residues were found to be suitable precursors for producing mesoporous activated carbons. The oxygen content of activated carbons increased with increasing activation time. Results from X-ray photoelectron spectroscopy examination further suggested that H₂O molecules react with the carbon surface, enhancing the deconvoluted peak area of carbonyl and carboxyl groups. Equilibrium adsorption of toluene indicated that the adsorption capacities increased with an increase in the inlet toluene concentration and a decrease in temperature. The adsorption isotherms were successfully fitted with Freundlich, Langmuir, and Dubinin– Radushkevich equations. Activated carbons derived from agricultural residues appear to be more applicable to adsorb volatile organic compounds at a low concentration and high-temperature environment.

IMPLICATIONS This paper presents data on the preparation of activated carbons from agricultural residues, especially the waste from biohydrogen generation. Experimental results indicated that with proper carbonization and steam activation, activated carbons with diverse characteristics can be produced from various agricultural residues. The resulting activated carbons effectively adsorb toluene. This work provides useful information for reutilization of these agricultural residues, helping in decreasing the cost of biological waste treatment and providing a cost-effective alternative to conventional adsorbent production and application.     

Enhanced mercuric chloride adsorption onto sulfur-modified activated carbons derived from waste tires

A number of activated carbons derived from waste tires were further impregnated by gaseous elemental sulfur at temperatures of 400 and 650 degrees C, with a carbon and sulfur mass ratio of 1:3. The capabilities of sulfur diffusing into the micropores of the activated carbons were significantly different between 400 and 650 degrees C, resulting in obvious dissimilarities in the sulfur content of the activated carbons. The sulfur-impregnated activated carbons were examined for the adsorptive capacity of gas-phase mercuric chloride (HgC1) by thermogravimetric analysis (TGA). The analytical precision of TGA was up to 10(-6) g at the inlet HgCl2 concentrations of 100, 300, and 500 microg/m3, for an adsorption time of 3 hr and an adsorption temperature of 150 degrees C, simulating the flue gas emitted from municipal solid waste (MSW) incinerators. Experimental results showed that sulfur modification can slightly reduce the specific surface area of activated carbons. High-surface-area activated carbons after sulfur modification had abundant mesopores and micropores, whereas low-surface-area activated carbons had abundant macropores and mesopores. Sulfur molecules were evenly distributed on the surface of the inner pores after sulfur modification, and the sulfur content of the activated carbons increased from 2-2.5% to 5-11%. After sulfur modification, the adsorptive capacity of HgCl2 for high-surface-area sulfurized activated carbons reached 1.557 mg/g (22 times higher than the virgin activated carbons). The injection of activated carbons was followed by fabric filtration, which is commonly used to remove HgCl2 from MSW incinerators. The residence time of activated carbons collected in the fabric filter is commonly about 1 hr, but the time required to achieve equilibrium is less than 10 min. Consequently, it is worthwhile to compare the adsorption rates of HgCl2 in the time intervals of < 10 and 10-60 min.     

High-level arsenite removal from groundwater by zero-valent iron

The objectives of this study were to conduct batch and column studies to (i) assess the effectiveness of zero-valent iron for arsenic remediation in groundwater, (ii) determine removal mechanisms of arsenic, and (iii) evaluate implications of these processes with regard to the stability of arsenic and long-term remedial performance of the permeable reactive barrier (PRB) technology. A high concentration arsenic solution (50 mg l(-1)) was prepared by using sodium arsenite (arsenic (III)) to simulate groundwater at a heavily contaminated Superfund site in the USA. Batch studies indicate that the removal of arsenic is a two-step reaction with fast initial disappearance of arsenite followed by a slow subsequent removal process. Flow-through columns were conducted at a flow rate of 17 ml h(-1) under reducing conditions for 6.6 mo. Kinetic analysis suggested that arsenic removal behaves as a zero-order reaction at high arsenic concentrations. Arsenic removal rate constants decreased with time and arsenic breakthrough was observed in the column study. Arsenic removal capacity of zero-valent iron was determined to be approximately 7.5 mg As/g Fe. Carbonate green rust was identified from the analysis of surface precipitates; arsenite uptake by green rust may be a major mechanism responsible for arsenic remediation by zero-valent iron. Analysis of HCl-extractable arsenic from iron samples indicated that approximately 28% of arsenic was in the form of arsenate suggesting that a surface oxidation process was involved in the arsenic removal with zero-valent iron.     

