Laboratory studies on the uptake of aromatic hydrocarbons by ice crystals during vapor depositional crystal growth

Uptake of aromatic hydrocarbons (AH) by ice crystals during vapor deposit growth was investigated in a walk-in cold chamber at temperatures of 242, 251, and 260 K, respectively. Ice crystals were grown from ambient air in the presence of gaseous AH namely: benzene (C₆H₆), toluene (methylbenzene, C₇H₈), the C₈H₁₀ isomers ethylbenzene, o-, m-, p-xylene (dimethylbenzenes), the C₉H₁₂ isomers n-propylbenzene, 4-ethyltoluene, 1,3,5-trimethylbenzene (1,3,5-TMB), 1,2,4-trimethylbenzene (1,2,4-TMB), 1,2,3-trimethylbenzene (1,2,3-TMB), and the C₁₀H₁₄ compound tert.-butylbenzene. Gas-phase concentrations calculated at 295 K were 10.3–20.8 μg m⁻³. Uptake of AH was detected by analyzing vapor deposited ice with a very sensitive method composed of solid-phase micro-extraction (SPME), followed by gas chromatography/mass spectrometry (GC/MS).Ice crystal size was lower than 1 cm. At water vapor extents of 5.8, 6.0 and 8.1 g m⁻³, ice crystal shape changed with decreasing temperatures from a column at a temperature of 260 K, to a plate at 251 K, and to a dendrite at 242 K. Experimentally observed ice growth rates were between 3.3 and 13.3×10⁻³ g s⁻¹ m⁻² and decreased at lower temperatures and lower value of water vapor concentration. Predicted growth rates were mostly slightly higher.Benzene, toluene, ethylbenzene, and xylenes (BTEX) were not detected in ice above their detection limits (DLs) of 25 pg g_ice⁻¹ (toluene, ethylbenzene, xylenes) and 125 pg g_ice⁻¹ (benzene) over the entire temperature range. Median concentrations of n-propylbenzene, 4-ethyltoluene, 1,3,5-TMB, tert.-butylbenzene, 1,2,4-TMB, and 1,2,3-TMB were between 4 and 176 pg g_ice⁻¹ at gas concentrations of 10.3–10.7 μg m⁻³ calculated at 295 K. Uptake coefficients (K) defined as the product of concentration of AH in ice and density of ice related to the product of their concentration in the gas phase and ice mass varied between 0.40 and 10.23. K increased with decreasing temperatures. Values of Gibbs energy (ΔG) were between −4.5 and 2.4 kJ mol⁻¹ and decreased as temperatures were lowered. From the uptake experiments, the uptake enthalpy (ΔH) could be determined between −70.6 and −33.9 kJ mol⁻¹. The uptake entropy (ΔS) was between −281.3 and −126.8 J mol⁻¹ K⁻¹. Values of ΔH and ΔS were rather similar for 4-ethlytoluene, 1,3,5-TMB and tert.-butylbenzene, whereas 1,2,3-TMB showed much higher values.     

Atmospheric PCBs and organochlorine pesticides in Birmingham,UK: concentrations,sources, temporal and seasonal trends

Concentrations of individual PCBs and DDT, DDE, α- and γ-HCH were recorded in 62 air samples of 24 h duration taken every 1–2 weeks at an urban location in Birmingham, UK between April 1999 and July 2000. Concentrations of PCBs 31/28, 52, 49, 47, 105, 149, 153, 138/164, 174, and 180 were significantly lower (p<0.05) than those recorded at the same site in 1997–1998. While DDT concentrations and DDT:DDE ratios were much lower than those recorded in southern England in 1992–1993; no such decline was observed in concentrations of α- and γ-HCH, or the α:γ-HCH ratio. These data are consistent with declining European usage of DDT, but continuing UK use of γ-HCH, and overseas use and subsequent atmospheric transport of “technical” HCH. γ-HCH concentrations displayed two non-temperature dependent peaks in spring and late summer/early autumn, consistent with agricultural use patterns. Multiple linear regression analysis was used to elucidate the relative influence of temperature, wind direction and a variety of other meteorological variables on atmospheric concentrations of PCBs. When all samples were considered, concentrations of most PCB congeners were influenced by a combination of reciprocal temperature, wind direction, and wind speed. Plotting the ratio of the Beta weightings for the regression coefficients for reciprocal temperature and sine (or cosine) of wind direction against chlorine number, revealed a general increase in the relative influence of temperature compared to wind direction with increasing chlorine number. However, when the 31 samples for which the wind speed <4.4 m s⁻¹ were analysed; only temperature and atmospheric relative humidity were influential for most congeners. This absence of influence of wind direction under relatively calm atmospheric conditions, suggests that it is medium-to-long range transport rather than local sources that exerts the greatest influence on PCB concentrations at our site.     

Size-resolved sulfate and ammonium measurements in marine boundary layer over the North and South Pacific

Marine background levels of non-sea-salt- (nss-) SO₄²⁻ (5.0–9.7 neq m⁻³), NH₄⁺ (2.1–4.4 neq m⁻³) and elemental carbon (EC) (40–80 ngC m⁻³) in aerosol samples were measured over the equatorial and South Pacific during a cruise by the R/V Hakuho-maru from November 2001 to March 2002. High concentrations of nss-SO₄²⁻ (47–94 neq m⁻³), NH₄⁺ (35–94 neq m⁻³) and EC (130–460 ngC m⁻³) were found in the western North Pacific near the coast of the Asian continent under the influence of the Asian winter monsoon. Particle size distributions of ionic components showed that the equivalent concentrations of nss-SO₄²⁻ were balanced with those of NH₄⁺ in the size range of 0.06<D<0.22 μm, whereas the concentration ratios of NH₄⁺ to nss-SO₄²⁻ in the size range of D>0.22 μm were decreased with increase in particle size. We estimated the source contributions of those aerosol components in the marine background air over the equatorial and South Pacific. Biomass burning accounted for the large fraction (80–98% in weight) of EC and the minor fraction (2–4% in weight) of nss-SO₄²⁻. Marine biogenic source accounted for several tens percents of NH₄⁺ and nss-SO₄²⁻. In the accumulation mode, 70% of particle number existed in the size range of 0.1<D<0.2 μm. In the size rage of 0.06<D<0.22 μm, the dominant aerosol component of (NH₄)₂SO₄ would be mainly derived from the marine biogenic sources.     

Mercury concentrations and air/soil fluxes in Wuchuan mercury mining district,Guizhou province,China

Wuchuan Hg mine, located in the Circum-Pacific Global Mercuriferous Belt, is one of the important Hg production centers in Guizhou province, China. Soil Hg concentrations in this area are elevated by 2–4 orders of magnitude compared to the national background value in soil which is 0.038 μg g⁻¹. In situ air Hg concentrations and air/soil Hg fluxes were measured at five sampling sites in Wuchuan Hg mining area (WMMA) from 19 to 26 December 2003 and from 18 to 25 December 2004. The results showed that air Hg concentrations were 2–4 orders of magnitude higher than those observed in background areas in Europe and North America due to a large amount of Hg emission from artisanal Hg smelting activities. The average in situ Hg fluxes at site Laohugou, Jiaoyan, Luoxi, Sankeng and Huanglong were −5493, 124, −924, −13 and 140 ng m⁻² h⁻¹, respectively. Diurnal pattern of Hg flux was not found and a number of negative Hg fluxes were observed in our sampling campaigns. The correlations between Hg fluxes and meteorological parameters such as solar irradiation, air temperature, soil temperature and relative humidity and air Hg concentrations were investigated. The commonly observed significant correlations between Hg fluxes and meteorological parameters observed in many previous studies were not obtained in WMMA. However, significantly negative correlations between Hg flux and air Hg concentration were observed at all sites. Our study demonstrated that highly elevated air Hg concentrations could suppress Hg emission processes even from Hg-enriched soil. At specific conditions in WMMA, air Hg concentrations play a dominant role in controlling Hg emission from soil.     