The influence of humic acids on the phytoextraction of cadmium from soil

Cadmium poses a major environmental and human health threat because of its constant release through anthropogenic activities. A need, therefore, exists for cost-effective remediation procedures. Phytoremediation, the use of plants to extract contaminants from soils and groundwater, has revealed great potential. However, it is limited by the fact that plants need time, nutrient supply and, moreover, have a limited metal uptake capacity. Synthetic chelators have shown positive effects in enhancing heavy metal extraction through phytoremediation, but they have also revealed a vast number of negative side-effects. The objective of this research was to investigate the use of humic acids as an alternative to synthetic chelators. Humic acids were applied to a cadmium-contaminated soil at various dosages, and the uptake of cadmium into Nicotiana tabacum SR-1 was determined in relation to the amounts of total and bioavailable cadmium in the soil. It was found that the theoretical bioavailability of cadmium, as determined by diethylenetriaminepentaacetic acid (DTPA) extraction, did not change, but its plant uptake was enhanced significantly, in some cases up to 65%. Humic acids added at a rate of 2 g kg(-1) soil increased the cadmium concentration in the shoots from 30.9 to 39.9 mg kg(-1). A possible reason for this enhancement is the decrease in pH, resulting in higher cadmium availability. Another possibility taken into account is that plants may take up cadmium complexes with humic acid fragments, which result from microbiological degradation or, self-dissociation.     

Preparation of activated carbons from raw and biotreated agricultural residues for removal of volatile organic compounds

Activated carbons with diverse physical and chemical properties were produced from four agriculture residues, including raw barley husk, biotreated barley husk, rice husk, and pistachio shell. Results showed that with adequate steam activation (30-90 min, 50% H2O(g),/50% N2), activated carbons with surface areas between 360 and 950 m2 g(-1) were developed. Further increases in the activation time destroyed the pore structure of activated carbons, which resulted in a decrease in the surface area and pore volume. Biotreated agricultural residues were found to be suitable precursors for producing mesoporous activated carbons. The oxygen content of activated carbons increased with increasing activation time. Results from X-ray photoelectron spectroscopy examination further suggested that H2O molecules react with the carbon surface, enhancing the deconvoluted peak area of carbonyl and carboxyl groups. Equilibrium adsorption of toluene indicated that the adsorption capacities increased with an increase in the inlet toluene concentration and a decrease in temperature. The adsorption isotherms were successfully fitted with Freundlich, Langmuir, and Dubinin-Radushkevich equations. Activated carbons derived from agricultural residues appear to be more applicable to adsorb volatile organic compounds at a low concentration and high-temperature environment.     

Kinetic, equilibrium isotherm and thermodynamic studies of Cr(VI) adsorption onto low-cost adsorbent developed from peanut shell activated with phosphoric acid

A particular agricultural waste, peanut shell, has been used as precursor for activated carbon production by chemical activation with H₃PO₄. Unoxidized activated carbon was prepared in nitrogen atmosphere which was then heated in air at a desired temperature to get oxidized activated carbon. The prepared carbons were characterized for surface area, surface morphology, and pore volume and utilized for the removal of Cr(VI) from aqueous solution. Batch mode experiments were conducted to study the effects of pH, contact time, particle size, adsorbent dose, initial concentration of adsorbate, and temperature on the adsorption of Cr(VI). Cr(VI) adsorption was significantly dependent on solution pH, and the optimum adsorption was observed at pH 2. Pseudo-first-order, pseudo-second-order, and intraparticle diffusion models were used to analyze the kinetic data obtained at different initial Cr(VI) concentrations. The adsorption kinetic data were described very well by the pseudo-second-order model. Equilibrium isotherm data were analyzed by the Langmuir, Freundlich, and Temkin models. The results showed that the Langmuir adsorption isotherm model fitted the data better in the temperature range studied. The adsorption capacity which was found to increase with temperature showed the endothermic nature of Cr(VI) adsorption. The thermodynamic parameters, such as Gibb’s Free energy change (ΔG°), standard enthalpy change (ΔH°), and standard entropy change (ΔS°) were evaluated.     