Levels of persistent organic pollutants in air in China and over the Yellow Sea

The occurrence of persistent toxic substances (PTS) in China and possibly their regional transport in the Yellow and East China Seas region was studied. Organochlorines in atmospheric gas-phase and particulate matter were collected by high-volume sampling (filters and polyurethane foams) during 2 weeks in June 2003 (dry season) simultaneously at a Yellow Sea coastal site in an urban area, Qingdao, China, and a rural island site, Gosan, Jeju Island, Korea. Using GC methods, the samples were analysed for 9 persistent organic pollutants (POPs) regulated under the global POP convention, namely aldrin, chlordane (cis- and trans-isomers CC and TC), DDT and metabolites (o,p′-DDT, p,p′-DDD, and p,p′-DDE), dieldrin, endrin, heptachlor, hexachlorobenzene (HCB), mirex and PCB (congeners number 28, 52, 101, 153 and 180), and for hexachlorocyclohexane (α-, β- and γ-isomers), a PTS and now considered for regulation under the convention, too. At the coastal site additionally o,p′-DDE and -DDD, β-endosulfan, isodrin, heptachlorepoxide and δ-HCH, and at the island site additionally p,p′-DDT and 12 additional PCB congeners were analysed. 9 samples were collected at the coastal and 15 (for PCBs 5) at the island site. Long-range advection pathways were determined based on analysed back-trajectory calculations.The mean concentrations of DDT and its metabolites, HCB, HCH, and PCB at the coast were in the 100–1000 pg m⁻³ range. Higher concentrations prevailed during nighttime. The levels were in general lower at the island site, but not for DDT. Local sources are likely. PCBs were even 2 orders of magnitude lower, suggesting that PCBs are not subject to regional transport but elevated concentrations in air are limited to the source areas. Organochlorine pesticide levels on the other hand were seemingly determined by regional transport over Mainland China rather than by emissions in the coastal area. The currently used pesticides mirex and chlordane were found at elevated levels, i.e. 79 (6.6–255) and 36 (<6–71) pg m⁻³, respectively, at the coast but not over the island. The POPs pesticides aldrin, dieldrin and endrin, never registered in China, were mostly found at <10 pg m⁻³ except for endrin at the coastal site (up to 400 pg m⁻³) and aldrin at the island site (up to 50 pg m⁻³).     

Field performance of dichotomous sequential PM air samplers

For over one year, the Environmental Protection Commission of Hillsborough County (EPCHC) in Tampa, Florida, operated two dichotomous sequential particulate matter air samplers collocated with a manual Federal Reference Method (FRM) air sampler at a waterfront site on Tampa Bay. The FRM was alternately configured as a PM_2.5, then as a PM₁₀ sampler. For the dichotomous sampler measurements, daily 24-h integrated PM_2.5 and PM_10–2.5 ambient air samples were collected at a total flow rate of 16.7 l min⁻¹. A virtual impactor split the air into flow rates of 1.67 and 15.0 l min⁻¹ onto PM_10–2.5 and PM_2.5 47-mm diameter PTFE^® filters, respectively. Between the two dichotomous air samplers, the average concentration, relative bias and relative precision were 13.3 μg m⁻³, 0.02% and 5.2% for PM_2.5 concentrations (n=282), and 12.3 μg m⁻³, 3.9% and 7.7% for PM_10–2.5 concentrations (n=282). FRM measurements were alternate day 24-h integrated PM_2.5 or PM₁₀ ambient air samples collected onto 47-mm diameter PTFE^® filters at a flow rate of 16.7 l min⁻¹. Between a dichotomous and a PM_2.5 FRM air sampler, the average concentration, relative bias and relative precision were 12.4 μg m⁻³, −5.6% and 8.2% (n=43); and between a dichotomous and a PM₁₀ FRM air sampler, the average concentration, relative bias and relative precision were 25.7 μg m⁻³, −4.0% and 5.8% (n=102). The PM_2.5 concentration measurement standard errors were 0.95, 0.79 and 1.02 μg m⁻³; for PM₁₀ the standard errors were 1.06, 1.59, and 1.70 μg m⁻³ for two dichotomous and one FRM samplers, respectively, which indicate the dichotomous samplers have superior technical merit. These results reveal the potential for the dichotomous sequential air sampler to replace the combination of the PM_2.5 and PM₁₀ FRM air samplers, offering the capability of making simultaneous, self-consistent determinations of these particulate matter fractions in a routine ambient monitoring mode.     

Gas/particle partitioning of polychlorinated dibenzo-p-dioxins and dibenzofurans in atmosphere; evaluation of predicting models

The gas/particle partitioning of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) was measured at three sites for a year in order to monitor the variation of PCDD/Fs levels and describe their partitioning. The air concentrations of PCDD/Fs ranged from 71 to 1161 fg I-TEQ/m³ and large changes in these levels did not correlate with seasonal changes during this study. Different homolog patterns were observed in the gas/particle phase. High chlorinated dioxin/furans dominated the particle phase while low chlorinated dioxin/furans dominated the gas phase. The high correlation coefficient between log [(PCDD/Fs_vap)(TSP)/(PCDD/Fs_pat)] and 1/T was observed in lower chlorinated dioxin/furans unlike in OCDD/F. The slope of homolog ranged from −0.410 to −1.025 and that of 2,3,7,8-substituted isomers ranged from −0.379 to −0.772 in plots of the log partition coefficient (K_p) versus the log subcooled vapor pressure (P_L°).The octanol/air partition coefficient (K_oa)-based model of PCDD/Fs is more compatible with experimental data than those of the Junge–Pankow model that tends to overestimate results, even though both models include some level of uncertainty. However, both models can underestimate the particle phase of PCDD/Fs, especially when the ambient air temperature is extremely low in winter.     

Characterization of PM2.5-bound polycyclic aromatic hydrocarbons in Atlanta

Twenty-four hour PM_2.5 samples from a rural site, an urban site, and a suburban site (next to a major highway) in the metropolitan Atlanta area in December 2003 and June 2004 were analyzed for 19 polycyclic aromatic hydrocarbons (PAH). Extraction of the air samples was conducted using an accelerated solvent extraction method followed by isotope dilution gas chromatography/mass spectrometry determination. Distinct seasonal variations were observed in total PAH concentration (i.e. significantly higher concentrations in December than in June). Mean concentrations for total particulate PAHs in December were 3.16, 4.13, and 3.40 ng m^?3 for the urban, suburban and rural sites, respectively, compared with 0.60, 0.74, and 0.24 ng m^?3 in June. Overall, the suburban site, which is impacted by a nearby major highway, had higher PAH concentration than did the urban site. Total PAH concentrations were found to be well correlated with PM_2.5, organic carbon (OC), and elemental carbon (EC) in both months (r² = 0.36–0.78, p < 0.05), although the slopes from the two months were different. PAHs represented on average 0.006% of total PM_2.5 mass and 0.017% of OC in June, compared with 0.033% of total PM_2.5 and 0.14% of OC in December. Total PAH concentrations were also correlated with potassium ion (r² = 0.39, p = 0.014) in December, but not in June, suggesting that in winter biomass burning can potentially be an important source for particulate PAH. Retene was found at a higher median air concentration at the rural site than at the urban and suburban sites—unlike the rest of the PAHs, which were found at lower levels at the rural site. Retene also had a larger seasonal difference and had the weakest correlation with the rest of the PAHs measured, suggesting that retene, in particular, might be associated with biomass burning.     

Measurement of the vapor phase deposition of polychlorinated bipheyls (PCBs) using a water surface sampler

A water surface sampler (WSS) was employed in combination with greased knife-edge surface deposition plates (KSSs) to measure the vapor phase deposition rates of PCBs to the sampler at an urban site, Chicago, IL. This sampler employed a water circulation system that continuously removed deposited PCBs. Total (gas+particle) and particulate PCB fluxes were collected with the WSS and KSSs, respectively. Gas phase PCB fluxes were then calculated by subtracting the KSS fluxes (particulate) from the WSS fluxes (gas+particle). The calculated gas phase PCB fluxes averaged 830±910 ng m⁻²d⁻¹. This flux value is, in general, higher than the fluxes determined using simultaneously measured air–water concentrations in natural waters and is in the absorption direction. This difference is primarily because the PCBs were continuously removed from the WSS water keeping the water PCB concentration near zero.Concurrently, ambient air samples were collected using a modified high volume air sampler. The gas phase PCB concentrations ranged between 1.10 and 4.46 ng m⁻³ (average±SD, 2.29±1.28 ng m⁻³). The gas phase fluxes were divided by the simultaneously measured gas phase ambient concentrations to determine the overall gas phase mass transfer coefficients (MTCs) for PCBs. The average gas phase overall MTCs (K_g) for each homolog group ranged between 0.22 and 1.32 cm s⁻¹ (0.54±0.47 cm s⁻¹). The average MTC was in good agreement with those determined using similar techniques.     