孔结构和表面化学性质对活性炭吸附性能的影响

测定了室温下3种活性炭(GAC-C、GAC-P和GAC-T)对CO2、CH4和N2的吸附性能,并对颗粒活性炭孔结构和表面化学性质进行了表征,探讨了孔结构和表面化学性质对活性炭吸附性能的影响。结果表明:由于吸附机理、孔结构、表面含氧官能团和分子极性的差异,CO2、CH4和N2在活性炭上的饱和吸附量和吸附常数的关系为CO2>CH4>N2;CH4和N2的饱和吸附量主要受活性炭微孔孔容的影响,N2和CO2饱和吸附量的差异分别是由0.572～2.0 nm的微孔和0.4～6 nm的孔引起的;CH4吸附常数主要受较大中孔和大孔影响,N2吸附常数与微孔密切相关,大孔对CO2的吸附常数影响最大。     

Phytoavailability and geospeciation of cadmium in contaminated soil remediated by Rhodobacter sphaeroides

A microorganism was isolated from oil field injection water and identified as Rhodobacter sphaeroides. It was used for the remediation of simulated cadmium-contaminated soil. The phytoavailability of Cd was investigated through wheat seedling method to determine the efficiency of remediation. It was found that after remediation, the accumulation of Cd in wheat roots and leaves decreased by 67% and 53%, respectively. The Cd speciation in soil was determined with Tessier extraction procedure. It was found that the total Cd content in soil did not change during the experiments, but the geo-speciation of Cd changed remarkably. Among the five fractions, the concentration of exchangeable phases decreased by 27-46% and that of the phases bound to Fe-Mn oxides increased by 22-44%. The decrease of Cd accumulation in wheat showed significant positive correlation with the decrease of exchangeable phases. It could be concluded that the remediation of R. sphaeroides was carried out through the conversion of Cd to more stable forms. The decrease of sulfate concentration in supernatant indicated that the R. sphaeroides consumed sulfate.     

Effects of activated carbon types and service life on removal of endocrine disrupting chemicals: amitrol, nonylphenol, and bisphenol-A

Removal performances of endocrine disrupting chemicals (EDC) such as amitrol, nonylphenol, and bisphenol-A were evaluated in this study using granular activated carbon (GAC) adsorption. This study found that GAC adsorption was effective in removal of EDCs with high K_ow value. Nonylphenol and bisphenol-A were effectively adsorbed onto all carbons (including the used carbons) tested in this study. As indicated by K_ow value, nonylphenol was more effectively adsorbed than bisphenol-A. The coal-based carbon was found more effective than other carbons in the adsorption of nonylphenol and bisphenol-A due to its larger pore volume. The adsorption capacity reduced with the operation year, and the extent of the reduction was different depending upon the carbon type and the operation year. Amitrol was effectively removed by biological degradation, but was poorly adsorbed. Since the microbes residing at the used carbons already accustomed to amitrol, the used carbons removed amitrol better than the virgin carbons. Although the coal-based carbon showed the best removal performance of amitrol, GAC adsorption could not be recommended for amitrol removal because considerable portion of incoming amitrol (9–87%) passed through GAC adsorption column. According to this study, pore volume mainly influenced the adsorption capacity, but the surface charge was also important due to electrical interaction. The adsorption parameters for nonylphenol and bisphenol-A provided by this study could be valuable when GAC adsorption was considered to handle an accidental spill of nonylphenol and bisphenol-A.     

Analysis of adsorption equilibrium for aqueous solution of weak organic electrolyte-activated carbon system

Several models for the adsorption of weak organic electrolytes on activated carbons from dilute aqueous solutions have been reported recently. It is apparent, however, that the electrokinetics of carbon surface has not been sufficiently addressed by these studies. The present treatment therefore employed the fundamental concepts provided by these studies, in conjunction with electrokinetic measurements and mass titration, to predict experimentally observed adsorption data. Important and convenient parameters for characterisation of activated carbon surfaces were thus evaluated. The interplay between reduced potential, pH and adsorption capacity were examined for adsorption of weak acidic electrolytes on untreated, oxidised and nitrided activated carbons. The best-fit parameters for aqueous adsorption on the carbon samples were also acquired.     