Surface ozone-temperature relationships in the eastern US: A monthly climatology for evaluating chemistry-climate models

We use long-term, coincident O₃ and temperature measurements at the regionally representative US Environmental Protection Agency Clean Air Status and Trends Network (CASTNet) over the eastern US from 1988 through 2009 to characterize the surface O₃ response to year-to-year fluctuations in weather, for the purpose of evaluating global chemistry-climate models. We first produce a monthly climatology for each site over all available years, defined as the slope of the best-fit line (m_O3-T) between monthly average values of maximum daily 8-hour average (MDA8) O₃ and monthly average values of daily maximum surface temperature (T_max). Applying two distinct statistical approaches to aggregate the site-specific measurements to the regional scale, we find that summer time m_O3-T is 3–6 ppb K^?1 (r = 0.5–0.8) over the Northeast, 3–4 ppb K^?1 (r = 0.5–0.9) over the Great Lakes, and 3–6 ppb K^?1 (r = 0.2–0.8) over the Mid-Atlantic. The Geophysical Fluid Dynamics Laboratory (GFDL) Atmospheric Model version 3 (AM3) global chemistry-climate model generally captures the seasonal variations in correlation coefficients and m_O3-T despite biases in both monthly mean summertime MDA8 O₃ (up to +10 to +30 ppb) and daily T_max (up to +5 K) over the eastern US. During summer, GFDL AM3 reproduces m_O3-T over the Northeast (m_O3-T = 2–6 ppb K^?1; r = 0.6–0.9), but underestimates m_O3-T by 4 ppb K^?1 over the Mid-Atlantic, in part due to excessively warm temperatures above which O₃ production saturates in the model. Combining T_max biases in GFDL AM3 with an observation-based m_O3-T estimate of 3 ppb K^?1implies that temperature biases could explain up to 5–15 ppb of the MDA8 O₃ bias in August and September though correcting for excessively cool temperatures would worsen the O₃ bias in June. We underscore the need for long-term, coincident measurements of air pollution and meteorological variables to develop process-level constraints for evaluating chemistry-climate models used to project air quality responses to climate change.     

Polychlorinated biphenyl spatial patterns in San Francisco Bay forage fish

Industrialized waterways frequently contain nearshore hotspots of legacy polychlorinated biphenyl (PCB) contamination, with uncertain contribution to aquatic food web contamination. We evaluated the utility of estuarine forage fish as biosentinel indicators of local PCB contamination across multiple nearshore sites in San Francisco Bay. Topsmelt (Atherinops affinis) or Mississippi silverside (Menidia audens) contamination was compared between 12 targeted sites near historically polluted locations and 17 probabilistically chosen sites representative of ambient conditions. The average sum of 209 PCB congeners in fish from targeted stations (441 ± 432 ng g^?1 wet weight, mean ± SD) was significantly higher than probabilistic stations (138 ± 94 ng g^?1). Concentrations in both species were comparable to those of high lipid sport fish in the Bay, strongly correlated with spatial patterns in sediment contamination, and above selected literature thresholds for potential hazard to fish and wildlife. The highest concentrations were from targeted Central Bay locations, including Hunter’s Point Naval Shipyard (1347 ng g^?1; topsmelt) and Stege Marsh (1337 ng g^?1; silverside). Targeted sites exhibited increased abundance of lower chlorinated congeners, suggesting local source contributions, including Aroclor 1248. These findings indicate that current spatial patterns in PCB bioaccumulation correlate with historical sediment contamination due to industrial activity. They also demonstrate the utility of naturally occurring forage fish as biosentinels of localized PCB exposure.     

Statistical and diagnostic evaluation of a new-generation urban dispersion modelling system against an extensive dataset in the Helsinki area

We have developed a modelling system for predicting the traffic volumes, emissions from stationary and vehicular sources, and atmospheric dispersion of pollution in an urban area. This paper describes a comparison of the NO_x and NO₂ concentrations predicted using this modelling system with the results of an urban air quality monitoring network. We performed a statistical analysis to determine the agreement between predicted and measured hourly time series of concentrations at four permanently located and three mobile monitoring stations in the Helsinki Metropolitan Area in 1996–1997 (at a total of ten urban and suburban measurement locations). At the stations considered, the so-called index of agreement values of the predicted and measured time series of the NO₂ concentrations vary between 0.65 and 0.82, while the fractional bias values range from −0.29 to +0.26. In comparison with corresponding results presented in the literature, the agreement between the measured and predicted datasets is good, as indicated by these statistical parameters. The seasonal variations of the NO₂ concentrations were analysed in terms of the relevant meteorological parameters. We also analysed the difference between model predictions and measured data diagnostically, in terms of meteorological parameters, including wind speed and direction (the latter separately for two wind speed classes), atmospheric stability and ambient temperature, at two monitoring stations in central Helsinki. The modelling system tends to overpredict the measured NO₂ concentrations both at the highest (u⩾6 m s⁻¹) and at the lowest wind speeds (u<2 m s⁻¹). For higher wind speeds, the modelling system overpredicts the measured NO₂ concentrations in certain wind direction intervals; specific ranges were found for both monitoring stations considered. The modelling system tends to underpredict the measured concentrations in convective atmospheric conditions, and overpredict in stable conditions. The possible physico-chemical reasons for these differences are discussed.     

Partitioning of formaldehyde between air and ice at −35°C to −5°C

The equilibrium partitioning of formaldehyde (HCHO) between air and snow was studied in a series of laboratory experiments conducted at −5°C, −15°C, and −35°C, in order to understand how partitioning of HCHO between air and polar snow varies with temperature, and thus seasonally on the ice sheet. Measured partitioning coefficients were 56, 93, and 245 mol l⁻¹ atm⁻¹ for −5°C, −15°C and −35°C, respectively, showing a similar trend as the values previously estimated from field observations. Estimates of the pseudo-first-order rate coefficient for air–snow exchange for the same three temperatures were 4.1×10⁻⁴, 1.1×10⁻⁴, and 1.1×10⁻⁵ s⁻¹, respectively. This implies a time scale for air–snow equilibration of the order of hours to days for HCHO accumulated at or near the ice–air interface on snow grains. Comparing the current laboratory partitioning coefficients with those estimated from measurements of air and freshly fallen snow in Greenland during summer demonstrates that the snow is supersaturated and should degas HCHO to the surrounding air. During this degassing, polar snow should be a significant source of HCHO to the lower troposphere.     

Atmospheric polychlorinated biphenyl concentrations and apparent degradation in coastal New Jersey

To characterize the atmospheric dynamics and behavior of organic compounds in the NY–NJ Harbor Estuary, atmospheric concentrations of polychlorinated biphenyls (PCBs) were measured at coastal, suburban and urban sites in New Jersey in 1997–1999. ∑PCB concentrations at the suburban site varied from 86 to 2300 pg m⁻³ and from 84 to 1100 pg m⁻³ at the coastal site. Although the temporal trends of total concentrations were significantly different at the three sites (p<0.01), PCB congener profiles revealed similar patterns (r²>0.90, p<0.001) implicating a dominant emission type and/or process. Temperature explained >50% of the total variability in ln[PCB] at both sites. Atmospheric concentrations at the suburban site increased when winds blew from an eastnortheast vector, while increased wind speeds led to a slight dilution. Wind speed and direction were not significantly correlated with the concentrations measured at the coastal site. Temporal changes in congener distribution at the suburban site are consistent with the preferential atmospheric removal of 3–5 Cl-biphenyls by hydroxyl radical attack with estimated half-lives of 0.7–1.8 years.     

Emissions of PCDD/Fs,PCBs, and PAHs from legacy on-road heavy-duty diesel engines

Exhaust emissions of seventeen 2,3,7,8-substituted polychlorinated dibenzo-p-dioxin/furan (PCDD/F) congeners, tetra–octa PCDD/F homologues, 12 WHO 2005 polychlorinated biphenyl (PCB) congeners, mono–nona chlorinated biphenyl homologues, and 19 polycyclic aromatic hydrocarbons (PAHs) from three legacy diesel engines were investigated. The three engines tested were a 1985 model year GM 6.2 J-series engine, a 1987 model year Detroit Diesel Corporation 6V92 engine, and a 1993 model year Cummins L10 engine. Results were compared to United States’ mobile source inventory for on-road diesel engines, as well as historic and modern diesel engine emission values. The test fuel contained chlorine at 9.8 ppm which is 1.5 orders of magnitude above what is found in current diesel fuel and 3900 ppm sulfur to simulate fuels that would have been available when these engines were produced. Results indicate PCDD/F emissions of 13.1, 7.1, and 13.6 pg International Toxic Equivalency (I-TEQ) L⁻¹ fuel consumed for the three engines respectively, where non-detects are equal to zero. This compares with a United States’ mobile source on-road diesel engine inventory value of 946 pg I-TEQ L⁻¹ fuel consumed and 1.28 pg I-TEQ L⁻¹ fuel consumed for modern engines equipped with a catalyzed diesel particle filter and urea selective catalytic reduction. PCB emissions are 2 orders of magnitude greater than modern diesel engines. PAH results are representative of engines from this era based on historical values and are 3–4 orders of magnitude greater than modern diesel engines.     