The role of aqueous iron(II) and manganese(II) in sub-aqueous active barrier systems containing natural clinoptilolite

Increasing attention is being placed on capping as a relatively new option in managing both contaminated sediments and dredged materials, due to its economic and environmental benefits. Capping denotes the placement of a cover onto potentially hazardous sediments or dredged material dumps to inhibit the transfer of contaminants into the water column. Retention of divalent iron and manganese cations using sandy capping layers containing natural zeolites as a reactive additive (active barrier systems, ABS) is evaluated in this study. Three different natural zeolite (clinoptilolite) rocks, two from deposits in Australia and one from a North-American deposit, were investigated and compared with respect to their mineralogical, physical and chemical properties. In particular, results from batch and column experiments show that ABS based on these materials can efficiently demobilise iron and manganese from percolating, anoxic pore water by cation exchange under favourable conditions. The retention, however, may be reduced strongly where competitive exchange with divalent cations such as calcium prevails or where mobile colloidal pore water constituents such as clay minerals or humic substances bind fractions of the dissolved iron or manganese. Therefore, the potential of ABS as a means for in situ remediation has to be evaluated diligently with particular regard to the pore water composition of the sediment to be capped.     

Removal of sorbed polycyclic aromatic hydrocarbons from soil, sludge and sediment samples using the Fenton's reagent process

The use of the Fenton's reagent process has been investigated for the remediation of environmental matrices contaminated by polycyclic aromatic hydrocarbons (PAHs). Laboratory experiments were first conducted in aqueous solutions, to study the kinetics of oxidation and adsorption of PAHs. Benzo[a]pyrene was more rapidly degraded than adsorbed, while only partial oxidation of fluoranthene occurred. In the case of benzo[b]fluoranthene, its adsorption prevented its oxidation. Besides competition effects between PAHs were found, with slower oxidation of mixtures as compared to single PAH solutions. Apparition of some by-products was observed, and a di-hydroxylated derivative of benzo[a]pyrene could be identified under our conditions. Consequently, application to solid environmental matrices (soil, sludge and sediment samples) was performed using large amounts of reagents. The efficiency of the Fenton treatment was dependent on the matrix characteristics (such as its organic carbon content) and the PAH availability (correlated to the date and level of contamination). However, no pH adjustment was required, as well as no iron addition due to the presence of iron oxides in the solid matrices, suggesting the potential application of Fenton-like treatment for the remediation of PAH-contaminated environmental solids.     

高温载硫活性炭的制备及脱汞能力研究

研究了载硫温度、硫炭比(简称S/C),吸附温度等因素对载硫活性炭的硫含量、脱汞能力以及硫损失的影响,探讨载硫活性炭制备的工艺条件优化。结果表明,不同载硫温度下制备的载硫活性炭的气态Hg0吸附能力远强于原料活性炭;载硫温度不同时,负载到活性炭孔隙或表面上的硫的形态不同,导致了脱汞能力的差异,较合适的载硫温度为350℃;S/C为5%(质量分数,下同)时,随着吸附温度的升高,载硫活性炭的气态Hg0吸附量降低;在一定的载硫温度下,原料中S/C越高时,制备的载硫活性炭的硫含量越高、气态Hg0吸附能力越强,但其硫损失率也越高,从实际的使用效果来看,较合适的S/C为10%。     

水溶性羧甲基壳聚糖对Cd2+的解吸行为研究

为改善壳聚糖(CTS)的水溶性及对重金属的配位能力,合成水溶性好并能与重金属形成配位作用的水溶性羧甲基壳聚糖(WSCC),研究了WSCC对镉的增溶、解吸行为,考察了pH、离子强度、有机质含量和WSCC初始浓度对镉的解吸影响。结果表明:WSCC对碳酸镉的增溶效果显著,当其质量浓度为2g/L时溶液中Cd2+可达到275mg/L;WSCC对镉解吸能力随着土壤中有机质含量的增加而降低,pH的升高、离子强度的增加和WSCC初始浓度的增加有利于镉的解吸;WSCC对镉污染土壤的解吸更符合准二级动力学方程,该静态解吸研究可以为镉污染土壤的修复提供基础信息及依据。     

Adsorption of mercury by activated carbon prepared from dried sewage sludge in simulated flue gas