Prevalence of low chlorinated dibenzo-p-dioxin/dibenzofurans in human serum

Mono- to tri-chlorinated dibenzo-p-dioxin/dibenzofurans (DD/Fs) have not been studied as extensively as the 17 toxic 2,3,7,8-substituted congeners. In this study for the first time, mono- to octa-chlorinated DD/Fs were analyzed for seventy one human serum samples collected from incinerator workers as well as residents living near and far from the facility. The mean concentrations of ∑Cl_1–8DD/Fs and 17-toxic congeners were 1890 and 398 pg g^?1 lipid (11.9 TEQ pg g^?1 lipid), respectively. 2,3,4,7,8-PeCDF, 1,2,3,7,8-PeCDD, and 1,2,3,6,7,8-HxCDD were predominant congeners that accounted for more than 78% of the TEQ concentrations. The profile for polychlorinated dibenzo-p-dioxins (PCDDs) was dominated by the most chlorinated congener, OCDD (>58%), while decreasing concentrations with increasing degree of chlorination were seen for polychlorinated dibenzofurans (PCDFs); MoCDFs (>83%) and DiCDFs (>6%). ∑Cl_1–3DD/Fs accounted for 77% of the serum concentrations of ∑Cl_1–8DD/Fs. These findings confirm that human beings are exposed to a large amount of ∑Cl_1–3DD/Fs. Moreover, MoCDFs contributed more than 60% of the ∑Cl_1–8DD/Fs and was highly correlated with ∑Cl_1–8DD/Fs. Thus, 2-MoCDF could be a predictive indicator for ∑Cl_1–8DD/Fs (r_s = 0.96), and the combination of 2-MoCDF and OCDD could explain the 95.9% variation in the serum of ∑Cl_1–8DD/Fs. These results suggest that low chlorinated DD/Fs should be studied extensively until these low chlorinated congeners will have been elucidated for their toxicities.     

PM2.5–10, PM2.5 and associated water-soluble inorganic species at a coastal urban site in the metropolitan region of Rio de Janeiro

The concentrations of PM_2.5−10, PM_2.5 and associated water-soluble inorganic species (WSIS) were determined in a coastal site of the metropolitan region of Rio de Janeiro, Southeastern Brazil, from October 1998 to September 1999 (n=50). Samples were dissolved in water and analyzed for major inorganic ions. The mean (± standard deviation; median) concentrations of PM_2.5−10 and PM_2.5 were, respectively, 26 (± 16; 21) μg m⁻³ and 17 (± 13; 14) μg m⁻³. Their mean concentrations were 1.7–1.8 times higher in dry season (May–October) than in rainy season (November–April). The WSIS comprised, respectively, 34% and 28% of the PM_2.5−10 and PM_2.5 masses. Chloride, Na⁺ and Mg²⁺ were the predominant ions in PM_2.5−10, indicating a significant influence of sea-salt aerosols. In PM_2.5, SO₄²⁻ (∼97% nss-SO₄²⁻) and NH₄⁺ were the most abundant ions and their equivalent concentration ratio (SO₄²⁻/NH₄⁺ ∼1.0) suggests that they were present as (NH₄)₂SO₄ particles. The mean concentration of (NH₄)₂SO₄ was 3.4 μg m⁻³. The mean equivalent PM_2.5 NO₃⁻ concentration was eight times smaller than those of SO₄²⁻ and NH₄⁺. The PM_2.5 NO₃⁻ concentration in dry season was three times higher than in rainy season, probably due to reaction of NaCl (sea salt) with HNO₃ as a result of higher levels of NO_y during the dry season and/or reduced volatilization of NH₄NO₃ due to lower wintertime temperature. Chloride depletion was observed in both size ranges, although more pronouncely in PM_2.5.     

The effect of humidity and state of water surfaces on deposition of aerosol particles onto a water surface

Deposition processes of particles with dry diameter larger than about 10 μm are dominated by gravitational settling, while molecular diffusion and Brownian motion predominate the deposition processes of particles smaller than 0.1 μm in dry diameter. Many air pollution derived elements exhibit characteristics common to sub-micron particles. The objective of the present study is to examine the effects of meteorological conditions within the turbulent transfer layer on the deposition velocity of particles with dry diameter between 0.1 and 1 μm. It is for these sub-micron particles that particle growth by condensation in the deposition layer, the broken water surface effect and the enhanced transfer process due to atmospheric turbulence in the turbulent transfer layer play important roles in controlling the particle deposition velocity. Results of the present study show that the `dry air’ assumption of Williams’ model is unrealistic. Effects of ambient air relative humidity and water surface temperature cannot be ignored in determining the deposition velocity over a water surface. Neglecting effects of ambient air relative humidity and water surface temperature will result in defining atmospheric stability incorrectly. It is found that the largest effect of air relative humidity on deposition velocity occurs at an air–water temperature difference corresponding to the point of `displaced neutral stability'. For a given wind speed of U=5 m s⁻¹ the additive effects of water surface temperature, T_w, changes from 5 to 25°C and ambient air relative humidity variations from 85 to 60%, respectively, lead to a maximum difference in v_d of about 20%. For a higher wind speed of 10 m s⁻¹, however, the corresponding change in v_d reduces to less than 5%. This is further confirmation that wind speed is one of the strongest variables that governs the magnitude of v_d. The present study also found that the broken surface transfer coefficient, k_bs, given as a multiple of the smooth surface transfer coefficient, k_ss, is physically more meaningful than assigning it a constant value independent of particle size. The method used in this study requires only a single level of atmospheric data coupled with the surface temperature measurement. The present method is applicable for determining deposition velocity not only at the conventional measurement height of 10 m but also at any other heights that are different from the measurement height.     

Atmospheric deposition of organochlorine contaminants to Galveston Bay,Texas

Atmospheric monitoring of PCBs and chlorinated pesticides (e.g., HCHs, chlordanes, and DDTs) in Galveston Bay was conducted at Seabrook, Texas. Air and wet deposition samples were collected from 2 February 1995 and continued through 6 August 1996. Vapor total PCB (tPCB) concentrations in air ranged from 0.21 to 4.78 ng m⁻³ with a dominance of tri-chlorinated PCBs. Dissolved tPCBs in rain ranged from 0.08 to 3.34 ng l⁻¹, with tetra-chlorinated PCBs predominating. The predominant isomers found in air and rain were α- and γ-HCH, α- and γ-chlordanes, 4,4′-DDT, and dieldrin. The concentrations of PCBs and pesticides in the air and rain revealed no clear seasonal trend. Elevated levels of PCBs in the air occurred when temperatures were high and wind came from urban and industrialized areas (S, SW, NW, and W of the site). Concentrations of HCHs were elevated in April, May, and October, perhaps due to local and/or regional applications of γ-HCH (lindane). Other pesticides showed no notable temporal variation. When winds originated from the Gulf of Mexico (southeasterly), lower concentrations of organochlorines were detected in the air. The direct deposition rate (wet+dry) of PCBs to Galveston Bay (6.40 μg m⁻² yr⁻¹) was significantly higher than that of pesticides by a factor of 5–10. The net flux from gas exchange estimated for PCBs was from Galveston Bay water to the atmosphere (78 μg m⁻² yr⁻¹). Gas exchange of PCBs from bay water to the atmosphere was the dominant flux.     

Persistent organochlorine pollutants and menstrual cycle characteristics

An evolving body of evidence suggests an adverse relation between persistent organochlorine pollutants (POPs) and menstruation, though prospective longitudinal measurement of menses is limited and served as the impetus for study. We prospectively assessed the relation between a mixture of persistent organochlorine compounds and menstrual cycle length and duration of bleeding in a cohort of women attempting to become pregnant. Eighty-three (83%) women contributing 447 cycles for analysis provided a blood specimen for the quantification of 76 polychlorinated biphenyls and seven organochlorine pesticides, and completed daily diaries on menstruation until a human chorionic gonadotropin confirmed pregnancy or 12 menstrual cycles without conception. Gas chromatography with electron capture detection was used to quantify concentrations (ng g⁻¹ serum); enzymatic methods were used to quantify serum lipids (mg dL⁻¹). A linear regression model with a mixture distribution was used to identify chemicals grouped by purported biologic activity that significantly affected menstrual cycle length and duration of bleeding adjusting for age at menarche and enrollment, body mass index, and cigarette smoking.A significant 3-d increase in cycle length was observed for women in the highest tertile of estrogenic PCB congeners relative to the lowest tertile (β = 3.20; 95% CI 0.36, 6.04). A significant reduction in bleeding (<1 d) was observed among women in the highest versus lowest tertile of aromatic fungicide exposure (γ = −0.15; 95% CI −0.29, −0.00). Select POPs were associated with changes in menstruation underscoring the importance of assessing chemical mixtures for female fecundity.