Conversion of sewage sludge to activated carbon is attractive as an alternative method to ocean dumping for the disposal of sewage sludge. Injection of activated carbon upstream of particulate matter control devices has been suggested as a method to remove elemental mercury from flue gas. Activated carbon was prepared using various activation temperatures and times and was tested for their mercury adsorption efficiency using lab-scale systems. To understand the effect of the physical property of the activated carbon, its mercury adsorption efficiency was investigated as a function of its Brunauer–Emmett–Teller (BET) surface area. Two simulated flue gas conditions, (1) without hydrogen chloride (HCl) and (2) with 20 ppm HCl, were used to investigate the effect of flue gas composition on the mercury adsorption capacity of activated carbon. Despite very low BET surface area of the prepared sewage sludge activated carbons, their mercury adsorption efficiencies were comparable under both simulated flue gas conditions to those of pinewood and coal activated carbons. After injecting HCl into the simulated flue gas, all sewage sludge activated carbons demonstrated high adsorption efficiencies, that is, more than 87%, regardless of their BET surface area.

Implications: We tested activated carbons prepared from dried sewage sludge to investigate the effect of their physical properties on their mercury adsorption efficiency. Using two simulated flue gas conditions, we conducted mercury speciation for the outlet gas. We found that the sewage sludge activated carbon had mercury adsorption efficiency comparable to pinewood and coal activated carbons, and the presence of HCl minimized the effect of physical property of the activated carbon on its mercury adsorption efficiency.     

Preparation of activated carbon from dried pods of Prosopis cineraria with zinc chloride activation for the removal of phenol

Utilization of agrowaste materials for the production of activated carbon, as an excellent adsorbent with large surface area, is well established industrially, for dephenolation of wastewater. In the present work, dried pods of Prosopis cineraria—a novel and low-cost agrowaste material—were used to prepare activated carbons by zinc chloride activation. Batch adsorption experiments were carried out to study the effects of various physicochemical parameters such as initial phenol concentration, adsorbent dose, initial solution pH, and temperature. Pseudo-first-order second-order and diffusion kinetic models were used to identify the possible mechanisms of such adsorption process. The Langmuir and Freundlich equations were used to analyze the adsorption equilibrium. Maximum removal efficiency of 86 % was obtained with 25 mg?L^?1 of initial phenol concentration. The favorable pH for maximum phenol adsorption was 4.0. Freundlich equation represented the adsorption equilibrium data more ideally than the Langmuir. The maximum adsorption capacity obtained was 78.32 mg?g^?1 at a temperature of 30 °C and 25 mg?L^?1 initial phenol concentration. The adsorption was spontaneous and endothermic. The pseudo-second-order model, an indication of chemisorption mechanism, fitted the experimental data better than the pseudo-first-order Lagergren model. Regeneration of spent activated carbon was carried out using Pseudomonas putida MTCC 2252 as the phenol-degrading microorganism. Maximum regeneration up to 57.5 % was recorded, when loaded phenol concentration was 25 mg?L^?1. The data obtained in this study would be useful in designing and fabricating an efficient treatment plant for phenol-rich effluents.     

Distribution of heavy metals in muscle, liver and kidney of northern fur seal (Callorhinus ursinus) caught off Sanriku, Japan and from the Pribilof Islands, Alaska

The concentrations of iron, manganese, zinc, copper, cadmium, and mercury were determined in muscle, liver and kidney of 67 northern fur seals (Callorhinus ursinus) collected off Sanriku, Japan, and from the Pribilof Islands, Alaska. Almost all the elements except cadmium were highest in liver. Cadmium levels in kidney were higher than those in liver and muscle for all animals analyzed. Concentrations of mercury increased significantly with age in muscle, liver and kidney, as did iron levels in muscle and liver and cadmium levels in muscle, while manganese concentrations decreased with age in muscle and kidney. The kidney also showed decreased copper concentration with age. Cadmium concentrations of the northern fur seals in this study were higher than the other otariids, reflecting a predominantly squid diet. Concentrations of manganese and mercury were found to be higher in the fur seals caught off Sanriku than in animals from the Pribilof Islands, while those of zinc and cadmium were found to be lower. Variable concentrations of cadmium might have been attributed to those in seawaters. Discriminant analysis of heavy metal concentrations was used to identify habitat. Sixty-three of 67 animals (94%) were correctly classified using this technique. Heavy-metal concentrations in tissues may provide a useful method to elucidate the primary feeding grounds of fur seals.